Phase and partitioning behavior of phenols and polycyclic aromatic hydrocarbons in offshore oil and gas produced water

Produced water constitutes the largest volume of waste from offshore oil and gas operations and is composed of a wide range of organic and inorganic compounds. Although treatment processes have to meet strict oil in water regulations, the definition of “oil” is a function of the analysis process and may include aliphatic hydrocarbons which have limited environmental impact due to degradability whilst ignoring problematic dissolved petroleum species. This thesis presents the partitioning behavior of oil in produced water as a function of temperature and salinity to identify compounds of environmental concern. Phenol, p-cresol, and 4-tert-butylphenol were studied because of their xenoestrogenic power; other compounds studied are polycyclic aromatic hydrocarbon PAHs which include naphthalene, fluorene, phenanthrene, and pyrene. Partitioning experiments were carried out in an Innova incubator for 48 hours, temperature was varied from 4ﾟC to 70ﾟC, and two salinity levels of 46.8‰ and 66.8‰ were studied. Results obtained showed that the dispersed oil concentration in the water reduces with settling time and equilibrium was attained at 48 h settling time. Polycyclic aromatic hydrocarbons (PAHs) partitions based on dispersed oil concentration whereas phenols are not significantly affected by dispersed oil concentration. Higher temperature favors partitioning of PAHs into the water phase. Salinity has negligible effect on partitioning pattern of phenols and PAHs studied. Simulation results obtained from the Aspen HYSYS model shows that temperature and oil droplet distribution greatly influences the efficiency of produced water treatment system.

Environmental Impacts of the Deep-Water Oil and Gas Industry : A Review to Guide Management Strategies

The authors would like to thank the leadership of the Deep Ocean Stewardship Initiative (DOSI), including Lisa Levin, Maria Baker, and Kristina Gjerde, for their support in developing this review. This work evolved from a meeting of the DOSI Oil and Gas working group supported by the J.M. Kaplan Fund, and associated with the Deep-Sea Biology Symposium in Aveiro, Portugal in September 2015. The members of the Oil and Gas working group that contributed to our discussions at that meeting or through the listserve are acknowledged for their contributions to this work. We would also like to thank the three reviewers and the editor who provided valuable comments and insight into the work presented here. DJ and AD were supported by funding from the European Union's Horizon 2020 research and innovation programme under the MERCES (Marine Ecosystem Restoration in Changing European Seas) project, grant agreement No 689518. AB was supported by CNPq grants 301412/2013-8 and 200504/2015-0. LH acknowledges funding provided by a Natural Environment Research Council grant (NE/L008181/1). This output reflects only the authors' views and the funders cannot be held responsible for any use that may be made of the information contained therein.

Colorado's Piceance Basin: Variation in the local public finance effects of oil and gas development

A large increase in natural gas production occurred in western Colorado’s Piceance basin in the mid- to late-2000s, generating a surge in population, economic activity, and heavy truck traffic in this rural region. We describe the fiscal effects related to this development for two county governments: Garfield and Rio Blanco, and two city governments: Grand Junction and Rifle. Counties maintain rural road networks in Colorado, and Garfield County’s ability to fashion agreements with operators to repair roads damaged during operations helped prevent the types of large new costs seen in Rio Blanco County, a neighboring county with less government capacity and where such agreements were not made. Rifle and Grand Junction experienced substantial oil- and gas-driven population growth, with greater challenges in the smaller, more isolated, and less economically diverse city of Rifle. Lessons from this case study include the value of crafting road maintenance agreements, fiscal risks for small and geographically isolated communities experiencing rapid population growth, challenges associated with limited infrastructure, and the desirability of flexibility in the allocation of oil- and gas-related revenue.

Local government revenue from oil and gas production

Oil and gas production generates substantial revenue for state and local governments. This report examines revenue from oil and gas production flowing to local governments through four mechanisms: (i) state taxes or fees on oil and gas production; (ii) local property taxes on oil and gas property; (iii) leasing of state-owned land; and (iv) leasing of federally owned land. We examine every major oil- and gas-producing state and find that the share of oil and gas production value allocated to and collected by local governments ranges widely, from 0.5 percent to more than 9 percent due to numerous policy differences among states. School districts and trust funds endowing future school operations tend to see the highest share of revenue, followed by counties. Municipalities and other local governments with more limited geographic boundaries tend to receive smaller shares of oil and gas driven revenue. Some states utilize grant programs to allocate revenue to where impacts from the industry are greatest. Others send most revenue to state operating or trust funds, with little revenue earmarked specifically for local governments.

