Design and management of sustainable built environments

The United Nation Intergovernmental Panel on Climate Change (IPCC) makes it clear that climate change is due to human activities and it recognises buildings as a distinct sector among the seven analysed in its 2007 Fourth Assessment Report. Global concerns have escalated regarding carbon emissions and sustainability in the built environment. The built environment is a human-made setting to accommodate human activities, including building and transport, which covers an interdisciplinary field addressing design, construction, operation and management. Specifically, Sustainable Buildings are expected to achieve high performance throughout the life-cycle of siting, design, construction, operation, maintenance and demolition, in the following areas: • energy and resource efficiency; • cost effectiveness; • minimisation of emissions that negatively impact global warming, indoor air quality and acid rain; • minimisation of waste discharges; and • maximisation of fulfilling the requirements of occupants’ health and wellbeing. Professionals in the built environment sector, for example, urban planners, architects, building scientists, engineers, facilities managers, performance assessors and policy makers, will play a significant role in delivering a sustainable built environment. Delivering a sustainable built environment needs an integrated approach and so it is essential for built environment professionals to have interdisciplinary knowledge in building design and management . Building and urban designers need to have a good understanding of the planning, design and management of the buildings in terms of low carbon and energy efficiency. There are a limited number of traditional engineers who know how to design environmental systems (services engineer) in great detail. Yet there is a very large market for technologists with multi-disciplinary skills who are able to identify the need for, envision and manage the deployment of a wide range of sustainable technologies, both passive (architectural) and active (engineering system),, and select the appropriate approach. Employers seek applicants with skills in analysis, decision-making/assessment, computer simulation and project implementation. An integrated approach is expected in practice, which encourages built environment professionals to think ‘out of the box’ and learn to analyse real problems using the most relevant approach, irrespective of discipline. The Design and Management of Sustainable Built Environment book aims to produce readers able to apply fundamental scientific research to solve real-world problems in the general area of sustainability in the built environment. The book contains twenty chapters covering climate change and sustainability, urban design and assessment (planning, travel systems, urban environment), urban management (drainage and waste), buildings (indoor environment, architectural design and renewable energy), simulation techniques (energy and airflow), management (end-user behaviour, facilities and information), assessment (materials and tools), procurement, and cases studies ( BRE Science Park). Chapters one and two present general global issues of climate change and sustainability in the built environment. Chapter one illustrates that applying the concepts of sustainability to the urban environment (buildings, infrastructure, transport) raises some key issues for tackling climate change, resource depletion and energy supply. Buildings, and the way we operate them, play a vital role in tackling global greenhouse gas emissions. Holistic thinking and an integrated approach in delivering a sustainable built environment is highlighted. Chapter two demonstrates the important role that buildings (their services and appliances) and building energy policies play in this area. Substantial investment is required to implement such policies, much of which will earn a good return. Chapters three and four discuss urban planning and transport. Chapter three stresses the importance of using modelling techniques at the early stage for strategic master-planning of a new development and a retrofit programme. A general framework for sustainable urban-scale master planning is introduced. This chapter also addressed the needs for the development of a more holistic and pragmatic view of how the built environment performs, , in order to produce tools to help design for a higher level of sustainability and, in particular, how people plan, design and use it. Chapter four discusses microcirculation, which is an emerging and challenging area which relates to changing travel behaviour in the quest for urban sustainability. The chapter outlines the main drivers for travel behaviour and choices, the workings of the transport system and its interaction with urban land use. It also covers the new approach to managing urban traffic to maximise economic, social and environmental benefits. Chapters five and six present topics related to urban microclimates including thermal and acoustic issues. Chapter five discusses urban microclimates and urban heat island, as well as the interrelationship of urban design (urban forms and textures) with energy consumption and urban thermal comfort. It introduces models that can be used to analyse microclimates for a careful and considered approach for planning sustainable cities. Chapter six discusses urban acoustics, focusing on urban noise evaluation and mitigation. Various prediction and simulation methods for sound propagation in micro-scale urban areas, as well as techniques for large scale urban noise-mapping, are presented. Chapters seven and eight discuss urban drainage and waste management. The growing demand for housing and