Fiber functionalization for biomedical applications

Deep-eutectic solvents (DES) are considered novel renewable and biodegradable solvents, with a cheap and easy synthesis, without waste production. Later it was discovered a new subclass of DES that even can be biocompatible, since their synthesis uses primary metabolites such as amino acids, organic acids and sugars, from organisms. This subclass was named natural deep-eutectic solvents (NADES). Due to their properties it was tried to study the interaction between these solvents and biopolymers, in order to produce functionalized fibers for biomedical applications. In this way, fibers were produced by using the electrospinning technique. However, it was first necessary to study some physical properties of NADES, as well as the influence of water in their properties. It has been concluded that the water has a high influence on NADES properties, which can be seen on the results obtained from the rheology and viscosity studies. The fluid dynamics had changed, as well as the viscosity. Afterwards, it was tested the viability of using a starch blend. First it was tested the dissolution of these biopolymers into NADES, in order to study the viability of their application in electrospinning. However the results obtained were not satisfactory, since the starch polymers studied did not presented any dissolution in any NADES, or even in organic solvents. In this way it was changed the approach, and it was used other biocompatible polymers. Poly(ethylene oxide), poly(vinyl alcohol) and gelatin were the others biopolymers tested for the electrospinning, with NADES. All polymers show good results, since it was possible to obtain fibers. However for gelatin it was used only eutectic mixtures, containing active pharmaceutical ingredients (API’s), instead of NADES. For this case it was used mandelic acid (antimicrobial properties), choline chloride, ibuprofen (anti-inflammatory properties) and menthol (analgesic properties). The polymers and the produced fibers were characterized by scanning electron microscope (SEM), Transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FTIR). With the help of these techniques it was possible to conclude that it was possible to encapsulate NADES within the fibers. Rheology it was also study for poly(ethylene oxide) and poly(vinyl alcohol), in a way to understand the influence of polymer concentration, on the electrospinning technique. For the gelatin, among the characterization techniques, it was also performed cytotoxicity and drug release studies. The gelatin membranes did not show any toxicity for the cells, since their viability was maintained. Regarding the controlled release profile experiment no conclusion could be drawn from the experiments, due to the rapid and complete dissolution of the gelatin in the buffer solution. However it was possible to quantify the mixture of choline chloride with mandelic acid, allowing thus to complete, and confirm, the information already obtained for the others characterization technique.

Influence of ageing on the properties of bitumen from asphalt mixtures with recycled concrete aggregates

The reuse of recycled concrete aggregates in new hot-mix asphalt can be a more sustainable method of production, but these mixtures may need a heat treatment before compaction to improve their water sensitivity performance. A direct consequence of this treatment is an increase in the hot-mix asphalt resilient modulus. The aim of this paper is to analyse the effect of ageing on the stiffness of asphalt mixtures with different amounts of recycled concrete aggregates, before and after a heat treatment, which was analysed through the assessment of its bitumen properties. Moreover, this paper also aims to analyse whether the rolling thin-film oven test is able to simulate the ageing effect of the heat treatment. In the laboratory work, a paving grade bitumen B50/70 has been used to produce asphalt mixtures with 0% and 30% recycled concrete aggregates, and the bitumen was later characterised (using penetration, softening point, dynamic viscosity and dynamic shear rheometer tests) in various situations, such as when using virgin bitumen, short-term aged bitumen, aged bitumen after heat treatment (simulated with 4 h of rolling thin-film oven test) and bitumen samples recovered from asphalt mixtures with different production mixes (0% and 30% recycled concrete aggregate) and heat treatment conditions (0 and 4 h of curing time in the oven). Based on the results obtained, it could be concluded that the ageing resulting from the heat treatment is the primary cause of the hot-mix asphalt's increased stiffness, while recycled concrete aggregate content has a small influence. Moreover, it could be concluded that when there is no curing time, the recycled concrete aggregate protects the bitumen against ageing. Additionally, it could be stated that the rolling thin-film test is able to adequately simulate the ageing effect of the heat treatment. Thus, this test is useful for determining the ageing suffered by the bitumen when the recycled concrete aggregate mixture is manufactured using a heat treatment.

