Sustainability of apparent slip in micro-channel flows

In the present work, we experimentally study the flow of water over textured hydrophobic surfaces in a micro-channel. Shear stress measurements are done along with direct visualization of trapped air pockets on the hydrophobic surface. The trapped air pockets on such surfaces are known to be responsible for apparent slip at these surfaces and hence in significant drag reduction. In typical circumstances, the apparent slip reduces over time as seen, for example, from our shear stress measurements. This implies that the drag reduction will not be sustained. We have performed extensive visualizations of the trapped air pockets while varying flow parameters like the flow rate and the pressure. We present here direct visualizations that show that under some conditions, the air pockets can grow with time. The variation of the air pocket size with time is found to change qualitatively and quantitatively as the flow rate is varied. These measured changes in the air pocket size with time have a direct bearing on the sustainability of apparent slip in micro-channel flows.

Investigation of Magnon Assisted Resistivity in Permalloy Thin Films

Magnon contribution to the resistance of ferromagnetic film like Permalloy is investigated by magnetotransport measurements. We are able to observe and distinguish Anisotropic-Magnetoresistance(AMR)(1) and Magnon Magnetoresistance(MMR)(2) contributions clearly in PLD grown Permalloy films. A linear non-saturating longitudinal MR observed in high field regime for permalloy films could never be explained using AMR but only MMR can account for it.

Studies on thin film based flexible gold electrode arrays for resistivity imaging in electrical impedance tomography

Practical phantoms are essential to assess the electrical impedance tomography (EIT) systems for their validation, calibration and comparison purposes. Metal surface electrodes are generally used in practical phantoms which reduce the SNR of the boundary data due to their design and development errors. Novel flexible and biocompatible gold electrode arrays of high geometric precision are proposed to improve the boundary data quality in EIT. The flexible gold electrode arrays are developed on flexible FR4 sheets using thin film technology and practical gold electrode phantoms are developed with different configurations. Injecting a constant current to the phantom boundary the surface potentials are measured by a LabVIEW based data acquisition system and the resistivity images are reconstructed in EIDORS. Boundary data profile and the resistivity images obtained from the gold electrode phantoms are compared with identical phantoms developed with stainless steel electrodes. Surface profilometry, microscopy and the impedance spectroscopy show that the gold electrode arrays are smooth, geometrically precised and less resistive. Results show that the boundary data accuracy and image quality are improved with gold electrode arrays. Results show that the diametric resistivity plot (DRP), contrast to noise ratio (CNR), percentage of contrast recovery (PCR) and coefficient of contrast (COC) of reconstructed images are improved in gold electrode phantoms. (C) 2013 Elsevier Ltd. All rights reserved.

Projection Error Propagation-based Regularization (PEPR) method for resistivity reconstruction in Electrical Impedance Tomography (EIT)

A novel Projection Error Propagation-based Regularization (PEPR) method is proposed to improve the image quality in Electrical Impedance Tomography (EIT). PEPR method defines the regularization parameter as a function of the projection error developed by difference between experimental measurements and calculated data. The regularization parameter in the reconstruction algorithm gets modified automatically according to the noise level in measured data and ill-posedness of the Hessian matrix. Resistivity imaging of practical phantoms in a Model Based Iterative Image Reconstruction (MoBIIR) algorithm as well as with Electrical Impedance Diffuse Optical Reconstruction Software (EIDORS) with PEPR. The effect of PEPR method is also studied with phantoms with different configurations and with different current injection methods. All the resistivity images reconstructed with PEPR method are compared with the single step regularization (STR) and Modified Levenberg Regularization (LMR) techniques. The results show that, the PEPR technique reduces the projection error and solution error in each iterations both for simulated and experimental data in both the algorithms and improves the reconstructed images with better contrast to noise ratio (CNR), percentage of contrast recovery (PCR), coefficient of contrast (COC) and diametric resistivity profile (DRP). (C) 2013 Elsevier Ltd. All rights reserved.

