Effect of structure-property relationships on fatigue failure in natural fibres

The fatigue behaviour of natural fibres is important for fibre processing efficiency as well as the properties and performance of products made from these fibres. This chapter presents some fibre fatigue results obtained from various experimental methods and testing conditions. It demonstrates that many factors, including fibre structure and chemical treatments, affect the fatigue failure in natural fibres. Examples of controlling fibre fatigue life for different purposes are also presented. Knowledge of the fatigue behaviour of natural fibres will help product design and care.

Development of a contact probe incorporating a bragg grating strain sensor for nano coordinate measuring machines

This paper presents a novel optical fibre based micro contact probe system with high sensitivity and repeatability. In this optical fibre probe with a fused spherical tip, a fibre Bragg grating has been utilized as a strain sensor in the probe stem. When the probe tip contacts the surface of the part, a strain will be induced along the probe stem and will produce a Bragg wavelength shift. The contact signal can be issued once the wavelength shift signal is produced and demodulated. With the fibre grating sensor element integrated into the probe directly, the probe system shows a high sensitivity. In this work, the strain distributions along the probe stem with the probe under axial and lateral load are analysed. A simulation of the strain distribution was performed using the finite element package ANSYS 11. Performance tests using a piezoelectric transducer stage with a displacement resolution of 1.5 nm yielded a measurement resolution of 60 nm under axial loading.

Cuticle modifications and dyeing property of ultrasonically scoured wool

Ultrasonics has the potential to reduce the cost and environmental impact of textile processing. This work investigates the effects of utrasonic irradiation during wool scouring on fibre surface properties and fibre dyeing rate. A range of ultrasonic frequencies were used in the scouring bath to examine the forms of fibre cuticle damage. It was shown that ultrasonically scoured wool underwent some modifications of the fibre surface structure which resulted in a higher rate of dye uptake by the fibres, when compared with the conventionally scoured wool. The lower the ultrasonic frequency the more sever was the cuticle damage to wool during scouring, hence the higher the fibre dye uptake.

Influence of stocking rate and mixed grazing of Angora goats and Merino sheep on animal and pasture production in southern Australia : 3 : mohair and wool production and quality

The effects of animal species (AS; Angora goats, Merino sheep, mixed-grazed goats and sheep at the ratio of 1:1) and stocking rate (SR; 7.5, 10 and 12.5 animals/ha) on fibre production and quality were determined in a replicated experiment on improved annual temperate pastures in southern Australia from 1981 to 1984. Separately grazed sheep produced the most total clean fibre/ha at each SR. Mixed-grazed treatments produced amounts of clean fibre/ha similar to the arithmetic mean of sheep and goat treatments at 7.5/ha (21.9 versus 21.3 kg/ha), 10% more at 10/ha (28.3 versus 25.3 kg/ha, P < 0.05) and 7% more at 12.5/ha (31.6 versus 29.6 kg/ha, P < 0.10). Clean wool production/head was affected by AS and SR but not year. Clean mohair production was affected by SR and year but not AS. Variation in mean fibre diameter (MFD) accounted for 67 and 71%, respectively, of the variation in clean wool and clean mohair production/head. There was an AS SR interaction for clean fibre production/t pasture. Growth rate of mohair was highest in autumn and least in summer. In each season, an increase in the SR reduced the clean mohair growth rate. Growth rate of wool was highest in spring and least in summer. Wool and mohair MFD were affected by an AS SR interaction. Mohair MFD was also affected by year and season. At 10/ha, wool from mixed-grazed sheep had a greater MFD than wool from separately grazed sheep (20.2 versus 18.9 μm) and mixed-grazed goats grew mohair 1 μm coarser than separately grazed goats. At 12.5/ha mixed-grazed goats grew mohair 1.9 μm finer than separately grazed goats. Mohair MFD was predicted by a multiple regression that included average liveweight for the period of fleece growth, season of growth (summer 1 μm finer than winter) and year (range 1.27 μm). Mohair MFD increased 4.7 μm/10 kg increase in average fleece-free liveweight (P = 6.4 10-14). Fleece-free liveweight alone accounted for 76.4% of the variation in mohair MFD. There was an AS SR interaction for the incidence of kemp and medullated fibres; under severe grazing pressure their incidence was suppressed. This experiment indicated that the principles associated with the effects of SR on wool production on annual temperate pastures apply to mohair production. Mixed grazing of Merino sheep and Angora goats produced complementary and competitive effects depending on the SR. Angora goats should not be grazed alone or mixed-grazed with sheep on annual temperate pastures at SR greater than that recommended for Merino sheep.

