Automation of Chemical Spray Pyrolysis Unit and Fabrication of Sprayed CuInS2/In2S3 Solar Cell

Aim of the present work was to automate CSP process, to deposit and characterize CuInS2/In2S3 layers using this system and to fabricate devices using these films.An automated spray system for the deposition of compound semiconductor thin films was designed and developed so as to eliminate the manual labour involved in spraying and facilitate standardization of the method. The system was designed such that parameters like spray rate, movement of spray head, duration of spray, temperature of substrate, pressure of carrier gas and height of the spray head from the substrate could be varied. Using this system, binary, ternary as well as quaternary films could be successfully deposited.The second part of the work deal with deposition and characterization of CuInS2 and In2S3 layers respectively.In the case of CuInS2 absorbers, the effects of different preparation conditions and post deposition treatments on the optoelectronic, morphological and structural properties were investigated. It was observed that preparation conditions and post deposition treatments played crucial role in controlling the properties of the films. The studies in this direction were useful in understanding how the variation in spray parameters tailored the properties of the absorber layer. These results were subsequently made use of in device fabrication process.Effects of copper incorporation in In2S3 films were investigated to find how the diffusion of Cu from CuInS2 to In2S3 will affect the properties at the junction. It was noticed that there was a regular variation in the opto-electronic properties with increase in copper concentration.Devices were fabricated on ITO coated glass using CuInS2 as absorber and In2S3 as buffer layer with silver as the top electrode. Stable devices could be deposited over an area of 0.25 cm2, even though the efficiency obtained was not high. Using manual spray system, we could achieve devices of area 0.01 cm2 only. Thus automation helped in obtaining repeatable results over larger areas than those obtained while using the manual unit. Silver diffusion on the cells before coating the electrodes resulted in better collection of carriers.From this work it was seen CuInS2/In2S3 junction deposited through automated spray process has potential to achieve high efficiencies.

Instal·lacions d'una nau magatzem per a un club de golf i automatització del seu reg

El projecte efectua la descripció i càlcul de les instal·lacions d'una nau magatzem per a un club de golf, així com l’automatització del reg i adobament de la gespa per tal d’optimitzar els recursos hídrics. La part de les instal·lacions s’ha separat en cinc blocs en els quals s’ha efectuat una descripció de les característiques de les diferents instal·lacions, el càlcul de línies elèctriques, dimensionament dels equips, col·lectors i distàncies, complint els objectius inicials i la reglamentació vigent. Pel que fa l’automatització del procés, s’han complert els objectius d’optimitzar els recursos hídrics de què disposava el club, aprofitant al màxim les aigües pluvials recollides i permetent la fertilització de la gespa, de manera homogènia a tot el camp

The automation and evaluation of nested clade phylogeographic analysis

Nested clade phylogeographic analysis (NCPA) is a popular method for reconstructing the demographic history of spatially distributed populations from genetic data. Although some parts of the analysis are automated, there is no unique and widely followed algorithm for doing this in its entirety, beginning with the data, and ending with the inferences drawn from the data. This article describes a method that automates NCPA, thereby providing a framework for replicating analyses in an objective way. To do so, a number of decisions need to be made so that the automated implementation is representative of previous analyses. We review how the NCPA procedure has evolved since its inception and conclude that there is scope for some variability in the manual application of NCPA. We apply the automated software to three published datasets previously analyzed manually and replicate many details of the manual analyses, suggesting that the current algorithm is representative of how a typical user will perform NCPA. We simulate a large number of replicate datasets for geographically distributed, but entirely random-mating, populations. These are then analyzed using the automated NCPA algorithm. Results indicate that NCPA tends to give a high frequency of false positives. In our simulations we observe that 14% of the clades give a conclusive inference that a demographic event has occurred, and that 75% of the datasets have at least one clade that gives such an inference. This is mainly due to the generation of multiple statistics per clade, of which only one is required to be significant to apply the inference key. We survey the inferences that have been made in recent publications and show that the most commonly inferred processes (restricted gene flow with isolation by distance and contiguous range expansion) are those that are commonly inferred in our simulations. However, published datasets typically yield a richer set of inferences with NCPA than obtained in our random-mating simulations, and further testing of NCPA with models of structured populations is necessary to examine its accuracy.

The automation of nested clade phylogeographic analysis

ANeCA is a fully automated implementation of Nested Clade Phylogeographic Analysis. This was originally developed by Templeton and colleagues, and has been used to infer, from the pattern of gene sequence polymorphisms in a geographically structured population, the historical demographic processes that have shaped its evolution. Until now it has been necessary to perform large parts of the procedure manually. We provide a program that will take data in Nexus sequential format, and directly output a set of inferences. The software also includes TCS v1.18 and GeoDis v2.2 as part of automation.

Integrative workflow-embedded support for process automation and management

This paper presents the on-going research performed in order to integrate process automation and process management support in the context of media production. This has been addressed on the basis of a holistic approach to software engineering applied to media production modelling to ensure design correctness, completeness and effectiveness. The focus of the research and development has been to enhance the metadata management throughout the process in a similar fashion to that achieved in Decision Support Systems (DSS) to facilitate well-grounded business decisions. The paper sets out the aims and objectives and the methodology deployed. The paper describes the solution in some detail and sets out some preliminary conclusions and the planned future work.

