横断山区的翠雀属植物:分类学和细胞学

翠雀属Delphinium L.是毛茛科中的一个大属，全世界有300－400 余种，广布于北半球温带地区。我国是世界上记载翠雀属植物种类最多的国家，尤以西南横断山区种类最为丰富。 通过文献查阅、标本室研究和野外考察，本文对我国特别是横断山区翠雀属植物的主要形态性状在居群间和居群内的变异式样进行了初步分析，认为根的形态、叶的分裂程度、植株尤其是花序轴和花梗被毛与否以及毛被类型、小苞片的形状和位置、退化雄蕊的颜色、上萼片的形状、心皮数目和种子形态特征是比较可靠的分类性状。但性状之间的相关性往往较小，即使是通常比较稳定的分类性状有时也表现出不同程度的变异，因此同一性状对于不同等级分类群的划分和在不同分类群中的分类价值常不一样。在具体的分类处理中，应具体情况具体分析，尽可能利用较多的分类学性状或性状组合。 根据上述对我国翠雀属植物主要形态性状变异式样的理解，本文主要对我国西南横断山区及其邻近一些地区的翠雀属植物进行了力所能及的分类修订：将42 种和22 变种降为异名，提出2 新组合(毛梗黑水翠雀D. potaninii var. mollipes　(W. T. Wang) Q. Yuan & Q. E. Yang 和腺毛康定翠雀D. tatsienense var. pseudomosoynense (W. T. Wang) Q. E. Yang & Q. Yuan)，澄清了直距翠雀D. tenii Lévl. 的名实问题和Munz 等学者对我国翠雀属植物标本的鉴定错误以及由此引起的我国有关翠雀属植物的地理分布的混乱; 另有两种( 硕片翠雀D. grandilimbum W. T. Wang & M. J. Warnock 和永宁翠雀D. yongningense W. T. Wang & M. J. Warnock)因未见到模式标本，故暂存疑。本文讨论到的我国翠雀属植物共有87 种、10 变种。 为了在染色体水平上了解横断山区翠雀属植物的物种形成和分化，同时增加对整个翠雀族tribe Delphineae Warming 植物染色体进化的理解，本文报道了我国主要采自该地区的乌头属Aconitum L. 30 种、1 变种共40 个居群和翠雀属 48 种、3 变种共87 个居群的染色体数目，分析了30 种、1 变种乌头属植物和 46 种、3 变种翠雀属植物的核型，发现46 种、3 变种翠雀属植物为二倍体(2n = 2x=16)，1 种(黄毛翠雀D. chrysotrichum Finet & Gagnep.)为四倍体(2n = 4x =32)，1种(螺距翠雀D. spirocentrum Hand.-Mazz.)有二倍体和四倍体两种细胞型，3 种(宽距翠雀D. beesianum W. W. Smith、裂瓣翠雀D. mosoynense Franch.和康定翠雀 D. tatsienense Franch.)的个别居群有B 染色体出现。这表明横断山区翠雀属植物的物种形成主要在二倍体水平上进行。可能由于核型直向选择（karyotypic orthoselection）的结果，我国翠雀属植物的核型就整体情况而言在属内相当一致，属内核型分化不如乌头属中明显，外部形态上显得最为原始的种类如短距翠雀 D. forrestii Diels 和毛翠雀D. trichophorum Franch.的核型与其他多年生种类的核型相比并无明显区别。尽管如此，翠雀属植物的核型在属内仍表现出一定程度的分化：在多年生种类中，大理翠雀群(D. taliense group)的种类的染色体内部不对称性(intrachromosomal asymmetry) 程度较高, 但染色体之间的不对称性 (interchromosomal asymmetry)程度偏低;一年生种类与多年生种类相比，我国唯一的一年生种还亮草D. anthriscifolium Hance 染色体之间不对称性最高，该种染色体内部不对称性程度在翠雀族中也偏高，因此就其核型的整体不对称性程度而言，在翠雀属乃至整个翠雀族中最高，而地中海分布的一年生种类的染色体内部不对称性明显增强, 但染色体之间的不对称性在翠雀族中最低。这种核型分化的系统学和生物地理学意义尚不清楚，以后需进一步研究。与乌头属相比，翠雀属植物的染色体通常较小，核型中st 染色体明显增多（可达6 对），核型的整体不对称性程度逐渐增强; 虽然乌头属牛扁亚属Aconitum subgen. Lycoctonum (DC.) Peterm.的二倍体种类也一般具有较多的st 染色体（4 对），但这些st 染色体比乌头亚属Aconitum L. subgen. Aconitum和露蕊乌头亚属Aconitum subgen. Gymnaconitum (Stapf) Rapaics 植物核型中相对应的m 或 sm 染色体以及翠雀属和飞燕草属Consolida (DC.) S. F. Gray 植物中相对应的st 或偶尔出现的sm 染色体要大。特别应当注意的是牛扁亚属中外部形态上显得最为原始的展喙乌头A. novoluridum Munz 的核型具有较多而且较大的sm 染色体，所以我们认为展喙乌头的核型保留了较多的原始性质，那些核型中具有较多st 染色体的牛扁亚属植物应当是该亚属中在核型上已比较特化的种类。这一结果不支持前人提出的乌头属植物的核型有从st 染色体进化到m 或sm 染色体的趋势的观点。就整个翠雀族而言，从现有资料看，其核型的进化趋势应当为：(1) 染色体从大进化到小, 从m 或sm 染色体进化到st 染色体;(2) 核型的整体不对称性程度逐渐增强，即核型的二型性从多年生的牛扁亚属植物到翠雀属植物的一年生的还亮草亚属Delphinium subgen. Delphinium 而愈趋明显。翠雀族植物核型的进化方向与整个毛茛科核型的进化方向看来是一致的，即都向核型不对称性增强的方向进化。