Recycled asphalt mixtures produced with high percentage of different waste materials

The use of sustainable solutions in construction is not just an option, but is increasingly becoming a need of the Society. Thus, nowadays the recycling of waste materials is a growing technology that needs to be continuously improved, namely by researching new solutions for waste valorisation and by increasing the amount of wastes reused. In the paving industry, the reuse of reclaimed asphalt (RA) is becoming common practice, but needs further research work. Thus, this study aims to increase the incorporation of RA and other waste materials in the production of recycled asphalt mixtures in order to improve their mechanical, environmental and economic performance. Recycled mixtures with 50% RA were analysed in this study, including: i) RA selection, preparation and characterization; ii) incorporation of other waste materials as binder additives or modifiers, like used motor oil (UMO) and waste high density polyethylene (HDPE); iii) production of different mixtures (without additives; with UMO; with UMO and HDPE) and comparison of their performance in order to assess the main advantages of each solution. With this study it was concluded that up to 7.5 % of UMO and 4.0 % of HDPE can be used in a new modified binder for asphalt mixtures with 50 % of RA, which have excellent properties concerning the rutting with WTS = 0.02 mm/103 cycles, the fatigue resistance with ε6 = 160.4, and water sensitivity with an ITSR of 81.9 %.

Recycled asphalt mixtures with foamed bitumen: an alternative to build ecofriendly road pavements

Nowadays, recycling has become a very important objective for the society in the scope of a closed loop product life cycle. In recent years, new recycling techniques have been developed in the area of road pavements that allow the incorporation of high percentages of reclaimed asphalt (RA) materials in recycled asphalt mixtures. The use of foamed bitumen for production of recycled asphalt mixtures is one of those techniques, which also allows the reduction of the mixing temperatures (warm mix technology). However, it is important to evaluate if this solution can maintain or improve the performance of the resulting mixtures. Thus, the main aim of the present study is to assess the performance of warm recycled asphalt mixtures incorporating foamed bitumen as the new binder and 50% RA, in comparison with a control mixture using conventional bitumen. Four mixtures have been produced with 50% RA, one of them at typical high mixing temperatures with a conventional bitumen (control mixture) and the other three with foamed bitumen at different production temperatures. These four mixtures were tested to evaluate their compactability and water sensitivity. The laboratory test results showed that the production of recycled mixtures with foamed bitumen can be reduced by 40ºC without changing the performance of the resulting mixtures.

Evaluation of foamed bitumen efficiency in warm asphalt mixtures recycling

The recycling of pavements is nowadays a very important question to the road paving industry. With the objective of incorporating higher percentages of reclaimed asphalt (RA) materials in recycled asphalt mixtures, new techniques have been developed in the last years. The use of foamed bitumen is normally associated with the production of cold asphalt mixtures, which usually show lower quality standards. However, the objective of the work presented in this paper is to assess the use of foamed bitumen as the binder of warm asphalt mixtures incorporating 30% RA, which have quality standards similar to those of conventional mixtures. Thus, five mixtures have been produced with 30% RA, one of them with a conventional bitumen (control mix) and the others with foamed bitumen at different production temperatures. The mixtures were tested for compactability and water sensitivity and the results show a possible reduction of 25 ºC in the production temperatures, while the water sensitivity test results were kept close to 90 %.

