938 resultados para Underflow diameter
Resumo:
The objective was to determine the relationship among the diameter of ovarian follicles, ovulation rate, and gene expression of the LH receptor (LHR) in Nelore cattle. In Experiment 1, ovulation was synchronized in 53 Nelore cows. Three days after ovulation, ovaries were assessed with ultrasonography, all cows were given 6.25 mg LH im, and they were allocated into three groups, according to diameter of their largest ovarian follicle: G1 (7.0-8.0 mm); G2 (8.1-9.0 mm); and G3 (9.1-10.0 mm). For these three groups, ovulation rates were 9, 36, and 90%, respectively, (P < 0.03; each rate differed significantly from the other two). In Experiment 2, granulosa and theca cells were subjected to total RNA extraction, and gene expression of the LHR was determined by RT-PCR. Follicles were allocated in three groups based on their diameter (similar to the Experiment 1), which were denoted Groups A, B, and C. Expression of the LHR gene in granulosa cells was lower in Group A than Group C (P < 0.05). However, there were no significant differences among groups in expression of the LHR gene in theca cells. We concluded that ovulatory capacity in Nelore cattle was related to increased follicular diameter and expression of the LHR gene in granulosa cells. (C) 2012 Elsevier B.V. All rights reserved.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
The morphological characteristics of Synbranchus marmoratus female germ cells in various development stages were described in details; then measurements of ovarian follicle diameters were taken from primary and secondary growth as during these development stages the oocyte size varied considerably along the fish growth. The results were correlated to total fish length, using the individuals division in six size classes. It was possible to group oocytes by stages according to histological characteristics but not according to morphometric diameter, as there was a wide variation in diameter in each stage and overlap between different maturation stages. These data make available new information on the reproductive biology of Synbranchidae. (c) 2004 Published by Elsevier Ltd.
Resumo:
OBJECTIVE: To assess the effect of transient and sustained variations in cardiac load on the values of the end-systolic pressure-diameter relation (ESPDR) of the left ventricle. METHODS: We studied 13 dogs under general anesthesia and autonomic blockade. Variations of cardiac loads were done by elevation of blood pressure by mechanical constriction of the aorta. Two protocols were used in each animal: gradual peaking and decreasing pressure variation, the transient arterial hypertension protocol (TAH), and a quick and 10 min sustained elevation, the sustained arterial hypertension protocol(SAH). Then, we compared the ESDR in these two situations. RESULTS: Acute elevation of arterial pressure, being it transitory or sustained, did not alter the heart frequency and increased similarly the preload and after load. However, they acted differently in end systolic pressure-diameter relation. It was greater in the SAH than TAH protocol, 21.0±7.3mmHg/mm vs. 9.2±1.2mmHg/mm (p<0.05). CONCLUSION: The left ventricular ESPDR values determined during sustained pressure elevations were higher than those found during transient pressure elevations. The time-dependent activation of myocardial contractility associated with the Frank-Starling mechanism is the major factor in inotropic stimulation during sustained elevations of blood pressure, determining an increase in the ESPDR values.
Resumo:
The objectives of the present study were to evaluate factors associated with estrous synchronization responses and pregnancy per insemination (P/AI) in Bos indicus beef cows submitted to progesterone-based fixed-time artificial insemination (FTAI) protocols. A total of 2388 cows (1869 Nellore and 519 crossbred Nellore x Angus) from 10 commercial farms were evaluated to determine the relationships among breed, body condition score (BCS) on the first day of the FTAI protocol, the occurrence of estrus between progesterone device removal and FTAI and diameter of largest ovarian follicle (LF) at FTAI on estrous synchronization responses and P/AI. Cows (n=412 primiparous; 1976 multiparous) received an intravaginal device containing progesterone or an ear implant containing norgestomet (a progestin), and an injection of estradiol at the beginning of the estrous synchronization protocol. Body condition was scored using a 1-5 scale on the first day of the FTAI protocol and at 30-60 days postpartum. Females received 300IU of equine chorionic gonadotropin (eCG) and PGF(2 alpha) on the day the progesterone device/implant was removed and were inseminated 48-60h later. At insemination, cows (n=2388) were submitted to an ultrasonographic exam to determine the diameter of the LF. Follicles were classified into four categories based on mean and standard deviation (SD) of the LF (LF1 = two SD below the mean; LF2 = mean minus one SD; LF3 = mean plus one SD; LF4 = two SD above the mean). Ovulation rate was determined in a subset of cows (n=813) by three consecutive ultrasonographic exams: (1) at time of progesterone device/implant removal, (2) at time of FTAI and (3) 48 h after FTAI. Ovulation was defined as the disappearance of a large follicle (>= 8.0 mm) that was previously recorded. Estrus was determined in a subset of the cows (n = 445) by the activation of a detection of estrous patch placed on the tail head on the day of progesterone device/implant removal. Pregnancy was diagnosed 30 days after FTAI. Pregnancy was influenced (P = 0.001) by follicle diameter [LF1 = 27.5% (81/295), LF2 = 46.6% (328/705), LF3 = 57.9% (647/1118), LF4 = 63.3% (171/270)] and the occurrence of estrus [estrus = 67.7% (174/257) and no estrus = 36.2% (68/188)]. Follicle diameter at FTAI influenced ovulation rate [LF1 = 42.5% (34/80), LF2 = 73.9% (161/218), LF3 = 95.8% (407/425), LF4 = 97.8% (88/90)], the occurrence of estrus [LF1 = 54.8% (51/93), LF2 = 33.6% (43/128), LF3 = 68.9% (126/183), LF4 = 90.2% (37/41)] and P/AI among cows that had ovulations [LF1 =32.4% (11/34), LF2 = 50.3% (81/161), LF3 = 60.0% (244/407), LF4 = 68.2% (60/88)]. Improving estrous responses between progesterone device withdrawal and FTAI and increasing the diameter of the LF at FTAI may be important aspects to achieve improved estrous synchronization responses and P/AI following progesterone/progestin and estradiol based FTAI protocols in suckled Bos indicus cows. (C) 2010 Elsevier B.V. All rights reserved.
