Análisis de los factores de influencia en la adopción de herramientas colaborativas basadas en software social. Aplicación a entornos empresariales

En las últimas dos décadas, se ha puesto de relieve la importancia de los procesos de adquisición y difusión del conocimiento dentro de las empresas, y por consiguiente el estudio de estos procesos y la implementación de tecnologías que los faciliten ha sido un tema que ha despertado un creciente interés en la comunidad científica. Con el fin de facilitar y optimizar la adquisición y la difusión del conocimiento, las organizaciones jerárquicas han evolucionado hacia una configuración más plana, con estructuras en red que resulten más ágiles, disminuyendo la dependencia de una autoridad centralizada, y constituyendo organizaciones orientadas a trabajar en equipo. Al mismo tiempo, se ha producido un rápido desarrollo de las herramientas de colaboración Web 2.0, tales como blogs y wikis. Estas herramientas de colaboración se caracterizan por una importante componente social, y pueden alcanzar todo su potencial cuando se despliegan en las estructuras organizacionales planas. La Web 2.0 aparece como un concepto enfrentado al conjunto de tecnologías que existían a finales de los 90s basadas en sitios web, y se basa en la participación de los propios usuarios. Empresas del Fortune 500 –HP, IBM, Xerox, Cisco– las adoptan de inmediato, aunque no hay unanimidad sobre su utilidad real ni sobre cómo medirla. Esto se debe en parte a que no se entienden bien los factores que llevan a los empleados a adoptarlas, lo que ha llevado a fracasos en la implantación debido a la existencia de algunas barreras. Dada esta situación, y ante las ventajas teóricas que tienen estas herramientas de colaboración Web 2.0 para las empresas, los directivos de éstas y la comunidad científica muestran un interés creciente en conocer la respuesta a la pregunta: ¿cuáles son los factores que contribuyen a que los empleados de las empresas adopten estas herramientas Web 2.0 para colaborar? La respuesta a esta pregunta es compleja ya que se trata de herramientas relativamente nuevas en el contexto empresarial mediante las cuales se puede llevar a cabo la gestión del conocimiento en lugar del manejo de la información. El planteamiento que se ha llevado a cabo en este trabajo para dar respuesta a esta pregunta es la aplicación de los modelos de adopción tecnológica, que se basan en las percepciones de los individuos sobre diferentes aspectos relacionados con el uso de la tecnología. Bajo este enfoque, este trabajo tiene como objetivo principal el estudio de los factores que influyen en la adopción de blogs y wikis en empresas, mediante un modelo predictivo, teórico y unificado, de adopción tecnológica, con un planteamiento holístico a partir de la literatura de los modelos de adopción tecnológica y de las particularidades que presentan las herramientas bajo estudio y en el contexto especifico. Este modelo teórico permitirá determinar aquellos factores que predicen la intención de uso de las herramientas y el uso real de las mismas. El trabajo de investigación científica se estructura en cinco partes: introducción al tema de investigación, desarrollo del marco teórico, diseño del trabajo de investigación, análisis empírico, y elaboración de conclusiones. Desde el punto de vista de la estructura de la memoria de la tesis, las cinco partes mencionadas se desarrollan de forma secuencial a lo largo de siete capítulos, correspondiendo la primera parte al capítulo 1, la segunda a los capítulos 2 y 3, la tercera parte a los capítulos 4 y 5, la cuarta parte al capítulo 6, y la quinta y última parte al capítulo 7. El contenido del capítulo 1 se centra en el planteamiento del problema de investigación así como en los objetivos, principal y secundarios, que se pretenden cumplir a lo largo del trabajo. Así mismo, se expondrá el concepto de colaboración y su encaje con las herramientas colaborativas Web 2.0 que se plantean en la investigación y una introducción a los modelos de adopción tecnológica. A continuación se expone la justificación de la investigación, los objetivos de la misma y el plan de trabajo para su elaboración. Una vez introducido el tema de investigación, en el capítulo 2 se lleva a cabo una revisión de la evolución de los principales modelos de adopción tecnológica existentes (IDT, TRA, SCT, TPB, DTPB, C-TAM-TPB, UTAUT, UTAUT2), dando cuenta de sus fundamentos y factores empleados. Sobre la base de los modelos de adopción tecnológica expuestos en el capítulo 2, en el capítulo 3 se estudian los factores que se han expuesto en el capítulo 2 pero adaptados al contexto de las herramientas colaborativas Web 2.0. Con el fin de facilitar la comprensión del modelo final, los factores se agrupan en cuatro tipos: tecnológicos, de control, socio-normativos y otros específicos de las herramientas colaborativas. En el capítulo 4 se lleva a cabo la relación de los factores que son más apropiados para estudiar la adopción de las herramientas colaborativas y se define un modelo que especifica las relaciones entre los diferentes factores. Estas relaciones finalmente se convertirán en hipótesis de trabajo, y que habrá que contrastar mediante el estudio empírico. A lo largo del capítulo 5 se especifican las características del trabajo empírico que se lleva a cabo para contrastar las hipótesis que se habían enunciado en el capítulo 4. La naturaleza de la investigación es de carácter social, de tipo exploratorio, y se basa en un estudio empírico cuantitativo cuyo análisis se llevará a cabo mediante técnicas de análisis multivariante. En este capítulo se describe la construcción de las escalas del instrumento de medida, la metodología de recogida de datos, y posteriormente se presenta un análisis detallado de la población muestral, así como la comprobación de la existencia o no del sesgo atribuible al método de medida, lo que se denomina sesgo de método común (en inglés, Common Method Bias). El contenido del capítulo 6 corresponde al análisis de resultados, aunque previamente se expone la técnica estadística empleada, PLS-SEM, como herramienta de análisis multivariante con capacidad de análisis predictivo, así como la metodología empleada para validar el modelo de medida y el modelo estructural, los requisitos que debe cumplir la muestra, y los umbrales de los parámetros considerados. En la segunda parte del capítulo 6 se lleva a cabo el análisis empírico de los datos correspondientes a las dos muestras, una para blogs y otra para wikis, con el fin de validar las hipótesis de investigación planteadas en el capítulo 4. Finalmente, en el capítulo 7 se revisa el grado de cumplimiento de los objetivos planteados en el capítulo 1 y se presentan las contribuciones teóricas, metodológicas y prácticas derivadas del trabajo realizado. A continuación se exponen las conclusiones generales y detalladas por cada