Optimal Methodology for Synchronized Scheduling of Parallel Station Assembly with Air Transportation

We present an optimal methodology for synchronized scheduling of production assembly with air transportation to achieve accurate delivery with minimized cost in consumer electronics supply chain (CESC). This problem was motivated by a major PC manufacturer in consumer electronics industry, where it is required to schedule the delivery requirements to meet the customer needs in different parts of South East Asia. The overall problem is decomposed into two sub-problems which consist of an air transportation allocation problem and an assembly scheduling problem. The air transportation allocation problem is formulated as a Linear Programming Problem with earliness tardiness penalties for job orders. For the assembly scheduling problem, it is basically required to sequence the job orders on the assembly stations to minimize their waiting times before they are shipped by flights to their destinations. Hence the second sub-problem is modelled as a scheduling problem with earliness penalties. The earliness penalties are assumed to be independent of the job orders.

Perfiles de mercado de las 22 provincias de China

El presente trabajo investigativo constituye una herramienta de consulta para las personas y organizaciones interesadas en conocer el panorama actual de la situación comercial entre China y Colombia en busca de toma de decisiones acertadas en materia de negocios entre ambas naciones. En él se analizan en detalle cada una de las veintidós provincias de la República Popular China; en cuanto a panorama general; logística aérea, terrestre y marítima; partidas arancelarias y Top 10 de los productos importados por cada una de ellas desde Colombia. Este trabajo está enfocado en el estudio del comercio desde Colombia hacia China, actualizado al año 2012 y busca enseñar los productos líderes de importación, al igual que aquellos productos potenciales; de acuerdo a la información de su valor en dólares, su porcentaje de participación en el total importado y su comportamiento histórico en los últimos tres años. Así mismo se analizan los principales países proveedores de cada provincia y las diferentes partidas arancelarias a profundidad. Finalmente, se espera que el presente trabajo abra las puertas a un nuevo panorama acerca de oportunidades de negocio y alternativas comerciales a productos colombianos en China.

Sensibilidad del cuestionario anamnésico de síntomas de miembro superior y columna desarrollado por la unidad de investigación de ergonómica de postura y movimiento (EPM) desde la perspectiva de la fisioterapia en Colombia

El propósito de este estudio es evaluar la sensibilidad, especificidad y valores predictivos del Cuestionario Anamnésico de Síntomas de Miembro Superior y Columna (CASMSC) desarrollado por la Unidad de Investigación de Ergonomía de Postura y Movimiento (EPM). Se realizó un estudio descriptivo de tipo correlacional, mediante el análisis de datos secundarios de una base de datos con registros de trabajadores de la industria de alimentos (n=401) en el año 2013, a quienes se les había aplicado el CASMSC, así como una evaluación clínica fisioterapéutica enfocada en los mismos segmentos corporales; esta última utilizada como prueba de oro. Para analizar si existían diferencias estadísticas por edad, antigüedad y género se aplicó el análisis de varianza de una vía. La sensibilidad, especificidad y valores predictivos del CASMSC se informan con sus respectivos intervalos de confianza (95%). La prevalencia de umbral positivo para sospecha de Desorden Músculo Esquelético (DME) tanto de miembro superior como de columna se encontró muy por encima de la media nacional para el sector. La sensibilidad del CASMSC para miembro superior estuvo en el rango de un 80% a 94,57% y para columna cervical y lumbar fue de 36,4% y 43,4%, respectivamente. Para la región dorsal fue casi del doble de las otras dos regiones (85,7%). El CASMSC es recomendable en su apartado para miembro superior dado a su alto nivel de sensibilidad.

La Aplicación de estadísticas y de los SIG en el estudio de las construcciones monumentales prehistóricas de la Amazonía brasileña

Las estructuras monumentales prehistóricas construidas mediante zanjas continuas excavadas en el suelo de la Amazonia brasileña, son yacimientos que comprenden varias formas geométricas de diversos tamaños. Actualmente se conocen 291 yacimientos arqueológicos, la mayor parte de los cuales han sido mapeados por medio de imágenes de satélite. Estas construcciones prehistóricas fueron localizadas mediante la combinación de una serie de estrategias de prospección que incluyen el uso de imágenes satélites, sobrevuelos y otras tecnologías que posibilitaron su identificación. En un análisis de caracterización cuantitativa y morfológica y a través da estadísticas, obtuvimos como principales resultados que existe una gran dispersión de los datos correspondientes a su tamaño, siendo menor la variación para la profundidad, el valor medio de las áreas de los recintos con zanjas perimetrales es 17.490,6 m2 , a pesar de que el 40,3% mide menos de una hectárea (10.000 m ), la altitud media a la que se encuentran es de 194,4 metros y ésta es la variable que mejor correlación tiene con la posición geográfica. Con la ayuda de gvSIG, Sextante, GRASS y R, hemos tratado de caracterizar la ubicación de los yacimientos atendiendo a diferentes variables entre las que destacan la altitud relativa, la orientación, la distancia al curso de agua más próximo, la pendiente y la posición relativa en el territorio. La intención es intentar predecir en qué áreas, hoy en día cubiertas por la masa forestal, se pueden encontrar estructuras semejantes a las localizadas en las áreas abiertas. Este carácter predictivo de nuestras observaciones sería de vital importancia para poder definir futuras prospecciones en las áreas boscosas de la Amazonia.Para el futuro, no descartamos el aprovechamiento de datos LIDAR para intentar comprobar si las áreas designadas como potencialmente poseedoras de geoglifos efectivamente los poseen

