984 resultados para Tire Shear Force.
Resumo:
A padronização da textura é um dos principais problemas relacionados à qualidade da carne bovina. Por isso, a avaliação objetiva da maciez, por métodos mecânicos, vem sendo estudada há muitos anos. Para que a avaliação instrumental da textura seja uma ferramenta efetiva nos estudos envolvendo a maciez da carne, é necessário minimizar as causas de variação envolvidas na análise. Atualmente, a força de cisalhamento Warner-Bratzler é o método mais amplamente empregado para essa finalidade. O protocolo padrão dessa técnica analítica preconiza a utilização de uma lâmina de cisalhamento de 1,016mm de espessura. Neste trabalho, foram comparados dados de textura de carne bovina obtidos com a lâmina de cisalhamento padrão Warner-Bratzler, de 1,016mm de espessura, e uma lâmina mais grossa, de 3,05mm de espessura. Após o abate, amostras de músculo Longissimus dorsi, semelhantes em relação aos teores de umidade, lipídeos e proteínas, foram submetidas a duas diferentes temperaturas de resfriamento, atingindo diferentes velocidades de queda de temperatura e, consequentemente, diferentes graus de contração do tecido muscular, o que foi confirmado pela determinação do comprimento dos sarcômeros. Os resultados demonstraram uma maior sensibilidade da lâmina padrão Warner-Bratzler na detecção de variações da textura da carne, em função da velocidade de resfriamento.
Resumo:
O objetivo do presente trabalho foi avaliar as características de qualidade: pH, cor, valor R, perda por exsudação, capacidade de retenção e absorção de água, capacidade de emulsificação, perdas por cocção, força de cisalhamento e análise sensorial da carne de matrizes pesadas de descarte de frangos de corte. A carne de peito de matrizes apresentou valores médios do parâmetro pH, valor R, perda por exsudação e valor de L* de 5,70, 1,43, 2,00 e 50,11, respectivamente. Para a capacidade de retenção e absorção de água, perda de peso por cozimento e força de cisalhamento, os valores médios foram de 77, 58, 18% e 4,94kgf cm-2, respectivamente. Na análise sensorial, a carne de matriz apresentou baixa intensidade de maciez (6,9) e menor suculência (3,4) e foi a mais elástica, borrachenta e difícil de deglutir. A carne de matrizes pesadas de descarte apresenta boas características de qualidade tecnológicas que possibilitam sua utilização como matéria-prima para a elaboração de industrializados.
Resumo:
Propôs-se avaliar os parâmetros de qualidade pH, cor, perda de peso por cozimento (PPC) e força de cisalhamento (FC) no músculo Longissimus dorsi (LD) e Semimembranosus (SM) de 13 cordeiros machos e 14 fêmeas Santa Inês puro (SI x SI) e o mesmo número de animais Texel x Santa Inês (T x SI), abatidos com 15, 25, 35 e 45 kg PV. A carcaça foi resfriada por 24 horas a 2ºC, realizando-se, durante este período, as medidas de pH. Retiraram-se os músculos LD e SM para as análises de cor, PPC e FC. Utilizou-se um DIC, fatorial 2x2x4, e as médias foram analisadas pelo Proc GLM do programa estatístico SAS. As medidas de pH foram analisadas em parcela subdividida. A queda do pH no LD e SM foi mais acentuada para os animais mais leves. A carne das fêmeas T x SI apresentou pH final maior que a dos machos e cordeiros SI x SI. A luminosidade diminuiu e a intensidade da cor vermelha elevou-se com o aumento do peso de abate. A carne dos machos e dos cordeiros SI x SI apresentou coloração mais vermelha e menos luminosa no LD e SM. A PPC foi menor na carne dos cordeiros mais pesados; no músculo LD, dos machos houve menor perda de água que nos das fêmeas. Os machos tiveram carne mais dura e, com o aumento do peso de abate, houve diminuição de FC, sendo maior para o T x SI para o músculo LD e Santa Inês puro para o músculo SM.
