Avaliação oxidativa do biodiesel de pinhão manso em diferentes processos de purificação

The objective of this study was to analyze the oxidative stability of biodiesel from jatropha obtained from different purification processes, three wet processes with different drying (in a vacuum oven, conventional oven and in anhydrous sodium sulfate) and dry (purification with magnesium silicate adsorbent). Raw materials of different qualities (jatropha crop ancient and recent crop) were used. The Jatropha oil was extracted by mechanical extraction and refined. The Jatropha biodiesel was obtained by the transesterification reaction in ethyl route using alkaline catalysis. The biodiesel samples were characterized by analysis of water content, carbon residue, Absorption Spectroscopy in the Infrared Region and Thermogravimetry. Thermogravimetric curves of purified PUsv* PUsq* and had higher initial decomposition temperatures, indicating that the most stable, followed by samples PU* and PUSC*. Besides the sample SP* is a smaller initial temperature, confirming the sample without purification to be less thermally stable. The percentage mass loss of the purified samples showed conversion of about 98.5%. The results of analyzes carbon residue and infrared suggested that contamination by impurities is the main factor for decreased oxidative stability of biodiesel. The oxidative stability was assessed from periodic monitoring, using the techniques of Rancimat, peroxide index, acid value and Pressurized Differential Scanning Calorimetry. Samples of biodiesel from jatropha which showed better oxidative stability were of the best quality raw material and wet scrubbing: PUsq* with dry chemical, using anhydrous sodium sulfate and PUsv* with vacuum drying, which had oxidative stability 6 hours in Rancimat time 0 days, within the limits established by the Technical Regulation No. 4/2012 of the ANP, without the addition of antioxidant, suggesting that these procedures the least influence on the oxidative stability of biodiesel

Mechanism for interplay between electron and ionic fluxes in KhFek[Fe(CN)(6)](l)center dot mH(2)O compounds

This paper develops a framework for the interpretation of ionic insertion/deinsertion reactions in an aqueous environment taking place in transition-metal hexacyanoferrates of the general formula KhFek3+ [Fe2+ (CN)(6)](l)center dot mH(2)O, also called Prussian Blue. Three different processes were fully separated in the electrochemistry of these films. It was clearly identified that one of these electrochemical processes involves the insertion/deinsertion of H3O+ (hydrated protons) through the channels of the KhFek3+ [Fe2+ (CN)(6)](l) center dot mH(2)O structure to reach the film electroneutrality during the electron transfer between Everitt's Salt and Prussian Blue. The other electrochemical processes involve K+ or H+ (proton) exchange through the water crystalline structure existing in the channels of the KhFek3+ [Fe2+(CN)(6)](l)center dot mH(2)O structure.

Multicolor up conversion emission and color tunability in Yb3+/Tm3+/Ho3+ triply doped heavy metal oxide glasses

Multicolor and white light emissions have been achieved in Yb3+, Tm3+ and Ho3+ triply doped heavy metal oxide glasses upon laser excitation at 980 nm. The red (660 nm), green (547 nm) and blue (478 nm) up conversion emissions of the rare earth (RE) ions triply doped TeO2-GeO2-Bi2O3-K2O glass (TGBK) have been investigated as a function of the RE concentration and excitation power of the 980 nm laser diode. The most appropriate combination of RE in the TGBK glass host (1.6 wt% Yb2O3, 0.6 wt% Tm2O3 and 0.1 wt% Ho2O3) has been determined with the purpose to tune the primary colors (RGB) respective emissions and generate white light emission by varying the pump power. The involved infrared to visible up conversion mechanisms mainly consist in a three-photon blue up conversion of Tm3+ ions and a two-photon green and red up conversions of Ho3+ ions. The resulting multicolor emissions have been described according to the CIE-1931 standards. (C) 2011 Elsevier B.V. All rights reserved.

Impact of breed and sex on porcine endocrine transcriptome: a bayesian biometrical analysis

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Macroeconomic volatility and social vulnerability in Brazil: the Cardoso government (1995-2002) and perspectives

Includes bibliography

Nonlinear optical properties of Bi2O3-GeO2 glass at 800 and 532 nm

The nonlinear (NL) optical properties of glassy xBi2O 3-(1-x) GeO2 with x = 0.72 and 0.82 were investigated. The experiments were performed with lasers at 800 nm (pulses of 150 fs) and 532 nm (pulses of 80 ps and 250 ns). Using the Kerr gate technique, we observed that the NL response of the samples at 800 nm is faster than 150 fs. NL refraction indices, | n 2 | ≈ 5 × 10-16 cm2/W, and two-photon absorption coefficients, α 2, smaller than 0.03 cm/GW, were measured at 800 nm. At 532 nm, we measured the NL transmittance of the samples. From the results obtained, we determined α 2 ≈1 cm/GW and excited-state absorption cross-sections of ≈10-22 cm2 due to free-carriers. © 2013 AIP Publishing LLC.

