Weathering - Carvel Chair

Carvel Chair selected for inclusion in the DCCoI Weathering Exhibtiion at LDF14

Weathering tests of photocatalytic facade paints containing ZnO and TiO2.

The photocatalytic properties of self-cleaning acrylic paint containing TiO2 and ZnO were studied using Acid Orange 7 as a model compound. Paints were exposed to simulated weathering tests in a QUV panel. The initial photoactivity of the unweathered paints with ZnO was significantly higher. In the case of paints containing P25 the photocatalytic activity increases with weathering time, due to increasing destruction of the polymer resin and consequent exposure of the photocatalyst pigment to the Acid Orange 7 test solution. In contrast, in the case of paints containing ZnO, a decrease in photocatalytic activity is observed after weathering, due to the loss and/or photocorrosion of ZnO particles during the weathering process.

High resolution monitoring of surface morphological change of building limestones in response to simulated salt weathering

A salt weathering simulation using a mix of sodium chloride (5%) and magnesium sulphate (5%) in a salt corrosion cabinet and five granular limestones is described. Progressive surface loss from vertical exposed faces was mapped using a high resolution (sub-millimetre) object scanner (Konica Minolta Vi9i). Patterns of loss are related to surface porosity/permeability measurements obtained using a hand-held gas permeameter. Introduction of this spatial dimension into damage assessment is seen as essential for understanding the initial conditions that allow surface loss to be triggered, and changes in surface characteristics as weathering proceeds which dictate subsequent decay in space and time. Preliminary observations suggest that scanning at this high resolution is particularly valuable in quantifying very subtle trends and distortions that are pre-cursors to material loss, including surface swelling and pore filling.

The effects of lichen cover upon the rate of solutional weathering of limestone

The contribution of lichens to the biomodification of limestone surfaces is an area of conflict within bioweathering studies, with some researchers suggesting a protective effect induced by lichen coverage and others a deteriorative effect induced by the same organisms.Data are reported demonstrating the potential role of endolithic lichen, in particular of Bagliettoa baldensis, in the active protection of Carboniferous limestone surfaces from rainfall-induced solutional weathering. During a 12-month microcatchment exposure period in the west of Northern Ireland, average dissolutional losses of calciumare greater from a lichen-free limestone surface compared with a predominantly endolithic lichen-covered surface by just under 1.25 times. During colderwintermonths, the lichen free surface experiences calcium loss almost 1.5 times greater than the lichen-covered surface. Using extrapolation to upscale from the micro-catchment sample scale, for the year of sample exposure, the rate of calcium loss is 1.001 g m−2 a−1 from lichen-covered limestone surfaces and 1.228 gm−2 a−1 from lichen-free bare limestone surfaces. This research has implications for our understanding of karst environments, the contribution of lichens to karren development and the conservation of lichen-colonised dimension stone within a cultural setting.

Weathering resistance of thin plasma polymer films on pre-coated steel

O trabalho apresentado teve origem no projecto de investigação “Tailored Thin Plasma Polymers Films for Surface Engineering of Coil Coated Steel”, financiado pelo Programa Europeu ECSC Steel Research. Sistemas de aço galvanizado pré-pintado em banda à base de poliéster e poliuretano foram submetidos a um processo de polimerização por plasma onde um filme fino foi depositado de modo a modificar as propriedades de superfície. Foram usados reactores de cátodo oco, microondas e rádio frequência para a deposição do polímero fino. Os sistemas preparados foram analisados de modo a verificar a influência do processo de polimerização por plasma na alteração das propriedades barreira dos sistemas pré-pintados em banda. Foi estudado o efeito dos diferentes passos do processo de polimerização por plasma, bem como o efeito de diferentes variáveis operatórias. A mistura precursora foi variada de modo a modificar as propriedades da superfície de modo a poder vir a obter maior hidrofobicidade, maior resistência a marcas digitais, bem como maior facilidade de limpeza. Os testes foram conduzidos em solução de NaCl 0,5 M. Para o trabalho foram usadas técnicas de análise da morfologia da superfície como Microscopia de Força Atómica e Microscopia Electrónica de Varrimento. As propriedades electroquímicas dos sistemas foram estudadas por Espectroscopia de Impedância Electroquímica. A estrutura dos filmes gerados no processo de polimerização por plasma foi caracterizada por Microscopia de Transmissão Electrónica. A modificação das propriedades ópticas devido ao processo de polimerização por plasma foi também obtida.