Resumo:
Com o objetivo de estudar as características qualitativas da carcaça e da carne de bovinos machos não-castrados abatidos aos 13-14 meses de idade, foram utilizados 16 animais, oito Aberdeen Angus (AA) e oito Hereford (HE), alimentados na fase de terminação com dietas formuladas com dois níveis de energia digestível (ED), o menor 3,07 Mcal/kg de ED (12% de concentrado) e o maior 3,18 Mcal/kg de ED (32% de concentrado). Os animais foram confinados a partir dos 9 meses de idade com peso médio de 220,31 kg e foram abatidos quando, por estimativa, o peso da carcaça atingiu, no mínimo, 190 kg. O delineamento experimental foi o inteiramente casualizado, com quatro tratamentos, em esquema fatorial 2 x 2 (duas raças vs dois níveis de energia). A carne dos animais HE perdeu menos líquido durante os processos de descongelamento e cocção. Além disso, apresentou maior maciez pelo painel de avaliadores e pelo aparelho Shear Force. As carcaças dos animais que receberam o maior nível de energia na dieta apresentaram maior proporção de músculo e, durante o processo de descongelamento, perdeu menos líquido (2,54 vs 7,22%). Quando avaliada pelo aparelho Shear Force, a carne dos animais alimentados com maior nível de energia na dieta mostrou-se mais macia. Verificou-se interação significativa raça ´ nível de energia para o sabor e a coloração da carne, de modo que a carne dos animais AA, alimentados com menor nível de energia, mostrou-se mais saborosa e com melhor coloração.
Resumo:
Com o objetivo de estudar as características qualitativas da carne de ovinos de diferentes categorias quanto aos músculos dos cortes da carcaça (paleta, lombo e perna), utilizaram-se 18 ovinos ½ Ile de France ½ Ideal (seis cordeiros não-castrados, seis ovelhas de descarte e seis machos adultos castrados). Os animais foram criados em pasto de capim-tifton 85 e receberam suplementação (concentrado). Os cordeiros foram abatidos aos 32 kg, com aproximadamente 5 meses de idade, e as ovelhas e os machos adultos castrados, com 55 kg e aos 60 meses de idade. Não houve diferenças nos valores de pH 45 minutos e pH 24 horas entre as categorias animais e nos músculos dos cortes da carcaça. A idade de abate influenciou a luminosidade da carne de todos os músculos. O teor de vermelho não diferiu entre os animais adultos, mas foi superior aos valores obtidos na carne dos cordeiros. A carne de animais adultos é mais escura que a de cordeiros. As perdas por cocção no músculo Triceps brachii são maiores que no Longissimus lumborum e Semimembranosus. Os valores de pH e a capacidade de retenção de água são similares entre as categorias animais.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Buffalo meat production has been arising interest breeder and emerges as alternative to consumer, more and more demanding of the quality products. Thus, this research was conducted to study the chemical composition and tenderness of Longissimus dorsi muscle from 10 non-castrated Murrah buffaloes slaughtered at different weights. The research was carried in feedlot of School of Veterinary Medicine and Animal Science of the São Paulo State University, Botucatu, São Paulo, Brazil. Animals were divided in two groups, received diet ad libitum and slaughtered when reached 450 and 500 kg of live weight. The experiment design was completely randomized, with five repetitions to each treatment. Meat sample from Longissimus dorsi muscle, taken between 12(th) and 13(th) ribs, were carried analysis of moisture, crude protein, fat, ash, Longissimus muscle area (LMA), fat thickness (FT), marbling, calorie and tenderness. It did not have significant difference between the groups. Average values at of 76.0; 20.7; 2.1 and 1.2 of moisture, crude protein, fat and ash respectively, were obtained. Calorie, tenderness, LMA, FT and marbling were obtained at average values of 132 kca1/100g; 3.94 kgf; 34.2 cm(2); 5.9 mm and 2 points, respectively. Values obtained for tenderness are similar in the literature and has been proving that buffalo meat is tender (< 5kgf). Positive correlation was observed between the protein percentage and the shear force of the meat. The buffalo meat is excellent alternative source of red protein of high biological value to feeding of Brazilian consumers.