Characterisation of an out-of-autoclave resin film infusion process for textile composites

A new method to manufacture damage tolerant textile composites, which combines Resin Film Infusion with a fast and cost·efficient curing technology QuickstepTM, was investigated. The effect of process parameters on resin flow through carbon fibre preforms was analysed and model-based parameter optimisation resulted in considerable improvement of resin flow properties.

Storm water harvesting and reuse in Australia : enhanced sand filtration for the treatment of storm water

This study details the removal of common storm water pollutants along with heavy metals by enhanced sand filtration. Three filtration flow rates were trialled: 5, 10 and 20 m/h. The performance of each filter was rated on the ability to remove turbidity, suspended solids, dissolved solids, phosphorus, nitrogen, lead, copper and Zinc. Conventional sand filter was used as a performance benchmark, and compared with four sand filters that are enhanced with a nylon carpet fibre, polypropylene carpet fibre, Syrian carpet fibre-enhanced and alum sludge-enhanced sand filter. Carpet fibre-enhanced sand filtration was highly effective at filtering simulated storm water and in most cases performing well above the conventional sand filters. The carpet fibre-enhanced sand filters had no drop in flow rates over the 4 h filtration period with following removal rates: up to 90% total suspended solids, 70% zinc, 60% turbidity, 25% phosphorus, 15% nitrogen and 10% total dissolved solids. However, results showed that alum sludge-enhanced sand filter performed the highest, with removal rates up to 100% for total suspended solids, 80% zinc, 90% turbidity, up to 80% phosphorus, up to 40% nitrogen and 3% total dissolved solids. But the flow rates dropped approximately two-thirds of the original flow rates within the first hour. © 2014 © 2014 Balaban Desalination Publications. All rights reserved.

Effectiveness of different solid-phase microextraction fibres for differentiation of selected Madeira island fruits based on their volatile metabolite profile: identification of novel compounds

A headspace solid-phase microextraction (HS-SPME) procedure based on five commercialised fibres (85 μm polyacrylate – PA, 100 μm polydimethylsiloxane – PDMS, 65 μm polydimethylsiloxane/divinylbenzene – PDMS/DVB, 70 μm carbowax/divinylbenzene – CW/DVB and 85 μm carboxen/polydimethylsiloxane – CAR/PDMS) is presented for the characterization of the volatile metabolite profile of four selected Madeira island fruit species, lemon (Citrus limon), kiwi (Actinidia deliciosa), papaya (Carica papaya L.) and Chickasaw plum (Prunus angustifolia). The isolation of metabolites was followed by thermal desorption gas chromatography–quadrupole mass spectrometry (GC–qMS) methodology. The performance of the target fibres was evaluated and compared. The SPME fibre coated with CW/DVB afforded the highest extraction efficiency in kiwi and papaya pulps, while in lemon and plum the same was achieved with PMDS/DVB fibre. This procedure allowed for the identification of 80 compounds, 41 in kiwi, 24 in plums, 23 in papaya and 20 in lemon. Considering the best extraction conditions, the most abundant volatiles identified in kiwi were the intense aldehydes and ethyl esters such as (E)-2-hexenal and ethyl butyrate, while in Chicasaw plum predominate 2-hexenal, 2-methyl-4-pentenal, hexanal, (Z)-3-hexenol and cyclohexylene oxide. The major compounds identified in the papaya pulp were benzyl isothiocyanate, linalool oxide, furfural, hydroxypropanone, linalool and acetic acid. Finally, lemon was shown to be the most divergent of the four fruits, being its aroma profile composed almost exclusively by terpens, namely limonene, γ-terpinene, o-cymene and α-terpinolene. Thirty two volatiles were identified for the first time in the fruit or close related species analysed and 14 volatiles are reported as novel volatile metabolites in fruits. This includes 5 new compounds in kiwi (2-cyclohexene-1,4-dione, furyl hydroxymethyl ketone, 4-hydroxydihydro-2(3H)-furanone, 5-acetoxymethyl-2-furaldehyde and ethanedioic acid), 4 in plum (4-hydroxydihydro-2(3H)-furanone, 5-methyl-2-pyrazinylmethanol, cyclohexylene oxide and 1-methylcyclohexene), 4 in papaya (octaethyleneglycol, 1,2-cyclopentanedione, 3-methyl-1,2-cyclopentanedione and 2-furyl methyl ketone) and 2 in lemon (geranyl farnesate and safranal). It is noteworthy that among the 15 volatile metabolites identified in papaya, 3-methyl-1,2-cyclopentanedione was previously described as a novel PPARγ (peroxisome proliferator-activated receptor γ) agonist, having a potential to minimize inflammation.

