Grand Trunk Railway way bills, 1900

The Grand Trunk Railway initially ran from Montreal to Toronto, then with expansion of Canada operated to British Columbia, linking major cities together. In 1900, two way bill forms were completed; one for the Niagara Falls Wine Co. and the other for T.G. Bright & Co. Both companies were headquartered in Niagara Falls, Ont. The consignors were John Mayberry & Co. and John Eleareys?.

La crise du syndicalisme comme crise de la représentation des travailleurs : une étude de cas de l'évolution des identités collectives dans l'économie solidaire au Brésil.

Cette thèse part du postulat que la crise du syndicalisme résulte d’une remise en cause des identités collectives ayant légitimé jusque dans les années 70 leur représentation des travailleurs. En témoignent les mobilisations, qui se déroulent souvent en dehors des syndicats et de façon conflictuelle avec eux, de travailleuses et travailleurs longtemps minorés par les arrangements institutionnels prévalant avec la société salariale. Différents travaux dans le renouveau syndical relèvent de leur côté que les syndicats peinent à prendre en compte les besoins et aspirations de ces travailleurs car leur identité collective les entraîne à rester dans les sentiers des orientations et représentations institutionnalisées. Cependant, les auteurs se focalisent sur la façon dont le syndicalisme, et en particulier les leaders, peuvent reconstruire une représentation des travailleurs, et non sur la façon dont les identités collectives se transforment. Les études sur le syndicalisme héritent d’un débat sur les mouvements sociaux qui a abouti à scinder les approches théoriques entre celles conceptualisant les identités collectives, mais dans le cadre de théorisations contestables de l’évolution des sociétés, et celles qui sous-théorisent les identités collectives et considèrent que les mouvements sociaux émergent des processus politique et de la mobilisation des ressources. Les travaux sur le renouveau syndical reprennent généralement cette seconde approche et assimilent les mouvements de travailleurs à des organisations en considérant, implicitement, les buts de l’action collective comme donné. Or, un mouvement social est un concept ; il n’est pas réductible à une organisation, au risque sinon de perdre sa valeur heuristique, qui est de chercher à saisir les identités collectives en conflit et les stratégies associées. À partir de l’étude du cas du mouvement de travailleurs dans l’économie solidaire brésilienne, cette thèse questionne donc le « pourquoi de nouvelles identités collectives de travailleurs émergent » et le « comment ou le pourquoi des identités syndicales se transforment ou se reproduisent », lorsqu’elles sont confrontées à l’émergence de nouvelles façons de définir les dominations à combattre et les orientations. Les identités collectives sont opérationnalisées comme des matrices cognitives et normatives, ce qui permet de rendre compte de leur caractère évolutif en fonction des modalités d’interaction. L’étude de cas met en évidence que les mobilisations autonomes des travailleurs minorés sont porteuses de nouvelles définitions des problèmes et de pratiques sociales transformatrices, qui entrent en conflit avec les significations et les pratiques syndicales institutionnalisées. Elle montre que c’est à la suite d’interactions délibératives entre ces travailleurs et les syndicalistes que les identités syndicales se transforment. Cependant, la reconstitution des trajectoires de deux syndicats (de la principale centrale brésilienne) indique que le fait d’entrer dans de telles interactions ne dépend pas d’une décision rationnelle, mais de la perception (de la part des syndicats) des capacités des travailleurs à transformer le rapport au travail et au monde lorsqu’ils agissent collectivement. Un dernier résultat, corollaire, tient dans la falsification de l’hypothèse – défendue par une partie de la littérature sur le renouveau syndical – selon laquelle les syndicats, et en particulier les leaders, peuvent conduire une transformation de la représentation collective en procédant eux-mêmes à une agrégation des multiples identités collectives. Cette hypothèse, qui revient à considérer le but de l’action collective comme donné, est contredite par les données : elles montrent que, dans un tel cas, s’il y a bien des innovations institutionnelles conduites par le syndicat, ces innovations favorisent l’adaptation du syndicalisme aux mutations du capitalisme et non la transformation des rapports sociaux de domination, parce que prédominent alors les liens sociaux avec les groupes dominants, c’est-à-dire les interprétations cognitives dominantes des problèmes.