Influence of two different vinification procedures on the physicochemical and sensory properties of Brazilian non-Vitis vinifera red wines

The objective of this study was to evaluate the association between the physicochemical properties and sensory acceptance of Brazilian red wines by applying chemometric techniques. Therefore, three winemaking processes were carried out: a traditional winemaking process and two novel winemaking processes, pre-drying and static pomace. Significant differences could be identified amongst the physicochemical properties of the wines (P<0.001). The sensory results showed greater acceptance of the wines made after pre-drying of the grapes or from the static pomace, as compared to commercial brands. Cluster analysis and Multidimensional Scaling were successfully applied and their results demonstrated the influence of the total phenolic content and color indexes on acceptance of the appearance of the wines. The odor was associated with the alcohol content, acidity, dry extract, total and reducing sugars and the body of the wines. The flavor was associated with several physicochemical properties which influenced the overall acceptance of the samples. © 2013 Elsevier Ltd.

Movendo-se entre a experimentação e a dependência de drogas: o autocontrole do adolescente como componente interveniente

Pós-graduação em Saúde Coletiva - FMB

Experiência interacional homem-processo saúde doença: A saúde inabalável e a materialidade da doença

Pós-graduação em Saúde Coletiva - FMB

Formação de nomes deverbais nas Cantigas de Santa Maria

This research aims to present and discuss three morphophonological processes – juxtaposition, allomorphy of the verbal thematic vowel and gemination of similar vowels – which occurs in word formation involving the suffixes -çon and -mento in a corpus composed of 420 Cantigas de Santa Maria. The cases analyzed in this study occurred with nouns from verbs of the first, second and third conjugations. Through the analysis of these processes we conclude that the suffix -çon triggers more morphophonological processes than the suffix -mento. However, although the processes are very productive, we note that most of the names were formed from the juxtaposition of the suffixes - especially in nouns formed with -mento – which shows a tendency to regularity in the word formation with these suffixes.

Oxygen Interstitial Dynamics in Bi(2)Sr(2)CaCu(2)O(8+delta) Oxides Measured by Mechanical Spectroscopy

Many researchers became interested in the discovery of Bi(2)Sr(2)CaCu(2)O(8+delta) oxides with critical temperature of around 80 K. It is known that the critical temperature is related to the CuO2 planes of the material. For this reason, the study of the interstitial oxygen in these oxides is of great relevance. The samples were prepared by means of conventional solid state reactions, through the stoichiometric mixture of precursory powders. After the sinterization, the samples were submitted to measurements of density, electrical resistivity, x-ray diffraction, scanning electron microscopy and energy dispersion spectroscopy, with the objective of performing their characterization. The measurements of mechanical spectroscopy were performed by a torsion pendulum. The results show three relaxation processes in the temperature range of 200 and 700 K, with activation energy of approximately 0.9 eV, which has been attributed to the dynamics of the interstitial oxygen present in the material.

Cellulose micro/nanofibres from Eucalyptus kraft pulp: Preparation and properties

There is growing interest in cellulose nanofibres from renewable sources for several industrial applications. However, there is a lack of information about one of the most abundant cellulose pulps: bleached Eucalyptus kraft pulp. The objective of the present work was to obtain Eucalyptus cellulose micro/nanofibres by three different processes, namely: refining, sonication and acid hydrolysis of the cellulose pulp. The refining was limited by the low efficiency of isolated nanofibrils, while sonication was more effective for this purpose. However, the latter process occurred at the expense of considerable damage to the cellulose structure. The whiskers obtained by acid hydrolysis resulted in nanostructures with lower diameter and length, and high crystallinity. Increasing hydrolysis reaction time led to narrower and shorter whiskers, but increased the crystallinity index. The present work contributes to the different widespread methods used for the production of micro/nanofibres for different applications. (C) 2012 Elsevier Ltd. All rights reserved.