Resumo:
Objective - To determine effects of reducing the diameter of the left ventricle of dogs by plication of the left ventricular free wall. Animals - 8 healthy adult mixed-breed dogs. Procedure - Left lateral thoracotomy and a T-shaped pericardiotomy were performed. The free wall of the left ventricle was imbricated with 3 interrupted transfixing sutures applied in a horizontal mattress pattern, using 3-0 polypropylene suture assembled on a straight cutting needle. Surgeons were careful to avoid the coronary vessels. Echocardiography was performed 24 hours before and 48 hours after surgery. Electrocardiography was performed before and 1, 2, 7, 15, 21, 30, and 60 days after surgery. Results - Echocardiographic measurements revealed that the diameter of the left ventricle was reduced by a mean of 23.5%. Electrocardiography revealed ventricular premature complexes 24 hours after surgery that regressed without treatment during the first week after surgery. Conclusions and Clinical Relevance - Plication of the left ventricular free wall of dogs can reduce end-diastolic and end-systolic dimensions of the left ventricle. The technique is simple and does not require cardiopulmonary bypass. According to Laplace's law, the reduction of cardiac diameter leads to reduction on free-wall tension and may improve left ventricular function in dilatated hearts. Thus, additional studies involving dogs with dilated cardiomyopathy should be conducted.
Resumo:
Negative effects of soil compaction have been recognized as one of the problems restricting the root system and consequently impairing yields, especially in the Southern Coastal Plain of the USA. Simulations of the root restricting layers in green house studies are necessary for the development of mechanism which alleviates soil compaction problems in these soils. The selection of three distinct bulk densities based on the standard proctor test is also an important factor to determine which bulk density restricts the root layer. The experiment was conducted to assess the root length density and root diameter of the corn (Zea mays L.) crop as a function of bulk density and water stress, characterized by the soil density (1.2; 1.4, and 1.6 g cm -3), and two levels of the water content, approximately (70 and 90% field capacity). The statistical design adopted was completely randomized design, with four replicates in a factorial pattern of (3 × 2). The PVC tubes were superimposed with an internal diameter of 20 cm with a height of 40 cm (the upper tube 20 cm, compacted and inferior tube 10 cm), the hardpan with different levels of soil compaction were located between 20 and 30 cm of the depth of the pot. Results showed that: the main effects of subsoil mechanical impedance were observed on the top layer indicating that the plants had to penetrate beyond the favorable soil conditions before root growth was affected from 3.16; 2.41 to 1.37 cm cm -3 (P<0.005). There was a significant difference at the hardpan layer for the two levels of water and 90% field capacity reduced the root growth from 0.91 to 0.60 cm cm -3 (P<0.005). The root length density and root diameter were affected by increasing soil bulk density from 1.2 to 1.6 g cm -3 which caused penetration resistance to increase to 1.4 MPa. Soil water content of 70% field capacity furnished better root growth in all the layers studied. The increase in root length density resulted in increased root volume. It can also be concluded that the effect of soil compaction impaired the root diameter mostly at the hardpan layer. Soil temperature had detrimental effect on the root growth mostly with higher bulk densities.
Resumo:
PURPOSE
Resumo:
Aim: Compare the effect of three post designs on the fracture resistance and failure modes of composite core-fiber post-crownless tooth sets. Materials and Methods: Ninety bovine incisors were selected and divided into nine groups of 10 specimens. The teeth were assigned to three groups based on the post design: Cylindrical, tapered, and double-tapered. Each group was subdivided into three subgroups in accordance with the diameter of the post: Small (No.1), medium (No.2), and large (No.3). The Panavia F system was used for post cementation. The specimens were mounted in acrylic resin blocks with a layer of silicone rubber covering the roots. A universal testing machine compressively loaded the specimens from the palatal side at a crosshead speed of 1 mm/min and at an angle of 135I to the long axis of the teeth, until failure occurred. The failure mode was determined by a stereomicroscope inspection of all the specimens. Data were analyzed by one-way ANOVA and the Tukey test (P < 0.05). Results: The fracture resistance was affected by the type of post (P < 0.0001). A narrower diameter for all of the post systems allowed for higher resistance. The main failure mode in the large cylindrical group was catastrophic fractures, while the main failures in the other eight groups were favorable. Conclusion: Narrower diameter posts showed higher fracture resistance. The dominant failure pattern was repairable fracture, except for those with large cylindrical groups.