Switching mode power amplifier for bluetooth applications

Modern fully integrated transceivers architectures, require circuits with low area, low cost, low power, and high efficiency. A key block in modern transceivers is the power amplifier, which is deeply studied in this thesis. First, we study the implementation of a classical Class-A amplifier, describing the basic operation of an RF power amplifier, and analysing the influence of the real models of the reactive components in its operation. Secondly, the Class-E amplifier is deeply studied. The different types of implementations are reviewed and theoretical equations are derived and compared with simulations. There were selected four modes of operation for the Class-E amplifier, in order to perform the implementation of the output stage, and the subsequent comparison of results. This led to the selection of the mode with the best trade-off between efficiency and harmonics distortion, lower power consumption and higher output power. The optimal choice was a parallel circuit containing an inductor with a finite value. To complete the implementation of the PA in switching mode, a driver was implemented. The final block (output stage together with the driver) got 20 % total efficiency (PAE) transmitting 8 dBm output power to a 50 W load with a total harmonic distortion (THD) of 3 % and a total consumption of 28 mW. All implementations are designed using standard 130 nm CMOS technology. The operating frequency is 2.4 GHz and it was considered an 1.2 V DC power supply. The proposed circuit is intended to be used in a Bluetooth transmitter, however, it has a wider range of applications.

Contribution of portuguese vernacular building strategies to indoor thermal comfort and occupants’ perception

Solar passive strategies that have been developed in vernacular architecture from different regions are a response to specific climate effects. These strategies are usually simple, low-tech and have low potential environmental impact. For this reason, several studies highlight them as having potential to reduce the demands of non-renewable energy for buildings operation. In this paper, the climatic contrast between northern and southern parts of mainland Portugal is presented, namely the regions of Beira Alta and Alentejo. Additionally, it discusses the contribution of different climate-responsive strategies developed in vernacular architecture from both regions to assure thermal comfort conditions. In Beira Alta, the use of glazed balconies as a strategy to capture solar gains is usual, while in Alentejo the focus is on passive cooling strategies. To understand the effectiveness of these strategies, thermal performances and comfort conditions of two case studies were evaluated based on the adaptive comfort model. Field tests included measurement of hygrothermal parameters and surveys on occupants’ thermal sensation. From the results, it has been found that the case studies have shown a good thermal performance by passive means alone and that the occupants feel comfortable, except during winter where there is the need to use simple heating systems.

Indoor biological agents: evaluation of primary schools environments

Dissertação de mestrado em Human Engineering

Efeito da dieta e do ciclismo indoor sobre a composição corporal e nível sérico lipídico

FUNDAMENTO: O ciclismo indoor é um exercício aeróbico no qual se utiliza grandes grupamentos musculares dos membros inferiores, carente de impacto osteoarticular e de elevado gasto calórico, o que o torna interessante para se gerar uma estratégia não farmacológica. OBJETIVO: Analisar a composição corporal e o perfil lipídico sérico de mulheres com sobrepeso após doze semanas de dieta hipocalórica e treinamento de ciclismo indoor. MÉTODOS: Foram randomizadas 40 mulheres (23,90 ± 3,10 anos), subdivididas em quatro grupos: controle (C), ciclismo indoor (CI), ciclismo indoor associado a dieta hipocalórica (CD) e dieta hipocalórica (D). As variáveis analisadas foram: estatura e massa corporal, IMC, percentual de gordura, massa magra, triglicerídeos, colesterol e lipoproteinas (HDL,LDL,VLDL). O treinamento de ciclismo indoor consistiu em três sessões semanais de 45 minutos cada e a uma restrição energética de aproximadamente 1.200 kcal. O estudo teve duração de 12 semanas. Utilizou-se a estatística descritiva (média e desvio padrão) e inferencial (test t de Student). O nível de significância adotado foi de p < 0,05. RESULTADOS: Os grupos CI, CD e D reduziram significativamente as médias das variáveis antropométricas após as 12 semanas de intervenção (massa corporal, percentual de gordura e índice de massa corporal), além dos níveis séricos de colesterol total e triglicerídios. Em relação ao HDL colesterol, houve aumento significativo para os grupos CI e CD. CONCLUSÃO: De acordo com os resultados, o ciclismo indoor e a dieta hipocalórica contribuíram no combate ao sobrepeso bem como no controle do nível sérico dos lipídeos.

