Optical, electrical, and thermochromic properties of polyazothiophene Langmuir-Blodgett films

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Calcium salts deposition in rat connective tissue after the implantation of calcium hydroxide-containing sealers

This study was conducted to observe the rat subcutaneous connective tissue reaction to implanted dentin tubes that were filled with mineral trioxide aggregate, Sealapex, Calciobiotic Root Canal Sealer (CRCS), Sealer 26, and the experimental material, Sealer Plus. The animals were sacrificed after 7 and 30 days, and the specimens were prepared for histological analysis after serial sections with a hard-tissue microtome. The undecalcified sections were examined with polarized light after staining according to the Von Kossa technique for calcium. At the tube openings, there were Von Kossa-positive granules that were birefringent to polarized light. Next to these granulations, there was irregular tissue, like a bridge, that was Von Kossa-positive. The dentin walls of the tubes exhibited a structure highly birefringent to polarized light, usually like a layer, in the tubules. These results were observed with all the studied materials, except the CRCS, which didn't exhibit any kind of mineralized structure. The results suggest that among the materials studied, the CRCS could have the least possibility of encouraging hard tissue deposition.

Reaction of rat connective tissue to implanted dentin tubes filled with a white mineral trioxide aggregate.

The purpose of this paper was to study the reaction of rat subcutaneous connective tissue to the implantation of dentin tubes filled with white mineral trioxide aggregate (MTA), a material that will be marketed. The tubes were implanted into rat subcutaneous tissue and the animals were sacrificed after 7 and 30 days. The undecalcified pieces were prepared for histological analysis with polarized light and von Kossa technique for mineralized tissues. Granulations birefringent to polarized light and an irregular structure like a bridge were observed next to the material; both were von Kossa positive. Also, in the dentin wall tubules a layer of birefringent granulations was observed. The results were similar to those reported for gray MTA, indicating that the mechanisms of action of the white and gray MTA are similar.

Collagen fibers in human prostatic lesions: histochemistry and anisotropies

The present study focuses on establishing patterns of collagen fibers distribution in prostatic nodular hyperplasia and adenocarcinomas, in comparison with the normal tissue. Sections of prostatic transurethral resection were subjected to Gömöri's method for collagen fibers and reticulin and analyzed under ordinary and polarized light microscopy. Controls and hyperplastic regions present collagen fibers with variable thickness that run in different directions, establishing a tridimensional network. These fibers exhibit birefringence and dichroism thus demonstrating their fibrillar integrity. On the other hand, increased variability in collagen fiber distribution and anisotropical properties occur in adenocarcinomas evaluated in accordance with the Gleason's score. In some of their areas, a well-defined collagen network delimitates the base of transformed epithelial cells whereas in other areas the collagen fibers are disorganized and do not establish a boundary between the epithelial structures and the stroma. In these areas, collagen is found in the stroma. It was also observed that adenocarcinoma tumor cells rest on a scaffold of thin and dendritic collagen fibers. Collagen fibers of the prostatic stroma of the adenocarcinomas may show a modification in arrangement and fibrillar compactness. In prostatic nodular hyperplasia, there is no change in collagen molecular integrity, since collagen affinity for silver and collagen birefringence are similar to controls. In adenocarcinoma with high dedifferentiation degree, thin and branched strongly argyrophilic and birefringent collagen fibers are detected in regions of cell proliferation. In the adjacent stroma, hyaline plaques are indicative of matrix degradation or remodellation.

Erbium-activated HfO2-based waveguides for photonics

70SiO2 - 30HfO2 planar waveguides, activated by Er3+ concentration ranging from 0.3 to 1 mol%, were prepared by solgel route, using dip-coating deposition on silica glass substrates. The waveguides showed high densification degree, effective intermingling of the two components of the film, and uniform surface morphology. Propagation losses of about 1 dB/cm were measured at 632.8 nm. When pumped with 987 nm or 514.5 nm continuous-wave laser light, the waveguides showed the 4I 13/2→4I15/2 emission band with a bandwidth of 48 nm. The spectral features were found independent both on erbium content and excitation wavelength. The 4I13/2 level decay curves presented a single exponential profile, with a lifetime between 2.9-5.0 ms, depending on the erbium concentration.

Seleção de espermatozoides para ICSI

The application of assisted reproduction techniques has provided help to many men seeking to father a child, although the current success of these procedures remains suboptimal. Today some protocols allow sperm to be selected according to their ultrastructural morphology or surface molecular characteristics. On the other hand, successful human reproduction relies partly on the inherent integrity of sperm DNA. Therefore, it is now necessary to improve the safety of the sperm selection method. It is urgent to optimize procedures to isolate spermatozoa for ICSI with low risk of DNA damage. In recent years, two technologies have attracted the attention of specialists as methods capable of identifying a spermatozoon with low risk of DNA damage: Ultrastructural morphology sperm selection at high magnification and sperm head birefringence selection. This review analyses these two technologies. © Todos os direitos reservados a SBRA - Sociedade Brasileira de Reprodução Assistida.

Films from resistant starch-pectin dispersions intended for colonic drug delivery

Free films were obtained by the solvent casting method from retrograded starch-pectin dispersions at different polymer proportions and concentrations with and without plasticizer. Film forming dispersions were characterized according to their hardness, birefringence and rheological properties. The polymer dispersions showed a predominantly viscous behavior (G″ > G′) and the absence of plasticizers lead to building of stronger structures, while the occurrence of Maltese crosses in the retrograded dispersions indicates the occurrence of a crystalline organization. Analyses of the films included mechanical properties, thickness, superficial and cross sectional morphology, water vapor permeability, liquid uptake ability, X-ray diffractometry, in vitro dissolution and enzymatic digestion. The high resistant starch content (65.8-96.8%) assured the resistance of materials against enzymatic digestion by pancreatin. Changes in the X-ray diffraction patterns indicated a more organized and crystalline structure of free films in relation to isolated polymers. Increasing of pectin proportion and pH values favored the dissolution and liquid uptake of films. Films prepared with lower polymer concentration presented better barrier function (WVP and mechanical properties). © 2013 Elsevier Ltd. All rights reserved.

Fabricação e caracterização de filmes finos e ultrafinos de coroas de éter com azobenzeno incorporado e estudo da birrefringência fotoinduzida

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Preparação e caracterização de filmes fotossensíveis de TEOS/PMMA obtidos a partir do processo Sol-Gel

Pós-graduação em Física - IGCE

Preparação e caracterização de resina epóxi transparente dopada com nanoestruturas semicondutoras de CdS

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Analise de tensões com ultrassom em tubos soldados por resistência elétrica

Pós-graduação em Engenharia Mecânica - FEG

Estudos de birrefringência fotoinduzida em filmes LB mistos do azopolímero poli (metacrilato de lauroila-co-metacrilato de DR1) com estearato de cádmio

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Vórtices semilocais

Pós-graduação em Física - FEG

Distribuição das tensões geradas ao redor de implantes osseointegrados de diferentes conexões cone morse: análise fotoelástica e pelo método dos elementos finitos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Aspecto histológico do esmalte decíduo e influência do material restaurador após a indução de formação de lesão artificial de cárie por diferentes métodos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)