An assessment of scup (Stenotomus chrysops) and black sea bass (Centropristas striata) discards in the directed otter trawl fisheries in the Mid-Atlantic Bight

This study was undertaken to re-assess the level of scup (Stenotomus chrysops) discards by weight and to evaluate the effect of various codend mesh sizes on the level of scup discards in the winter-trawl scup fishery. Scup discards were high in directed scup tows regardless of codend mesh — typically one to five times the weight of landings. The weight of scup discards in the present study did not differ significantly from that recorded in scup-targeted tows in the NMFS observer database. Most discards were required as such by the 22.86 cm TL (total length) fish-size limit for catches. Mesh sizes ≤12.7 cm, including the current legal mesh size (11.43 cm) did not adequately filter out scup smaller than 22.86 cm. The median length of scup discards was about 19.83 cm TL. Lowering the legal size for scup from 22.86 to 19.83 cm TL would greatly reduce discard mortality. Scup discards were a small fraction (0.4%) of black sea bass (Centropristis striata) landings in blacksea-bass−targeted tows. The black sea bass fishery is currently regulated under the small-mesh fishery gearrestricted area plan in which fishing is prohibited in some areas to reduce scup mortality. Our study found no evidence to support the efficacy of this management approach. The expectations that discarding would increase disproportionately as the trip limit (limit [in kilograms] on catch for a species) was reached towards the end of the trip and that discards would increase when the trip limit was reduced from 4536 kg to 454 kg at the end of the directed fishing season were not supported. Trip limits did not significantly affect discard mortality.

Fishery-independent Bottom Trawl Surveys for Deep-water Fishes and Invertebrates of the U.S. Gulf of Mexico, 2002–08

From 2002 through 2008, the Mississippi Laboratories of the NMFS Southeast Fisheries Science Center, NOAA, conducted fishery-independent bottom trawl surveys for continental shelf and outer-continental shelf deep-water fishes and invertebrates of the U.S. Gulf of Mexico (50–500 m bottom depths). Five-hundred and ninety species were captured at 797 bottom trawl locations. Standardized survey gear and randomly selected survey sites have facilitated development of a fishery-independent time series that characterizes species diversity, distributions, and catch per unit effort. The fishery-independent surveys provide synoptic descriptions of deep-water fauna potentially impacted by various anthropogenic factors.

Skimmer Trawl Fishery Catch Evaluations in Coastal Louisiana, 2004 and 2005

Fishery observers collected data from 307 tows during 96 trips aboard skimmer trawl vessels in Louisiana’s coastal waters from September 2004 through June 2005 to estimate catch rates of target and nontarget species, including sea turtles (Cheloniidae and Dermochelyidae), by area and season during commercial shrimping operations. About 16,965.7 kg of total catch were recorded during 517.0 hours of fishing operations. Based on weight extrapolations from species composition samples, penaeid shrimp (Penaeidae) dominated the catch at 66%, followed by finfish at 19%, nonpenaeid shrimp crustaceans at 7%, discarded penaeid shrimp at 6%, and debris at 3%. Noncrustacean invertebrates comprised less than 1%. Catch rates in kilograms per hour by category was 21.6 for penaeid shrimp, 6.2 for finfish, 2.2 for nonpenaeid crustaceans, 1.8 for discarded penaeid shrimp, and 0.9 for debris. White shrimp, Litopenaeus setiferus, other penaeid shrimp, and Gulf menhaden, Brevoortia patronus, were the top three dominant species by weight. Seasonally, a higher catch rate was observed from May through August 2005 for penaeid shrimp as compared with the September through December 2004 period. Conversely, the September through December 2004 period experienced a higher catch rate for finfish than during May through August 2005. No sea turtle interactions were documented.

Reducing Prawn-trawl Bycatch in Australia: An Overview and an Example from Queensland

Prawn trawling occurs in most states of Australia in tropical, subtropical, and temperate waters. Bycatch occurs to some degree in all Australian trawl fisheries, and there is pressure to reduce the levels of trawl fishery bycatch. This paper gives a brief overview of the bycatch issues and technological solutions that have been evaluated or adopted in Australian prawn-trawl fi sheries. Turtle excluder devices (TED’s) and bycatch reduction devices (BRD’s) are the principal solutions to bycatch in Australian prawn-trawl fisheries. This paper focuses on a major prawn-trawl fishery of northeastern Australia, and the results of commercial use of TED’s and BRD’s in the Queensland east coast trawl fishery are presented. New industry designs are described, and the status of TED and BRD adoption and regulation is summarized. The implementation of technological solutions to reduce fishery bycatch is assumed generally to assist prawn-trawl fisheries within Australia in achieving legislative requirements for minimal environmental impact and ecological sustainable development.