grupo de factores, así como las recomendaciones prácticas que se pueden extraer para orientar la implantación de estas herramientas en situaciones reales. Como parte final del capítulo se incluyen las limitaciones del estudio y se sugiere una serie de posibles líneas de trabajo futuras de interés, junto con los resultados de investigación parciales que se han obtenido durante el tiempo que ha durado la investigación. ABSTRACT In the last two decades, the relevance of knowledge acquisition and dissemination processes has been highlighted and consequently, the study of these processes and the implementation of the technologies that make them possible has generated growing interest in the scientific community. In order to ease and optimize knowledge acquisition and dissemination, hierarchical organizations have evolved to a more horizontal configuration with more agile net structures, decreasing the dependence of a centralized authority, and building team-working oriented organizations. At the same time, Web 2.0 collaboration tools such as blogs and wikis have quickly developed. These collaboration tools are characterized by a strong social component and can reach their full potential when they are deployed in horizontal organization structures. Web 2.0, based on user participation, arises as a concept to challenge the existing technologies of the 90’s which were based on websites. Fortune 500 companies – HP, IBM, Xerox, Cisco- adopted the concept immediately even though there was no unanimity about its real usefulness or how it could be measured. This is partly due to the fact that the factors that make the drivers for employees to adopt these tools are not properly understood, consequently leading to implementation failure due to the existence of certain barriers. Given this situation, and faced with theoretical advantages that these Web 2.0 collaboration tools seem to have for companies, managers and the scientific community are showing an increasing interest in answering the following question: Which factors contribute to the decision of the employees of a company to adopt the Web 2.0 tools for collaborative purposes? The answer is complex since these tools are relatively new in business environments. These tools allow us to move from an information Management approach to Knowledge Management. In order to answer this question, the chosen approach involves the application of technology adoption models, all of them based on the individual’s perception of the different aspects related to technology usage. From this perspective, this thesis’ main objective is to study the factors influencing the adoption of blogs and wikis in a company. This is done by using a unified and theoretical predictive model of technological adoption with a holistic approach that is based on literature of technological adoption models and the particularities that these tools presented under study and in a specific context. This theoretical model will allow us to determine the factors that predict the intended use of these tools and their real usage. The scientific research is structured in five parts: Introduction to the research subject, development of the theoretical framework, research work design, empirical analysis and drawing the final conclusions. This thesis develops the five aforementioned parts sequentially thorough seven chapters; part one (chapter one), part two (chapters two and three), part three (chapters four and five), parte four (chapters six) and finally part five (chapter seven). The first chapter is focused on the research problem statement and the objectives of the thesis, intended to be reached during the project. Likewise, the concept of collaboration and its link with the Web 2.0 collaborative tools is discussed as well as an introduction to the technology adoption models. Finally we explain the planning to carry out the research and get the proposed results. After introducing the research topic, the second chapter carries out a review of the evolution of the main existing technology adoption models (IDT, TRA, SCT, TPB, DTPB, C-TAM-TPB, UTAUT, UTAUT2), highlighting its foundations and factors used. Based on technology adoption models set out in chapter 2, the third chapter deals with the factors which have been discussed previously in chapter 2, but adapted to the context of Web 2.0 collaborative tools under study, blogs and wikis. In order to better understand the final model, the factors are grouped into four types: technological factors, control factors, social-normative factors and other specific factors related to the collaborative tools. The first part of chapter 4 covers the analysis of the factors which are more relevant to study the adoption of collaborative tools, and the second part proceeds with the theoretical model which specifies the relationship between the different factors taken into consideration. These relationships will become specific hypotheses that will be tested by the empirical study. Throughout chapter 5 we cover the characteristics of the empirical study used to test the research hypotheses which were set out in chapter 4. The nature of research is social, exploratory, and it is based on a quantitative empirical study whose analysis is carried out using multivariate analysis techniques. The second part of this chapter includes the description of the scales of the measuring instrument; the methodology for data gathering, the detailed analysis of the sample, and finally the existence of bias attributable to the measurement method, the "Bias Common Method" is checked. The first part of chapter 6 corresponds to the analysis of results. The statistical technique employed (PLS-SEM) is previously explained as a tool of multivariate analysis, capable of carrying out predictive analysis, and as the appropriate methodology used to validate the model in a two-stages analysis, the measurement model and the structural model. Futhermore, it is necessary to check the requirements to be met by the sample and the thresholds of the parameters taken into account. In the second part of chapter 6 an empirical analysis of the data is performed for the two samples, one for blogs and the other for wikis, in order to validate the research hypothesis proposed in chapter 4. Finally, in chapter 7 the fulfillment level of the objectives raised in chapter 1 is reviewed and the theoretical, methodological and practical conclusions derived from the results of the study are presented. Next, we cover the general conclusions, detailing for each group of factors including practical recommendations that can be drawn to guide implementation of these tools in real situations in companies. As a final part of the chapter the limitations of the study are included and a number of potential future researches suggested, along with research partial results which have been obtained thorough the research.