Noble-metal nanoparticles produced with colloidal lithography: fabrication, optical properties and applications

In this work, metal nanoparticles produced by nanosphere lithography were studied in terms of their optical properties (in connection to their plasmon resonances), their potential application in sensing platforms - for thin layer sensing and bio-recognition events -, and for a particular case (the nanocrescents), for enhanced spectroscopy studies. The general preparation procedures introduced early in 2005 by Shumaker-Parry et al. to produce metallic nanocrescents were extended to give rise to more complex (isolated) structures, and also, by combining colloidal monolayer fabrication and plasma etching techniques, to arrays of them. The fabrication methods presented in this work were extended not only to new shapes or arrangements of particles, but included also a targeted surface tailoring of the substrates and the structures, using different thiol and silane compounds as linkers for further attachment of, i.e. polyelectrolyte layers, which allow for a controlled tailoring of their nanoenvironment. The optical properties of the nanocrescents were studied with conventional transmission spectroscopy; a simple multipole model was adapted to explain their behaviour qualitatively. In terms of applications, the results on thin film sensing using these particles show that the crescents present an interesting mode-dependent sensitivity and spatial extension. Parallel to this, the penetrations depths were modeled with two simplified schemes, obtaining good agreement with theory. The multiple modes of the particles with their characteristic decay lengths and sensitivities represent a major improvement for particle-sensing platforms compared to previous single resonance systems. The nanocrescents were also used to alter the emission properties of fluorophores placed close to them. In this work, green emitting dyes were placed at controlled distances from the structures and excited using a pulsed laser emitting in the near infrared. The fluorescence signal obtained in this manner should be connected to a two-photon processes triggered by these structures; obtaining first insight into plasmon-mediated enhancement phenomena. An even simpler and faster approach to produce plasmonic structures than that for the crescents was tested. Metallic nanodiscs and nanoellipses were produced by means of nanosphere lithography, extending a procedure reported in the literature to new shapes and optical properties. The optical properties of these particles were characterized by extinction spectroscopy and compared to results from the literature. Their major advantage is that they present a polarization-dependent response, like the nanocrescents, but are much simpler to fabricate, and the resonances can be tailored in the visible with relative ease. The sensing capabilities of the metallic nanodiscs were explored in the same manner as for the nanocrescents, meaning their response to thin layers and to bio-recognition events on their surface. The sensitivity of these nanostructures to thin films proved to be lower than that of the crescents, though in the same order of magnitude. Experimental information about the near field extension for the Au nanodiscs of different sizes was also extracted from these measurements. Further resonance-tailoring approaches based on electrochemical deposition of metals on the nanodiscs were explored, as a means of modifying plasmon resonances by changing surface properties of the nanoparticles. First results on these experiments would indicate that the deposition of Ag on Au on a submonolayer coverage level can lead to important blue-shifts in the resonances, which would open a simple way to tailor resonances by changing material properties in a local manner.

Abflusslose Senken – Instrumente in der Landschaftsanalyse und Indikatoren rezenter Krustenbewegungen

