Records relating to American prisoners of war and missing in action from the Vietnam War /

Includes index.

Management audit : Department of Transportation's Aeronautics Operations.

"This is our report of the Management Audit of the Illinois Department of Transportation's aeronautics operations. The audit was conducted pursuant to Legislative Audit Commission Resolution Number 135, which was adopted August 10, 2005. This audit was conducted in accordance with generally accepted government auditing standards and the audit standards promulgated by the Office of the Auditor General at 74 Ill. Adm. Code 420.310. The audit report is transmitted in conformance with Section 3/14 of the Illinois State Auditing Act."--p. i.

The organization and training of joint task forces /

"April 1996."

Voting in the armed forces; report, March 4, 1952.

Mode of access: Internet.

Basic Magnesium Plant, Henderson, Nev. : hearings before a subcommittee of the Committee on Expenditures in the Executive Departments and a subcommittee of the Special Committee to Investigate the National Defense Program, United States Senate, Eightieth Congress, first-[second] session, pursuant to S. Res. 75, a resolution authorizing an investigation of surplus property and its disposal.

Homer Ferguson, chairman of subcommittee.

Organizing for national security : hearings before the Subcommittee on National Policy Machinery of the Committee on Government Operations, United States Senate, Eighty-sixth Congress, second session [-Eighty-seventh Congress, first session] ...

Pts. 2-9 have also special subtitles.

Mining and mineral operations in the Rocky Mountain States : a visitor guide /

"Special publication."

Mining and mineral operations in the New England and Mid-Atlantic States: a visitor guide /

Special publication.

Developing a research framework for understanding the social realities, with special reference to Sri Lankan entrepreneurs

This paper identifies and examines issues of relevance for increasing effectiveness of entrepreneurial management research. These issues emerged from research into entrepreneurial behaviour and underlying motivations in Sri Lanka. Understanding of socially- and culturally-bound social actors, social actions and social outputs in entrepreneurial activity requires context-sensitivity, expressed through cognisance of institutional characteristics, the interface between cultural values and business, and historical and cultural forces which impact on entrepreneurship. We suggest that this requires exploration through bottom-up translations of actions consistent with the beliefs and values of the actors involved, employing qualitative methodology to ground the reality of human behaviour in deep-rooted cultural and social contexts. Thorough interpretation of holistic case studies that are capable of capturing the actors' viewpoints brings appropriate insights to the field of entrepreneurship.