commercial developments in the 21st century, as well as the environmental pressure caused by climate change, has increased the focus on sustainable urban drainage systems (SUDS). Chapter seven discusses the SUDS concept which is an integrated approach to surface water management. It takes into consideration quality, quantity and amenity aspects to provide a more pleasant habitat for people as well as increasing the biodiversity value of the local environment. Chapter eight discusses the main issues in urban waste management. It points out that population increases, land use pressures, technical and socio-economic influences have become inextricably interwoven and how ensuring a safe means of dealing with humanity’s waste becomes more challenging. Sustainable building design needs to consider healthy indoor environments, minimising energy for heating, cooling and lighting, and maximising the utilisation of renewable energy. Chapter nine considers how people respond to the physical environment and how that is used in the design of indoor environments. It considers environmental components such as thermal, acoustic, visual, air quality and vibration and their interaction and integration. Chapter ten introduces the concept of passive building design and its relevant strategies, including passive solar heating, shading, natural ventilation, daylighting and thermal mass, in order to minimise heating and cooling load as well as energy consumption for artificial lighting. Chapter eleven discusses the growing importance of integrating Renewable Energy Technologies (RETs) into buildings, the range of technologies currently available and what to consider during technology selection processes in order to minimise carbon emissions from burning fossil fuels. The chapter draws to a close by highlighting the issues concerning system design and the need for careful integration and management of RETs once installed; and for home owners and operators to understand the characteristics of the technology in their building. Computer simulation tools play a significant role in sustainable building design because, as the modern built environment design (building and systems) becomes more complex, it requires tools to assist in the design process. Chapter twelve gives an overview of the primary benefits and users of simulation programs, the role of simulation in the construction process and examines the validity and interpretation of simulation results. Chapter thirteen particularly focuses on the Computational Fluid Dynamics (CFD) simulation method used for optimisation and performance assessment of technologies and solutions for sustainable building design and its application through a series of cases studies. People and building performance are intimately linked. A better understanding of occupants’ interaction with the indoor environment is essential to building energy and facilities management. Chapter fourteen focuses on the issue of occupant behaviour; principally, its impact, and the influence of building performance on them. Chapter fifteen explores the discipline of facilities management and the contribution that this emerging profession makes to securing sustainable building performance. The chapter highlights a much greater diversity of opportunities in sustainable building design that extends well into the operational life. Chapter sixteen reviews the concepts of modelling information flows and the use of Building Information Modelling (BIM), describing these techniques and how these aspects of information management can help drive sustainability. An explanation is offered concerning why information management is the key to ‘life-cycle’ thinking in sustainable building and construction. Measurement of building performance and sustainability is a key issue in delivering a sustainable built environment. Chapter seventeen identifies the means by which construction materials can be evaluated with respect to their sustainability. It identifies the key issues that impact the sustainability of construction materials and the methodologies commonly used to assess them. Chapter eighteen focuses on the topics of green building assessment, green building materials, sustainable construction and operation. Commonly-used assessment tools such as BRE Environmental Assessment Method (BREEAM), Leadership in Energy and Environmental Design ( LEED) and others are introduced. Chapter nineteen discusses sustainable procurement which is one of the areas to have naturally emerged from the overall sustainable development agenda. It aims to ensure that current use of resources does not compromise the ability of future generations to meet their own needs. Chapter twenty is a best-practice exemplar - the BRE Innovation Park which features a number of demonstration buildings that have been built to the UK Government’s Code for Sustainable Homes. It showcases the very latest innovative methods of construction, and cutting edge technology for sustainable buildings. In summary, Design and Management of Sustainable Built Environment book is the result of co-operation and dedication of individual chapter authors. We hope readers benefit from gaining a broad interdisciplinary knowledge of design and management in the built environment in the context of sustainability. We believe that the knowledge and insights of our academics and professional colleagues from different institutions and disciplines illuminate a way of delivering sustainable built environment through holistic integrated design and management approaches. Last, but not least, I would like to take this opportunity to thank all the chapter authors for their contribution. I would like to thank David Lim for his assistance in the editorial work and proofreading.