Marco de trabajo para adaptar las metodologías ágiles e implantarlas a nivel organizacional

Contexto: La adopción y adaptación de las metodologías ágiles ha sido objeto de estudio en la comunidad y diversas aproximaciones han sido propuestas como solución al problema. La mayoría de las organizaciones comienzan introduciendo prácticas ágiles de manera progresiva, las cuales, junto a las buenas prácticas ya existentes, conforman una nueva metodología ágil adaptada. El problema más importante con el que se enfrentan las organizaciones al adaptar una metodología ágil, son las necesidades específicas del contexto de cada proyecto, porque a pesar de haber definido la adaptación de la metodología en base a las buenas prácticas y procesos existentes en la organización, las condiciones particulares del proyecto y del equipo que lo va a desarrollar, exigen adaptaciones específicas. Otro aspecto importante a resolver es el poder implantar esta adopción y adaptación en toda la organización. Las metodologías ágiles no incluyen actividades que asistan a las organizaciones a solucionar este problema, porque su esfuerzo lo centran en el equipo y el proyecto. Objetivo: El objetivo principal de este trabajo de investigación consiste en “definir un marco de trabajo de adaptación de metodologías ágiles orientado a contextos que permita su implantación en toda la organización a través de ciclos de mejora basados en la reutilización de experiencias adquiridas”. Este marco de trabajo permitirá organizar, gestionar y validar la adaptación de las metodologías ágiles, desplegando en toda la organización las experiencias adquiridas, incorporando pequeñas mejoras en el proceso, y facilitando su reutilización. Todo esto, con el apoyo de la alta dirección. Método: Este trabajo se inició con una investigación exploratoria acompañada de una revisión sistemática para conocer el estado del arte del objeto de estudio, detectando las principales carencias y necesidades de resolución, a partir de las cuales, se delimitó el alcance del problema. Posteriormente, se definieron las hipótesis de investigación y se planteó una solución al problema a través de la definición del marco de trabajo, cuyos resultados fueron evaluados y validados a través de la realización de un caso de estudio. Finalmente, se obtuvieron las conclusiones y se establecieron las líneas futuras de investigación. Resolución: El marco de trabajo presenta una alternativa de adaptación de las metodologías ágiles orientada a contextos, y facilita su implantación en toda la organización. El marco de trabajo idéntica los contextos en los que se desarrollan los proyectos y analiza la causa de los problemas que afectan a la consecución de los objetivos de negocio en cada contexto. Posteriormente, identifica las acciones de adaptación requeridas para reducir o eliminar estas causas y las incorpora en la definición de la metodología ágil, creando de esta manera, una metodología adaptada para cada contexto manteniendo un nivel de agilidad aceptable. Cuando se inicia un nuevo proyecto, se identifica su contexto y se aplica la metodología ágil adaptada definida para dicho contexto. Al final de cada iteración, se analizan las medidas obtenidas y se las compara con la media aplicando una técnica para la evaluación de la consecución de los objetivos. En base a esta comparativa, y a la experiencia adquirida por el equipo, se realizan ajustes en las acciones de adaptación para intentar conseguir una mejora en la siguiente iteración. Una vez finalizado el proyecto, se conoce el impacto de los resultados conseguidos y se puede determinar si se ha alcanzado una mejora en el contexto del proyecto. De ser así, la metodología adaptada es almacenada en un repositorio de experiencias para poder ser reutilizada por otros equipos de desarrollo de la organización. Resultados: El trabajo de investigación fue evaluado y validado satisfactoriamente a través de su experimentación en un caso de estudio, aprobando las hipótesis establecidas. Los aportes y principales resultados de esta investigación son: Definición de un marco de trabajo integral de adaptación de metodologías ágiles, con capacidad de facilitar su implantación en toda la organización. Procedimiento para identificar contextos o escenarios de adaptación. Procedimiento para definir unidades de adaptación a partir de los inhibidores de los objetivos de negocio de la organización. Técnica para analizar la consecución de objetivos en propuestas de mejora de procesos. Conclusiones: Son tres las ventajas principales que han quedado evidenciadas durante la realización del trabajo de investigación: El marco de trabajo proporciona un mecanismo capaz de optimizar el rendimiento de la metodología ágil adaptada al orientar el proceso a las necesidades específicas del contexto del proyecto. El marco de trabajo permite conservar el conocimiento empírico adquirido por el equipo de desarrollo al registrarlo como experiencia adquirida para la organización. El marco de trabajo optimiza y reduce los tiempos del proceso de implantación de la metodología ágil adaptada en otros equipos de la organización. ABSTRACT Context: The adoption and tailoring of agile methods has been studied in the community and various approaches have been proposed as a solution. Most organizations start introducing agile practices gradually, which ones, together with existing good practices, make a new agile method tailored. When an organization starts to adapt an agile method, the context-specific needs of each project are the main trouble, because even though the agile method tailored has been defined based on best practices and processes in the organization, the specific conditions of the project and its team, require specific adaptations. Another important aspect to be solved is to implement this adoption and adaptation throughout all the organization. Agile methods do not include specific activities for helping organizations to solve this problem, because their effort is focused on the team and the project. Objective: The main objective of this research is to “define a tailoring framework for agile methods oriented to contexts that allows its deployment throughout all the organization using improvement cycles based on the reuse of lessons learned”. This framework will allow organize, manage and validate the tailoring of agile methods, adding small improvements in the process, and facilitating reuse. All this, with the support of senior management. Method: This work began with an exploratory investigation accompanied by a systematic review to determine the state of the art about the object of study, after major gaps and needs resolution were identified, and the scope of the problem was delimited. Subsequently, the research hypotheses were defined and the framework was developed for solving the research problem. The results were evaluated and validated through a case study. Finally, conclusions were drawn and future research were established. Resolution The framework presents an alternative for tailoring agile methodologies and facilitates its implementation throughout all the organization. The framework identifies the contexts or scenarios in which software development projects are developed and analyses the causes of the problems affecting the achievement of business goals in each context. Then the adaptation actions required to reduce or eliminate these causes are defined and incorporated into the definition of agile method. Thus, a method tailored for each context is created. When a new project is started, the context in which it will be developed is identified and the tailored agile method to that context is applied. At the end of each iteration of the project, the measurements obtained are analysed and compared with the historical average of context to analyse the improvement in business goals. Based on this comparison, and the experience gained by the project team, adjustments are made in adaptation actions to try to achieve an improvement in the next iteration. Once the project is completed, the impact of the achieved results are known and it can determine if it has reached an improvement in the context of the project. If so, the tailored agile method is stored in a repository of experiences to be reused by other development teams in the organization. Results The goal of this research was successfully evaluated and validated through experimentation in a case study, so the research hypotheses were approved. The contributions and main results of this research are: A framework for tailoring agile methods, that allows its deployment throughout all the organization. A procedure for identifying adaptation scenarios or contexts. A procedure for defining adaptation units from inhibitors of the business goals of the organization. A technique for analysing the achievement of goals in process improvement proposals. Conclusions: There are three main advantages that have been highlighted during the research: The framework provides a mechanism to optimize the performance of agile methods because it guides the process based on the specific needs of the project context. The framework preserves the empirical knowledge acquired by the development team because it registers this empirical knowledge as experience for the organization. The framework streamlines and shortens the process of deploying the tailored agile method to other teams in your organization.

