Tooth loss and implant outcomes in patients refractory to treatment in a periodontal practice

Aim: The aim of this study was to investigate the factors associated with continued significant tooth loss due to periodontal reasons during maintenance following periodontal therapy in a specialist periodontal practice in Norway.
Material and Methods: A case-control design was used. Refractory cases were patients who lost multiple teeth during a maintenance period of 13.4 (range 8-19) years following definitive periodontal treatment in a specialist practice. Controls were age- and gender-matched maintenance patients from the same practice. Characteristics and treatment outcomes were assessed, and all teeth classified as being lost due to periodontal disease during follow-up were identified. The use of implants in refractory cases and any complications relating to such a treatment were recorded.
Results: Only 27 (2.2%) patients who received periodontal treatment between 1986 and 1998 in a specialist practice met the criteria for inclusion in the refractory to treatment group. Each refractory subject lost 10.4 (range 4-16) teeth, which represented 50% of the teeth present at baseline. The rate of tooth loss in the refractory group was 0.78 teeth per year, which was 35 times greater than that in the control group. Multivariate analysis indicated that being in the refractory group was predicted by heavy smoking (p=0.026), being stressed (p=0.016) or having a family history of periodontitis (p=0.002). Implants were placed in 14 of the refractory patients and nine (64%) of these lost at least one implant. In total, 17 (25%) of the implants placed in the refractory group were lost during the study period.
Conclusions: A small number of periodontal maintenance patients are refractive to treatment and go on to experience significant tooth loss. These subjects also have a high level of implant complications and failure. Heavy smoking, stress and a family history of periodontal disease were identified as factors associated with a refractory outcome.

Detecting motor abnormalities in preterm infants

As a consequence of the fragility of various neural structures, preterm infants born at a low gestation and/or birthweight are at an increased risk of developing motor abnormalities. The lack of a reliable means of assessing motor integrity prevents early therapeutic intervention. In this paper, we propose a new method of assessing neonatal motor performance, namely the recording and subsequent analysis of intraoral sucking pressures generated when feeding nutritively. By measuring the infant's control of sucking in terms of a new development of tau theory, normal patterns of intraoral motor control were established for term infants. Using this same measure, the present study revealed irregularities in sucking control of preterm infants. When these findings were compared to a physiotherapist's assessment six months later, the preterm infants who sucked irregularly were found to be delayed in their motor development. Perhaps a goal-directed behaviour such as sucking control that can be measured objectively at a very young age, could be included as part of the neurological assessment of the preterm infant. More accurate classification of a preterm infant's movement abnormalities would allow for early therapeutic interventions to be realised when the infant is still acquiring the most basic of motor functions. (C) Springer-Verlag 2000.

Cardiovascular and metabolic abnormalities in the offspring of diabetic pregnancy

Aims/hypothesis. Maternal fuel metabolism is known to exert long range effects on the later development of children of diabetic mothers. Recently cardiovascular disease in adult life has been linked retrospectively with foetal malnutrition. The aim of this study was to identify whether markers for fuel-related cardiovascular programming exist for the offspring of diabetic pregnancy.

Ocular blood flow analysis detects microvascular abnormalities in impaired glucose tolerance.

Objective: Waveform analysis has been used to assess vascular resistance and predict cardiovascular events. We aimed to identify microvascular abnormalities in patients with impaired glucose tolerance (IGT) using ocular waveform analysis. The effects of pioglitazone were also assessed. Methods: Forty patients with IGT and twenty-four controls were studied. Doppler velocity recordings were obtained from the central retinal, ophthalmic and common carotid arteries, and sampled at 200 Hz. A discrete wavelet-based analysis method was employed to quantify waveforms. The resistive index (RI),was also determined. Patients with IGT were randomised to pioglitazone or placebo and measurements repeated after 12 weeks treatment. Results: In the ocular waveforms, significant differences in power spectra were observed in frequency band four (corresponding to frequencies between 6.25 and 12.50 Hz) between groups (p

Local delivery of chlorhexidine using a tooth-bonded delivery system

Films containing 20% w/w chlorhexidine base (particle size 63-125 mu m) in poly(epsilon-caprolactone), MW 35 000-45 000, were prepared by solvent evaporation and sections attached to the mesio-lingual and mesio-buccal surfaces of the lower first molar in healthy volunteers. Saliva (

Liver abnormalities associated with celiac sprue. How common are they, what is their significance, and what do we do about them?