Energy efficient building design

This chapter covers the basic concepts of passive building design and its relevant strategies, including passive solar heating, shading, natural ventilation, daylighting and thermal mass. In environments with high seasonal peak temperatures and/or humidity (e.g. cities in temperate regions experiencing the Urban Heat Island effect), wholly passive measures may need to be supplemented with low and zero carbon technologies (LZCs). The chapter also includes three case studies: one residential, one demonstrational and one academic facility (that includes an innovative passive downdraught cooling (PDC) strategy) to illustrate a selection of passive measures.

Impact of anthropogenic heat emissions on London's temperatures

We investigate the role of the anthropogenic heat flux on the urban heat island of London. To do this, the time-varying anthropogenic heat flux is added to an urban surface-energy balance parametrization, the Met Office–Reading Urban Surface Exchange Scheme (MORUSES), implemented in a 1 km resolution version of the UK Met Office Unified Model. The anthropogenic heat flux is derived from energy-demand data for London and is specified on the model's 1 km grid; it includes variations on diurnal and seasonal time-scales. We contrast a spring case with a winter case, to illustrate the effects of the larger anthropogenic heat flux in winter and the different roles played by thermodynamics in the different seasons. The surface-energy balance channels the anthropogenic heat into heating the urban surface, which warms slowly because of the large heat capacity of the urban surface. About one third of this additional warming goes into increasing the outgoing long-wave radiation and only about two thirds goes into increasing the sensible heat flux that warms the atmosphere. The anthropogenic heat flux has a larger effect on screen-level temperatures in the winter case, partly because the anthropogenic flux is larger then and partly because the boundary layer is shallower in winter. For the specific winter case studied here, the anthropogenic heat flux maintains a well-mixed boundary layer through the whole night over London, whereas the surrounding rural boundary layer becomes strongly stably stratified. This finding is likely to have important implications for air quality in winter. On the whole, inclusion of the anthropogenic heat flux improves the comparison between model simulations and measurements of screen-level temperature slightly and indicates that the anthropogenic heat flux is beginning to be an important factor in the London urban heat island.

Fator de visão do céu e intensidade de ilhas de calor na escala do pedestre

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Radiation balance at the surface in the city of So Paulo, Brazil: diurnal and seasonal variations

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Análise do campo térmico de cidades de médio porte: estudo de caso no pólo textil de Americana - SP

Pós-graduação em Geografia - IGCE

Avaliação de parâmetros micrometeorológicos, do conforto e da percepção térmica na área urbana da cidade de Belém-PA

No presente trabalho foram avaliados alguns elementos micrometeorológicos e o conforto térmico na cidade de Belém, juntamente com uma análise das questões da segregação social deste espaço urbano, contribuindo com as pesquisas de climatologia urbana em regiões tropicais que possuem uma especificidade climática, com um forte efeito da sazonalidade durante o ano. Foram empregados na pesquisa informações micrometeorológicas obtidas através de estações meteorológicas e microloggers distribuídos pela cidade, questionários, informações de cobertura do solo oriundas de imagens de satélite e as tipologias sociais por meio de levantamento bibliográfico. As informações quantitativas foram analisadas através de interpolações e correlações numéricas e relacionadas de forma qualitativa às informações adquiridas em campo. Os resultados mostraram que as áreas menos confortáveis termicamente foram as que possuíam menor cobertura vegetal e maior quantidade de áreas edificadas e pavimentadas, enquanto que as áreas mais confortáveis foram as que apresentaram características contrárias a anterior. Não foi detectada a existência de um padrão bem definido entre as tipologias socioespaciais das habitações com as condições de conforto. Foi encontrada uma ilha de calor de baixa intensidade sobre a cidade, assim como uma forte sazonalidade da precipitação pluvial, da temperatura do ar e da umidade relativa do ar. Na cidade de Belém, grande parte do período diurno foi desconfortável termicamente, e a intensidade desse desconforto variou de acordo com as características de uso e ocupação do solo urbano.

Análise dos efeitos térmicos de superfície na cidade de Belém-Pará-Brasil utilizando imagens de satélite

Utilizando dados observacionais de precipitação e temperatura do ar para o período de 1967 a 2008, do qual se elaborou a climatologia destas variáveis, e analisando as condições atmosféricas influenciadas pelo fenômeno ENOS, pretende-se identificar, caracterizar e analisar os efeitos térmicos espaciais na cidade de Belém-PA, a partir de dados meteorológicos de superfície e de imagens do sensor MODIS, o qual está disposto sobre a plataforma do satélite Aqua. Observou-se que, a média da precipitação anual foi de 2978,6 mm/ano, e que apresenta tendência de aumento ao longo dos anos, comportamento semelhante observou-se para a temperatura do ar. Em geral, os resultados mostram dois núcleos de maiores intensidade de temperaturas da superfície, um na cidade de Belém e outro na cidade vizinha, Ananindeua. Estes variam espacialmente e temporalmente de intensidade. Durante eventos de La Niña, o núcleo da ilha de calor fica localizado em bairros mais próximos a baía do Guajará, enquanto que durante eventos de El Niño estes bairros apresentam temperaturas mais amenas do que os bairros mais afastados dos corpos hídricos. Observou-se ainda que, a amplitude térmica da temperatura superficial entre áreas urbana e rural variam bastante, com a maior variação de 30,8°C e a menor de 16,8°C. Neste sentido, as maiores temperaturas da superfície foram observadas nos bairros com baixo NDVI, conseqüência de uma urbanização mais densa. As superfícies urbanas e as superfícies vegetadas apresentam relações de causa e efeito muito próximas, principalmente, durante o período menos chuvoso, isto pode ser percebido pela correlação que apresenta valor acima de 50%. Este estudo apresenta resultados que auxiliam no melhor entendimento do comportamento e dos efeitos térmicos espaciais e temporais na cidade de Belém, pois o uso de imagens do satélite é de fundamental importância para a identificação e caracterização das condições ambientais climáticas e ilhas de calor urbanas.