Innerhalb des Untersuchungsgebiets Schleswig-Holstein wurden 39.712 topographische Hohlformen detektiert. Genutzt wurden dazu ESRI ArcMap 9.3 und 10.0. Der Datenaufbereitung folgten weitere Kalkulationen in MATLAB R2010b. Jedes Objekt wurde räumlich mit seinen individuellen Eigenschaften verschnitten. Dazu gehörten Fläche, Umfang, Koordinaten (Zentroide), Tiefe und maximale Tiefe der Hohlform und Formfaktoren wie Rundheit, Konvexität und Elongation. Ziel der vorgestellten Methoden war die Beantwortung von drei Fragestellungen: Sind negative Landformen dazu geeignet Landschaftseinheiten und Eisvorstöße zu unterscheiden und zu bestimmen? Existiert eine Kopplung von Depressionen an der rezenten Topographie zu geologischen Tiefenstrukturen? Können Senken unterschiedlicher Entstehung anhand ihrer Formcharakteristik unterteilt werden? Die vorgenommene Klassifikation der großen Landschaftseinheiten basiert auf der Annahme, dass sowohl Jungmoränengebiete, ihre Vorflächen als auch Altmoränengebiete durch charakteristische, abflusslose Hohlformen, wie Toteislöcher, Seen, etc. abgegrenzt werden können. Normalerweise sind solche Depressionen in der Natur eher selten, werden jedoch für ehemalige Glaziallandschaften als typisch erachtet. Ziel war es, die geologischen Haupteinheiten, Eisvorstöße und Moränengebiete der letzten Vereisungen zu differenzieren. Zur Bearbeitung wurde ein Detektionsnetz verwendet, das auf quadratischen Zellen beruht. Die Ergebnisse zeigen, dass durch die alleinige Nutzung von Depressionen zur Klassifizierung von Landschaftseinheiten Gesamtgenauigkeiten von bis zu 71,4% erreicht werden können. Das bedeutet, dass drei von vier Detektionszellen korrekt zugeordnet werden können. Jungmoränen, Altmoränen, periglazialeVorflächen und holozäne Bereiche können mit Hilfe der Hohlformen mit großer Sicherheit voneinander unterschieden und korrekt zugeordnet werden. Dies zeigt, dass für die jeweiligen Einheiten tatsächlich bestimmte Senkenformen typisch sind. Die im ersten Schritt detektierten Senken wurden räumlich mit weiterreichenden geologischen Informationen verschnitten, um zu untersuchen, inwieweit natürliche Depressionen nur glazial entstanden sind oder ob ihre Ausprägung auch mit tiefengeologischen Strukturen in Zusammenhang steht. 25.349 (63,88%) aller Senken sind kleiner als 10.000 m² und liegen in Jungmoränengebieten und können vermutlich auf glaziale und periglaziale Einflüsse zurückgeführt werden. 2.424 Depressionen liegen innerhalb der Gebiete subglazialer Rinnen. 1.529 detektierte Hohlformen liegen innerhalb von Subsidenzgebieten, von denen 1.033 innerhalb der Marschländer im Westen verortet sind. 919 große Strukturen über 1 km Größe entlang der Nordsee sind unter anderem besonders gut mit Kompaktionsbereichen elsterzeitlicher Rinnen zu homologisieren.344 dieser Hohlformen sind zudem mit Tunneltälern im Untergrund assoziiert. Diese Parallelität von Depressionen und den teils über 100 m tiefen Tunneltälern kann auf Sedimentkompaktion zurückgeführt werden. Ein Zusammenhang mit der Zersetzung postglazialen, organischen Materials ist ebenfalls denkbar. Darüber hinaus wurden in einer Distanz von 10 km um die miozän aktiven Flanken des Glückstadt-Grabens negative Landformen detektiert, die Verbindungen zu oberflächennahen Störungsstrukturen zeigen. Dies ist ein Anzeichen für Grabenaktivität während und gegen Ende der Vereisung und während des Holozäns. Viele dieser störungsbezogenen Senken sind auch mit Tunneltälern assoziiert. Entsprechend werden drei zusammenspielende Prozesse identifiziert, die mit der Entstehung der Hohlformen in Verbindung gebracht werden können. Eine mögliche Interpretation ist, dass die östliche Flanke des Glückstadt-Grabens auf die Auflast des elsterzeitlichen Eisschilds reagierte, während sich subglazial zeitgleich Entwässerungsrinnen entlang der Schwächezonen ausbildeten. Diese wurden in den Warmzeiten größtenteils durch Torf und unverfestigte Sedimente verfüllt. Die Gletschervorstöße der späten Weichselzeit aktivierten erneut die Flanken und zusätzlich wurde das Lockermaterial exariert, wodurch große Seen, wie z. B. der Große Plöner See entstanden sind. Insgesamt konnten 29 große Depressionen größer oder gleich 5 km in Schleswig-Holstein identifiziert werden, die zumindest teilweise mit Beckensubsidenz und Aktivität der Grabenflanken verbunden sind, bzw. sogar auf diese zurückgehen.Die letzte Teilstudie befasste sich mit der Differenzierung von Senken nach deren potentieller Genese sowie der Unterscheidung natürlicher von künstlichen Hohlformen. Dazu wurde ein DEM für einen Bereich im Norden Niedersachsens verwendet, das eine Gesamtgröße von 252 km² abdeckt. Die Ergebnisse zeigen, dass glazial entstandene Depressionen gute Rundheitswerte aufweisen und auch Elongation und Exzentrizität eher kompakte Formen anzeigen. Lineare negative Strukturen sind oft Flüsse oder Altarme. Sie können als holozäne Strukturen identifiziert werden. Im Gegensatz zu den potentiell natürlichen Senkenformen sind künstlich geschaffene Depressionen eher eckig oder ungleichmäßig und tendieren meist nicht zu kompakten Formen. Drei Hauptklassen topographischer Depressionen konnten identifiziert und voneinander abgegrenzt werden: Potentiell glaziale Senken (Toteisformen), Flüsse, Seiten- und Altarme sowie künstliche Senken. Die Methode der Senkenklassifikation nach Formparametern ist ein sinnvolles Instrument, um verschiedene Typen unterscheiden zu können und um bei geologischen Fragestellungen künstliche Senken bereits vor der Verarbeitung auszuschließen. Jedoch zeigte sich, dass die Ergebnisse im Wesentlichen von der Auflösung des entsprechenden Höhenmodells abhängen.

Light-by-light scattering and muon’s anomalous magnetic moment

A study of hadron production by photons opens unique ways to address a number of fundamental problems in strong interaction physics as well as fundamental questions in Quantum Field Theory. In particular, an understanding of two-photon processes is of crucial importance for constraining the hadronic uncertainties in precision measurements and in searches for new physics. The process of