Local fiscal effects of oil and gas development in eight states

Oil and gas production in the United States has increased dramatically in the past 10 years. This growth has important implications for local governments, which often see new revenues from a variety of sources: property taxes on oil and gas property, sales taxes driven by the oil and gas workforce, allocations of state revenues from severance taxes or state and federal leases, leases on local government land, and contributions from oil and gas companies to support local services. At the same time, local governments tend to experience a range of new costs such as road damage caused by heavy industry truck traffic, increased demand for emergency services and law enforcement, and challenges with workforce retention. This report examines county and municipal fiscal effects in 14 oil- and gas-producing regions of eight states: AK, CA, KS, OH, OK, NM, UT, and WV. We find that for most local governments, oil and gas development—whether new or longstanding—has a positive effect on local public finances. However, effects can vary substantially due to a variety of local factors and policy issues. For some local governments, particularly those in rural regions experiencing large increases in development, revenues have not kept pace with rapidly increased costs and demand for services, particularly on road repair.

A Study of Environmental Disclosures in the European Oil and Gas Industry : With Reference to the Global Reporting Initiative

Background and Problem: Sustainability reporting is a growing trend in the society. One of the most exposed industries to environmental matters is the oil and gas industry, which commit to sustainability reporting in order to deal with the industry’s destructive operations. The Global Reporting Initiative (GRI) provides voluntary guidelines in sustainability reporting, which increase transparency for the company’s stakeholders. However, it is controversial that the oil and gas industry put a great effort into sustainability reporting even though the industry is environmentally destructive. This gap is interesting to investigate and will contribute to the academic discussion. Therefore, this thesis will focus on the sustainability reporting in the oil and gas industry and to what extent the industry actually discloses material environmental information about their operations. Purpose: The purpose of this thesis is to examine how the sustainability reporting has changed in the oil and gas industry in Europe. This is performed from a stakeholder perspective. Further, it aims to investigate how oil and gas companies have followed the GRI guidelines and how the reporting has changed over time. Method: A quantitative method is used in order to answer the research questions. The data sample is based on oil and gas companies reporting according to the GRI framework during year 2012 to year 2014. The empirical data is gathered from the studied companies’ environmental category in their sustainability reports. Further, a content analysis technique, with a coding scheme, was set up to interpret and analyse the information. To enable an easy overview of the findings, the relevant data is presented in tables and diagrams. Empirical Findings and Conclusion: The majority of the studied companies have increased their level of compliance in the environmental category. Although, the majority of the companies have increased their reporting, the compliance level differs between the companies. The most reported sectors are the; “Water”, “Biodiversity”, “Emissions”, “Effluents and Waste”, “Compliance”, and “Overall”. Further, the empirical findings show that there is an overall increase in the amount of disclosed information per indicator. The conclusion of this thesis is that the environmental disclosures have increased in the oil and gas industry from year 2012 to 2014.

Effects of IFRS adoption on the financial statements of Nigerian listed entities: the case of oil and gas companies

On 28 July 2010, the Nigerian Federal Executive Council approved January 1, 2012 as the effective date for the convergence of Nigerian Statement of Accounting Standards (SAS) or Nigerian GAAP (NG-GAAP) with International Financial Reporting Standards (IFRS). By this pronouncement, all publicly listed companies and significant public interest entities in Nigeria were statutorily required to issue IFRS based financial statements for the year ended December, 2012. This study investigates the impact of the adoption of IFRS on the financial statements of Nigerian listed Oil and Gas entities using six years of data which covers three years before and three years after IFRS adoption in Nigeria and other African countries. First, the study evaluates the impact of IFRS adoption on the Exploration and Evaluation (E&E) expenditures of listed Oil and Gas companies. Second, it examines the impact of IFRS adoption on the provision for decommissioning of Oil and Gas installations and environmental rehabilitation expenditures. Third, the study analyses the impact of the adoption of IFRS on the average daily Crude Oil production cost per Barrel. Fourth, it examines the extent to which the adoption and implementation of IFRS affects the Key Performance Indicators (KPIs) of listed Oil and Gas companies. The study further explores the impact of IFRS adoption on the contractual relationships between Nigerian Government and Oil and Gas companies in terms of Joint Ventures (JVs) and Production Sharing Contracts (PSCs) as it relates to taxes, royalties, bonuses and Profit Oil Split. A Paired Samples t-test, Wilcoxon Signed Rank test and Gray’s (Gray, 1980) Index of Conservatism analyses were conducted simultaneously where the accounting numbers, financial ratios and industry specific performance measures of GAAP and IFRS were computed and analysed and the significance of the differences of the mean, median and Conservatism Index values were compared before and after IFRS adoption. Questionnaires were then administered to the key stakeholders in the adoption and implementation of IFRS and the responses collated and analysed. The results of the analyses reveal that most of the accounting numbers, financial ratios and industry specific performance measures examined changed significantly as a result of the transition from GAAP to IFRS. The E&E expenditures and the mean cost of Crude Oil production per barrel of Oil and Gas companies increased significantly. The GAAP values of inventories, GPM, ROA, Equity and TA were also significantly different from the IFRS values. However, the differences in the provision for decommissioning expenditures were not statistically significant. Gray’s (Gray, 1980) Conservatism Index shows that Oil and Gas companies were more conservative under GAAP when compared to the IFRS regime. The Questionnaire analyses reveal that IFRS based financial statements are of higher quality, easier to prepare and present to management and easier to compare among competitors across the Oil and Gas sector but slightly more difficult to audit compared to GAAP based financial statements. To my knowledge, this is the first empirical research to investigate the impact of IFRS adoption on the financial statements of listed Oil and Gas companies. The study will therefore make an enormous contribution to academic literature and body of knowledge and void the existing knowledge gap regarding the impact and implications of IFRS adoption on the financial statements of Oil and Gas companies.