Interactions between grain size and composition of sediments: two examples

Two contrasting case studies of sediment and detrital mineral composition are investigated in order to outline interactions between chemical composition and grain size. Modern glacial sediments exhibit a strong dependence of the two parameters due to the preferential enrichment of mafic minerals, especially biotite, in the fine-grained fractions. On the other hand, the composition of detrital heavy minerals (here: rutile) appears to be not systematically related to grain-size, but is strongly controlled by location, i.e. the petrology of the source rocks of detrital grains. This supports the use of rutile as a well-suited tracer mineral for provenance studies. The results further suggest that (i) interpretations derived from whole-rock sediment geochemistry should be flanked by grain-size observations, and (ii) a more sound statistical evaluation of these interactions require the development of new tailor-made statistical tools to deal with such so-called two-way compositions

Brazil’s electorate : still polarised but in a new way

Back in November, we wrote about an analysis of tweets in Brazil that illustrated the extreme polarisation of the country’s voters on the eve of the presidential election on October 26. A striking image (seen in miniature on the left) generated by Marco Aurélio Ruediger and colleagues at the Fundação Getúlio Vargas, an educational institution in Rio de Janeiro, showed voters on each side of the two-way race talking exclusively among themselves and almost never to each other.

Comparison between two methods for cardiac output measurement in propofol-anesthetized dogs: thermodilution and Doppler

ObjectiveTo compare cardiac output (CO) measured by Doppler echocardiography and thermodilution techniques in spontaneously breathing dogs during continuous infusion of propofol. To do so, CO was obtained using the thermodilution method (CO(TD)) and Doppler evaluation of pulmonary flow (CO(DP)) and aortic flow (CO(DA)).Study designProspective cohort study.AnimalsEight adult dogs weighing 8.3 +/- 2.0 kg.MethodsPropofol was used for induction (7.5 +/- 1.9 mg kg-1 IV) followed by a continuous rate infusion at 0.7 mg kg-1 minute-1. The animals were positioned in left lateral recumbency on an echocardiography table that allowed for positioning of the transducer at the 3rd and 5th intercostal spaces of the left hemithorax for Doppler evaluation of pulmonary and aortic valves, respectively. CO(DP) and CO(DA) were calculated from pulmonary and aortic velocity spectra, respectively. A pulmonary artery catheter was inserted via the jugular vein and positioned inside the lumen of the pulmonary artery in order to evaluate CO(TD). The first measurement of CO(TD), CO(DP) and CO(DA) was performed 30 minutes after beginning continuous infusion (T0) and then at 15-minute intervals (T15, T30, T45 and T60). Numeric data were submitted to two-way anova for repeated measurements, Pearson's correlation coefficient and Bland & Altman analysis. Data are presented as mean +/- SD.ResultsAt T0, CO(TD) was lower than CO(DA). CO(DA) was higher than CO(TD) and CO(DP) at T30, T45 and T60. The difference between the CO(TD) and CO(DP), when all data were included, was -0.04 +/- 0.22 L minute-1 and Pearson's correlation coefficient (r) was 0.86. The difference between the CO(TD) and CO(DA) was -0.87 +/- 0.54 L minute-1 and r = 0.69. For CO(TD) and CO(DP), the difference was -0.82 +/- 0.59 L minute-1 and r = 0.61.ConclusionDoppler evaluation of pulmonary flow was a clinically acceptable method for assessing the CO in propofol-anesthetized dogs.

Pulp response after application of two resin modified glass ionomer cements (RMGICs) in deep cavities of prepared human teeth

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Nd:YAG Laser Irradiation of Etched/Unetched Dentin Through an Uncured Two-step Etch-and-Rinse Adhesive and its Effect on Microtensile Bond Strength

Purpose: To evaluate whether Nd:YAG laser irradiation of etched and unetched dentin through an uncured adhesive affected the microtensile bond strength (pTBS).Materials and Methods: Flat dentin surfaces were created in 19 extracted human third molars. Adper Single Bond (SB) adhesive was applied over etched (groups 1 to 3) or unetched dentin (groups 4 to 6). The dentin was then irradiated with a Nd:YAG laser through the uncured adhesive, using 0.75 or 1 W power settings, except for the control groups (groups 1 and 4). The adhesive was light cured and composite crowns were built up. After 24 h, the teeth were sectioned into beams, with cross-sectional areas of 0.49 mm(2), and were stressed under tension. Data were statistically analyzed using two-way ANOVA and Tukey's test (alpha = 5%). Dentin surfaces of fractured specimens and the interfaces of untested beams were observed under scanning electron microscopy (SEM).Results: Acid etching, laser irradiation, and their interaction significantly affected bonding (p < 0.05). Laser irradiation did not improve bonding of etched dentin to resin (p > 0.05). However, higher pTBS means were found on unetched lased dentin (groups 5 and 6), but only in comparison to group 4, where neither lasing nor etching was performed. Groups 4 to 6 showed the lowest pTBS means among all groups tested (p < 0.05). Laser irradiation did not change the characteristics of the hybrid layers created, while solidification globules were observed on lased dentin surfaces under SEM.Conclusion: Laser irradiation of dentin through the uncured adhesive did not significantly improve the pTBS in comparison to the suggested manufacturer's technique.