Foamed Bitumen: an alternative way of producing asphalt mixtures

With the constant need to improve and make the production of asphalt mixtures more sustainable, new production techniques have been developed, the implementation of which implies the correct knowledge of their performance. One of the most promising asphalt production techniques is the use of foamed bitumen. However, it is essential to understand how this binder will behave when subject to the expansion process. The loss of volume of the foamed bitumen could be translated by a decay curve, which allows to determine the ideal temperature and water content added to the bitumen in order to assure adequate conditions to the mix the bitumen with the aggregates. On the present study, a conventional 160/220 pen grade bitumen was tested by using different temperatures and water contents, and it was concluded that the optimum temperature for the production of foamed bitumen (with the studied bitumen) is 150 ºC, which corresponds to a viscosity of 0.1 Pa.s. The water content mostly influence the half-life of the bitumen foam, resulting in quicker volume reductions for higher water contents.

In vitro mechanical fatigue behavior of poly-ε-caprolactone macroporous scaffolds for cartilage tissue engineering: Influence of pore filling by a poly(vinyl alcohol) gel

Polymeric scaffolds used in regenerative therapies are implanted in the damaged tissue and subjected to repeated loading cycles. In the case of articular cartilage engineering, an implanted scaffold is typically subjected to long term dynamic compression. The evolution of the mechanical properties of the scaffold during bioresorption has been deeply studied in the past, but the possibility of failure due to mechanical fatigue has not been properly addressed. Nevertheless, the macroporous scaffold is susceptible to failure after repeated loading-unloading cycles. In this work fatigue studies of polycaprolactone scaffolds were carried by subjecting the scaffold to repeated compression cycles in conditions simulating the scaffold implanted in the articular cartilage. The behaviour of the polycaprolactone sponge with the pores filled with a poly(vinyl alcohol) gel simulating the new formed tissue within the pores was compared with that of the material immersed in water. Results were analyzed with Morrow’s criteria for failure and accurate fittings are obtained just up to 200 loading cycles. It is also shown that the presence of poly(vinyl alcohol) increases the elastic modulus of the scaffolds, the effect being more pronounced with increasing the number of freeze/thawing cycles.

Dynamic wet etching of silicon through isopropanol alcohol evaporation

In this paper, Isopropanol (IPA) availability during the anisotropic etching of silicon in Potassium Hydroxide (KOH) solutions was investigated. Squares of 8 to 40 m were patterned to (100) oriented silicon wafers through DWL (Direct Writing Laser) photolithography. The wet etching process was performed inside an open HDPE (High Density Polyethylene) flask with ultrasonic agitation. IPA volume and evaporation was studied in a dynamic etching process, and subsequent influence on the silicon etching was inspected. For the tested conditions, evaporation rates for water vapor and IPA were determined as approximately 0.0417 mL/min and 0.175 mL/min, respectively. Results demonstrate that IPA availability, and not concentration, plays an important role in the definition of the final structure. Transversal SEM (Scanning Electron Microscopy) analysis demonstrates a correlation between microloading effects (as a consequence of structure spacing) and the angle formed towards the (100) plane.

Role of the hypocretin system in cocaine- and alcohol-related behaviors : evidence from hypocretin-deficient mice