Geological Characterisation of Depleted Oil and Gas Reservoirs for Carbon Sequestration Potentials in a Field in the Niger Delta, Nigeria

The injectivity, containment and storage capacity of sandstone reservoirs in a field in the Coastal Swamp depobelt of the onshore eastern Niger Delta were evaluated using wireline logs and seismic data to assess their potentials for carbon dioxide storage and geosequestration. The reservoir formation consists of multilayered alternating beds of sandstone and shale cap rocks. Active seismicity and fracturing intensity are low and growth faults provide the reservoir sealing mechanisms. Three reservoirs were delineated at depths between 3319 m and 3539 m which will keep injected CO2 in a supercritical state. The reservoir depth of at least 800 m, porosity and permeability of more than 10 percent and 20 mD, and a caprock thickness of at least 10 m, in addition to geothermal gradients of 13.46 to 33.66 ºC /km are the ideal conditions for the efficacy of storage. Comparison of the derived reservoir and seal properties such as porosity, permeability, thickness and depth with the minimum recommended site selection criteria shows that the reservoirs are potential candidates for carbon geosequestration with a total theoretical storage capacity of 147MM tons.

An empirical investigation of the impact of global energy transition on Nigerian oil and gas exports

18 months embargo on the thesis and check appendix for copy right materials

Analyses and projections of the historic patterns of U.S. domestic supply of crude oil, natural gas, and natural gas liquids; a study

Cover title.

Determinants of capital expenditures: Evidence from oil and mining sectors in Russia

This master’s thesis investigates the significant macroeconomic and firm level determinants of CAPEX in Russian oil and mining sectors. It also studies the Russian oil and mining sectors, its development, characteristics and current situation. The panel data methodology was implemented to identify the determinants of CAPEX in Russian oil and mining sectors and to test derived hypotheses. The core sample consists of annual financial data of 45 publicly listed Russian oil and mining sector companies. The timeframe of the thesis research is a six year period from 2007 to 2013. The findings of the master’s thesis have shown that Gross Sales, Return On Assets, Free Cash Flow and Long Term Debt are firm level performance variables along with Russian GDP, Export, Urals and the Reserve Fund are macroeconomic variables that determine the magnitude of new capital expenditures reported by publicly listed Russian oil and mining sector companies. These results are not controversial to the previous research paper, indeed they confirm them. Furthermore, the findings from the emerging countries, such as Malaysia, India and Portugal, are analogous to Russia. The empirical research is edifying and novel. Findings from this master’s thesis are highly valuable for the scientific community, especially, for researchers who investigate the determinant of CAPEX in developing countries. Moreover, the results can be utilized as a cogent argument, when companies and investors are doing strategic decisions, considering the Russian oil and mining sectors.