We prospectively measured serum alkaline phosphatase (ALP), aspartate and alanine transaminase (AST/ALT), and tested sera for antinuclear, smooth-muscle, and antimitochondrial antibodies (ANA, SMA, AMA) in our patients with celiac sprue to determine the prevalence of associated liver abnormalities and its relevance to clinical management. Of 129 patients, ALP was the only elevated enzyme in 12 (9%) and in most cases was not thought to reflect significant liver disease. Seventeen (13%) had elevated AST and/or ALT with normal ALP. Levels normalized in 15 patients after dietary gluten exclusion and remained elevated in 2 noncompliers. Two patients (2%) with elevated AST, ALT, and ALP underwent further investigation: one had negative autoantibodies, liver biopsy, and endoscopic retrograde cholangiography and the other had ANA-positive chronic active hepatitis; enzymes in both cases improved with a gluten-free diet. There was no significant association between elevated AST/ALT and positive ANA/SMA; no patient had AMA. Abnormalities in liver enzymes are common in celiac sprue, but usually respond to dietary gluten exclusion. We propose that there is no need for invasive liver investigation in these patients unless there is more specific evidence of primary liver disease or failure of dietary response.

Genetic renal abnormalities

Inherited disorders of renal structure and function are relatively common causes of end-stage renal disease requiring renal replacement therapy. A family history of haematuria, urinary tract infection or renal failure can alert the clinician to the possible diagnosis of underlying renal genetic abnormalities. In practice, the commonest inherited renal disorder is autosomal dominant polycystic kidney disease (ADPKD), characterized by multiple kidney cysts associated with hypertension and renal failure. Insights into the cell biology of ADPKD are informing new therapeutic approaches to limit cyst growth and prevent progressive renal failure. Non-visible haematuria is a clinical finding that presents a diagnostic challenge because it has so many possible causes. Mutations in the genes encoding collagen proteins within the glomerular basement membrane (GBM) can disrupt its normal barrier function. Thin basement membrane nephropathy, caused by GBM collagen gene mutations, is a relatively common cause of familial haematuria that normally has a good long-term prognosis. Alport syndrome is a rare and genetically heterogeneous condition leading to renal failure in men inheriting the X-linked gene defect. Single-gene defects may cause diverse renal tubular disorders, such as predisposition to renal calculi, diabetes insipidus, renal tubular acidosis or hypertension with associated electrolyte imbalance. Gene mutations responsible for familial renal cancer syndromes, such as tuberous sclerosis complex and von Hippel–Lindau disease, have also been identified

Structural brain abnormalities in male schizophrenics reflect fronto-temporal dissociation

Background. Many studies have separately reported abnormalities of frontal and temporal lobe structures in schizophrenia, but little is known of structural fronto-temporal associations in this condition. We investigated whether male patients with chronic schizophrenia would show abnormal patterns of correlation between regional brain volumes.

Methods. Structural magnetic resonance images of the brain in 42 patients were compared with 43 matched unaffected controls. We explored the pattern of association between regional brain volumes by correlational analyses, and non-parametrically tested for significance of between-group differences by randomization.