Resumo:
Forty one young bulls of herds selected for 378 day's weight (W378), born in 1996, were finished on pastures of Panicum Maximum (Jacq.), Panicum Maximum (Jaq) cv. Tanzania 1 and Brachiaria brizantha (Hoschst) Stapf cv. Marandu at the Sertaozinho Experimental Station, São Paulo State, Brazil. The samples, representing the W378 mean for each herd, were composed by 11 Nellore Selection (NeS) and by 10 of each one of the groups Nelore Control (NeC), Guzera Selection (GuS) and Caracu (Ca). The slaughter was carried out when the animals were 824 days older, with a body condition score averaging 7.6, in a 1-9 scale. The minimum and maximum adjusted means for the main traits, including all groups, were: average weight daily gain, 406 (NeC) and 501 g (NeS); slaughter weight (SW), 446.8 (NeC) and 544.3 kg (NeS); carcass weight (CW), 249.8 (NeC) and 309.7 kg (NeS); dressing percentage (DP), 54.0 (GuS) and 56.3% (NeC and NeS). In the 9(th) - 11(th) rib section: muscle, 59.6 (NeC) and 65.2% (Ca); fat, 15.6 (Ca) and 21.4% (NeC); bone, 18.9 (NeC) and 20.2% (GuS); fat thickness (FT), 2.0 (Ca) and 4.2 mm (NeC); loin eye area, 65.6 (NeC) and 71.1 cm(2) (NeS and Ca); Warner-Bratzler shear force (SF), 4.5 (Ca) and 6.6 kg (GuS) and total cooking losses (TCL), 22.5 (NeC) and 24.9% (GuS). The selection for weight promoted higher SW and CW in the NeS group, without changing the DP, the physical composition of the rib, SF and TCL in the meat. However, there was lower FT compared to NeC. The GuS animals had intermediates SW and CW, compared to NeS and Ca and lower DP. The Ca animals presented higher muscle percentage, in the rib section, and also higher meat tenderness compared to the meat of the Zebu animals.
Resumo:
Authors - Magno AFF, Martins RP, Vaz LG, Martins LP Objectives - Evaluate the shear bond strength (SBS) and the adhesive remnant index (ARI) of indirect bonded lingual brackets using xenon plasma arc light, light-emitting diode (LED) and conventional quartz-tungsten-halogen light. Material and Methods - Lingual brackets were bonded indirectly to 60 premolars divided to three groups according to the curing light used: Group 1, plasma arc for 6 s; Group 2, LED for 10 s; and Group 3, halogen light for 40 s. After bonding, the specimens were subjected to a shear force until debonding. The debonding pattern was assessed and classified according to the ARI scores. The mean shear bond strengths were accessed by anova followed by the Student-Newman-Keuls test for multiple comparisons. ARI scores were assessed using the chi-square test. Results - The three groups showed significant differences (p < 0.001), with the averages of group 1 < group 2 < group 3. Groups showed no differences regarding ARI scores. Conclusion - Bonding lingual brackets indirectly with plasma arc, during 60% of the time used for the LED, produced lower SBS than obtained with the latter. Using LED during 25% of the time of the halogen light produced lower SBS than obtained with the latter. These differences did not influence the debonding pattern and are clinically acceptable according to the literature. © 2010 John Wiley & Sons A/S.
Resumo:
The aim of this study was to evaluate the effect of deboning time on broiler breeder hen meat for in natura consumption. Eighty samples of breast fillets with bone (Pectoralis major muscle) were collected and divided into four groups of 20 samples each; each group represented a different post-mortem deboning time: 0 (immediately after cooling), 4, 8 and 12h post-mortem. At 24h post-mortem, all samples were evaluated for the following parameters: pH, color (L*, a* and b*), cooking loss, water retention capacity, shear force, myofibrillar fragmentation index and fiber diameter. Color (L*, a* and b*), cooking loss, water retention capacity and shear force were significantly different (p ≥ 0.05) among the evaluated deboning times. The shear force value of breast fillets deboned at 0h post-mortem (8.478) was significantly different (p ≥ 0.05) from those deboned at 4, 8 and 12h post-mortem (5.154; 5.375 and 4.819, respectively). Therefore, an increase in the tenderness of breast fillets was observed, when deboning was performed at least 4h post-mortem.