Análise da percepção da variação do campo térmico na cidade de São Paulo-SP: o exemplo da subprefeitura Sé

This research aimed to analyze the spatial area for the design of the Heat Island of Subprefecture Sé, in São Paulo-SP, with the support of geotecnology and based on the study of environmental perception. We used remote sensing products such as maps ofland use and soil temperature and apparent surface to evaluate the thermal conditions considered critical points in the central area of the municipality. The methodology used was qualitative analysis, based on interviews with the people, allowing rescue geoecology the conditioning aspects of the city, with an emphasis on environmental perception. This study aimed toanalyze the perception of the variation of the thermal field in São Paulo. The results indicated that (95%) of respondents feel that the temperature of the central area has increased each year, and the district that stood out was the Sé, due to intense use and occupation of land and contribute one of the largest shopping centers. Districts with points given for having better thermal comfort were Santa Cecília, the República and Bela Vista, due to their larger amount of green areas by fiscal court, which act as local refrigerators. It was found that the respondents have the perception and awareness of their spa directly related to the quality of life. Through analysis of several variables involved, proposals and strategies may support public policies and urban planning

Classificação de potenciais unidades climáticas em Presidente Prudente-SP

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Radiation balance at the surface in the city of So Paulo, Brazil: diurnal and seasonal variations

The main goal of this work is to describe the diurnal and seasonal variations of the radiation balance components at the surface in the city of So Paulo based on observations carried out during 2004. Monthly average hourly values indicate that the amplitudes of the diurnal cycles of net radiation (Q*), downwelling and upwelling shortwave radiation (SW(DW), SW(UP)), and longwave radiations (LW(DW), LW(UP)) in February were, respectively, 37%, 14%, 19%, 11%, and 5% larger than they were in August. The monthly average daily values indicate a variation of 60% for Q*, with a minimum in June and a maximum in December; 45% for SW(DW), with a minimum in May and a maximum in September; 50% for SW(UP), with a minimum in June and a maximum in September; 13% for LW(DW), with a minimum in July and a maximum in January; and 9% for LW(UP), with a minimum in July and a maximum in February. It was verified that the atmospheric broadband transmissivity varied from 0.36 to 0.57; the effective albedo of the surface varied from 0.08 to 0.10; and the atmospheric effective emissivity varied from 0.79 to 0.92. The surface effective emissivity remained approximately constant and equal to 0.96. The albedo and surface effective emissivity for So Paulo agreed with those reported for urban areas in Europe and North America cities. This indicates that material and geometric effects on albedo and surface emissivity in So Paulo are similar to ones observed in typical middle latitudes cities. On the other hand, it was found that So Paulo city induces an urban heat island with daytime maximum intensity varying from 2.6A degrees C in July (16:00 LT) to 5.5A degrees C in September (15:00 LT). The analysis of the radiometric properties carried out here indicate that this daytime maximum is a primary response to the seasonal variation of daily values of net solar radiation at the surface.

Analisi di immagini termiche aeree e satellitari per indagini multiscala in ambito urbano