A Novel Approach to Context-Aware Content-Based Middleware

La computación ubicua está extendiendo su aplicación desde entornos específicos hacia el uso cotidiano; el Internet de las cosas (IoT, en inglés) es el ejemplo más brillante de su aplicación y de la complejidad intrínseca que tiene, en comparación con el clásico desarrollo de aplicaciones. La principal característica que diferencia la computación ubicua de los otros tipos está en como se emplea la información de contexto. Las aplicaciones clásicas no usan en absoluto la información de contexto o usan sólo una pequeña parte de ella, integrándola de una forma ad hoc con una implementación específica para la aplicación. La motivación de este tratamiento particular se tiene que buscar en la dificultad de compartir el contexto con otras aplicaciones. En realidad lo que es información de contexto depende del tipo de aplicación: por poner un ejemplo, para un editor de imágenes, la imagen es la información y sus metadatos, tales como la hora de grabación o los ajustes de la cámara, son el contexto, mientras que para el sistema de ficheros la imagen junto con los ajustes de cámara son la información, y el contexto es representado por los metadatos externos al fichero como la fecha de modificación o la de último acceso. Esto significa que es difícil compartir la información de contexto, y la presencia de un middleware de comunicación que soporte el contexto de forma explícita simplifica el desarrollo de aplicaciones para computación ubicua. Al mismo tiempo el uso del contexto no tiene que ser obligatorio, porque si no se perdería la compatibilidad con las aplicaciones que no lo usan, convirtiendo así dicho middleware en un middleware de contexto. SilboPS, que es nuestra implementación de un sistema publicador/subscriptor basado en contenido e inspirado en SIENA [11, 9], resuelve dicho problema extendiendo el paradigma con dos elementos: el Contexto y la Función de Contexto. El contexto representa la información contextual propiamente dicha del mensaje por enviar o aquella requerida por el subscriptor para recibir notificaciones, mientras la función de contexto se evalúa usando el contexto del publicador y del subscriptor. Esto permite desacoplar la lógica de gestión del contexto de aquella de la función de contexto, incrementando de esta forma la flexibilidad de la comunicación entre varias aplicaciones. De hecho, al utilizar por defecto un contexto vacío, las aplicaciones clásicas y las que manejan el contexto pueden usar el mismo SilboPS, resolviendo de esta forma la incompatibilidad entre las dos categorías. En cualquier caso la posible incompatibilidad semántica sigue existiendo ya que depende de la interpretación que cada aplicación hace de los datos y no puede ser solucionada por una tercera parte agnóstica. El entorno IoT conlleva retos no sólo de contexto, sino también de escalabilidad. La cantidad de sensores, el volumen de datos que producen y la cantidad de aplicaciones que podrían estar interesadas en manipular esos datos está en continuo aumento. Hoy en día la respuesta a esa necesidad es la computación en la nube, pero requiere que las aplicaciones sean no sólo capaces de escalar, sino de hacerlo de forma elástica [22]. Desgraciadamente no hay ninguna primitiva de sistema distribuido de slicing que soporte un particionamiento del estado interno [33] junto con un cambio en caliente, además de que los sistemas cloud actuales como OpenStack u OpenNebula no ofrecen directamente una monitorización elástica. Esto implica que hay un problema bilateral: cómo puede una aplicación escalar de forma elástica y cómo monitorizar esa aplicación para saber cuándo escalarla horizontalmente. E-SilboPS es la versión elástica de SilboPS y se adapta perfectamente como solución para el problema de monitorización, gracias al paradigma publicador/subscriptor basado en contenido y, a diferencia de otras soluciones [5], permite escalar eficientemente, para cumplir con la carga de trabajo sin sobre-provisionar o sub-provisionar recursos. Además está basado en un algoritmo recientemente diseñado que muestra como añadir elasticidad a una aplicación con distintas restricciones sobre el estado: sin estado, estado aislado con coordinación externa y estado compartido con coordinación general. Su evaluación enseña como se pueden conseguir notables speedups, siendo el nivel de red el principal factor limitante: de hecho la eficiencia calculada (ver Figura 5.8) demuestra cómo se comporta cada configuración en comparación con las adyacentes. Esto permite conocer la tendencia actual de todo el sistema, para saber si la siguiente configuración compensará el coste que tiene con la ganancia que lleva en el throughput de notificaciones. Se tiene que prestar especial atención en la evaluación de los despliegues con igual coste, para ver cuál es la mejor solución en relación a una carga de trabajo dada. Como último análisis se ha estimado el overhead introducido por las distintas configuraciones a fin de identificar el principal factor limitante del throughput. Esto ayuda a determinar la parte secuencial y el overhead de base [26] en un despliegue óptimo en comparación con uno subóptimo. Efectivamente, según el tipo de carga de trabajo, la estimación puede ser tan baja como el 10 % para un óptimo local o tan alta como el 60 %: esto ocurre cuando se despliega una configuración sobredimensionada para la carga de