RésuméL'addiction aux drogues est une maladie multifactorieile affectant toutes les strates de notre société. Cependant, la vulnérabilité à développer une addiction dépend de facteurs environnementaux, génétiques et psychosociaux. L'addiction aux drogues est décrite comme étant une maladie chronique avec un taux élevé de rechutes. Elle se caractérise par un besoin irrépressible de consommer une drogue et une augmentation progressive de la consommation en dépit des conséquences néfastes. Les mécanismes cérébraux responsables des dépendances aux drogues ne sont que partiellement élucidés, malgré une accumulation croissante d'évidences démontrant des adaptations au niveau moléculaire et cellulaire au sein des systèmes dopaminergique et glutamatergique. L'identification de nouveaux facteurs neurobiologiques responsables de la vulnérabilité aux substances d'abus est cruciale pour le développement de nouveaux traitements thérapeutiques capables d'atténuer et de soulager les symptômes liés à la dépendance aux drogues.Au cours des dernières années, de nombreuses études ont démontré qu'un nouveau circuit cérébral, le système hypocrétinergique, était impliqué dans plusieurs fonctions physiologiques, tel que l'éveil, le métabolisme énergétique, la motivation, le stress et les comportements liés aux phénomènes de récompense. Le système hypocrétinergique est composé d'environ 3000-4000 neurones issus de l'hypothalamus latéral projetant dans tout ie cerveau. Des souris transgéniques pour le gène des hypocrétines ont été générées et leur phénotype correspond à celui des animaux sauvages, excepté le fait qu'elles soient atteintes d'attaques de sommeil similaires à celles observées chez les patients narcoleptiques. H semblerait que les hypocrétines soient requises pour l'acquisition et l'expression de la dépendance aux drogues. Cependant, le mécanisme précis reste encore à être élucidé. Dans ce rapport, nous rendons compte des comportements liés aux phénomènes de récompense liés à l'alcool et à la cocaine chez les souris knock-out (KO), hétérozygotes (HET) et sauvages (WT).Nous avons, dans un premier temps, évalué l'impact d'injections répétées de cocaïne (15 mg/kg, ip) sur la sensibilisation locomotrice et sur le conditionnement place préférence. Nous avons pu observer que les souris WT, HET et KO exprimaient une sensibilisation locomotrice induite par une administration chronique de cocaïne, cependant les souris déficientes en hypocrétines démontraient une sensibilisation retardée et atténuée. Π est intéressant de mentionner que les mâles HET exprimaient une sensibilisation comportementale intermédiaire. Après normalisation des données, toutes les souris exprimaient une amplitude de sensibilisation similaire, excepté les souris mâles KO qui affichaient, le premier jour de traitement, une sensibilisation locomotrice réduite et retardée, reflétant un phénotype hypoactif plutôt qu'une altération de la réponse aux traitements chroniques de cocaïne. Contre toute attente, toutes les souris femelles exprimaient un pattern similaire de sensibilisation locomotrice à la cocaïne. Nous avons ensuite évalué l'effet d'un conditionnement comportemental à un environnement associé à des injections répétées de cocaine (15 mg / kg ip). Toutes les souris, quelque soit leur sexe ou leur génotype, ont manifesté une préférence marquée pour l'environnement apparié à la cocaïne. Après deux semaines d'abstinence à la cocaïne, les mâles et les femelles déficientes en hypocrétines n'exprimaient plus aucune préférence pour le compartiment précédemment associé à la cocaïne. Alors que les souris WT et HET maintenaient leur préférence pour le compartiment associé à la cocaïne. Pour finir, à l'aide d'un nouveau paradigme appelé IntelliCage®, nous avons pu évaluer la consommation de liquide chez les femelles WT, HET et KO. Lorsqu'il n'y avait que de l'eau disponible, nous avons observé que les femelles KO avaient tendance à moins explorer les quatre coins de la cage. Lorsque les souris étaient exposées à quatre types de solutions différentes (eau, ImM quinine ou 0.2% saccharine, alcool 8% et alcool 16%), les souris KO avaient tendance à moins consommer l'eau sucrée et les solutions alcoolisées. Cependant, après normalisation des données, aucune différence significative n'a pu être observée entre les différents génotypes, suggérant que la consommation réduite d'eau sucrée ou d'alcool peut être incombée à l'hypoactivité des souris KO.Ces résultats confirment que le comportement observé chez les souris KO serait dû à des compensations développementales, puisque la sensibilisation locomotrice et le conditionnement comportemental à la cocaïne étaient similaires aux souris HET et WT. En ce qui concerne la consommation de liquide, les souris KO avaient tendance à consommer moins d'eau sucrée et de solutions alcoolisées. Le phénotype hypoactif des souris déficientes en hypocrétine est probablement responsable de leur tendance à moins explorer leur environnement. Il reste encore à déterminer si l'expression de ce phénotype est la conséquence d'un état de vigilance amoindri ou d'une motivation diminuée à la recherche de récompense. Nos résultats suggèrent que les souris déficientes en hypocrétine affichent une motivation