High pressure studies on the electrical resistivity of Ge-Te-Tl glasses

The variation of electrical resistivity in the system of glasses Ge17Te83-xTlx, with (1 <= x <= 13), has been studied as a function of high pressure for pressures up to 10 GPa. It is found that the normalized electrical resistivity decreases continuously with the increase in pressure and shows a sudden drop at a particular pressure (transition pressure), indicating the presence of a transition from semiconductor to near-metallic at these pressures which are in the range 3.0-5.0 GPa. This transition pressure is seen to decrease with the increase in the percentage content of thallium due to increasing metallicity of the thallium. The transition is reversible under application of pressure and X-ray diffraction of samples recovered after pressurization show that they remain amorphous after undergoing a pressurization decompression cycle.

Variation of Electrical Resistivity with High Pressure in Ge-Te-Sn Glasses: A Composition Dependent Study

The variation of normalized electrical resistivity in the system of glasses Ge15Te85-xSnx with (1 <= x <= 5) has been studied as a function of high pressure for pressures up to 9.5 GPa. It is found that with the increase in pressure, the resistivity decreases initially and shows an abrupt fall at a particular pressure, indicating the phase transition from semiconductor to near metallic at these pressures, which lie in the range 1.5-2.5 GPa, and then continues being metallic up to 9.5 GPa. This transition pressure is seen to decrease with the increase in the percentage content of tin due to increasing metallicity of tin. The semiconductor to near metallic transition is exactly reversible and may have its origin in a reduction of the band gap due to high pressure.

Effect Of High Pressure On The Electrical Resistivity Of Ge-Te In Glasses

The variation in the electrical resistivity of the chalcogenide glasses Ge15Te85-x has been studied as a function of high pressure for pressures up to 8.5GPa. All the samples studied undergo a semi-conductor to metallic transition in a continuous manner at pressures between 1.5-2.5GPa. The transition pressure at which the samples turn metallic increases with increase in percentage of Indium. This increase is a direct consequence of the increase in network rigidity with the addition of Indium. At a constant pressure of 0.5GPa, the normalized resistivity shows some signature of the existence of the intermediate phase. Samples recovered after a pressure cycle remain amorphous suggesting that the semi-conductor to metallic transition arises from a reduction of the band gap due to pressure or the movement of the Fermi level into the conduction or valence band.

Appraisal of groundwater resource in Holocene soil deposits by resistivity, hydrochemical and granulomerial studies in the Gulf of Mannar Coast from Southern India

This article is aimed to delineate groundwater sources in Holocene deposits area in the Gulf of Mannar Coast from Southern India. For this purpose 2-D electrical resistivity tomography (ERT), hydrochemical and granulomerical studies were carried out and integrated to identify hydrogeological structures and portable groundwater resource in shallow depths which in general appears in the coastal tracts. The 2-D ERT was used to determine the two-dimensional subsurface geological formations by multicore cable with Wenner array. Low resistivity of 1-5 Omega m for saline water appeared due to calcite at the depth of about 5 m below the ground level (bgl). Sea water intrusion was observed around the maximum resistivity as 5 Omega m at the 8 m depth, bgl in the calcite environs, but the calcareous sandstone layer shows around 15-64 Omega m at the 6 m depth, bgl. The hydrochemical variation of TDS, HCO3-, Cl-, Na+, K+, Ca2+, and Mg2+ concentrations was observed for the saline and sea water intrusion in the groundwater system. The granulometic analysis shows that the study area was under the sea between 5400 and 3000 year ago. The events of ice melting an unnatural ice-stone rain/hail among 5000-4000 years ago resulted in the inundation of sea over the area and deposits of late Holocene marine transgression formation up to Puthukottai quartzite region for a stretch of around 17 km.