The future of manufacturing

Anyone who looks at the title of this special issue will agree that the intent behind the preparation of this volume was ambitious: to predict and discuss “The Future of Manufacturing”. Will manufacturing be important in the future? Even though some sceptics might say not, and put on the table some old familiar arguments, we would strongly disagree. To bring subsidies for the argument we issued the call-for-papers for this special issue of Journal of Manufacturing Technology Management, fully aware of the size of the challenge in our hands. But we strongly believed that the enterprise would be worthwhile. The point of departure is the ongoing debate concerning the meaning and content of manufacturing. The easily visualised internal activity of using tangible resources to make physical products in factories is no longer a viable way to characterise manufacturing. It is now a more loosely defined concept concerning the organisation and management of open, interdependent, systems for delivering goods and services, tangible and intangible, to diverse types of markets. Interestingly, Wickham Skinner is the most cited author in this special issue of JMTM. He provides the departure point of several articles because his vision and insights have guided and inspired researchers in production and operations management from the late 1960s until today. However, the picture that we draw after looking at the contributions in this special issue is intrinsically distinct, much more dynamic, and complex. Seven articles address the following research themes: 1.new patterns of organisation, where the boundaries of firms become blurred and the role of the firm in the production system as well as that of manufacturing within the firm become contingent; 2.new approaches to strategic decision-making in markets characterised by turbulence and weak signals at the customer interface; 3.new challenges in strategic and operational decisions due to changes in the profile of the workforce; 4.new global players, especially China, modifying the manufacturing landscape; and 5.new techniques, methods and tools that are being made feasible through progress in new technological domains. Of course, many other important dimensions could be studied, but these themes are representative of current changes and future challenges. Three articles look at the first theme: organisational evolution of production and operations in firms and networks. Karlsson's and Skold's article represent one further step in their efforts to characterise “the extraprise”. In the article, they advance the construction of a new framework, based on “the network perspective” by defining the formal elements which compose it and exploring the meaning of different types of relationships. The way in which “actors, resources and activities” are conceptualised extends the existing boundaries of analytical thinking in operations management and open new avenues for research, teaching and practice. The higher level of abstraction, an intrinsic feature of the framework, is associated to the increasing degree of complexity that characterises decisions related to strategy and implementation in the manufacturing and operations area, a feature that is expected to become more and more pervasive as time proceeds. Riis, Johansen, Englyst and Sorensen have also based their article on their previous work, which in this case is on “the interactive firm”. They advance new propositions on strategic roles of manufacturing and discuss why the configuration of strategic manufacturing roles, at the level of the network, will become a key issue and how the indirect strategic roles of manufacturing will become increasingly important. Additionally, by considering that value chains will become value webs, they predict that shifts in strategic manufacturing roles will look like a sequence of moves similar to a game of chess. Then, lastly under the first theme, Fleury and Fleury develop a conceptual framework for the study of production systems in general derived from field research in the telecommunications industry, here considered a prototype of the coming information society and knowledge economy. They propose a new typology of firms which, on certain dimensions, complements the propositions found in the other two articles. Their telecoms-based framework (TbF) comprises six types of companies characterised by distinct profiles of organisational competences, which interact according to specific patterns of relationships, thus creating distinct configurations of production networks. The second theme is addressed by Kyläheiko and SandstroÍm in their article “Strategic options based framework for management of dynamic capabilities in manufacturing firms”. They propose a new approach to strategic decision-making in markets characterised by turbulence and weak signals at the customer interface. Their framework for a manufacturing firm in the digital age leads to active asset selection (strategic investments in both tangible and intangible assets) and efficient orchestrating of the global value net in “thin” intangible asset markets. The framework consists of five steps based on Porter's five-forces model, the resources-based view, complemented by means of the concepts of strategic options and related flexibility issues. Thun, GroÍssler and Miczka's contribution to the third theme brings the human dimension to the debate regarding the future of manufacturing. Their article focuses on the challenges brought to management by the ageing of workers in Germany but, in the arguments that are raised, the future challenges associated to workers and work organisation in every production system become visible and relevant. An interesting point in the approach adopted by the authors is that not only the factual problems and solutions are taken into account but the perception of the managers is brought into the picture. China cannot be absent in the discussion of the future of manufacturing. Therefore, within the fourth theme, Vaidya, Bennett and Liu provide the evidence of the gradual improvement of Chinese companies in the medium and high-tech sectors, by using the revealed comparative advantage (RCA) analysis. The Chinese evolution is shown to be based on capabilities developed through combining international technology transfer and indigenous learning. The main implication for the Western companies is the need to take account of the accelerated rhythm of capability development in China. For other developing countries China's case provides lessons of great importance. Finally, under the fifth theme, Kuehnle's article: “Post mass production paradigm (PMPP) trajectories” provides a futuristic scenario of what is already around us and might become prevalent in the future. It takes a very intensive look at a whole set of dimensions that are affecting manufacturing now, and will influence manufacturing in the future, ranging from the application of ICT to the need for social transparency. In summary, this special issue of JMTM presents a brief, but undisputable, demonstration of the possible richness of manufacturing in the future. Indeed, we could even say that manufacturing has no future if we only stick to the past perspectives. Embracing the new is not easy. The new configurations of production systems, the distributed and complementary roles to be performed by distinct types of companies in diversified networked structures, leveraged by the new emergent technologies and associated the new challenges for managing people, are all themes that are carriers of the future. The Guest Editors of this special issue on the future of manufacturing are strongly convinced that their undertaking has been worthwhile.