trabajo. Esta estimación de la métrica de Karp-Flatt es importante para el sistema de gestión porque le permite conocer en que dirección (ampliar o reducir) es necesario cambiar el despliegue para mejorar sus prestaciones, en lugar que usar simplemente una política de ampliación. ABSTRACT The application of pervasive computing is extending from field-specific to everyday use. The Internet of Things (IoT) is the shiniest example of its application and of its intrinsic complexity compared with classical application development. The main characteristic that differentiates pervasive from other forms of computing lies in the use of contextual information. Some classical applications do not use any contextual information whatsoever. Others, on the other hand, use only part of the contextual information, which is integrated in an ad hoc fashion using an application-specific implementation. This information is handled in a one-off manner because of the difficulty of sharing context across applications. As a matter of fact, the application type determines what the contextual information is. For instance, for an imaging editor, the image is the information and its meta-data, like the time of the shot or camera settings, are the context, whereas, for a file-system application, the image, including its camera settings, is the information and the meta-data external to the file, like the modification date or the last accessed timestamps, constitute the context. This means that contextual information is hard to share. A communication middleware that supports context decidedly eases application development in pervasive computing. However, the use of context should not be mandatory; otherwise, the communication middleware would be reduced to a context middleware and no longer be compatible with non-context-aware applications. SilboPS, our implementation of content-based publish/subscribe inspired by SIENA [11, 9], solves this problem by adding two new elements to the paradigm: the context and the context function. Context represents the actual contextual information specific to the message to be sent or that needs to be notified to the subscriber, whereas the context function is evaluated using the publisher’s context and the subscriber’s context to decide whether the current message and context are useful for the subscriber. In this manner, context logic management is decoupled from context management, increasing the flexibility of communication and usage across different applications. Since the default context is empty, context-aware and classical applications can use the same SilboPS, resolving the syntactic mismatch that there is between the two categories. In any case, the possible semantic mismatch is still present because it depends on how each application interprets the data, and it cannot be resolved by an agnostic third party. The IoT environment introduces not only context but scaling challenges too. The number of sensors, the volume of the data that they produce and the number of applications that could be interested in harvesting such data are growing all the time. Today’s response to the above need is cloud computing. However, cloud computing applications need to be able to scale elastically [22]. Unfortunately there is no slicing, as distributed system primitives that support internal state partitioning [33] and hot swapping and current cloud systems like OpenStack or OpenNebula do not provide elastic monitoring out of the box. This means there is a two-sided problem: 1) how to scale an application elastically and 2) how to monitor the application and know when it should scale in or out. E-SilboPS is the elastic version of SilboPS. I t is the solution for the monitoring problem thanks to its content-based publish/subscribe nature and, unlike other solutions [5], it scales efficiently so as to meet workload demand without overprovisioning or underprovisioning. Additionally, it is based on a newly designed algorithm that shows how to add elasticity in an application with different state constraints: stateless, isolated stateful with external coordination and shared stateful with general coordination. Its evaluation shows that it is able to achieve remarkable speedups where the network layer is the main limiting factor: the calculated efficiency (see Figure 5.8) shows how each configuration performs with respect to adjacent configurations. This provides insight into the actual trending of the whole system in order to predict if the next configuration would offset its cost against the resulting gain in notification throughput. Particular attention has been paid to the evaluation of same-cost deployments in order to find out which one is the best for the given workload demand. Finally, the overhead introduced by the different configurations has been estimated to identify the primary limiting factor for throughput. This helps to determine the intrinsic sequential part and base overhead [26] of an optimal versus a suboptimal deployment. Depending on the type of workload, this can be as low as 10% in a local optimum or as high as 60% when an overprovisioned configuration is deployed for a given workload demand. This Karp-Flatt metric estimation is important for system management because it indicates the direction (scale in or out) in which the deployment has to be changed in order to improve its performance instead of simply using a scale-out policy.