Effects of adding a spray-dried polyclonal antibody preparation on ruminal fermentation patterns and digestibility of cows fed high concentrate diets

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Histochemical study of the extensor digitorum longus and soleus muscles in alcoholic rats

The extensor digitorum longus (EDL) and soleus (SOL) muscle fibres from albino rats submitted to experimental chronic alcoholism were evaluated in accordance with their metabolic and morphometric profiles. Twenty-seven male animals aged 4 months and weighing approximately 400 g were used. The animals were divided into three groups: control, isocaloric and alcoholic and sacrifices were carried out after 5, 10 and 15 months. The muscles were dissected, removed, cross-sectioned in a cryostat and submitted to the NADH (nicotinamide adenine dinucleotide) reaction. The SO (slow-twitch-oxidative), FG (fast-twitch-glycolytic) and FOG (fast-twitch-oxidative-glycolytic) muscle fibre types exhibited a polygonal, triangular or rounded shape and did not present noteworthy modifications in either muscles during the study. The cross-sectional areas of the fibres from the studied muscles did not present significant differences during the observations. Fibre area behaved similarly in the alcoholic animals up to the 10th month, i.e. it was decreased, as also observed in the other groups. At 15 months, however, all fibres were increased, with a predominance of FG fibres in the SOL muscle. Changes in fibre population were observed mainly in the SOL muscle of alcoholic animals: SO fibres were initially increased in number but decreased after the 10th month, and the opposite was observed for the population of FG fibres. FOG fibres increased linearly in number throughout the experiment. The statistical analysis showed nevertheless that the fibre population and cross-sectional area changes were not significant. In the alcoholic animals quantitative variations of muscle fibres were more evident in the SOL muscle, suggesting that the SOL muscle is more sensitive to the toxic action of ethanol. The results concerning the increased fibre diameter in alcoholic animals would be associated with muscle oedema induced directly or indirectly by the ethanol.

Enzyme effects on extruded diets for dogs with soybean meal as a substitute for poultry by-product meal

The effects of exogenous enzymes supplementation on kibble diets for dogs formulated with soybean meal (SBM) as a substitute for poultry by-product meal (PM) was investigated on nutrient digestibility, fermentation products formation, post-prandial urea response and selected faecal bacteria counts. Two kibble diets with similar compositions were used in two trials: PM-based diet (28.9% of PM; soybean hulls as a fibre source) and SBM-based diet (29.9% of SBM). In experiment 1, the SBM diet was divided into three diets: SBM-0, without enzyme addition; SBM-1, covered after extrusion with 7500U protease/kg and 45U cellulase/kg; and SBM-2, covered with 15000U protease/kg and 90U cellulase/kg. In experiment 2, the SBM diet was divided into three diets: SBM-0; SBM-1, covered with 140U protease/kg; 8U cellulase/kg, 800U pectinase/kg, 60U phytase/kg, 40U betaglucanase/kg and 20U xylanase/kg; and SMB-2, covered with 700U protease/kg, 40U cellulase/kg, 4000U pectinase/kg, 300U phytase/kg, 200U betaglucanase/kg and 100U xylanase/kg. Each experiment followed a block design with six dogs per diet. Data were submitted to analysis of variance and means compared by orthogonal and polynomial contrasts (p<0.05). In both experiments, nutrients and energy digestibility did not differ between diets (p>0.05). SBM consumption resulted in increased faecal moisture and production (p<0.05), without effect on faecal score. Higher concentration of propionate, acetate and lactate, and lower ammonia and pH were found in the faeces of dogs fed SBM (p<0.05). Higher post-prandial urea was verified in dogs fed SBM (p<0.05). In experiment 2, the addition of enzymes increased faecal concentration of propionate, acetate and total short-chain fatty acid (p<0.05) and tended to reduce post-prandial urea concentration (p=0.06). Although with similar digestibility, SBM shows a worse utilization of absorbed amino acids than the PM. Soybean oligosaccharides can beneficially change gut fermentation product formation. Enzymes can increase the gut fermentation activity and improve the SBM proteic value. © 2013 Blackwell Verlag GmbH.