The growing importance of inter-company collaboration

Guest editorial: This special issue has been drawn from papers that were published as part of the Second European Conference on Management of Technology (EuroMOT) which was held at Aston Business School (Birmingham, UK) 10-12 September 2006. This was the official European conference for the International Association for Management of Technology (IAMOT); the overall theme of the conference was “Technology and global integration.” There were many high-calibre papers submitted to the conference and published in the associated proceedings (Bennett et al., 2006). The streams of interest that emerged from these submissions were the importance of: technology strategy, innovation, process technologies, managing change, national policies and systems, research and development, supply chain technology, service and operational technology, education and training, small company incubation, technology transfer, virtual operations, technology in developing countries, partnership and alliance, and financing and investment. This special issue focuses upon the streams of interest that accentuate the importance of collaboration between different organisations. Such organisations vary greatly in character; for instance, they may be large or small, publicly or privately owned, and operate in manufacturing or service sectors. Despite these varying characteristics they all have something in common; they all stress the importance of inter-organisational collaboration as a critical success factor for their organisation. In today's global economy it is essential that organisations decide what their core competencies are what those of complementing organisations are. Core competences should be developed to become a bases of differentiation, leverage and competitive advantage, whilst those that are less mature should be outsourced to other organisations that can claim to have had more recognition and success in that particular core competence (Porter, 2001). This strategic trend can be observed throughout advanced economies and is growing strongly. If a posteriori reasoning is applied here it follows that organisations could continue to become more specialised in fewer areas whilst simultaneously becoming more dependent upon other organisations for critical parts of their operations. Such actions seem to fly in the face of rational business strategy and so the question must be asked: why are organisations developing this way? The answer could lie in the recent changes in endogenous and exogenous factors of the organisation; the former emphasising resource-based issues in the short-term, and strategic positioning in the long-term whilst the later emphasises transaction costs in the short-term and acquisition of new skills and knowledge in the long-term. For a harmonious balance of these forces to prevail requires organisations to firstly declare a shared meta-strategy, then to put some cross-organisational processes into place which have their routine operations automated as far as possible. A rolling business plan would review, assess and reposition each organisation within this meta-strategy according to how well they have contributed (Binder and Clegg, 2006). The important common issue here is that an increasing number of businesses today are gaining direct benefit from increasing their levels of inter-organisational collaboration. Such collaboration has largely been possible due to recent technological advances which can make organisational structures more agile (e.g. the extended or the virtual enterprise), organisational infra-structure more connected, and the sharing of real-time information an operational reality. This special issue consists of research papers that have explored the above phenomenon in some way. For instance, the role of government intervention, the use of internet-based technologies, the role of research and development organisations, the changing relationships between start-ups and established firms, the importance of cross-company communities of practice, the practice of networking, the front-loading of large-scale projects, innovation and the probabilistic uncertainties that organisations experience are explored in these papers. The cases cited in these papers are limited as they have a Eurocentric focus. However, it is hoped that readers of this special issue will gain a valuable insight into the increasing importance of collaborative practices via these studies.

The Kinematics of interference mechanisms in certain machining operations

The mechanism of "Helical Interference" in milled slots is examined and a coherent theory for the geometry of such surfaces is presented. An examination of the relevant literature shows a fragmented approach to the problem owing to its normally destructive nature, so a complete analysis is developed for slots of constant lead, thus giving a united and exact theory for many different setting parameters and a range of cutter shapes. For the first time, a theory is developed to explain the "Interference Surface" generated in variable lead slots for cylindrical work and attention is drawn to other practical surfaces, such as cones, where variable leads are encountered. Although generally outside the scope of this work, an introductory analysis of these cases is considered in order to develop the cylindrical theory. Special emphasis is laid upon practical areas where the interference mechanism can be used constructively and its application as the rake face of a cutting tool is discussed. A theory of rake angle for such cutting tools is given for commonly used planes, and relative variations in calculated rake angle between planes is examined. Practical tests are conducted to validate both constant lead and variable lead theories and some design improvements to the conventional dividing head are suggested in order to manufacture variable lead workpieces, by use of a "superposed" rotation. A prototype machine is manufactured and its kinematic principle given for both linear and non-linearly varying superposed rotations. Practical workpieces of the former type are manufactured and compared with analytical predictions,while theoretical curves are generated for non-linear workpieces and then compared with those of linear geometry. Finally suggestions are made for the application of these principles to the manufacture of spiral bevel gears, using the "Interference Surface" along a cone as the tooth form.

An investigation of the relationship between temperature, forces and tool wear in turning and drilling

Developing a means of predicting tool life has been and continues to be a focus of much research effort. A common experience in attempting to replicate such efforts is an inability to achieve the levels of agreement between theory and practice of the original researcher or to extrapolate the work to different materials or cutting conditions to those originally used. This thesis sets out to examine why most equations or models when replicated do not give good agreements. One reason which was found is that researchers in wear prediction, their predictions are limited because they generally fail to properly identify the nature of wear mechanisms operative in their study. Also they fail to identify or recognise factors having a significant influence on wear such as bar diameter. Also in this research the similarities and differences between the two processes of single point turning and drilling are examined through a series of tests. A literature survey was undertaken in wear and wear prediction. As a result it was found that there was a paucity in information and research in the work of drilling as compared to the turning operation. This was extended to the lack of standards that exist for the drilling operation. One reason for this scarcity in information on drilling is due to the complexity of the drilling and the tool geometry of the drill. In the comparative drilling and turning tests performed in this work, the same tool material; HSS, and similar work material was used in order to eliminate the differences which may occur due to this factor. Results of the tests were evaluated and compared for the two operations and SEM photographs were taken for the chips produced. Specific test results were obtained for the cutting temperatures and forces of the tool. It was found that cutting temperature is influenced by various factors like tool geometry and cutting speed, and the temperature itself influenced the tool wear and wear mechanisms that act on the tool. It was found and proven that bar diameter influences the temperature, a factor not considered previously.