Antecedentes de la lealtad en los entornos on line y off line: un análisis empírico aplicado al sector de la aviación civil

El objetivo de esta investigación es analizar la lealtad de los usuarios de líneas aéreas tanto en el entorno online como en el entorno offline. La revisión bibliográfica ha identificado tres antecedentes: la satisfacción, la confianza y el valor percibido. Se ha llevado a cabo un estudio empírico realizándose un total de 1710 entrevistas personales en el aeropuerto del Prat (Barcelona) a usuarios de dos compañías aéreas tradicionales, Iberia y British Airways, y a una compañía low cost, Easyjet. Se trata de las tres compañías que operan con vuelos directos Barcelona-Londres. En el análisis de los datos se han utilizado modelos de ecuaciones estructurales y en particular la técnica utilizada fue el análisis factorial confirmatorio. Los resultados revelan que tanto la satisfacción, como la confianza y el valor percibido explican las relaciones de lealtad entre los pasajeros y las compañías aéreas.

The low cost phenomenon

LCC Market Development - In 1996 low cost airlines (LCCs) accounted for only 1.4% of intra-European Union capacity. By the end of 2002, low cost airlines had captured 12% of all intra-EU capacity - Currently LCCs have a 30% market share of scheduled European point-to-point passengers. According to AEA forecasts, the LC market is expected to increase to 43% of European traffic by 2011. - In 2006 140 million passengers were carried by LCCs. - Low-fare airlines have increased their presence from 13% of city pairs in 2003 to 26% in 2007. 96% of new city-pairs between 2005 and 2007 were added by LCCs. - The United Kingdom still sees the highest number of low-cost flights, followed by Spain, which has been making up a lot of ground over the last year. This is followed by Italy and Germany with slightly fewer flights. These four countries contribute to roughly three quarters of low-cost departures. France is fifth in this list with only 5% of LC flights. - easyJet and Ryanair continue to be the biggest players in the European LCC market accounting for about 40% of all LCC capacity. The top two are followed by Airberlin, which contributes another 10% leaving three carriers in control of half the European low-cost market.

Dubai International Airport a historical voyage

Dubai International Airport... a historical voyage - Opened on September 30, 1960 - 1,800 meters of compacted runway - Capacity to handle aircraft the size up to DC-3 - Handled 10,000 passengers and 772 scheduled flights

Patch Scale Nest-Site Selection by Marbled Murrelets (Brachyramphus marmoratus)

The Marbled Murrelet (Brachyramphus marmoratus) is a threatened alcid that nests almost exclusively in old-growth forests along the Pacific coast of North America. Nesting habitat has significant economic importance. Murrelet nests are extremely difficult and costly to find, which adds uncertainty to management and conservation planning. Models based on air photo interpretation of forest cover maps or assessments by low-level helicopter flights are currently used to rank presumed Marbled Murrelet nesting habitat quality in British Columbia. These rankings are assumed to correlate with nest usage and murrelet breeding productivity. Our goal was to find the models that best predict Marbled Murrelet nesting habitat in the ground-accessible portion of the two regions studied. We generated Resource Selection Functions (RSF) using logistic regression models of ground-based forest stand variables gathered at plots around 64 nests, located using radio-telemetry, versus 82 random habitat plots. The RSF scores are proportional to the probability of nests occurring in a forest patch. The best models differed somewhat between the two regions, but include both ground variables at the patch scale (0.2-2.0 ha), such as platform tree density, height and trunk diameter of canopy trees and canopy complexity, and landscape scale variables such as elevation, aspect, and slope. Collecting ground-based habitat selection data would not be cost-effective for widespread use in forestry management; air photo interpretation and low-level aerial surveys are much more efficient methods for ranking habitat suitability on a landscape scale. This study provides one method for ground-truthing the remote methods, an essential step made possible using the numerical RSF scores generated herein.