Innervazione articolare della spalla e del ginocchio nel cane e modificazioni in corso di osteoartrite

L’osteoartrite (OA) rappresenta un gruppo di patologie a carico delle articolazioni che si stima colpisca più del 20% dei cani con età superiore a un anno. Si tratta di una condizione dove entrano in gioco fattori biomeccanici e biochimici, che si esprime clinicamente con zoppia e dolore. Le ricerche effettuate negli ultimi decenni hanno dimostrato il coinvolgimento dell’innervazione nocicettiva e simpatica nell’insorgenza e nel mantenimento del dolore e dell’infiammazione che caratterizzano l’OA. In questa, infatti, svolgono un ruolo cruciale i neuropeptidi, quali la sostanza P (SP) ed il peptide correlato al gene della calcitonina (CGRP), ed i neuromediatori simpatici liberati alla periferia rispettivamente dalle fibre nocicettive e dalle fibre simpatiche postgangliari. Col presente lavoro ci si è posti l’obiettivo di definire il tipo ed il numero di fibre nervose che innervano l’articolazione della spalla e del ginocchio di cane in soggetti esenti da patologia articolare ed affetti da osteoartrite. Campioni di legamenti e capsula articolare della spalla e della parte craniolaterale della capsula articolare del ginocchio sono stati sottoposto a reazione di doppia immunofluorescenza indiretta volta alla identificazione del numero complessivo di fibre nervose presenti e della percentuale di fibre SP, CGRP e simpatiche positive. I risultati testimoniano come in corso di OA nel cane venga ad alterarsi l’equilibrio tra innervazione sensitiva e simpatica. Infatti, lo studio quantitativo ha evidenziato che nei soggetti affetti da OA si assiste ad un incremento della percentuale di fibre SP positive e ad un decremento di quelle simpatiche. Si ritiene che l’integrità di questi due tipi d’innervazione sia necessaria per l’omeostasi tissutale e che un aumento delle fibre nocicettive e una riduzione di quelle simpatiche abbia un effetto proinfiammatorio e iperalgesico. È stata inoltre riscontrata una differente densità di fibre nervose a seconda del tipo di patologia considerata.

Complessi dinucleari di ferro con leganti a ponte per la produzione elettrocatalitica di idrogeno

