Development of a retrospective job exposure matrix for PCB-exposed workers in capacitor manufacturing

Objectives: Polychlorinated biphenyls (PCBs) are considered probable human carcinogens by the International Agency for Research on Cancer and one congener, PCB126, has been rated as a known human carcinogen. A period-specific job exposure matrix (JEM) was developed for former PCB-exposed capacitor manufacturing workers (n=12,605) (1938-1977). Methods: A detailed exposure assessment for this plant was based on a number of exposure determinants (proximity, degree of contact with PCBs, temperature, ventilation, process control, job mobility). The intensity and frequency of PCB exposures by job for both inhalation and dermal exposures, and additional chemical exposures were reviewed. The JEM was developed in nine steps: (1) all unique jobs (n=1,684) were assessed using (2) defined PCB exposure determinants; (3) the exposure determinants were used to develop exposure profiles; (4) similar exposure profiles were combined into categories having similar PCB exposures; (5) qualitative intensity (high-medium-low-baseline) and frequency (continuous-intermittent) ratings were developed, and (6) used to qualitatively rate inhalation and dermal exposure separately for each category; (7) quantitative intensity ratings based on available air concentrations were developed for inhalation and dermal exposures based on equal importance of both routes of exposure; (8) adjustments were made for overall exposure, and (9) for each category the product of intensity and frequency was calculated, and exposure in the earlier era was weighted. Results: A period-specific JEM modified for two eras of stable PCB exposure conditions. Conclusions: These exposure estimates, derived from a systematic and rigorous use of the exposure determinant data, lead to cumulative PCB exposure-response relationships in the epidemiological cancer mortality and incidence studies of this cohort. [Authors]

The wage effect of an indexation clause: Evidence from Spanish manufacturing firms

An endogenous switching model of ex-ante wage changes under indexed and non-indexed settlements is estimated for the Spanish manufacturing sector using collective bargaining firm data for the 1984-1991 period. The likelihood of indexing the settlement is higher for nationwide unions than for other union groups within the works council and increases with the expected level of inflation. For wage change equations, a common structure for indexed and non-indexed settlements is strongly rejected, showing a source of nominal rigidity. For indexed contracts, the expected ex-ante total inflation coverage is nearly complete. It is also shown that workers pay a significant ex-ante wage change premium (differential) to obtain a cost of living allowance clause. However, the realised contingent compensation exceeds such a premium for all industries. Finally, important spillover effects in wage setting and the decision to index the settlement have been detected.

Complementarity between technology make and buy in innovation strategies: Evidence from Belgiam manufacturing firms

This paper characterizes the innovation strategy of manufacturing firms andexamines the relation between the innovation strategy and importantindustry-, firm- and innovation-specific characteristics using Belgiandata from the Eurostat Community Innovation Survey. In addition to importantsize effects explaining innovation, we find that high perceived risks andcosts and low appropriability of innovations do not discourage innovation,but rather determine how the innovation sourcing strategy is chosen. Withrespect to the determinants of the decision of the innovative firm toproduce technology itself (Make) or to source technology externally (Buy),we find that small firms are more likely restrict their innovation strategyto an exclusive make or buy strategy, while large firms are more likely tocombine both internal and external knowledge acquisition in their innovationstrategy. An interesting result that highlights the complementary nature ofthe Make and Buy decisions, is that, controlled for firm size, companies forwhich internal information is an important source for innovation are morelikely to combine internal and external sources of technology. We find thisto be evidence of the fact that in-house R&D generates the necessaryabsorptive capacity to profit from external knowledge acquisition. Also theeffectiveness of different mechanisms to appropriate the benefits ofinnovations and the internal organizational resistance against change areimportant determinants of the firm's technology sourcing strategy.

Mortality among 24,865 workers exposed to polychlorinated biphenyls (PCBs) in three electrical capacitor manufacturing plants: a ten-year update.

The objective of this analysis was to evaluate mortality among a cohort of 24,865 capacitor-manufacturing workers exposed to polychlorinated biphenyls (PCBs) at plants in Indiana, Massachusetts, and New York and followed for mortality through 2008. Cumulative PCB exposure was estimated using plant-specific job-exposure matrices. External comparisons to US and state-specific populations used standardized mortality ratios, adjusted for gender, race, age and calendar year. Among long-term workers employed 3 months or longer, within-cohort comparisons used standardized rate ratios and multivariable Poisson regression modeling. Through 2008, more than one million person-years at risk and 8749 deaths were accrued. Among long-term employees, all-cause and all-cancer mortality were not elevated; of the a priori outcomes assessed only melanoma mortality was elevated. Mortality was elevated for some outcomes of a priori interest among subgroups of long-term workers: all cancer, intestinal cancer and amyotrophic lateral sclerosis (women); melanoma (men); melanoma and brain and nervous system cancer (Indiana plant); and melanoma and multiple myeloma (New York plant). Standardized rates of stomach and uterine cancer and multiple myeloma mortality increased with estimated cumulative PCB exposure. Poisson regression modeling showed significant associations with estimated cumulative PCB exposure for prostate and stomach cancer mortality. For other outcomes of a priori interest--rectal, liver, ovarian, breast, and thyroid cancer, non-Hodgkin lymphoma, Alzheimer disease, and Parkinson disease--neither elevated mortality nor positive associations with PCB exposure were observed. Associations between estimated cumulative PCB exposure and stomach, uterine, and prostate cancer and myeloma mortality confirmed our previous positive findings.