Thickness of the near-interface regions and central bulk ohmic resistivity in lead lanthanum zirconate titanate ferroelectric thin films

Thickness of the near-interface regions (NIR) and central bulk ohmic resistivity in lead lanthanum zirconate titanate ferroelectric thin films were investigated. A method to separate the low-resistive near-interface regions (NIRs) from the high-resistive central bulk region (CBR) in ferroelectric thin films was presented. Results showed that the thickness of the NIRs depended on the electrode materials in use and the CBR resistivity depended on the impurity doping levels.

Some factors affecting the distribution and apparent abundance of yellowfin and skipjack tuna in the Eastern Pacific Ocean

ENGLISH: Since 1951, the Inter-American Tropical Tuna Commission has been investigating the biology, ecology and population dynamics of the yellowfin tuna, Thunnus albacares, and the skipjack tuna, Katsuwonus pelamis, in the Eastern Pacific Ocean. Of particular importance has been the study of the effects of fishing and of fishery-independent factors on the abundance and distribution of these tunas. For yellowfin tuna there is, on the average, an inverse relationship between total fishing effort and apparent abundance (Schaefer, 1957a). For skipjack there is no evidence to suggest that fishing effort has ever been sufficiently intense to affect measurably the abundance (Schaefer, 1961). Rather, it appears that the year-to-year fluctuations in apparent abundance are independent of the activities of the fishing fleets. SPANISH: Desde 1951 la Comisión Interamericana del Atún Tropical se ha dedicado a la investigación de la biología, ecología y la dinámica de las poblaciones del atún aleta amarilla, Thunnus albacares, y del barrilete, Katsuwonus pelamis, en el Océano Pacífico del Este. De importancia especial ha sido el estudio de los efectos de la pesca y de los factores independientes de las pesquerías sobre la abundancia y la distribución de esos atunes. En cuanto al atún aleta amarilla, existe, en promedio, una relación inversa entre el esfuerzo total de pesca y la abundancia aparente (Schaefer, 1957a) . Con respecto al barrilete, no hay evidencia que haga pensar que el esfuerzo de pesca haya sido nunca lo suficientemente intenso como para afectar sensiblemente la abundancia (Schaefer, 1961). Más bien parece que las fluctuaciones de un año a otro en su abundancia aparente, son independientes de las actividades de las flotas pesqueras.

Sea surface temperature and the distribution and apparent abundance of skipjack (Katsuwonus pelamis) in the Eastern Pacific Ocean, 1951-1968

ENGLISH: Isograms of sea surface temperature (OC) have been produced for 1949-1968 for the areas of the eastern Pacific Ocean in which the majority of the skipjack catch is taken. These are in the immediate coastal zone, California (35° N) to Chile (20 0 S), and the Revillagigedo and Galapagos Islands groups. Skipjack occurrence and apparent abundance (as CSDF, i.e., catch per standard days fishing, standardized in purse-seiner units) for 1951-1968 were then superimposed on the surface temperature isograms. Results show that skipjack occur at surface temperatures> 17° C but with the majority between 20°-30° C. Apparent abundance at CSDF > 1 ton/day is normally Iimited to 20°29° C water, except in two areas in certain years; from the Gulf of Tehuantepec to Cape Mala rates of 1-9 tons/day are relatively common at 29°-30° C, and off Chimbote (Peru) occasionally >9 tons/day are recorded down to 18° C. As expected there were no apparent relationships between annual thermal conditions in the coastal zone and skipjack abundance (total catch or indices of abundance) in the same or 2 subsequent years. An Appendix to the report determines the quantitative relationships between surface temperature and skipjack abundance in relatively small areal strata in Baja California waters in 1955 and 1958. Relationships generally appeared significant and opposite in these years when temperatures were respectively anomalously cold and warm. SPANISH: Se han producido isogramas de la temperatura de la superficie del mar (OC) para 1949-1968 correspondientes a las áreas del Océano Pacífico oriental en donde se obtiene la mayor parte de la captura de barrilete. Estas se encuentran ubicadas en la zona costanera inmediata, desde California (35°N) hasta Chile (200S) y en las Islas Revillagigedo y Galápagos. La ocurrencia de barrilete y su abundancia aparente (expresada como CDSP standardizada en unidades de cerqueros) para 1951-1968 fueron luego superpuestas en los isogramas de la temperatura superficial. Los resultados demuestran que el barrilete aparece en temperaturas superficiales de > 17°C pero la mayoría entre los 20°C-30°C. La abundancia aparente de la CDSP > 1 tonelada/día se limita normalmente a aguas de 20°-29°C, excepto en dos áreas en ciertos años; desde el Golfo de Tehuantepec a Cabo Mala las tasas de 1-9 toneladas/día son relativamente comunes en los 29°-30°C, y frente a Chimbote (Perú) se registran ocasionalmente> 9 toneladas/día a una temperatura tan fría como de 18°C. Como era de esperarse no existió una relación aparente entre las condiciones térmicas anuales de la zona costanera y la abundancia del barrilete (captura total o índices de abundancia) en el mismo año o en los 2 años siguientes. Un Apéndice del informe determina la relación cuantitativa entre la temperatura superficial y la abundancia del barrilete en un estrato de áreas relativamente pequeño en las aguas de Baja California en 1955 y 1968. Las relaciones generalmente aparecieron significativas y opuestas en esos años cuando las temperaturas fueron respectivamente anómalamente frías y calientes. (PDF contains 53 pages.)