Il forte incremento della popolazione mondiale, la continua crescita del tenore di vita e del livello di consumi hanno portato negli ultimi decenni ad un enorme aumento della richiesta mondiale di energia. Diviene pertanto fondamentale ricercare nuovi metodi altamente efficienti di produzione, trasporto ed utilizzo di energia, che migliorino la qualità della vita dell’uomo e nello stesso tempo salvaguardino il clima e l’ambiente. Proprio a questo proposito, in questi ultimi anni, vi è un crescente interesse nei riguardi della molecola di idrogeno, H2. Ad oggi è impossibile sostituire i combustibili fossili con l’idrogeno, per motivi prettamente tecnologici (difficoltà nello stoccaggio e nel trasporto) e per motivi legati alla sua produzione. Infatti, l’idrogeno è sì uno degli elementi più presenti in natura, ma non come sostanza gassosa pura bensì in forma combinata, generalmente acqua, quindi per produrlo è necessario rompere il legame con l’elemento con cui è combinato, consumando energia; questo spiega il motivo per cui l’idrogeno viene considerato un vettore di energia e non una fonte di energia. La produzione di idrogeno, o meglio del suo equivalente costituito da un flusso di elettroni e protoni, dall’acqua è un processo che avviene in natura, precisamente nelle cellule vegetali durante la prima fase della fotosintesi clorofilliana. Tale processo mostra l’importanza dei complessi bio-inorganici che vi partecipano, ai quali si ispira la ricerca di nuovi efficienti catalizzatori per la produzione di idrogeno mediante scissione catalitica dell’acqua (water splitting). Una classe di enzimi particolarmente studiata, in quest’ambito, è costituita dalle idrogenasi; la maggior parte di questi enzimi contengono un frame dinucleare Ni-Fe o Fe-Fe. Numerosi gruppi di ricerca sono fortemente impegnati nell’obiettivo di sintetizzare complessi simili a questi enzimi (enzyme mimics), e con prestazioni paragonabili, in modo da produrre idrogeno in modo efficiente e rispettando i principi di sostenibilità ambientale ed economica. Il gruppo di ricerca presso il quale è stato svolto il tirocinio oggetto del presente elaborato si occupa dello studio di complessi metallorganici caratterizzati dalla presenza di un “core” metallico costituito da due atomi di Ferro adiacenti coordinati tra loro mediante leganti a ponte diversamente funzionalizzati. Obiettivo del tirocinio è stato quello di verificare l’efficienza catalitica di alcuni di questi complessi nel promuovere il processo di interconversione H+/H2; per fare ciò, si è fatto ricorso ad un approccio elettrochimico, sfruttando la tecnica della voltammetria ciclica.

A new method for continuous quality control of nsm cfrp systems

In the last decade the near-surface mounted (NSM) strengthening technique using carbon fibre reinforced polymers (CFRP) has been increasingly used to improve the load carrying capacity of concrete members. Compared to externally bonded reinforcement (EBR), the NSM system presents considerable advantages. This technique consists in the insertion of carbon fibre reinforced polymer laminate strips into pre-cut slits opened in the concrete cover of the elements to be strengthened. CFRP reinforcement is bonded to concrete with an appropriate groove filler, typically epoxy adhesive or cement grout. Up to now, research efforts have been mainly focused on several structural aspects, such as: bond behaviour, flexural and/or shear strengthening effectiveness, and energy dissipation capacity of beam-column joints. In such research works, as well as in field applications, the most widespread adhesives that are used to bond reinforcements to concrete are epoxy resins. It is largely accepted that the performance of the whole application of NSM systems strongly depends on the mechanical properties of the epoxy resins, for which proper curing conditions must be assured. Therefore, the existence of non-destructive methods that allow monitoring the curing process of epoxy resins in the NSM CFRP system is desirable, in view of obtaining continuous information that can provide indication in regard to the effectiveness of curing and the expectable bond behaviour of CFRP/adhesive/concrete systems. The experimental research was developed at the Laboratory of the Structural Division of the Civil Engineering Department of the University of Minho in Guimar\~aes, Portugal (LEST). The main objective was to develop and propose a new method for continuous quality control of the curing of epoxy resins applied in NSM CFRP strengthening systems. This objective is pursued through the adaptation of an existing technique, termed EMM-ARM (Elasticity Modulus Monitoring through Ambient Response Method) that has been developed for monitoring the early stiffness evolution of cement-based materials. The experimental program was composed of two parts: (i) direct pull-out tests on concrete specimens strengthened with NSM CFRP laminate strips were conducted to assess the evolution of bond behaviour between CFRP and concrete since early ages; and, (ii) EMM-ARM tests were carried out for monitoring the progressive stiffness development of the structural adhesive used in CFRP applications. In order to verify the capability of the proposed method for evaluating the elastic modulus of the epoxy, static E-Modulus was determined through tension tests. The results of the two series of tests were then combined and compared to evaluate the possibility of implementation of a new method for the continuous monitoring and quality control of NSM CFRP applications.