Flight Paths of Migrating Golden Eagles and the Risk Associated with Wind Energy Development in the Rocky Mountains

In recent years, the eastern foothills of the Rocky Mountains in northeastern British Columbia have received interest as a site of industrial wind energy development but, simultaneously, have been the subject of concern about wind development coinciding with a known migratory corridor of Golden Eagles (Aquila chrysaetos). We tracked and quantified eagle flights that crossed or followed ridgelines slated for one such wind development. We found that hourly passage rates during fall migration peaked at midday and increased by 17% with each 1 km/h increase in wind speed and by 11% with each 1°C increase in temperature. The propensity to cross the ridge tops where turbines would be situated differed between age classes, with juvenile eagles almost twice as likely to traverse the ridge-top area as adults or subadults. During fall migration, Golden Eagles were more likely to cross ridges at turbine heights (risk zone, < 150 m above ground) under headwinds or tailwinds, but this likelihood decreased with increasing temperature. Conversely, during spring migration, eagles were more likely to move within the ridge-top area under eastern crosswinds. Identifying Golden Eagle flight routes and altitudes with respect to major weather systems and local topography in the Rockies may help identify scenarios in which the potential for collisions is greatest at this and other installations.

Chemical composition observed over the mid-Atlantic and the detection of pollution signatures far from source regions

The atmospheric composition of the central North Atlantic region has been sampled using the FAAM BAe146 instrumented aircraft during the Intercontinental Transport of Ozone and Precursors (ITOP) campaign, part of the wider International Consortium for Atmospheric Research on Transport and Transformation (ICARTT). This paper presents an overview of the ITOP campaign. Between late July and early August 2004, twelve flights comprising 72 hours of measurement were made in a region from approximately 20 to 40°W and 33 to 47°N centered on Faial Island, Azores, ranging in altitude from 50 to 9000 m. The vertical profiles of O3 and CO are consistent with previous observations made in this region during 1997 and our knowledge of the seasonal cycles within the region. A cluster analysis technique is used to partition the data set into air mass types with distinct chemical signatures. Six clusters provide a suitable balance between cluster generality and specificity. The clusters are labeled as biomass burning, low level outflow, upper level outflow, moist lower troposphere, marine and upper troposphere. During this summer, boreal forest fire emissions from Alaska and northern Canada were found to provide a major perturbation of tropospheric composition in CO, PAN, organic compounds and aerosol. Anthropogenic influenced air from the continental boundary layer of the USA was clearly observed running above the marine boundary layer right across the mid-Atlantic, retaining high pollution levels in VOCs and sulfate aerosol. Upper level outflow events were found to have far lower sulfate aerosol, resulting from washout on ascent, but much higher PAN associated with the colder temperatures. Lagrangian links with flights of other aircraft over the USA and Europe show that such signatures are maintained many days downwind of emission regions. Some other features of the data set are highlighted, including the strong perturbations to many VOCs and OVOCs in this remote region.

Response of the Asian summer monsoon to a weakening of Atlantic thermohaline circulation

Various paleoclimate records have shown that the Asian monsoon was punctuated by numerous suborbital time-scale events, and these events were coeval with those that happened in the North Atlantic. This study investigates the Asian summer monsoon responses to the Atlantic Ocean forcing by applying an additional freshwater flux into the North Atlantic. The simulated results indicate that the cold North Atlantic and warm South Atlantic induced by the weakened Atlantic thermohaline circulation (THC) due to the freshwater flux lead to significantly suppressed Asian summer monsoon. The authors analyzed the detailed processes of the Atlantic Ocean forcing on the Asian summer monsoon, and found that the atmospheric teleconnection in the eastern and central North Pacific and the atmosphere-ocean interaction in the tropical North Pacific play the most crucial role. Enhanced precipitation in the subtropical North Pacific extends the effects of Atlantic Ocean forcing from the eastern Pacific into the western Pacific, and the atmosphere-ocean interaction in the tropical Pacific and Indian Ocean intensifies the circulation and precipitation anomalies in the Pacific and East Asia.

Use of airborne remote sensing to detect riverside Brassica rapa to aid in risk assessment of transgenic crops

High resolution descriptions of plant distribution have utility for many ecological applications but are especially useful for predictive modelling of gene flow from transgenic crops. Difficulty lies in the extrapolation errors that occur when limited ground survey data are scaled up to the landscape or national level. This problem is epitomized by the wide confidence limits generated in a previous attempt to describe the national abundance of riverside Brassica rapa (a wild relative of cultivated rapeseed) across the United Kingdom. Here, we assess the value of airborne remote sensing to locate B. rapa over large areas and so reduce the need for extrapolation. We describe results from flights over the river Nene in England acquired using Airborne Thematic Mapper (ATM) and Compact Airborne Spectrographic Imager (CASI) imagery, together with ground truth data. It proved possible to detect 97% of flowering B. rapa on the basis of spectral profiles. This included all stands of plants that occupied >2m square (>5 plants), which were detected using single-pixel classification. It also included very small populations (<5 flowering plants, 1-2m square) that generated mixed pixels, which were detected using spectral unmixing. The high detection accuracy for flowering B. rapa was coupled with a rather large false positive rate (43%). The latter could be reduced by using the image detections to target fieldwork to confirm species identity, or by acquiring additional remote sensing data such as laser altimetry or multitemporal imagery.