UMA VISÃO BASEADA EM RECURSOS COM DIRECIONAMENTO ESTRATÉGICO: UMA PROPOSTA ÀS INSTITUIÇÕES DE SAÚDE HOSPITALARES PÚBLICAS

Este trabalho investiga a utilização da Visão Baseada em Recursos, tendo por objetivo propor um modelo de gestão de pessoas que atenda a exigibilidade da qualidade de prestação de serviços à saúde. São observadas as relações de trabalho nesses serviços nas diversas modalidades, a sistematização do conhecimento sobre os elementos que figuram na gestão de pessoas e a verificação da necessidade de Gestão Operacional e Estratégica de Pessoas para trabalhadores das Instituições de Saúde Hospitalares Públicas. Trata-se de pesquisa de natureza empírico-exploratória, apoiada em múltiplos casos de hospitais públicos, entrevistando e registrando fatos observados nos locais pesquisados, aplicando-se o Protocolo de Observações. Para atingir o objetivo principal, são utilizados os fundamentos das obras de Marras (2001; 2003 e 2005): Relações Trabalhistas no Brasil: administração e estratégia; Administração de Recursos Humanos: do operacional ao estratégico; e Gestão de Pessoas em Empresas Inovadoras, respectivamente. Além das observações participantes, utilizaram-se entrevistas e questionários com os usuários e profissionais dos hospitais, com instrumentos adaptados para o contexto da instituição e dado tratamento estatístico para análise dos resultados, que se apresentam em tabelas para melhor visualização dos dados e análise. A Gestão de Pessoas nas ISHP permanecem no modelo tradicional e longe de qualquer movimento que possa torná-la estratégica. O nível de satisfação dos pacientes para com os profissionais de saúde é ótimo, mas quanto aos recursos e infra-estrutura, é baixo. Os profissionais de saúde na quase sua totalidade trabalham por vocação, espírito de humanização e por acharem gratificante, embora o nível de insatisfação com a remuneração recebida seja elevado.(AU)

UMA VISÃO BASEADA EM RECURSOS COM DIRECIONAMENTO ESTRATÉGICO: UMA PROPOSTA ÀS INSTITUIÇÕES DE SAÚDE HOSPITALARES PÚBLICAS

Este trabalho investiga a utilização da Visão Baseada em Recursos, tendo por objetivo propor um modelo de gestão de pessoas que atenda a exigibilidade da qualidade de prestação de serviços à saúde. São observadas as relações de trabalho nesses serviços nas diversas modalidades, a sistematização do conhecimento sobre os elementos que figuram na gestão de pessoas e a verificação da necessidade de Gestão Operacional e Estratégica de Pessoas para trabalhadores das Instituições de Saúde Hospitalares Públicas. Trata-se de pesquisa de natureza empírico-exploratória, apoiada em múltiplos casos de hospitais públicos, entrevistando e registrando fatos observados nos locais pesquisados, aplicando-se o Protocolo de Observações. Para atingir o objetivo principal, são utilizados os fundamentos das obras de Marras (2001; 2003 e 2005): Relações Trabalhistas no Brasil: administração e estratégia; Administração de Recursos Humanos: do operacional ao estratégico; e Gestão de Pessoas em Empresas Inovadoras, respectivamente. Além das observações participantes, utilizaram-se entrevistas e questionários com os usuários e profissionais dos hospitais, com instrumentos adaptados para o contexto da instituição e dado tratamento estatístico para análise dos resultados, que se apresentam em tabelas para melhor visualização dos dados e análise. A Gestão de Pessoas nas ISHP permanecem no modelo tradicional e longe de qualquer movimento que possa torná-la estratégica. O nível de satisfação dos pacientes para com os profissionais de saúde é ótimo, mas quanto aos recursos e infra-estrutura, é baixo. Os profissionais de saúde na quase sua totalidade trabalham por vocação, espírito de humanização e por acharem gratificante, embora o nível de insatisfação com a remuneração recebida seja elevado.(AU)

NA PALMA DA MÃO: A difusão de celulares e smartphones e possibilidades para o ensino-aprendizagem no Brasil

A pesquisa considera a difusão de celulares e smartphones e as consequências deste fato em possibilidades para o ensino-aprendizagem. Aparatos de comunicação sempre estiveram ligados ao processo de ensino-aprendizagem. Entretanto, com o desenvolvimento mais intenso, nas últimas décadas, das Tecnologias de Informação e Comunicação (TIC), essa relação vem ganhando novos contornos. Surge a Internet, a evolução das máquinas computacionais e, recentemente, a explosão dos dispositivos móveis, fornecendo novos produtos e serviços convergentes. Nesse contexto, celulares e smartphones tem sido utilizados e recomendados para apoio e complemento do processo de ensino-aprendizagem: a chamada Aprendizagem Móvel. Esse ramo cresce devido à rápida expansão e barateamento dessas tecnologias na sociedade. Para verificar cientificamente essa relação foi realizada uma pesquisa de natureza qualitativa, do tipo exploratória, com dois projetos de Aprendizagem Móvel em andamento no Brasil, o Palma – Programa de Alfabetização na Língua Materna e o Escola Com Celular – ECC. Assim, a partir dos dados provenientes da pesquisa, identificamos alguns aspectos relacionados ao uso de celulares e smartphones para o processo de ensino-aprendizagem que contribuem na compreensão desse campo ainda em construção no Brasil. O uso desses dispositivos como suporte para processos de ensino-aprendizagem nos projetos estudados é delineado pelos aspectos tecnologia, dispositivo, público e contexto e novas tecnologias e Aprendizagem Móvel. O aspecto dispositivo desdobra-se em dimensões como disseminação, multifuncionalidade e acessibilidade que embasam os projetos, ainda favorece características apontadas como importantes para o processo de ensino-aprendizagem na atualidade, como mobilidade e portabilidade. Os projetos pesquisados demonstram potencial e metodologia adequada aos contextos para os quais foram criados e aplicados. Entretanto, a pesquisa indicou que ao mesmo tempo em que celulares e smartphones representam o ápice da convergência tecnológica e são considerados extremamente populares e acessíveis na sociedade contemporânea, com possibilidades concretas como nos projetos estudados, não conseguiram conquistar uma posição sólida como suporte para o ensino-aprendizagem. Tal indicação se deve, de acordo com o corpus, à carência de alguns fatores, como: fomento, as práticas se mostram extremamente dependentes da iniciativa pública ou privada para sua extensão e continuidade; sensibilização para o uso de tecnologias disponíveis, não consideram o aparelho dos próprios alunos e um planejamento que inclua, capacite e incentive o uso desses dispositivos. Além disso, a pesquisa também destaca a necessidade de uma visão crítica do uso e papel da tecnologia nesses processos.