certaine à la recherche de récompense lorsqu'elles sont exposées à des environnements où peu d'efforts sont à fournir afin d'obtenir une récompense.AbstractDrug addiction is a multifactorial disorder affecting human beings regardless their education level, their economic status, their origin or even their gender, but the vulnerability to develop addiction depends on environmental, genetic and psychosocial dispositions. Drug addiction is defined as a chronic relapsing disorder characterized by compulsive drug seeking, with loss of control over drug intake and persistent maladaptive decision making in spite of adverse consequences. The brain mechanisms responsible for drug abuse remain partially unknown despite accumulating evidence delineating molecular and cellular adaptations within the glutamatergic and the dopaminergic systems. However, these adaptations do not fully explain the complex brain disease of drug addiction. The identification of other neurobiological factors responsible for the vulnerability to substance abuse is crucial for the development of promising therapeutic treatments able to alleviate signs of drug dependence.For the past few years, growing evidence demonstrated that a recently discovered brain circuit, the hypocretinergic system, is implicated in many physiological functions, including arousal, energy metabolism, motivation, stress and reward-related behaviors. The hypocretin system is composed of a few thousands neurons arising from the lateral hypothalamus and projecting to the entire brain. Hypocretin- deficient mice have been generated, and unexpectedly, their phenotype resembles that of wild type mice excepting sleep attacks strikingly similar to those of human narcolepsy patients. Evidence suggesting that hypocretins are required for the acquisition and the expression of drug addiction has also been reported; however the precise mechanism by which hypocretins modulate drug seeking behaviors remains a matter of debate. Here, we report alcohol and cocaine reward-related behaviors in hypocretin-deficient mice (KO), as well as heterozygous (HET) and wild type (WT) littermates.We first evaluated the impact of repeated cocaine injections (15 mg/kg, ip) on locomotor sensitization and conditioned place preference. We observed that WT, HET and KO mice exhibited behavioral sensitization following repeated cocaine administrations, but hypocretin deficient males displayed a delayed and attenuated response to chronic cocaine administrations. Interestingly, HET males exhibited an intermediate pattern of behavioral sensitization. However, after standardization of the post-injection data versus the period of habituation prior to cocaine injections, all mice displayed similar amplitudes of behavioral sensitization, except a reduced response in KO males on the first day, suggesting that the delayed and reduced cocaine-induced locomotor sensitization may reflect a hypoactive phenotype and probably not an altered response to repeated cocaine administrations. Unexpectedly, all female mice exhibited similar patterns of cocaine-induced behavioral sensitization. We then assessed the behavioral conditioning for an environment repeatedly paired with cocaine injections (15 mg/kg ip). All mice, whatever their gender or genotype, exhibited a robust preference for the environment previously paired with cocaine administrations. Noteworthy, following two weeks of cocaine abstinence, hypocretin-deficient males and females no longer exhibited any preference for the compartment previously paired with cocaine rewards whereas both WT and HET mice continued manifesting a robust preference. We finally assessed drinking behaviors in WT, HET and KO female mice using a novel paradigm, the IntelliCages®. We report here that KO females tended to less explore the four cage comers where water was easily available. When exposed to four different kinds of liquid solutions (water, ImM quinine or saccharine 0.2%, alcohol 8% and alcohol 16%), KO mice tended to less consume the sweet and the alcoholic beverages. However, after data standardization, no significant differences were noticed between genotypes suggesting that the hypoactive phenotype is most likely accountable for the trend regarding the reduced sweet or alcohol intake in KO.Taken together, the present findings confirm that the behavior seen in Hcrt KO mice likely reflects developmental compensations since only a slightly altered cocaine-induced behavioral sensitization and a normal behavioral conditioning with cocaine were observed in these mice compared to HET and WT littermates. With regards to drinking behaviors, KO mice barely displayed any behavioral changes but a trend for reducing sweet and alcoholic beverages. Overall, the most striking observation is the constant hypoactive phenotype seen in the hypocretin-deficient mice that most likely is accountable for their reduced tendency to explore the environment. Whether this hypoactive phenotype is due to a reduced alertness or reduced motivation for reward seeking remains debatable, but our findings suggest that the hypocretin-deficient mice barely display any altered motivation for reward seeking in environments where low efforts are required to access to a reward.