Sustaining UK aerospace operations

Aerospace is a crucial industry for the UK economy and rated the second largest in the world and the largest in Europe. While major improvements in competitiveness have occurred in recent years, principally through the adoption of ‘Lean’ manufacturing techniques, these practices are insufficient to prepare the industry for the new and emerging challenges of the 21st Century. If this sector is to survive and grow, it needs understand and react to this emerging business environment, this paper therefore summarises research that has set out to quantify the forces of change impacting on this sector in the UK. This work is based on a systematic review of existing literature and an extensive survey of UK practitioners.

Competitive edge through operations management

A view has emerged within manufacturing and service organizations that the operations management function can hold the key to achieving competitive edge. This has recently been emphasized by the demands for greater variety and higher quality which must be set against a background of increasing cost of resources. As nations' trade barriers are progressively lowered and removed, so producers of goods and service products are becoming more exposed to competition that may come from virtually anywhere around the world. To simply survive in this climate many organizations have found it necessary to improve their manufacturing or service delivery systems. To become real ''winners'' some have adopted a strategic approach to operations and completely reviewed and restructured their approach to production system design and operations planning and control. The articles in this issue of the International journal of Operations & Production Management have been selected to illustrate current thinking and practice in relation to this situation. They are all based on papers presented to the Sixth International Conference of the Operations Management Association-UK which was held at Aston University in June 1991. The theme of the conference was "Achieving Competitive Edge" and authors from 15 countries around the world contributed to more than 80 presented papers. Within this special issue five topic areas are addressed with two articles relating to each. The topics are: strategic management of operations; managing change; production system design; production control; and service operations. Under strategic management of operations De Toni, Filippini and Forza propose a conceptual model which considers the performance of an operating system as a source of competitive advantage through the ''operation value chain'' of design, purchasing, production and distribution. Their model is set within the context of the tendency towards globalization. New's article is somewhat in contrast to the more fashionable literature on operations strategy. It challenges the validity of the current idea of ''world-class manufacturing'' and, instead, urges a reconsideration of the view that strategic ''trade-offs'' are necessary to achieve a competitive edge. The importance of managing change has for some time been recognized within the field of organization studies but its relevance in operations management is now being realized. Berger considers the use of "organization design", ''sociotechnical systems'' and change strategies and contrasts these with the more recent idea of the ''dialogue perspective''. A tentative model is suggested to improve the analysis of different strategies in a situation specific context. Neely and Wilson look at an essential prerequisite if change is to be effected in an efficient way, namely product goal congruence. Using a case study as its basis, their article suggests a method of measuring goal congruence as a means of identifying the extent to which key performance criteria relating to quality, time, cost and flexibility are understood within an organization. The two articles on production systems design represent important contributions to the debate on flexible production organization and autonomous group working. Rosander uses the results from cases to test the applicability of ''flow groups'' as the optimal way of organizing batch production. Schuring also examines cases to determine the reasons behind the adoption of ''autonomous work groups'' in The Netherlands and Sweden. Both these contributions help to provide a greater understanding of the production philosophies which have emerged as alternatives to more conventional systems -------for intermittent and continuous production. The production control articles are both concerned with the concepts of ''push'' and ''pull'' which are the two broad approaches to material planning and control. Hirakawa, Hoshino and Katayama have developed a hybrid model, suitable for multistage manufacturing processes, which combines the benefits of both systems. They discuss the theoretical arguments in support of the system and illustrate its performance with numerical studies. Slack and Correa's concern is with the flexibility characteristics of push and pull material planning and control systems. They use the case of two plants using the different systems to compare their performance within a number of predefined flexibility types. The two final contributions on service operations are complementary. The article by Voss really relates to manufacturing but examines the application of service industry concepts within the UK manufacturing sector. His studies in a number of companies support the idea of the ''service factory'' and offer a new perspective for manufacturing. Harvey's contribution by contrast, is concerned with the application of operations management principles in the delivery of professional services. Using the case of social-service provision in Canada, it demonstrates how concepts such as ''just-in-time'' can be used to improve service performance. The ten articles in this special issue of the journal address a wide range of issues and situations. Their common aspect is that, together, they demonstrate the extent to which competitiveness can be improved via the application of operations management concepts and techniques.