“Weathering a Hidden Storm”: An Application of Andersen’s Behavioral Model of Health, and Health Services Use for Those with Diagnosable Anxiety Disorder

Abstract: Research has primarily focused on depression and mood disorders, but little research has been devoted to an examination of mental health services use amongst those with diagnosable anxiety disorder (Wittchen et al., 2002; Bergeron et al., 2005). This study examined the possible predicting factors for mental health services utilization amongst those with identifiable anxiety disorder in the Canadian population. The methods used for this study was the application of Andersen’s Behavioral Model of Health Services Use, where predisposing, need and enabling characteristics were regressed on the dependent variable of mental health services use. This study used the Canadian Community Health Survey (cycle 1.2: Mental Health and Well-Being) in a secondary data analysis. Several multiple logistics models predicted the likelihood to seek and use mental health services. Predisposing characteristics of gender and age, Enabling characteristics of education and geographical location, and those with co-occurring mood disorders were at the greatest increased likelihood to seek and use mental health services.

"Weathering a hidden storm" : an application of Andersen's behavioral model of health, and health services use for those with diagnosable anxiety disorder

"Weathering a Hidden Storm": An App~ication of Andersen's Behaviora~ Mode~ of Hea~th, and Hea~th Services Use for Those With Diagnosab~e Anxiety Disorder Research has primarily focused on depression and mood disorders, but little research has been devoted to an examination of mental health services use amongst those with diagnosable anxiety disorder (Wittchen et al., 2002; Bergeron et al., 2005). This study examined the possible predicting factors for mental health services utilization amongst those with identifiable anxiety disorder in the Canadian population. The methods used for this study was the application of Andersen's Behavioral Model of Health Services Use, where predisposing, need and enabling 111 characteristics were regressed on the dependent variable of mental health services use. This study used the Canadian Community Health Survey (cycle 1.2: Mental Health and Well- Being) in a secondary data analysis. Several multiple logistics models predicted the likelihood to seek and use mental health services. Predisposing characteristics of gender and age, Enabling characteristics of education and geographical location, and those with co-occurring mood disorders were at the greatest increased likelihood to seek and use mental health services.

Earthworm induced mineral weathering: preliminary results

The role of earthworms in mineral weathering was investigated. The minerals anorthite, biotite, olivine, smectite and kaolinite were mixed with a sterilized manure substrate. Two treatments were used: minerals with earthworms and minerals without earthworms. The earthworms were established in mesocosms and left to process the substrates for 1, 2, 4 and 6 months. Four sacrificial replicates were used per time period. Changes in mineralogy were analysed using X-ray diffraction. Weathering of anorthite, biotite, smectite and kaolinite appears to be accelerated by the earthworms. There was evidence for the transformation of smectite to illite and the formation of a new mineral phase from kaolinite. Olivine appears not to be weathered by earthworms. Different minerals also appear to weather at different rates. (c) 2007 Elsevier Masson SAS. All rights reserved.

Weathering microenvironments on feldspar surfaces: implications for understanding fluid-mineral reactions in soils

The mechanisms by which coatings develop on weathered grain surfaces, and their potential impact on rates of fluid-mineral interaction, have been investigated by examining feldspars from a 1.1 ky old soil in the Glen Feshie chronosequence, Scottish highlands. Using the focused ion beam technique, electron-transparent, foils for characterization by transmission electron microscopy were cut from selected parts of grain surfaces. Some parts were bare whereas others had accumulations, a few micrometres thick, of Weathering products, often mixed with mineral and microbial debris. Feldspar exposed at bare grain surfaces is crystalline throughout and so there is no evidence for the presence of the amorphous 'leached layers' that typically form in acid-dissolution experiments and have been described from some natural Weathering contexts. The weathering products comprise sub-mu m thick crystallites of an Fe-K aluminosilicate, probably smectite, that have grown within an amorphous and probably organic-rich matrix. There is also evidence for crystallization of clays having been mediated by fungal hyphae. Coatings formed within Glen Feshie soils after similar to 1.1 ky are insufficiently continuous or impermeable to slow rates Of fluid-feldspar reactions, but provide valuable insights into the complex Weathering microenvironments oil debris and microbe-covered mineral surfaces.