PHA urges 'freshers' to be smart and know their alcohol limits

As 'fresher's week' commences, the Public Health Agency is encouraging students across Northern Ireland to avoid binge drinking and to know their limits if they do choose to drink alcohol.Enjoying new freedoms, at college or university, means taking care of yourself and others and, if you choose to drink, staying within safe alcohol limits. Owen O'Neill, PHA Health and Social Wellbeing Improvement Manager for drugs and alcohol, said: "Some young people may drink more when they leave home, or join their friends in college or university for the first time. They might think that, as young people, they don't have to take care with alcohol, but staying within the safe drinking limits is important for everyone who drinks. Excessive and binge drinking can have lasting effects on health, such as damage to the liver, heart, brain and stomach. Drinking too much can also increase the risk of accidents and antisocial behaviour as well as sexually transmitted infections and unplanned pregnancy"."We would also strongly advise against drinking games. Although they are regarded as a 'bit of fun', in reality they can be very dangerous. As an extreme form of binge drinking, where large quantities of alcohol are consumed in a very short time, drinking games can result in alcohol poisoning, leading to brain damage, coma or death. The PHA encourages students to enjoy their new student life, but urges them to be aware of their alcohol intake and drink responsibly, especially throughout fresher's week, with the many cheap drink promotions currently available."Daily alcohol limits are recommended by the government in order to avoid the risks of excessive and binge drinking in any one session. These are:Men: No more than 3 to 4 units of alcohol a day and no more than 21 units over the course of the week.Women: No more than 2 to 3 units of alcohol a day and no more than 14 units over the course of the week.Examples of units:Can of extra strong lager - 4 unitsBottle of lager - 1.5 unitsPint of standard lager - 2.5 unitsPint of premium larger - 3 unitsSmall pub bottle of wine - 2.25 units70cl bottle of wine - 7 to 10 unitsStandard 275ml of alcopops - 1.5 to 1.8 units70cl bottle of alcopops - 3.75 to 4.5 unitsPub measure of spirits - 1.5 unitsPint of cider - 3 unitsPint of stout - 2.5 unitsIf you do choose to drink alcohol:DON'T:Ever drink and driveDrink on an empty stomachMix alcohol with other drugsDrink in rounds as this may speed up your drinkingLeave your drinks unattendedDO:Take sips rather than gulpsAlternate each alcoholic drink with a non alcoholic drink e.g. water or a soft drinkSet yourself a limit and try to stick to it (refer to daily alcohol limits) Take frequent breaks from drinking to give your body time to recoverTell friends and family where you are going and who you will be withRemember, that for each unit you drink over the daily limit, the risk to your health increases. It's important to spread the units throughout the week - you can't 'save up' your units for the weekend or your holiday. It is also important to drink plenty of water, ideally matching the amount of alcohol you have consumed.So students make smart choices this term - drink sensibly and know your limits!For further information on sensible drinking and alcohol units visit the Public Health Agency's website www.knowyourlimits.info