Effects of Gear Modifications on the Trawl Performance and Catching Efficiency of the West Coast Upper Continental Slope Groundfish Survey Trawl

Since 1984, annual bottom trawl surveys of the west coast (California–Washington) upper continental slope (WCUCS) have provided information on the abundance, distribution, and biological characteristics of groundfish resources. Slope species of the deep-water complex (DWC) are of particular importance and include Dover sole, Microstomus pacificus; sablefish, Anoplopoma fimbria; shortspine thornyhead, Sebastolobus alascanus; and longspine thornyhead, S. altivelis. In the fall of 1994, we conducted an experimental gear research cruise in lieu of our normal survey because of concerns about the performance of the survey trawl. The experiment was conducted on a soft mud bottom at depths of 460–490 m off the central Oregon coast. Treatments included different combinations of door-bridle rigging, groundgear weight, and scope length. The experimental design was a 2 ´ 2 ´ 2 factorial within a randomized complete-block. Analysis of variance was used to examine the effects of gear modifications on the engineering performance of the trawl (i.e. trawl dimensions, variation in trawl dimensions, and door attitude) and to determine if catch rates in terms of weight and number of DWC species and invertebrates were affected by the gear modifications. Trawl performance was highly variable for the historically used standard trawl configuration. Improvements were observed with the addition of either a 2-bridle door or lighter ground gear. Changes in scope length had relatively little effect on trawl performance. The interaction of door bridle and ground gear weight had the most effect on trawl performance. In spite of the standard trawl’s erratic performance, catch rates of all four DWC species and invertebrates were not significantly different than the 2-bridle/heavy combination, which did the best in terms of engineering performance. The most important factor affecting DWC catch rates was ground gear. Scope length and the type of door bridle had little effect on DWC catch rates. Subsequent revisions to survey gear and towing protocol and their impact on the continuity of the slope survey time series are discussed.

Trawling Operations and South African (Cape) Fur Seals, Arctocephalus pusillus pusillus

South African (Cape) fur seals, Arctocephalus pusillus pusillus, interact with the South African trawl fisheries-offshore demersal, inshore demersal, and midwater fisheries. These interactions take thef ollowing forms: Seals take or damage netted fish, on particular vessels they become caught in the propeller, seals drown in the nets, live seals come aboard and may be killed. Except in specific cases of seals damaging particular trawler propellers, interactions result in little cost to the offshore and midwater trawl fisheries. For the inshore fishery, seals damage fish in the net at an estimated cost in excess of R69, 728 (US$18,827) per year, but this is negligible (0.3%) in terms ofthe value of the fishery. Seal mortality is mainly caused by drowning in trawl nets and ranges from 2,524 to 3,636 seals of both sexes per year. Between 312 and 567 seals are deliberately killed annually, but this most likely takes place only when caught and they enter the area below deck, where they are difficult to remove, and pose a potential threat to crew safety. Overall, seal mortality during trawling operations is negligible (0.4-0.6%) in terms of the feeding population of seals in South Africa.

Co-occurrence of bycatch and target species in the groundfish demersal trawl fishery of the U.S. west coast; with special consideration of rebuilding stocks

Bycatch and resultant discard mortality are issues of global concern. The groundfish demersal trawl fishery on the west coast of the United States is a multispecies fishery with significant catch of target and nontarget species. These catches are of particular concern in regard to species that have previously been declared overfished and are currently rebuilding biomass back to target levels. To understand these interactions better, we used data from the West Coast Groundfish Observer Program in a series of cluster analyses to evaluate 3 questions: 1) Are there identifiable associations between species caught in the bottom trawl fishery; 2) Do species that are undergoing population rebuilding toward target biomass levels (“rebuilding species”) cluster with targeted species in a consistent way; 3) Are the relationships between rebuilding bycatch species and target species more resolved at particular spatial scales or are relationships spatially consistent across the whole data set? Two strong species clusters emerged—a deepwater slope cluster and a shelf cluster—neither of which included rebuilding species. The likelihood of encountering rebuilding rockfish species is relatively low. To evaluate whether weak clustering of rebuilding rockfish was attributable to their low rate of occurrence, we specified null models of species occurrence. Results indicated that the ability to predict occurrence of rebuilding rockfish when target species were caught was low. Cluster analyses performed at a variety of spatial scales indicated that the most reliable clustering of rebuilding species was at the spatial scale of individual fishing ports. This finding underscores the value of spatially resolved data for fishery management.