Materials and devices toward three-dimensional integration

It has been shown that the apparent benefits of a two-layer stacked SOI system, i.e. packing density and speed improvements, are less than could be expected in the context of a VLSI requirement [1]. In this project the stacked SOI system has been identified as having major application in the realization of integrated, mixed technology systems. Zone-melting-recrystallization (ZMR) with lasers and electron beams have been used to produce device quality SOI material and a small test-bed circuit has been designed as a demonstration of the feasibility of this approach. © 1988.

X-ray propagation in carbon nanotubes

The maintenance of the growth of the multibillion-dollar semiconductor industry requires the development of techniques for the fabrication and characterisation of nanoscale devices. Consequently, there is great interest in photolithography techniques such as extreme UV and x-ray. Both of these techniques are extremely expensive and technologically very demanding. In this paper we describe research on the feasibility of exploiting x-ray propagation within carbon nanotubes (CNT's) for the fabrication and characterisation of nanoscale devices. This work discusses the parameters determining the design space available. To demonstrate experimentally the feasibility of x-ray propagation, arrays of carbon nanotubes have been grown on silicon membranes. The latter are required to provide structural support for the CNT's while minimising energy loss. To form a waveguide metal is deposited between the nanotubes to block x-ray transmission in this region at the same time as cladding the CNT's. The major challenge has been to fill the spaces between the CNT's with material of sufficient thickness to block x-ray transmission while maintaining the structural integrity of the CNT's. Various techniques have been employed to fill the gaps between the nanotubes including electroplating, sputtering and evaporation. This work highlights challenges encountered in optimising the process.