Bio-inspired ant colony optimization based clustering algorithm with mobile sinks for applications in consumer home automation networks

With the fast development of wireless communications, ZigBee and semiconductor devices, home automation networks have recently become very popular. Since typical consumer products deployed in home automation networks are often powered by tiny and limited batteries, one of the most challenging research issues is concerning energy reduction and the balancing of energy consumption across the network in order to prolong the home network lifetime for consumer devices. The introduction of clustering and sink mobility techniques into home automation networks have been shown to be an efficient way to improve the network performance and have received significant research attention. Taking inspiration from nature, this paper proposes an Ant Colony Optimization (ACO) based clustering algorithm specifically with mobile sink support for home automation networks. In this work, the network is divided into several clusters and cluster heads are selected within each cluster. Then, a mobile sink communicates with each cluster head to collect data directly through short range communications. The ACO algorithm has been utilized in this work in order to find the optimal mobility trajectory for the mobile sink. Extensive simulation results from this research show that the proposed algorithm significantly improves home network performance when using mobile sinks in terms of energy consumption and network lifetime as compared to other routing algorithms currently deployed for home automation networks.

XHA: eXtensible Hyper-Automation

O objetivo geral desta dissertação é estudar as possibilidades de flexibilização da função de saída do Sistema Hyper-Automaton além das rígidas possibilidades utilizadas atualmente com a utilização direta do HTML, objetivando eliminar as limitações como execução de aplicações proprietárias, caracteres incompatíveis entre browsers, excesso de tráfego na rede, padronizar aplicações, incrementar recursos didáticos, melhorar o suporte a aplicações multimídia atuais e futuras, facilitar a manutenção, implementação e reuso, alterar o layout de saída no browser de maneira dinâmica, explorar outros recursos de links, estabelecer padrões de organização do material instrucional criado pelo professor e muitas outras. Tal sistema anteriormente desenvolvido e funcionando adequadamente, é baseado no formalismo de Autômatos Finitos com Saída como modelo estrutural para organização de hiperdocumentos instrucionais, em especial em cursos na Web, tornando o material hipermídia independente do controle da aplicação. O Sistema Hyper-Automaton, tornou-se portanto, um sistema semi-automatizado para suporte a cursos na Web. Com o desdobramento da pesquisa, esta procurou ir mais além e descreveu possibilidades de não só estudar os aspectos possíveis de formatação de saída do sistema, mas reestruturá-lo totalmente sobre uma linguagem de markup padrão, buscando atualizá-lo tecnologicamente definindo outras possibilidades para que significativos trabalhos futuros possam de maneira mais clara serem alcançados. Dessa maneira, esta dissertação centra-se no estudo da aplicação de formas de flexibilização do Sistema Hyper-Automaton, tanto na parte da estruturação de documentos que são conteúdos instrucionais armazenados, bem como, na forma desse material tornar-se-á disponível através de navegadores WWW compatíveis com as tecnologias propostas, possibilitando o incremento substancial de funcionalidades necessárias para cursos onde a Web é o principal meio. Esta pesquisa dá prosseguimento a dois trabalhos anteriormente concluídos no PPGC e do Curso de Bacharelado em Ciência da Computação da UFRGS no ano de 2000, na seqüência, Hyper-Automaton: Hipertextos e Cursos na Web Utilizando Autômatos Finitos com Saída, dissertação de mestrado de Júlio Henrique de A. P. Machado e Hyper-Automaton: Implementação e Uso, trabalho de diplomação de Leonardo Penczek.

Modelo de gerenciamento de versões para evolução de Data Warehouses

Sistemas de tomada de decisão baseados em Data Warehouse (DW) estão sendo cada dia mais utilizados por grandes empresas e organizações. O modelo multidimensional de organização dos dados utilizado por estes sistemas, juntamente com as técnicas de processamento analítico on-line (OLAP), permitem análises complexas sobre o histórico dos negócios através de uma simples e intuitiva interface de consulta. Apesar dos DWs armazenarem dados históricos por natureza, as estruturas de organização e classificação destes dados, chamadas de dimensões, não possuem a rigor uma representação temporal, refletindo somente a estrutura corrente. Para um sistema destinado à análise de dados, a falta do histórico das dimensões impossibilita consultas sobre o ambiente real de contextualização dos dados passados. Além disso, as alterações dos esquemas multidimensionais precisam ser assistidas e gerenciadas por um modelo de evolução, de forma a garantir a consistência e integridade do modelo multidimensional sem a perda de informações relevantes. Neste trabalho são apresentadas dezessete operações de alteração de esquema e sete operações de alteração de instâncias para modelos multidimensionais de DW. Um modelo de versões, baseado na associação de intervalos de validade aos esquemas e instâncias, é proposto para o gerenciamento dessas operações. Todo o histórico de definições e de dados do DW é mantido por esse modelo, permitindo análises completas dos dados passados e da evolução do DW. Além de suportar consultas históricas sobre as definições e as instâncias do DW, o modelo também permite a manutenção de mais de um esquema ativo simultaneamente. Isto é, dois ou mais esquemas podem continuar a ter seus dados atualizados periodicamente, permitindo assim que as aplicações possam consultar dados recentes utilizando diferentes versões de esquema.

New technologies, old habits: automation without innovation

This research investigated the underuse of technological tools by innovative organizations which are acknowledged for their use of and familiarity with new technologies. The research conducted an analysis of 58 institutional repositories (IRs) out of 43 educational and research institutions which are internationally renowned for excellence. The core aspect of the analysis was the use of IRs for publishing and dealing with evidence in order to legitimize and add value to scientific research. The following items were analyzed: (a) the logical structuring of scientific communication published in the IRs; (b) the metadata which describe scientific communication based on the terms of the DCMI protocol used; (c) the availability of software functions which facilitate the queries and publication of evidences. Results show that the introduction of IRs did not add value to the quality of research in\ terms of associating and publishing evidence that could back them up. A strong tendency to replicate the traditional library model of physical collections was observed. It was concluded that merely possessing good technological tools is not sufficient for fostering innovation and strategic gains in organizations, even if their implementation takes place in highly promising and favorable environments.