Resumo:
This work aimed to evaluate qualitative parameters of meat, sensorial analysis, ivermecin residue and heavy metals from 48 Ile de France lambs submitted to organic and conventional production models which were slaughtered at 32 kg of body weight. Lamb meat from organic model had larger yellowness w to compawithto conventional mo to 45 minutes after the slaught anbut L * and a* parameters were not affeced;, however, not eady the color of lamb meat 24 hours after the slaugter, not influenced by treatments. There was not effect of treatments in pH and temperatureat 45 minutes and 24 hours after the slaughter, in water holding capacity and in shear force, while the cooking losses were influenced by treatments. In the meat of lambs submitted to organic model, the subjective tenderness and the global acceptance were lower when compared to convencional model. Treatments didn't influence arsenic, cadmium and lead meat tenor. Inexistence of ivermectin was verified in meat from organic and conventional production models.
Resumo:
The present study evaluated the effect of the use of natural antioxidants in different spent hens processed meat, the physical-chemical and sensory characteristics of product were analyzed. The experiment was conducted at the Technology Laboratory of Animal Products, Department of Technology - FCAV/Unesp - Campus of Jaboticabal. Forty-five laying hens with approximately 80 weeks of age were used, distributed in a completely randomized experimental design in a 4x4 factorial arrangement, 4 condiment types (control, rosemary, clove and oregano, and the last three natural antioxidants) and 4 storage times (0; 3; 6 and 9 days at 4°C), with sixteen treatments and tree repetitions. It were evaluated the characteristics of humidity, pH, color, cooking loss, shear force, TBARS number and sensory analyze. The averages were obtained by Tukey test 5% of significance. The results showed an interaction between the storage time and condiments types in all analyzed parameters. It was concluded that oregano use decreased the processed meat oxidation, also pleased the judges in sensory analysis. The lowest notes in sensory analysis were obtained with the treatment that contained clove.
Resumo:
Fifty-nine Nellore bulls from low and high residual feed intake (RFI) levels were studied with the objective of evaluating meat quality traits. Animals were slaughtered when ultrasound-measured backfat thickness reached 4. mm, and samples of Longissimus were collected. A mixed model including RFI as fixed effect and herd and diet as random effects was used, and least square means were compared by t-test. More efficient animals consumed 0.730. kg dry matter/day less than less efficient animals, with similar performance. No significant differences in carcass weight, prime meat cuts proportion, chemical composition, pH, sarcomere length, or color were observed between RFI groups. Shear force, myofibrillar fragmentation index and soluble collagen content were influenced by RFI, with a higher shear force and soluble collagen content and a lower fragmentation index in low RFI animals. Feedlot-finished low RFI young Nellore bulls more efficiently convert feed into meat, presenting carcasses within quality standards. © 2012 Elsevier Ltd.
Resumo:
This study was performed to compare CAPN1, CAPN2, CAST, TG, DGAT1 and LEP gene expressions and correlate them with meat quality traits in two genetic groups (Nellore and Canchim) in order to assess their expression profile and use their expression profile as genetic markers. We analyzed 30 young bulls (1. year old), 15 of each genetic group. Samples of the Longissimus dorsi muscle were collected for analysis of: total lipids (TL) and meat tenderness measured as Warner-Bratzler shear force (SF) and myofibrillar fragmentation (MFI) at day of slaughter and 7. days of aging. Gene expression profiles were obtained via RT-qPCR. TL and MFI showed differences between breeds, higher MFI in Canchim and higher TL in Nellore. Calpains showed no differential expression between groups, as did DGAT1, TG, and LEP. CAST was expressed more in the Nellore cattle. The only significant within-breed correlation (0.79) between gene expression and meat traits was found for DGAT1 and MFI in Canchim breed. Although the number of animals used in this study was small, the results indicate that the increased expression of CAST in Nellore may reflect tougher meat, but the lack of correlations with the meat traits indicates it is not a promising genetic marker. © 2013 Elsevier Ltd.