Le Traduzioni del Corano in Occidente

Ho deciso di documentarmi e di scrivere riguardo la traduzione del Corano e la sua storia in Occidente, in particolare in Italia, per poter comprendere meglio la cultura e il punto di vista di un popolo tanto simile quanto diverso dal mio. In seguito alla mia esperienza personale in Giordania e agli studi svolti fin’ora, mi sono resa conto di come la conoscenza di questo testo, anche se parziale, sia indispensabile per chiunque desideri entrare in contatto col mondo arabo. Riconoscendo le mie lacune in materia e intenzionata a proseguire con lo studio della lingua araba, ho deciso di rimediare scrivendo una tesi che potesse essere uno strumento utile per me, ma anche per tutti gli studenti futuri che, come me, desidereranno approfondire lo studio della cultura araba, oltre a quello della lingua. Dopo una breve introduzione sulla struttura e sulle origini storico-religiose del testo maomettano, proseguirò dunque la mia tesi sulla traduzione del Corano, concentrandomi sulle primissime versioni tradotte in Occidente e, in particolare, sulla prima traduzione italiana del testo sacro all’Islam. Fondamentale per lo studio del Corano e della sua traduzione è stato lo studio della storia, specialmente l’analisi del XVI secolo. Il passaggio dalla fine del Medioevo all’inizio dell’Età moderna porta infatti una serie di cambiamenti, rivoluzioni tecnologiche e filosofiche uniche nella storia europea e mondiale. Oltre ad aver ricercato la storia e tutte le informazioni utili sulle prime traduzioni del Corano in Europa, mi sono anche documentata sulle versioni più moderne, citando sia quelle di traduttori europei in generale, che quelle di autori italiani. Infine ho confrontato le due versioni de ‘Il Corano’ tradotte in lingua italiana da Bausani e Riccardo Hamza Piccardo: il primo studioso attento e traduttore esperto, il secondo religioso che rifiuta la traduzione classica per la traduzione interpretativa.

Polymer interaction with macroscopic carbon nanotube fibres and fabrication of nanostructured composites