Estimation of bycatch in shrimp trawl fisheries: a comparison of estimation methods using field data and simulated data

Bycatch, or the incidental catch of nontarget organisms during fi shing operations, is a major issue in U.S. shrimp trawl fisheries. Because bycatch is typically discarded at sea, total bycatch is usually estimated by extrapolating from an observed bycatch sample to the entire fleet with either mean-per-unit or ratio estimators. Using both field observations of commercial shrimp trawlers and computer simulations, I compared five methods for generating bycatch estimates that were used in past studies, a mean-per-unit estimator and four forms of the ratio estimator, respectively: 1) the mean fish catch per unit of effort, where unit effort was a proxy for sample size, 2) the mean of the individual fish to shrimp ratios, 3) the ratio of mean fish catch to mean shrimp catch, 4) the mean of the ratios of fish catch per time fished (a variable measure of effort), and 5) the ratio of mean fish catch per mean time fished. For field data, different methods used to estimate bycatch of Atlantic croaker, spot, and weakfish yielded extremely different results, with no discernible pattern in the estimates by method, geographic region, or species. Simulated fishing fleets were used to compare bycatch estimated by the fi ve methods with “actual” (simulated) bycatch. Simulations were conducted by using both normal and delta lognormal distributions of fish and shrimp and employed a range of values for several parameters, including mean catches of fish and shrimp, variability in the catches of fish and shrimp, variability in fishing effort, number of observations, and correlations between fish and shrimp catches. Results indicated that only the mean per unit estimators provided statistically unbiased estimates, while all other methods overestimated bycatch. The mean of the individual fish to shrimp ratios, the method used in the South Atlantic Bight before the 1990s, gave the most biased estimates. Because of the statistically significant two- and 3-way interactions among parameters, it is unlikely that estimates generated by one method can be converted or corrected to estimates made by another method: therefore bycatch estimates obtained with different methods should not be compared directly.

Demersal groundfish densities in trawlable and untrawlable habitats off Washington: implications for the estimation of habitat bias in trawl surveys

Demersal groundfish densities were estimated by conducting a visual strip-transect survey via manned submersible on the continental shelf off Cape Flattery, Washington. The purpose of this study was to evaluate the statistical sampling power of the submersible survey as a tool to discriminate density differences between trawlable and untrawlable habitats. A geophysical map of the study area was prepared with side-scan sonar imagery, multibeam bathymetry data, and known locations of historical NMFS trawl survey events. Submersible transects were completed at randomly selected dive sites located in each habitat type. Significant differences in density between habitats were observed for lingcod (Ophiodon elongatus), yelloweye rockfish (Sebastes ruberrimus), and tiger rockfish (S. nigrocinctus) individually, and for “all rockfish” and “all flatfish” in the aggregate. Flatfish were more than ten times as abundant in the trawlable habitat samples than in the untrawlable samples, whereas rockfish as a group were over three times as abundant in the untrawlable habitat samples. Guidelines for sample sizes and implications for the estimation of the continental shelf trawl-survey habitat-bias are considered. We demonstrate an approach that can be used to establish sample size guidelines for future work by illustrating the interplay between statistical sampling power and 1) habitat specific-density differences, 2) variance of density differences, and 3) the proportion of untrawlable area in a habitat.

Does the size of subsamples taken from multispecies trawl catches affect estimates of catch composition and abundance?

Although subsampling is a common method for describing the composition of large and diverse trawl catches, the accuracy of these techniques is often unknown. We determined the sampling errors generated from estimating the percentage of the total number of species recorded in catches, as well as the abundance of each species, at each increase in the proportion of the sorted catch. We completely partitioned twenty prawn trawl catches from tropical northern Australia into subsamples of about 10 kg each. All subsamples were then sorted, and species numbers recorded. Catch weights ranged from 71 to 445 kg, and the number of fish species in trawls ranged from 60 to 138, and invertebrate species from 18 to 63. Almost 70% of the species recorded in catches were “rare” in subsamples (less than one individual per 10 kg subsample or less than one in every 389 individuals). A matrix was used to show the increase in the total number of species that were recorded in each catch as the percentage of the sorted catch increased. Simulation modelling showed that sorting small subsamples (about 10% of catch weights) identified about 50% of the total number of species caught in a trawl. Larger subsamples (50% of catch weight on average) identified about 80% of the total species caught in a trawl. The accuracy of estimating the abundance of each species also increased with increasing subsample size. For the “rare” species, sampling error was around 80% after sorting 10% of catch weight and was just less than 50% after 40% of catch weight had been sorted. For the “abundant” species (five or more individuals per 10 kg subsample or five or more in every 389 individuals), sampling error was around 25% after sorting 10% of catch weight, but was reduced to around 10% after 40% of catch weight had been sorted.

General features and productivity of the Wadge Bank trawl fishery

For several years one of the world's few successful tropical trawl fisheries has been carried on off the southern tip of India. Much of it has been under the auspices of the Government of Ceylon. Records covering the entire history of the fishery are remarkably complete and those of the last ten years are unusually detailed. The purpose of this paper is to summarize these records and relate them to information from other sources in such a way as to illustrate the principal features of the fishery and permit comparisons with other fisheries. This should provide a sound basis for clear thinking about the industry's present problems and prospects. This is important because the fishery is expanding.

Stray current corrosion of copper sheathing and keel cooling pipe of a 36' trawler

The results of investigations into the cause of an accelerated corrosion of copper sheathing and keel cooling pipe of a 36' wooden trawler are reported. The corrosion is attributed to the stray electric currents originating from the electrical wiring system. The sources of stray currents and the remedial measures have been suggested.