What makes next generation members found their own firm: knowledge, contacts, or money?

To increase our understanding of the formation of students' intentions to found an own firm, research needs to systematically integrate theory of planned behavior, resource-based view, and family business literature. To date, however, an explicit and systematic integration of these perspectives cannot be found. We attempt to close this gap by explicitly investigating founding intentions of students with family business background. More specifically, we examine how the provision of human, social, and financial resources by the family affects students' desirability and feasibility perceptions, and ultimately founding intentions. Our analysis based on a sample of 14'290 students from 26 countries reveals that both desirability and feasibility perceptions mediate the relationships between all three types of resources and founding intentions. Interestingly, the provision of financial resources is negatively related to both desirability and feasibility perceptions. These findings illustrate the research potential of a combination of theory of planned behavior with the resource-based view, especially in the family business context. Our study thus offers valuable contributions to literature on career choices, theory of planned behavior, and family business, as well as to practice.

UMA VISÃO BASEADA EM RECURSOS COM DIRECIONAMENTO ESTRATÉGICO: UMA PROPOSTA ÀS INSTITUIÇÕES DE SAÚDE HOSPITALARES PÚBLICAS

Este trabalho investiga a utilização da Visão Baseada em Recursos, tendo por objetivo propor um modelo de gestão de pessoas que atenda a exigibilidade da qualidade de prestação de serviços à saúde. São observadas as relações de trabalho nesses serviços nas diversas modalidades, a sistematização do conhecimento sobre os elementos que figuram na gestão de pessoas e a verificação da necessidade de Gestão Operacional e Estratégica de Pessoas para trabalhadores das Instituições de Saúde Hospitalares Públicas. Trata-se de pesquisa de natureza empírico-exploratória, apoiada em múltiplos casos de hospitais públicos, entrevistando e registrando fatos observados nos locais pesquisados, aplicando-se o Protocolo de Observações. Para atingir o objetivo principal, são utilizados os fundamentos das obras de Marras (2001; 2003 e 2005): Relações Trabalhistas no Brasil: administração e estratégia; Administração de Recursos Humanos: do operacional ao estratégico; e Gestão de Pessoas em Empresas Inovadoras, respectivamente. Além das observações participantes, utilizaram-se entrevistas e questionários com os usuários e profissionais dos hospitais, com instrumentos adaptados para o contexto da instituição e dado tratamento estatístico para análise dos resultados, que se apresentam em tabelas para melhor visualização dos dados e análise. A Gestão de Pessoas nas ISHP permanecem no modelo tradicional e longe de qualquer movimento que possa torná-la estratégica. O nível de satisfação dos pacientes para com os profissionais de saúde é ótimo, mas quanto aos recursos e infra-estrutura, é baixo. Os profissionais de saúde na quase sua totalidade trabalham por vocação, espírito de humanização e por acharem gratificante, embora o nível de insatisfação com a remuneração recebida seja elevado.(AU)

International human resource management:review and critique

The research agenda for the field of international human resource management (IHRM) is clear. For a better understanding and to benefit substantially, management scholars must study IHRM in context (Jackson, S.E. and Schuler, R.S. 1995. Understanding human resource management in the context of organizations and their environment. Annual Review of Psychology, 46: 237–264; Geringer, J.M., Frayne, C.A. and Milliman, J.F. 2002. In search of 'best practices' in international human resource management: research design and methodology. Human Resource Management, forthcoming). IHRM should be studied within the context of changing economic and business conditions. The dynamics of both the local/regional and international/global business context in which the firm operates should be given serious consideration. Further, it could be beneficial to study IHRM within the context of the industry and the firm's strategy and its other functional areas and operations. In taking these perspectives, one needs to use multiple levels of analysis when studying IHRM: the external social, political, cultural and economic environment; the industry, the firm, the sub-unit, the group, and the individual. Research in contextual isolation is misleading: it fails to advance understanding in any significant way (Adler, N.J. and Ghadar, E. 1990. Strategic human resource management: a global perspective. Human Resource Management in International Comparison. Berlin: de Gruyter; Locke, R. and Thelen, K. 1995. Apples and oranges revisited: contextualized comparisons and the study of comparative labor politics. Politics & Society, 23, 337–367). In this paper, we attempt to review the existing state of academic work in IHRM and illustrate how it incorporates the content and how it might be expanded to do so.

Corporate tournaments and executive compensation: evidence from the UK

This study tests the implications of tournament theory using data on 100 U.K. stock market companies, covering over 500 individual executives, in the late 1990s. Our results provide some evidence consistent with the operation of tournament mechanisms within the U.K. business context. Firstly, we find a convex relationship between executive pay and organizational level and secondly, that the gap between CEO pay and other board executives (i.e., tournament prize) is positively related to the number of participants in the tournament. However, we also show that the variation in executive team pay has little role in determining company performance.