Wireless communication techniques for indoor positioning and tracking applications

Magdeburg, Univ., Fak. für Elektrotechnik und Informationstechnik, Diss., 2010

Wireless indoor positioning based on TDOA and DOA estimation techniques using IEEE 802.11 standards

Magdeburg, Univ., Fak. für Elektrotechnik und Informationstechnik, Diss., 2015

Descobriment de serveis en xarxes ad-hoc: JADE Bluetooth Discovery Middleware

En aquest projecte s'ha dissenyat i implementat un nou Discovery Middleware per a la plataforma d'agents mòbils JADE. Aquest DM col·laborarà amb el Directory Facilitator per tal d'oferir als agents un servei transparent que els permetrà descobrir serveis en plataformes remotes que siguin accessibles mitjançant xarxes ad-hoc basades en la tecnologia Bluetooth.

Gestor de contraseñas en un dispositivo móvil accesible por Bluetooth

Este proyecto nace de la necesidad de dar más seguridad a nuestros datos cuando navegamos por Internet. Se ha implementado un plug-in para el navegador Firefox de Mozilla, que detecta un formulario de login/password conocido y rellena el campo de la contraseña automáticamente. La contraseña estará en nuestro dispositivo móvil y la comunicación entre el navegador y el dispositivo se hará mediante la tecnología Bluetooth.

Sistema de màrqueting per proximitat usant Bluetooth

La tecnologia Bluetooth és una eina molt potent i cada cop més usada en el dia a dia. La possibilitat de portar-la cap a àmbits empresarials pocs explotats fins al moment pot ser una bona oportunitat de negoci. En aquest projecte, s’ha implementat un sistema d’enviament de publicitat a través de missatges a telèfons mòbils usant Bluetooth, el qual és capaç de gestionar-se de manera autònoma i només cal configurar-lo per una senzilla interfície gràfica accessible per xarxa. L’enviament concurrent ha sigut possible, fent que s’enviïn diversos missatges a la vegada.

Aplicació per la creació de classes interactives de Ciclo Indoor

Es tracta d'un projecte evolutiu que permetrà crear una aplicació que serveixi de suport gràfic per a les classes de Ciclo Indoor i que a més a més permetrà al professor preparar-les en pocs minuts. També tindrà un apartat dedicat a gestionar als usuaris del sistema mitjançant una connexió a una base de dades que també ha sigut dissenyada i desenvolupada en aquest projecte.

Indoor air microbiological evaluation of offices, hospitals, industries, and shopping centers

In this study it was compared the MAS-100 and the Andersen air samplers' performances and a similar trend in both instruments was observed. It was also evaluated the microbial contamination levels in 3060 samples of offices, hospitals, industries, and shopping centers, in the period of 1998 to 2002, in Rio de Janeiro city. Considering each environment, 94.3 to 99.4% of the samples were the allowed limit in Brazil (750 CFU/m³). The industries' results showed more important similarity among fungi and total heterotrophs distributions, with the majority of the results between zero and 100 CFU/m³. The offices' results showed dispersion around 300 CFU/m³. The hospitals' results presented the same trend, with an average of 200 CFU/m³. Shopping centers' environments showed an average of 300 CFU/m³ for fungi, but presented a larger dispersion pattern for the total heterotrophs, with the highest average (1000 CFU/m³). It was also investigated the correlation of the sampling period with the number of airborne microorganisms and with the environmental parameters (temperature and air humidity) through the principal components analysis. All indoor air samples distributions were very similar. The temperature and air humidity had no significant influence on the samples dispersion patterns.