Reactive Halogens in the Marine Boundary Layer (RHaMBLe): the tropical North Atlantic experiments

The NERC UK SOLAS-funded Reactive Halogens in the Marine Boundary Layer (RHaMBLe) programme comprised three field experiments. This manuscript presents an overview of the measurements made within the two simultaneous remote experiments conducted in the tropical North Atlantic in May and June 2007. Measurements were made from two mobile and one ground-based platforms. The heavily instrumented cruise D319 on the RRS Discovery from Lisbon, Portugal to São Vicente, Cape Verde and back to Falmouth, UK was used to characterise the spatial distribution of boundary layer components likely to play a role in reactive halogen chemistry. Measurements onboard the ARSF Dornier aircraft were used to allow the observations to be interpreted in the context of their vertical distribution and to confirm the interpretation of atmospheric structure in the vicinity of the Cape Verde islands. Long-term ground-based measurements at the Cape Verde Atmospheric Observatory (CVAO) on São Vicente were supplemented by long-term measurements of reactive halogen species and characterisation of additional trace gas and aerosol species during the intensive experimental period. This paper presents a summary of the measurements made within the RHaMBLe remote experiments and discusses them in their meteorological and chemical context as determined from these three platforms and from additional meteorological analyses. Air always arrived at the CVAO from the North East with a range of air mass origins (European, Atlantic and North American continental). Trace gases were present at stable and fairly low concentrations with the exception of a slight increase in some anthropogenic components in air of North American origin, though NOx mixing ratios during this period remained below 20 pptv. Consistency with these air mass classifications is observed in the time series of soluble gas and aerosol composition measurements, with additional identification of periods of slightly elevated dust concentrations consistent with the trajectories passing over the African continent. The CVAO is shown to be broadly representative of the wider North Atlantic marine boundary layer; measurements of NO, O3 and black carbon from the ship are consistent with a clean Northern Hemisphere marine background. Aerosol composition measurements do not indicate elevated organic material associated with clean marine air. Closer to the African coast, black carbon and NO levels start to increase, indicating greater anthropogenic influence. Lower ozone in this region is possibly associated with the increased levels of measured halocarbons, associated with the nutrient rich waters of the Mauritanian upwelling. Bromide and chloride deficits in coarse mode aerosol at both the CVAO and on D319 and the continuous abundance of inorganic gaseous halogen species at CVAO indicate significant reactive cycling of halogens. Aircraft measurements of O3 and CO show that surface measurements are representative of the entire boundary layer in the vicinity both in diurnal variability and absolute levels. Above the inversion layer similar diurnal behaviour in O3 and CO is observed at lower mixing ratios in the air that had originated from south of Cape Verde, possibly from within the ITCZ. ECMWF calculations on two days indicate very different boundary layer depths and aircraft flights over the ship replicate this, giving confidence in the calculated boundary layer depth.

Extraction of tidal channel networks from aerial photographs alone and combined with laser altimetry

Tidal channel networks play an important role in the intertidal zone, exerting substantial control over the hydrodynamics and sediment transport of the region and hence over the evolution of the salt marshes and tidal flats. The study of the morphodynamics of tidal channels is currently an active area of research, and a number of theories have been proposed which require for their validation measurement of channels over extensive areas. Remotely sensed data provide a suitable means for such channel mapping. The paper describes a technique that may be adapted to extract tidal channels from either aerial photographs or LiDAR data separately, or from both types of data used together in a fusion approach. Application of the technique to channel extraction from LiDAR data has been described previously. However, aerial photographs of intertidal zones are much more commonly available than LiDAR data, and most LiDAR flights now involve acquisition of multispectral images to complement the LiDAR data. In view of this, the paper investigates the use of multispectral data for semiautomatic identification of tidal channels, firstly from only aerial photographs or linescanner data, and secondly from fused linescanner and LiDAR data sets. A multi-level, knowledge-based approach is employed. The algorithm based on aerial photography can achieve a useful channel extraction, though may fail to detect some of the smaller channels, partly because the spectral response of parts of the non-channel areas may be similar to that of the channels. The algorithm for channel extraction from fused LiDAR and spectral data gives an increased accuracy, though only slightly higher than that obtained using LiDAR data alone. The results illustrate the difficulty of developing a fully automated method, and justify the semi-automatic approach adopted.