Organizational change and development in India:a case of strategic organizational change and transformation

Purpose – The purpose of this paper is to examine developments in the field of organizational change (OC) with reference to the context of India. It highlights the need to analyze this topic in the present Indian economic environment and discusses the main developments reported in the Indian literature on the same. Design/methodology/approach – Empirical evidence based on a qualitative analysis of a case study undertaken at a public-private partnership transformation at North Delhi Power Limited (NDPL) in India is presented. Findings – The findings focus on trust building and belongingness for the employees, establishing a high-performance orientation, quality improvements, and the resultant transformations at NDPL. The analysis indicates a number of ways by which NDPL sought to improve its efficiency in order to better adapt to the rapidly changing Indian business environment. Practical implications – Based on the findings, the paper identifies key messages for policy makers and change agents regarding how to transform companies in the rapidly changing business contexts of emerging markets such as India. Originality/value – The paper offers an in-depth analysis of OC practices in a large organization in India.

Experiences in using a contingency factor-based validation methodology for spreadsheet DSS

The use of spreadsheets has become routine in all aspects of business with usage growing across a range of functional areas and a continuing trend towards end user spreadsheet development. However, several studies have raised concerns about the accuracy of spreadsheet models in general, and of end user developed applications in particular, raising the risk element for users. High error rates have been discovered, even though the users/developers were confident that their spreadsheets were correct. The lack of an easy to use, context-sensitive validation methodology has been highlighted as a significant contributor to the problems of accuracy. This paper describes experiences in using a practical, contingency factor-based methodology for validation of spreadsheet-based DSS. Because the end user is often both the system developer and a stakeholder, the contingency factor-based validation methodology may need to be used in more than one way. The methodology can also be extended to encompass other DSS.

Supply chain integration:challenges and solutions

Since its introduction by management consultants in the early 1980s, supply chain management (SCM) has been primarily concerned with the integration of processes and activities both within and between organisations. The concept of supply chain integration (SCI) is based on documented evidence that suggests that much of the waste throughout businesses is a consequence of fragmented supply chain configurations. However, there is also evidence to suggest that the achievement of higher levels of intra- and inter-firm integration presents an array of managerial challenges. The need for innovation in all aspects of SCM is widely recognised. Given the pivotal role of the integration paradigm within SCM, any meaningful innovation in this area must focus heavily on this issue. This chapter outlines some of the challenges by exploring the evolving SCM business context. It goes on to relate SCM theory to the widely cited Porter value chain concept. The core of the chapter provides a detailed description of SCI based on a wide variety of literature. It does so with particular reference to the challenges inherent in implementing an integrated business paradigm with a view to identifying a range of possible innovative solutions. The adoption of more integrated supply chain structures raises questions regarding the nature of both internal and external customer/supplier relationships. The effective management of such relationships is, therefore, given particular focus.

The challenges of developing an online tool to measure the quality of the passenger experience in a PanEuropean context

METPEX is a 3 year, FP7 project which aims to develop a PanEuropean tool to measure the quality of the passenger's experience of multimodal transport. Initial work has led to the development of a comprehensive set of variables relating to different passenger groups, forms of transport and journey stages. This paper addresses the main challenges in transforming the variables into usable, accessible computer based tools allowing for the real time collection of information, across multiple journey stages in different EU countries. Non-computer based measurement instruments will be used to gather information from those who may not have or be familiar with mobile technology. Smartphone-based measurement instruments will also be used, hosted in two applications. The mobile applications need to be easy to use, configurable and adaptable according to the context of use. They should also be inherently interesting and rewarding for the participant, whilst allowing for the collection of high quality, valid and reliable data from all journey types and stages (from planning, through to entry into and egress from different transport modes, travel on public and personal vehicles and support of active forms of transport (e.g. cycling and walking). During all phases of the data collection and processing, the privacy of the participant is highly regarded and is ensured. © 2014 Springer International Publishing.

Qualidade dos serviços hoteleiros: percepções dos turistas de negócios de Teresina-PI

Business tourism is one of tourist segments with different market characteristics in relation to others segmentations, such as low seasonality, there is no requirement of natural attractions, it serves as destination projection and it generates profitable larger numbers. Due to the context around business travels, the hotel so many times has a fundamental whole among the elements of the production chain in this segmentation. Business tourism in Teresina is the primary segmentation of the capital, since it represents almost 70% of hotel demand; hence this research has as objective to evaluate through the perceptions of business travelers, the level of quality services of hotels of Teresina. The research is exploratory and descriptive, of functionalist character. This study is characterized by qualitative and quantitative research, supported by a basis of methodological pluralism. For primary data collection was performed applying a suitable research instrument of SERVPERF model (Service Performance). The universe of this study were Teresina's accommodations, restricted to only those that fit in hotel category and it was inside metropolitan area of Teresina. The study subjects were business travelers who were hosted in these hotels. For the analysis, it was considered certain factors: descriptive analysis, factor analysis, correlation matrix analysis of the variables; It was still compiling a graphic of lexicons obtained in the survey about respondent's the notion of quality of vision in the hotel service; Finally, qualitative analysis was based on the theories of marketing, targeting and quality of tourism services applied. The results show that the Teresina hotel service is on a regular average, especially for Reliability and Safety dimensions were highlighted. Whereas, the factor analysis showed the emergence of two factors to explain "Empathy" dimension, one of this is about the organization and the other one is about consumer. And by Lexicometria was possible to observe the importance to the customer of other variables such as: personal aspects, price and location for this tour segmentation.