A study of methods used to analyze total oil and polycyclic aromatic hydrocarbons in produced water: steps towards the validation of molecularly imprinted polymers for use in marine environmetns

Produced water is a by-product of offshore oil and gas production, and is released in large volumes when platforms are actively processing crude oil. Some pollutants are not typically removed by conventional oil/water separation methods and are discharged with produced water. Oil and grease can be found dispersed in produced water in the form of tiny droplets, and polycyclic aromatic hydrocarbons (PAHs) are commonly found dissolved in produced water. Both can have acute and chronic toxic effects in marine environments even at low exposure levels. The analysis of the dissolved and dispersed phases are a priority, but effort is required to meet the necessary detection limits. There are several methods for the analysis of produced water for dispersed oil and dissolved PAHs, all of which have advantages and disadvantages. In this work, EPA Method 1664 and APHA Method 5520 C for the determination of oil and grease will be examined and compared. For the detection of PAHs, EPA Method 525 and PAH MIPs will be compared, and results evaluated. APHA Method 5520 C Partition-Infrared Method is a liquid-liquid extraction procedure with IR determination of oil and grease. For analysis on spiked samples of artificial seawater, extraction efficiency ranged from 85 – 97%. Linearity was achieved in the range of 5 – 500 mg/L. This is a single-wavelength method and is unsuitable for quantification of aromatics and other compounds that lack sp³-hybridized carbon atoms. EPA Method 1664 is the liquid-liquid extraction of oil and grease from water samples followed by gravimetric determination. When distilled water spiked with reference oil was extracted by this procedure, extraction efficiency ranged from 28.4 – 86.2%, and %RSD ranged from 7.68 – 38.0%. EPA Method 525 uses solid phase extraction with analysis by GC-MS, and was performed on distilled water and water from St. John’s Harbour, all spiked with naphthalene, fluorene, phenanthrene, and pyrene. The limits of detection in harbour water were 0.144, 3.82, 0.119, and 0.153 g/L respectively. Linearity was obtained in the range of 0.5-10 g/L, and %RSD ranged from 0.36% (fluorene) to 46% (pyrene). Molecularly imprinted polymers (MIPs) are sorbent materials made selective by polymerizing functional monomers and crosslinkers in the presence of a template molecule, usually the analytes of interest or related compounds. They can adsorb and concentrate PAHs from aqueous environments and are combined with methods of analysis including GC-MS, LC-UV-Vis, and desorption electrospray ionization (DESI)- MS. This work examines MIP-based methods as well as those methods previously mentioned which are currently used by the oil and gas industry and government environmental agencies. MIPs are shown to give results consistent with other methods, and are a low-cost alternative improving ease, throughput, and sensitivity. PAH MIPs were used to determine naphthalene spiked into ASTM artificial seawater, as well as produced water from an offshore oil and gas operation. Linearity was achieved in the range studied (0.5 – 5 mg/L) for both matrices, with R² = 0.936 for seawater and R² = 0.819 for produced water. The %RSD for seawater ranged from 6.58 – 50.5% and for produced water, from 8.19 – 79.6%.

Multiphase Screen Development

This honors thesis research project was the study and development of a compact separation device for the oil and gas industry involving a multiphase cylindrical screen filter. Cylindrical screens can be used for solids removal in multiphase flow in upstream oil and gas applications. This study focused on cylindrical wire-wrap screen test unit design and performance characterization to determine volumetric flow rate and pressure drop correlations. The project goals were met with research, test unit design, CFD modeling, calculations, and physical testing. The comprehensive testing will take place during the summer of 2013 and is planned to consist of building the designed flowloop and housing and using high capacity pumps to achieve higher flow rates. Multiphase testing will be performed with water, air, and sand particles and flow and pressure effects will be evaluated for solids filtering over time.

Analysis of the emissions of volatile organic compounds from the compression ignition engine fueled by diesel-biodiesel blend and diesel oil using gas chromatography

This paper describes the procedures of the analysis Of Pollutant gases, as volatile organic compounds (benzene, toluene, ethylbenzene, o-xylene, m-xylene and p-xylene) emitted by engines, using high-resolution gas chromatography (HRGC). In a broad sense, CI engine burning diesel was compared with B10 and a drastic reduction was observed in the emissions of the aromatic compounds by using B10. Especially for benzene, the reduction of concentrations occurs on the level of about 19.5%. Although a concentration value below 1 mu g ml(-1) has been obtained, this reduction is extremely significant since benzene is a carcinogenic compound. (c) 2008 Elsevier Ltd. All rights reserved.

Storm prediction research and its application to the oil/gas industry

The accurate prediction of storms is vital to the oil and gas sector for the management of their operations. An overview of research exploring the prediction of storms by ensemble prediction systems is presented and its application to the oil and gas sector is discussed. The analysis method used requires larger amounts of data storage and computer processing time than other more conventional analysis methods. To overcome these difficulties eScience techniques have been utilised. These techniques potentially have applications to the oil and gas sector to help incorporate environmental data into their information systems