Effect of microwave disinfection procedures on torsional bond strengths of two hard chairside denture reline materials

Purpose: This study evaluated the potential effects of denture base resin water storage time and an effective denture disinfection method (microwave irradiation at 650 W for 6 minutes) on the torsional bond strength between two hard chairside reline resins (GC Reline and New Truliner) and one heat-polymerizing denture base acrylic resin (Lucitone 199). Materials and Methods: Cylindrical (30 x 3.9 mm) denture base specimens (n = 160) were stored in water at 37°C (2 or 30 days) before bonding. A section (3.0 mm) was removed from the center of the specimens, surfaces prepared, and the reline materials packed into the space. After polymerization, specimens were divided into four groups (n = 10): Group 1 (G1) - tests performed after bonding; Group 2 (G2) - specimens immersed in water (200 ml) and irradiated twice (650 W for 6 minutes); Group 3 (G3) - specimens irradiated daily until seven cycles of disinfection; Group 4 (G4) - specimens immersed in water (37°C) for 7 days. Specimens were submitted to a torsional test (0.1 Nm/min), and the torsional strengths (MPa) and the mode of failure were recorded. Data from each reline material were analyzed by a two-way analysis of variance, followed by Neuman-Keuls test (p = 0.05). Results: For both Lucitone 199 water storage periods, before bonding to GC Reline resin, the mean torsional strengths of G2 (2 days - 138 MPa; 30 days - 132 MPa), G3 (2 days - 126 MPa; 30 days - 130 MPa), and G4 (2 days - 130 MPa; 30 days - 137 MPa) were significantly higher (p < 0.05) than G1 (2 days - 108 MPa; 30 days - 115 MPa). Similar results were found for Lucitone 199 specimens bonded to New Truliner resin, with G1 specimens (2 days - 73 MPa; 30 days - 71 MPa) exhibiting significantly lower mean torsional bond strength (p < 0.05) than G2 (2 day - 86 MPa; 30 days - 90 MPa), G3 (2 days - 82 MPa; 30 days - 82 MPa), and G4 specimens (2 days - 78 MPa; 30 days - 79 MPa). The adhesion of both materials was not affected by water storage time of Lucitone 199 (p > 0.05). GC reline showed a mixed mode of failure (adhesive/cohesive) and New Truliner failed adhesively. Conclusions: Up to seven microwave disinfection cycles did not decrease the torsional bond strengths between the hard reline resins, GC Reline and New Truliner to the denture base resin Lucitone 199. The effect of additional disinfection cycles on reline material may be clinically significant and requires further study. Copyright © 2006 by The American College of Prosthodontists.

Economic reforms, growth and employment: labour markets in Latin America and the Caribbean

Includes bibliography

Investment and economic reform in Latin America

Includes bibliography

A comparison of the film thickness of two adhesive luting agents and the effect of thermocycling on their microTBs to feldspathic ceramic.

The aim of the present study was to evaluate the effect of thermocycling (TC) on the microtensile bond strength (microTBS) of two luting agents to feldspathic ceramic and to measure their film thickness (FT). For the microTBS test, sixteen blocks (6.4 x 6.4 x 4.8 mm) were fabricated using a feldspathic ceramic, etched with 10% hydrofluoric acid, rinsed and treated with the silane agent. The ceramic blocks were divided into two groups (n= 8): Gr1: dual-cured resin cement and Gr2: flowable resin. The luting agents were applied on the treated surfaces. Microsticks (1 +/-0. 1mm2) were prepared and stored under two conditions: dry, specimens immediately submitted to the microTBS test, and TC (6,000 cycles; 5 degrees C-55 degrees C). The microTBS was evaluated using a universal testing machine (1 mm/min). The microTBS data (MPa) were submitted to two-way ANOVA and Tukey' test (5%). For the FT test (ISO 4049), 0.05 ml of each luting agent (n=8) was pressed between two Mylar-covered glass plates (150 N) for 180 seconds and light polymerized. FT was measured using a digital paquimeter (Model 727-2001). The data (mm) were submitted to one-way ANOVA. The luting cement did not influence the microTBS results (p= 0.4467). Higher microtensile bond values were found after TC (20.5 +/- 8.6 MPa) compared to the dry condition (13.9 +/- 4. 7MPa), for both luting agents. The luting agents presented similar film thicknesses: Gr1- 0.052 +/- 0.016 mm; Gr2-0.041 +/- 0.003 mm. The luting agents presented similar film thickness and microTBS values, in dry and TC conditions and TC increased the bond strength regardless of the luting agent.

Forum for East Asia-Latin America Cooperation (FEALAC): new biregional trade and investment relations in a changing world economic environment$c

Includes bibliography

India and Latin America and the Caribbean: opportunities and challenges in trade and investment relations

Includes Bibliography

Trade policy making in Latin America: a compared analysis

Includes bibliography

Trade between Caribbean Community (CARICOM) and Central American Common Market (CACM) countries: the role to play for ports and shipping services

Includes bibliography