Results. The schizophrenics demonstrated significant volume deficits in several brain regions (left temporal lobe and hippocampus, right dorsolateral prefrontal cortex), and significant volume increases in the ventricular system (third ventricle and left temporal horn of the lateral ventricle). Controls demonstrated large positive correlations (r > 0.4) between prefrontal and temporal lobe regions. By contrast, inter-regional correlations significantly reduced in schizophrenics included those between prefrontal, anterior cingulate and temporal regions, and between posterior cingulate and hippocampus (P < 0.05). The most salient abnormality in patients was a dissociation between prefrontal and superior temporal gyrus volumes (P < 0.01).

Conclusions. These results support the existence of a relative 'fronto-temporal dissociation' in schizophrenia which we suggest may be due to lack of mutually trophic influences during frontal and temporal lobe development.

Fracture strength of machined ceramic crowns as a function of tooth preparation design and the elastic modulus of the cement

Objectives: To determine, by means of static fracture testing the effect of the tooth preparation design and the elastic modulus of the cement on the structural integrity of the cemented machined ceramic crown-tooth complex. 
Methods: Human maxillary extracted premolar teeth were prepared for all-ceramic crowns using two preparation designs; a standard preparation in accordance with established protocols and a novel design with a flat occlusal design. All-ceramic feldspathic (Vita MK II) crowns were milled for all the preparations using a CAD/CAM system (CEREC-3). The machined all-ceramic crowns were resin bonded to the tooth structure using one of three cements with different elastic moduli: Super-Bond C&B, Rely X Unicem and Panavia F 2.0. The specimens were subjected to compressive force through a 4 mm diameter steel ball at a crosshead speed of 1 mm/min using a universal test machine (Loyds Instrument Model LRX.). The load at the fracture point was recorded for each specimen in Newtons (N). These values were compared to a control group of unprepared/unrestored teeth. 
Results: There was a significant difference between the control group, with higher fracture strength, and the cemented samples regardless of the occlusal design and the type of resin cement. There was no significant difference in mean fracture load between the two designs of occlusal preparation using Super-Bond C&B. For the Rely X Unicem and Panavia F 2.0 cements, the proposed preparation design with a flat occlusal morphology provides a system with increased fracture strength. 
Significance: The proposed novel flat design showed less dependency on the resin cement selection in relation to the fracture strength of the restored tooth. The choice of the cement resin, with respect to its modulus of elasticity, is more important in the anatomic design than in the flat design. © 2013 Academy of Dental Materials.

Effect of the crown design and interface lute parameters on the stress-state of a machined crown-tooth system: A finite element analysis

The effect of preparation design and the physical properties of the interface lute on the restored machined ceramic crown-tooth complex are poorly understood. The aim of this work was to determine, by means of three-dimensional finite element analysis (3D FEA) the effect of the tooth preparation design and the elastic modulus of the cement on the stress state of the cemented machined ceramic crown-tooth complex. The three-dimensional structure of human premolar teeth, restored with adhesively cemented machined ceramic crowns, was digitized with a micro-CT scanner. An accurate, high resolution, digital replica model of a restored tooth was created. Two preparation designs, with different occlusal morphologies, were modeled with cements of 3 different elastic moduli. Interactive medical image processing software (mimics and professional CAD modeling software) was used to create sophisticated digital models that included the supporting structures; periodontal ligament and alveolar bone. The generated models were imported into an FEA software program (hypermesh version 10.0, Altair Engineering Inc.) with all degrees of freedom constrained at the outer surface of the supporting cortical bone of the crown-tooth complex. Five different elastic moduli values were given to the adhesive cement interface 1.8 GPa, 4 GPa, 8 GPa, 18.3 GPa and 40 GPa; the four lower values are representative of currently used cementing lutes and 40 GPa is set as an extreme high value. The stress distribution under simulated applied loads was determined. The preparation design demonstrated an effect on the stress state of the restored tooth system. The cement elastic modulus affected the stress state in the cement and dentin structures but not in the crown, the pulp, the periodontal ligament or the cancellous and cortical bone. The results of this study suggest that both the choice of the preparation design and the cement elastic modulus can affect the stress state within the restored crown-tooth complex.