El ensamblado de nanotubos de carbono (CNT) como una fibra macroscópica en la cual están orientados preferentemente paralelos entre sí y al eje de la fibra, ha dado como resultado un nuevo tipo de fibra de altas prestaciones derivadas de la explotación eficiente de las propiedades axiales de los CNTs, y que tiene un gran número de aplicaciones potenciales. Fibras continuas de CNTs se produjeron en el Instituto IMDEA Materiales mediante el proceso de hilado directo durante la reacción de síntesis por deposición química de vapores. Uno de los objetivos de esta tesis es el estudio de la estructura de estas fibras mediante técnicas del estado del arte de difracción de rayos X de sincrotrón y la elaboración de un modelo estructural de dicho material. Mediciones texturales de adsorción de gases, análisis de micrografías de electrones y dispersión de rayos X de ángulo alto y bajo (WAXS/SAXS) indican que el material tiene una estructura mesoporosa con una distribución de tamaño de poros ancha derivada del amplio rango de separaciones entre manojos de CNTs, así como una superficie específica de 170m2/g. Los valores de dimensión fractal obtenidos mediante SAXS y análisis Barrett-Joyner-Halenda (BJH) de mediciones texturales coinciden en 2.4 y 2.5, respectivamente, resaltando el carácter de red de la estructura de dichas fibras. La estructura mesoporosa y tipo hilo de las fibra de CNT es accesible a la infiltración de moléculas externas (líquidos o polímeros). En este trabajo se estudian los cambios en la estructura multiescala de las fibras de CNTs al interactuar con líquidos y polímeros. Los efectos de la densificación en la estructura de fibras secas de CNT son estudiados mediante WAXS/SAXS. El tratamiento de densificación junta los manojos de la fibra (los poros disminuyen de tamaño), resultando en un incremento de la densidad de la fibra. Sin embargo, los dominios estructurales correspondientes a la transferencia de esfuerzo mecánica y carga eléctrica en los nanotubos no son afectados durante este proceso de densificación; como consecuencia no se produce un efecto sustancial en las propiedades mecánicas y eléctricas. Mediciones de SAXS and fibra de CNT antes y después de infiltración de líquidos confirman la penetración de una gran cantidad de líquidos que llena los poros internos de la fibra pero no se intercalan entre capas de nanotubos adyacentes. La infiltración de cadenas poliméricas de bajo peso molecular tiende a expandir los manojos en la fibra e incrementar el ángulo de apertura de los poros. Los resultados de SAXS indican que la estructura interna de la fibra en términos de la organización de las capas de tubos y su orientación no es afectada cuando las muestras consisten en fibras infiltradas con polímeros de alto peso molecular. La cristalización de varios polímeros semicristalinos es acelerada por la presencia de fibras de CNTs alineados y produce el crecimiento de una capa transcristalina normal a la superficie de la fibra. Esto es observado directamente mediante microscopía óptica polarizada, y detectado mediante calorimetría DSC. Las lamelas en la capa transcristalina tienen orientación de la cadena polimérica paralela a la fibra y por lo tanto a los nanotubos, de acuerdo con los patrones de WAXS. Esta orientación preferencial se sugiere como parte de la fuerza impulsora en la nucleación. La nucleación del dominio cristalino polimérico en la superficie de los CNT no es epitaxial. Ocurre sin haber correspondencia entre las estructuras cristalinas del polímero y los nanotubos. Estas observaciones contribuyen a la compresión del fenómeno de nucleación en CNTs y otros nanocarbonos, y sientan las bases para el desarrollo de composites poliméricos de gran escala basados en fibra larga de CNTs alineados. ABSTRACT The assembly of carbon nanotubes into a macroscopic fibre material where they are preferentially aligned parallel to each other and to the fibre axis has resulted in a new class of high-performance fibres, which efficiently exploits the axial properties of the building blocks and has numerous applications. Long, continuous CNT fibres were produced in IMDEA Materials Institute by direct fibre spinning from a chemical vapour deposition reaction. These fibres have a complex hierarchical structure covering multiple length scales. One objective of this thesis is to reveal this structure by means of state-of-the-art techniques such as synchrotron X-ray diffraction, and to build a model to link the fibre structural elements. Texture and gas absorption measurements, using electron microscopy, wide angle and small angle X-ray scattering (WAXS/SAXS), and pore size distribution analysis by Barrett-Joyner-Halenda (BJH), indicate that the material has a mesoporous structure with a wide pore size distribution arising from the range of fibre bundle separation, and a high surface area _170m2/g. Fractal dimension values of 2.4_2.5 obtained from the SAXS and BJH measurements highlight the network structure of the fibre. Mesoporous and yarn-like structure of CNT fibres make them accessible to the infiltration of foreign molecules (liquid or polymer). This work studies multiscale structural changes when CNT fibres interact with liquids and polymers. The effects of densification on the structure of dry CNT fibres were measured by WAXS/SAXS. The densification treatment brings the fibre bundles closer (pores become smaller), leading to an increase in fibre density. However, structural domains made of the load and charge carrying nanotubes are not affected; consequently, it has no substantial effect on mechanical and electrical properties. SAXS measurements on the CNT fibres before and after liquid infiltration imply that most liquids are able to fill the internal pores but not to intercalate between nanotubes. Successful infiltration of low molecular weight polymer chains tends to expand the fibre bundles and increases the pore-opening angle. SAXS results indicate that the inner structure of the fibre, in terms of the nanotube layer arrangement and the fibre alignment, are not largely affected when infiltrated with polymers of relatively high molecular weight. The crystallisation of a variety of semicrystalline polymers is accelerated by the presence of aligned fibres of CNTs and results in the growth of a transcrystalline layer perpendicular to the fibre surface. This can be observed directly under polarised optical microscope, and detected by the exothermic peaks during differential scanning calorimetry. The discussion on the driving forces for the enhanced nucleation points out the preferential chain orientation of polymer lamella with the chain axis parallel to the fibre and thus to the nanotubes, which is confirmed by two-dimensional WAXS patterns. A non-epitaxial polymer crystal growth habit at the CNT-polymer interface is proposed, which is independent of lattice matching between the polymer and nanotubes. These findings contribute to the discussion on polymer nucleation on CNTs and other nanocarbons, and their implication for the development of large polymer composites based on long and aligned fibres of CNTs.