PHA reinforce sensible drinking in Alcohol Awareness Week

Recent health figures show that 20% of adults surveyed admitted to drinking over the weekly alcohol limits (1)so the Public Health Agency is using Alcohol Awareness Week (14-20th November) to reinforce the importance of drinking sensibly and staying within safe alcohol limits.Government guidelines on safe drinking are 21 units per week for males and 14 units per week for females. Staying within these limits is important as excessive and binge drinking can lead, in the short term, to increased risk of accidents, antisocial behaviour, impact on relationships, unplanned pregnancy. Longer term it can damage the liver, heart, brain and stomach, not to mention the other human costs, and costs to the economy and society as a whole.Owen O'Neill, PHA Health and Social Wellbeing Improvement Manager and Drugs and Alcohol Lead, said: "The Department of Health, Social Services and Public Safety's drinking limits are in place to encourage the public to develop safe and sensible drinking habits. However, these recent figures highlight that not everyone is adhering to these limits. It is crucial that those who do decide to have a drink do so in moderation and stick to the recommended limits to prevent any long or short term damages".The message is clear, if you drink, remember to be smart and enjoy alcohol within safe limits. People should follow the recommended daily alcohol intake. These are:Men: No more than 3 to 4 units of alcohol a day and no more than 21 units over the course of the week.Women: No more than 2 to 3 units of alcohol a day and no more than 14 units over the course of the week.Examples of units:Can of extra strong lager - 4 unitsBottle of lager - 1.5 unitsPint of standard lager - 2.5 unitsPint of premium larger - 3 unitsSmall pub bottle of wine - 2.25 unitsPub measure of spirits - 1.5 unitsPint of cider - 3 unitsPint of stout - 2.5 units. Remember, that for each unit you drink over the daily limit, the risk to your health increases. It's important to spread the units throughout the week - you can't 'save up' your units for the weekend or an upcoming holiday. It is also important to drink plenty of water, ideally matching the amount of alcohol you have consumed.For further information on sensible drinking and alcohol units visit the Public Health Agency's website www.knowyourlimits.infoReference(1) Health Survey Northern Ireland: first results from the 2010/2011 survey (2011) DHSSPS, http://dhsspsni.giv/index/stats_research/stats-public-health.htm

Risk assessment of herbicide mixtures in a large European lake

Lake Geneva is one of the largest European lakes with a surface area of 580 km2. Its catchment area covers 7400 km2, of which approximately 20% is arable land. Monitoring campaigns have been carried out in 2004 and 2005 to determine the contamination of the lake by pesticides. The results highlight the widespread presence of herbicides in water, the measured concentrations for most substances remaining constant in 2004 and 2005. However, for some individual herbicides the concentrations increased drastically (e.g., the herbicide foramsulfuron). We assessed the environmental risk of the herbicides detected in the lake using water quality criteria recently determined for the Swiss environmental protection agency. Furthermore, we assessed the risk of herbicide mixtures, grouped based upon their mode of action. Generally, the risk estimated for all single substances is low, except for some sulfonylurea compounds. For these substances, the measured concentrations are higher than the predicted no-effect concentration. Impact on the flora of the lake can therefore not be excluded. When mixtures of pesticides with similar mode of action are taken into account, the risk remains lower than the mixture water quality criteria for all groups, but can reach as high as one third of this quality criteria. A further step would therefore be to assess the risk of the total pesticide mixture, including similar and dissimilar modes of action

Steady-state equilibrium phase inversion recovery ON-resonant water suppression (IRON) MR angiography in conjunction with superparamagnetic nanoparticles. A robust technique for imaging within a wide range of contrast agent dosages.