Public infrastructure and the performance of manufacturing industries: short-and long-run

We present a theoretical framework for determining the short- and long-run effects of infrastructure. While the short-run effects have been the focus of most previous studies, here we derive long-run elasticities by taking into account the adjustment of quasi-fixed inputs to their optimum levels. By considering the impact of infrastructure on private investment decisions, we observe how, apart from the direct effect on costs in the short-run, infrastructure exerts an indirect source of influence in the long-run through their effect on private capital. The model is applied to manufacturing industries in the Spanish regions

Public infrastructure and the performance of manufacturing industries: short-and long-run

We present a theoretical framework for determining the short- and long-run effects of infrastructure. While the short-run effects have been the focus of most previous studies, here we derive long-run elasticities by taking into account the adjustment of quasi-fixed inputs to their optimum levels. By considering the impact of infrastructure on private investment decisions, we observe how, apart from the direct effect on costs in the short-run, infrastructure exerts an indirect source of influence in the long-run through their effect on private capital. The model is applied to manufacturing industries in the Spanish regions

Geographical determinants of the creation of manufacturing firms: The regions of Spain

La complexitat dels mecanismes que determinen l'entrada i la sortida de signatures augmenta quan diferències geogràfiques de l'estructura de producció, la capital humana i l'atur són considerades. Variacions interregionals en la tarifa de les noves de signatures dintre de cada activitat industrial persisteixen durant els períodes llargs de temps, una circumstància que indica que hi ha determinants no-conjunturals en la capacitat de regions per a crear nous projectes industrials. Aquest estudi està preocupat amb l'establiment d'influència variables geogràfiques sobre la fundació de nous establiments de la fabricació. Les indústries (NEIX la R 25) en les regions espanyoles (el BOIG 2) han estat preses com les unitats d'anàlisis per al període 1980-1992

Geographical determinants of the creation of manufacturing firms: The regions of Spain

La complexitat dels mecanismes que determinen l'entrada i la sortida de signatures augmenta quan diferències geogràfiques de l'estructura de producció, la capital humana i l'atur són considerades. Variacions interregionals en la tarifa de les noves de signatures dintre de cada activitat industrial persisteixen durant els períodes llargs de temps, una circumstància que indica que hi ha determinants no-conjunturals en la capacitat de regions per a crear nous projectes industrials. Aquest estudi està preocupat amb l'establiment d'influència variables geogràfiques sobre la fundació de nous establiments de la fabricació. Les indústries (NEIX la R 25) en les regions espanyoles (el BOIG 2) han estat preses com les unitats d'anàlisis per al període 1980-1992

Production Flow Analysis - cases from manufacturing and service industry

Production flow analysis (PFA) is a well-established methodology used for transforming traditional functional layout into product-oriented layout. The method uses part routings to find natural clusters of workstations forming production cells able to complete parts and components swiftly with simplified material flow. Once implemented, the scheduling system is based on period batch control aiming to establish fixed planning, production and delivery cycles for the whole production unit. PFA is traditionally applied to job-shops with functional layouts, and after reorganization within groups lead times reduce, quality improves and motivation among personnel improves. Several papers have documented this, yet no research has studied its application to service operations management. This paper aims to show that PFA can well be applied not only to job-shop and assembly operations, but also to back-office and service processes with real cases. The cases clearly show that PFA reduces non-value adding operations, introduces flow by evening out bottlenecks and diminishes process variability, all of which contribute to efficient operations management.

The Impact of Cooperation on R&D, Innovation andProductivity: an Analysis of Spanish Manufacturing and Services Firms

This paper investigates relationships between cooperation, R&D, innovation and productivity in Spanish firms. It uses a large sample of firm-level micro-data and applies an extended structural model that aims to explain the effects of cooperation on R&D investment, of R&D investment on output innovation, and of innovation on firms’ productivity levels. It also analyses the determinants of R&D cooperation. Firms’ technology level is taken into account in order to analyse the differences between high-tech and low-tech firms, both in the industrial and service sectors. The database used was the Technological Innovation Panel (PITEC) for the period 2004-2010. Empirical results show that firms which cooperate in innovative activities are more likely to invest in R&D in subsequent years. As expected, R&D investment has a positive impact on the probability of generating an innovation, in terms of both product and process, for manufacturing firms. Finally, innovation output has a positive impact on firms’ productivity, being greater in process innovations.

The Impact of Cooperation on R&D, Innovation and Productivity: an Analysis of Spanish Manufacturing and Services Firms

This paper investigates relationships between cooperation, R&D, innovation and productivity in Spanish firms. It uses a large sample of firm-level micro-data and applies an extended structural model that aims to explain the effects of cooperation on R&D investment, of R&D investment on output innovation, and of innovation on firms’ productivity levels. It also analyses the determinants of R&D cooperation. Firms’ technology level is taken into account in order to analyse the differences between high-tech and low-tech firms, both in the industrial and service sectors. The database used was the Technological Innovation Panel (PITEC) for the period 2004-2010. Empirical results show that firms which cooperate in innovative activities are more likely to invest in R&D in subsequent years. As expected, R&D investment has a positive impact on the probability of generating an innovation, in terms of both product and process, for manufacturing firms. Finally, innovation output has a positive impact on firms’ productivity, being greater in process innovations. Keywords: innovation sources; productivity; R&D Cooperation