Indoor air quality in a public building following smoking bans

Introduction: Exposure to environmental tobacco smoke (ETS) is a major environmental risk factor. Indoor contaminants come from a variety of sources, which can include inadequate ventilation, volatile organic compounds (VOCs), biological agents, combustion products, and ETS. Because ETS is one of the most frequent causes of IAQ complaints as well as the high mortality of passive smoking, in June 2004 the University of Geneva made the decision to ban smoking inside the so called "Uni-Mail" building, the biggest Swiss University human science building of recent construction, and the ordinance was applied beginning in October 2004. This report presents the finding related to the IAQ of the "Uni-Mail" building before and after smoking bans using nicotine, suspended dust, condensate and PAHs level in air as tracers to perform an assessment of passive tobacco exposure for non-smokers inside the building. Methods: Respirable particles (RSP) A real time aerosol monitor (model DataRAM)was place at sampling post 1, level ground floor. Condensate It consists in extracting any organic matter taken on the glass fibre filters by MeOH, and then measuring the total absorbent of the MeOH extract to the UV wavelength of 447 nm. Nicotine Nicotine was taken by means of cartridges containing of XAD-4 to the fixed flow of 0.5 L/min. The analytical method used for the determination of nicotine is based on gas chromatography with Nitrogen selective detector GC-NPD. Results: Figure 1 shows the box plot density display of 3 parameters before and after smoking bans for all 7 sampling posts: dust, condensate and nicotine in air in μg/m3. Conclusion: Before the smoking ban, the level of the concentrations of respirable particles (RSP) is raised more, average of the day 320 μg/m3, with peaks of more than 1000 μg/m3, compared with the values of the surrounding air between 22 and 30 μg/m3. The nicotine level is definitely more important (average 5.53 μg/m3, field 1.5 to 17.9 μg/m3). Once the smoking bans inside the building were applied, one notes a clear improvement in terms of concentrations of pollutants. For dust, the concentration fell by 3 times (average: 130 μg/m3, range: 40 to 160 μg/m3) and that of nicotine by 10 times (average: 0.53 μg/m3, range: 0 to 1.69 μg/m3) compared to that found before smoking bans. The outdoor air RSP concentration was 22 μg/m3 or 10 times lower. Nicotine seems to be the best tracer for ETS free of interference, independent of location or season.

Major influencing factors of indoor radon concentrations in Switzerland.

PURPOSE: In Switzerland, nationwide large-scale radon surveys have been conducted since the early 1980s to establish the distribution of indoor radon concentrations (IRC). The aim of this work was to study the factors influencing IRC in Switzerland using univariate analyses that take into account biases caused by spatial irregularities of sampling. METHODS: About 212,000 IRC measurements carried out in more than 136,000 dwellings were available for this study. A probability map to assess risk of exceeding an IRC of 300 Bq/m(3) was produced using basic geostatistical techniques. Univariate analyses of IRC for different variables, namely the type of radon detector, various building characteristics such as foundation type, year of construction and building type, as well as the altitude, the average outdoor temperature during measurement and the lithology, were performed comparing 95% confidence intervals among classes of each variable. Furthermore, a map showing the spatial aggregation of the number of measurements was generated for each class of variable in order to assess biases due to spatially irregular sampling. RESULTS: IRC measurements carried out with electret detectors were 35% higher than measurements performed with track detectors. Regarding building characteristics, the IRC of apartments are significantly lower than individual houses. Furthermore, buildings with concrete foundations have the lowest IRC. A significant decrease in IRC was found in buildings constructed after 1900 and again after 1970. Moreover, IRC decreases at higher outdoor temperatures. There is also a tendency to have higher IRC with altitude. Regarding lithology, carbonate rock in the Jura Mountains produces significantly higher IRC, almost by a factor of 2, than carbonate rock in the Alps. Sedimentary rock and sediment produce the lowest IRC while carbonate rock from the Jura Mountains and igneous rock produce the highest IRC. Potential biases due to spatially unbalanced sampling of measurements were identified for several influencing factors. CONCLUSIONS: Significant associations were found between IRC and all variables under study. However, we showed that the spatial distribution of samples strongly affected the relevance of those associations. Therefore, future methods to estimate local radon hazards should take the multidimensionality of the process of IRC into account.