The influence of some environmental variables on the apparent abundance of skipjack tuna, Katsuwonus pelamis, in the Eastern Pacific Ocean

ENGLISH: The abundance of skipjack larvae in the central and western Pacific approximately doubled for every 1°C increase in sea-surface temperature (SST) from 23°C to a maximum of about 29°C, and then usually decreased with further increases in SST. Skipjack larvae are scarce in the eastern Pacific Ocean (EPO), so most skipjack recruits and adults in this area are believed to have originated in the central and, possibly, the western Pacific. The catch per unit of effort (CPUE), in short tons per day's fishing, and the catch rate, in number of fish per day's fishing, are estimates of apparent abundance in a fishery. The logarithm of the annual CPUE for skipjack for international baitboats in the EPO for the 1934-1960 period was positively correlated with SST in the spawning area in the central Pacific 18 months earlier (r2 0.31), during the July-June period when most of the recruits in each cohort were presumed to have been spawned. Adequate data for other environmental variables were not available for testing with the baitboat data. The other environmental variables available and selected for testing for correlation with estimates of skipjack abundance for purse seiners for the 1961-1984 period and the reasons for their selection are as follows. 1)Wind-mixing index (WMI). The degree of mixing in the upper layers of the ocean is proportional to the cube of the wind speed, called WMI. The degree of mixing in the spawning areas of the central and the western Pacific may affect the concentration of organisms that skipjack larvae feed upon, thereby influencing their survival, and ultimately determining cohort strength and the number of recruits to the eastern Pacific fishery. 2) SST in the fishing areas at the time of fishing (SST). The CPUE for yellowfin tuna has been shown to be inversely related to SST in the fishing areas, and there are indications that skipjack CPUE is lower during EI Nino events when SST is higher than normal. 3) North-south SST gradient across the thermal front off the Gulf of Guayaquil. This is a measure of the degree of upwelling and nutrient enrichment of the upper waters south of the front and ultimately of the production of food for tunas. 4) Speed of the North Equatorial Countercurrent (NECC). Young skipjack may migrate from the central Pacific to the EPO in the eastward flowing NECC; if so, the number of recruits might be affected by variations in the speed of the current. The logarithm of the annual catch rate of skipjack recruits by international purse seiners in the EPO for the 1961-1984 period was positively correlated with SST in the spawning area of the central Pacific 18 months earlier (r2 = 0.21),and inversely correlated with WMI in the spawning area 18 months earlier (r2 0.46). The logarithm of CPUE for purse seiners in the area off the Gulf of Guayaquil was not correlated with SST in the spawning area 18 months earlier, but was inversely correlated with WMI in the spawning area 18 months earlier (r2 = 0.19), and inversely correlated with the north-south SST gradient in the fishing area at the time of fishing (r2 0.32). Neither of these estimates of apparent abundance from purse seiners were correlated with SST in the fishing areas, or with the speed of the NECC at earlier times. SPANISH: La abundancia de larvas de barrilete en el Pacífico central y occidental se multiplicó por dos, aproximadamente, por cada aumento de 