L’alta risoluzione nel telerilevamento termico (Thermal Remote Sensing) da aereo o satellitare si rivela molto importante nell’analisi del comportamento termico delle superfici, in particolare per lo studio dei fenomeni climatici locali dello spazio urbano. La stato termico dell'ambiente urbano è oggi motivo di grande interesse per ricercatori, organi istituzionali e cittadini. Uno dei maggiori campi di studio del comportamento termico urbano interessa il problema energetico: la riduzione dei consumi e delle emissioni di CO2 è un obiettivo primario da perseguire per uno sviluppo sostenibile, spesso supportato da criteri legislativi e progetti comunitari. Su scala differente e con caratteristiche differenti, un altro degli argomenti che scuote da anni e con notevole interesse la ricerca scientifica, è il fenomeno termico urbano che prende il nome di isola di calore; questa si sviluppa non solo in conseguenza al calore sensibile rilasciato da attività antropiche, ma anche a causa della sempre maggiore conversione del territorio rurale in urbanizzato (inurbamento), con conseguente riduzione del fenomeno dell’evapotraspirazione. Oggetto di questa dissertazione è lo studio del comportamento termico delle superfici in ambito urbano, sperimentato sulla città di Bologna. Il primo capitolo si interessa dei principi e delle leggi fisiche sui quali è basato il telerilevamento effettuato nelle bende spettrali dell’infrarosso termico. Viene data una definizione di temperatura radiometrica e cinematica, tra loro legate dall’emissività. Vengono esposti i concetti di risoluzione (geometrica, radiometrica, temporale e spettrale) dell’immagine termica e viene data descrizione dei principali sensori su piattaforma spaziale per l’alta risoluzione nel TIR (ASTER e Landsat). Il secondo capitolo si apre con la definizione di LST (Land Surface Temperature), parametro del terreno misurato col telerilevamento, e ne viene descritta la dipendenza dal flusso della radiazione in atmosfera e dalle condizioni di bilancio termico della superficie investigata. Per la sua determinazione vengono proposti metodi diversi in funzione del numero di osservazioni disponibili nelle diverse bande spettrali dell’IR termico. In chiusura sono discussi i parametri che ne caratterizzano la variabilità. Il capitolo terzo entra nel dettaglio del telerilevamento termico in ambito urbano, definendo il fenomeno dell’Urban Heat Island su tutti i livelli atmosferici interessati, fornendo un quadro di operabilità con gli strumenti moderni di rilievo alle differenti scale (analisi multiscala). Un esempio concreto di studio multiscala dei fenomeni termici urbani è il progetto europeo EnergyCity, volto a ridurre i consumi energetici e le emissioni di gas serra di alcune città del centro Europa. Il capitolo quarto riporta la sperimentazione condotta sull’isola di calore urbana della città di Bologna tramite immagini ASTER con risoluzione spaziale 90 m nel TIR e ricampionate a 15 m dal VIS. Lo studio dell’isola di calore si è effettuata a partire dal calcolo della Land Surface Temperature utilizzando valori di emissività derivati da classificazione delle superfici al suolo. Per la validazione dei dati, in alternativa alle stazioni di monitoraggio fisse dell’ARPA, presenti nell’area metropolitana della città, si è sperimentato l’utilizzo di data-loggers per il rilievo di temperatura con possibilità di campionamento a 2 sec. installati su veicoli mobili, strumentati con ricevitori GPS, per la misura dei profili di temperatura atmosferica near-ground lungo transetti di attraversamento della città in direzione est-ovest.

Thermal shields for heat loss reduction in Siemens-type CVD reactors

The use of thermal shields to reduce radiation heat loss in Siemens-type CVD reactors is analyzed, both theoretically and experimentally. The potential savings from the use of the thermal shields is first explored using a radiation heat model that takes emissivity variations with wavelength into account, which is important for materials that do not behave as grey bodies. The theoretical calculations confirm that materials with lower surface emissivity lead to higher radiation savings. Assuming that radiation heat loss is responsible for around 50% of the total power consumption, a reduction of 32.9% and 15.5% is obtained if thermal shields with constant emissivities of 0.3 and 0.7 are considered, respectively. Experiments considering different thermal shields are conducted in a laboratory CVD reactor, confirming that the real materials do not behave as grey bodies, and proving that significant energy savings in the polysilicon deposition process are obtained. Using silicon as a thermal shield leads to energy savings of between 26.5-28.5%. For wavelength-dependent emissivities, the model shows that there are significant differences in radiation heat loss, of around 25%, when compared to that of constant emissivity. The results of the model highlight the importance of having reliable data on the emissivities within the relevant range of wavelengths, and at deposition temperatures, which remains a pending issue.

Thermal infrared image processing to assess heat generated by magnetic nanoparticles for hyperthermia applications

Magnetic fluid hyperthermia (MFH) is considered a promising therapeutic technique for the treatment of cancer cells, in which magnetic nanoparticles (MNPs) with superparamagnetic behavior generate mild-temperatures under an AC magnetic field to selectively destroy the abnormal cancer cells, in detriment of the healthy ones. However, the poor heating efficiency of most NMPs and the imprecise experimental determination of the temperature field during the treatment, are two of the majors drawbacks for its clinical advance. Thus, in this work, different MNPs were developed and tested under an AC magnetic field (~1.10 kA/m and 200 kHz), and the heat generated by them was assessed by an infrared camera. The resulting thermal images were processed in MATLAB after the thermographic calibration of the infrared camera. The results show the potential to use this thermal technique for the improvement and advance of MFH as a clinical therapy.