PURPOSE: To investigate the ability of inversion recovery ON-resonant water suppression (IRON) in conjunction with P904 (superparamagnetic nanoparticles which consisting of a maghemite core coated with a low-molecular-weight amino-alcohol derivative of glucose) to perform steady-state equilibrium phase MR angiography (MRA) over a wide dose range. MATERIALS AND METHODS: Experiments were approved by the institutional animal care committee. Rabbits (n = 12) were imaged at baseline and serially after the administration of 10 incremental dosages of 0.57-5.7 mgFe/Kg P904. Conventional T1-weighted and IRON MRA were obtained on a clinical 1.5 Tesla (T) scanner to image the thoracic and abdominal aorta, and peripheral vessels. Contrast-to-noise ratios (CNR) and vessel sharpness were quantified. RESULTS: Using IRON MRA, CNR and vessel sharpness progressively increased with incremental dosages of the contrast agent P904, exhibiting constantly higher contrast values than T1 -weighted MRA over a very wide range of contrast agent doses (CNR of 18.8 ± 5.6 for IRON versus 11.1 ± 2.8 for T1 -weighted MRA at 1.71 mgFe/kg, P = 0.02 and 19.8 ± 5.9 for IRON versus -0.8 ± 1.4 for T1-weighted MRA at 3.99 mgFe/kg, P = 0.0002). Similar results were obtained for vessel sharpness in peripheral vessels, (Vessel sharpness of 46.76 ± 6.48% for IRON versus 33.20 ± 3.53% for T1-weighted MRA at 1.71 mgFe/Kg, P = 0.002, and of 48.66 ± 5.50% for IRON versus 19.00 ± 7.41% for T1-weighted MRA at 3.99 mgFe/Kg, P = 0.003). CONCLUSION: Our study suggests that quantitative CNR and vessel sharpness after the injection of P904 are consistently higher for IRON MRA when compared with conventional T1-weighted MRA. These findings apply for a wide range of contrast agent dosages.

Soil, water and nutrient losses by interrill erosion from green cane cultivation

Interrill erosion occurs by the particle breakdown caused by raindrop impact, by particle transport in surface runoff, by dragging and suspension of particles disaggregated from the soil surface, thus removing organic matter and nutrients that are essential for agricultural production. Crop residues on the soil surface modify the characteristics of the runoff generated by rainfall and the consequent particle breakdown and sediment transport resulting from erosion. The objective of this study was to determine the minimum amount of mulch that must be maintained on the soil surface of a sugarcane plantation to reduce the soil, water and nutrient losses by decreasing interrill erosion. The study was conducted in Pradópolis, São Paulo State, in 0.5 x 1.0 m plots of an Oxisol, testing five treatments in four replications. The application rates were based on the crop residue production of the area of 1.4 kg m-2 (T1- no cane trash; T2-25 % of the cane trash; T3- 50 % trash; T4-75 % trash; T5-100 % sugarcane residues on the surface), and simulated rainfall was applied at an intensity of 65 mm h-1 for 60 min. Runoff samples were collected in plastic containers and soon after taken to the laboratory to quantify the losses of soil, water and nutrients. To minimize soil loss by interrill erosion, 75 % of the cane mulch must be maintained on the soil, to control water loss 50 % must be maintained and 25 % trash controls organic matter and nutrient losses. This information can contribute to optimize the use of this resource for soil conservation on the one hand and the production of clean energy in sugar and alcohol industries on the other.

Effect of rock powder and vinasse on two types of soils

Can vinasse accelerate the change of minerals in rock dust to obtain fertilizers, using residues from alcohol agro-industries and mining? Answering this question was the main objective of this study. Therefore, an experiment was set up in the laboratory in a completely randomized design using Polyvinyl Chloride (PVC) columns, in which the 0-50 cm layers of a clayey soil (eutroferric Red Oxisol) and sandy soil (Typic Quartzipsamment) were reproduced. We applied three different rates of basalt powder (0.0; 2.0, and 4.0 t ha-1) and one rate of vinasse (200 m³ ha-1) to the soils. The control was made by treatments with water (200 m³ ha-1) with the same rates of rock powder. Samples were first collected on the surface of each column (1, 15, 30, 45, 60, and 90 days after the application of vinasse and rock powder), and, at the end of the experiment, at the various depths and in leached water, to determine pH and the concentration of soluble Ca2+, Mg2+, and K+. There was a significant effect of the solvent and the soil on the surface layer, with higher concentrations found in the treatments with vinasse and in clayey soil, confirming the potential of vinasse to alter minerals in basalt powder. The resulting levels from the beginning to the end of the experiment suggest that sorption phenomena with neoformed mineral phases or organic acids may have occurred. It may be concluded that the use of rock powder and vinasse mixtures is a promising alternative for soil fertilization and recycling of waste from the sugarcane and mining industries.