1°Cen la temperatura de la superficie del mar (TSM) entre 23°C y un máximo de unos 29°C, y luego generalmente disminuyó con más aumentos en la TSM. Las larvas de barrilete son escasas en el Océano Pacífico oriental (OPO), y por lo tanto se cree que la mayoría de los reclutas y adultos en esta zona surgieron del Pacífico central, y posiblemente también del Pacífico occidental. La captura por unidad de esfuerzo (CPUE), en toneladas cortas por día de pesca, y la tasa de captura, en número de peces por día de pesca, son estimaciones de la abundancia aparente en una pesquería. El logaritmo de la CPUE anual de barrilete lograda por barcos de carnada en el OPO en el período 1934-1960 se correlacionó positivamente con la TSM en la zona de desove en el Pacífico central de 18 meses antes (r2 = 0.31), durante el período de junio-julio en el cual se cree que nació la mayoría de los reclutas en cada cohorte. No se dispuso de datos suficientes sobre otras variables ambientales para comprobarlos con los datos de los barcos de carnada. Las demás variables ambientales disponibles y seleccionadas para someterlas a pruebas de correlación con las estimaciones de la abundancia del barrilete de barcos cerqueros en el período 1961-1984, y las razones por su selección, son las siguientes: 1) Indice de mezcla por el viento (IMV). El grado de mezcla en las capas superiores del océano es proporcional al cubo de la velocidad del viento, llamado IMV. Es posible que el grado de mezcla en las zonas de desove del Pacífico central y occidental afecte la concentración de los organismos que alimentan a las larvas del barrilete, afectando así la supervivencia de éstas, y finalmente determinando el tamaño de las cohortes y el número de reclutas a la pesquería del OPO. 2) TSM en la zona de pesca al realizarse la pesca (TSM). Se ha mostrado que la relación de la CPUE del atún aleta amarilla a la TSM en la zona de pesca es inversa, y existen indicaciones que la CPUE de barrilete es inferior durante eventos del Niño, cuando las TSM son superiores a lo normal. 3) Gradiente norte-sur de las TSM a través del frente térmico frente al Golfo de Guayaquil. Esto es una medida del grado de afloramiento y enriquecimiento nutritivo del nivel superior de las aguas al sur de dicho frente, y finalmente de la producción de alimento para los atunes. 4) La velocidad de la Contracorriente Ecuatorial del Norte (CCEN). Es posible que los bariletes juveniles migren del Pacífico central al Pacífico oriental en la CCEN, que fluye hacia el este; de ser así, es posible que la cantidad de reclutas se vea afectada por variaciones en la velocidad de la corriente. El logaritmo de la tasa anual de captura de reclutas de barrilete por cerqueros de varias banderas en el OPO en el período 1961-1964 estuvo correlacionado de forma positiva con las TSM en la zona de desove del Pacífico central de 18meses antes (r2 0.21),y de forma inversa con el IMV de la zona de desove de 18 meses antes (r2 0.46). El logaritmo de la CPUE de los cerqueros en la zona frente al Golfo de Guayaquil no estuvo correlacionado con las TSM en la zona de desove de 18 meses antes, pero sí estuvo correlacionado de forma inversa con el IMV en la zona de desove de 18 meses antes (r2 0.19),y con el gradiente norte-sur de las TSM en la zona de pesca al realizarse la pesca (r2 0.32). Ninguna de estas estimaciones de abundancia aparente provenientes de barcos cerqueros estuvo correlacionada con las TSM en las zonas de pesca o con la velocidad de la CCEN en épocas anteriores. (PDF contains 140 pages.)