‘All the places we were not supposed to go’: a case study of formative class and gender habitus in adventure climbing

This paper explores the origins of meaning in adventurous activities. Specifically, the paper reports on a study of 10 adventure climbers in the Scottish mountaineering community. The study explores how formative experiences have influenced engagement in adventure climbing. Work has been done on the phenomenology of adventure and how individuals interpret and find meaning in the activity—this paper goes a step further and asks where do these dispositions come from? Using Bourdieu’s ideas of field, habitus and forms of capital to frame these experiences in the wider social environment, early experiences are identified that, for the subjects of this study, provide a framework for their later adoption of the ‘adventure habitus’. Among these influences are mainstream education, adventure education in particular, as well as broader formative experiences relating to factors such as gender and class. In addition, the study suggests that accounts differ between males and females in terms of their attitudes and dispositions towards adventure. This may relate to their respective experiences as well as expanding opportunities for both males and females. However, while the ‘adventure field��� provides a context where women can develop transformative identities, these are nearly always subject to male validation.

Characterisation of the microbiota of traditional fermented beverages and screening these and other populations for novel antimicrobial producers and gene clusters

To screen for novel ribosomally synthesised antimicrobials, in-silico genome mining was performed on all publically available fully sequenced bacterial genomes. 49 novel type 1 lantibiotic clusters were identified from a number of species, genera and phyla not usually associated with lantibiotic production, and indicates high prevalence. A crucial step towards the commercialisation of fermented beverages is the characterisation of the microbial content. To achieve this goal, we applied next-generation sequencing techniques to analyse the bacterial and yeast populations of the organic, symbiotically-fermented beverages kefir, water kefir and kombucha. A number of minor components were revealed, many of which had not previously been associated with these beverages. The dominant microorganism in each of the water kefir grains and fermentates was Zymomonas, an ethanol-producing bacterium that had not previously been detected on such a scale. These studies represent the most accurate description of these populations to date, and should aid in future starter design and in determining which species are responsible for specific attributes of the beverages. Finally, high-throughput robotics was applied to screen for the presence of antimicrobial producers associated with these beverages. This revealed a low frequency of bacteriocin production amongst the bacterial isolates, with only lactococcins A, B and LcnN of lactococcin M being identified. However, a proteinaceous antimicrobial produced by the yeast Dekkera bruxellensis, isolated from kombucha, was found to be active against Lactobacillus bulgaricus. This peptide was patially purified.

Construction of invisibility cloaks of arbitrary shape and size using planar layers of metamaterials

Transformation optics (TO) is a powerful tool for the design of electromagnetic and optical devices with novel functionality derived from the unusual properties of the transformation media. In general, the fabrication of TO media is challenging, requiring spatially varying material properties with both anisotropic electric and magnetic responses. Though metamaterials have been proposed as a path for achieving such complex media, the required properties arising from the most general transformations remain elusive, and cannot implemented by state-of-the-art fabrication techniques. Here, we propose faceted approximations of TO media of arbitrary shape in which the volume of the TO device is divided into flat metamaterial layers. These layers can be readily implemented by standard fabrication and stacking techniques. We illustrate our approximation approach for the specific example of a two-dimensional, omnidirectional "invisibility cloak", and quantify its performance using the total scattering cross section as a practical figure of merit. © 2012 American Institute of Physics.

A model to predict the life of pneumatic conveyor bends

A new approach to the prediction of bend lifetime in pneumatic conveyors, subject to erosive wear is described. Mathematical modelling is exploited. Commercial Computational Fluid Dynamics (CFD) software is used for the prediction of air flow and particle tracks, and custom code for the modelling of bend erosion and lifetime prediction. The custom code uses a toroidal geometry, and employs a range of empirical data rather than trying to fit classical erosion models to a particular circumstance. The data used was obtained relatively quickly and easily from a gas-blast erosion tester. A full-scale pneumatic conveying rig was used to validate a sample of the bend lifetime predictions, and the results suggest accuracy of within ±65%, using calibration methods. Finally, the work is distilled into user-friendly interactive software that will make erosion lifetime predictions for a wide range of bends under varying conveying conditions. This could be a valuable tool for the pneumatic conveyor design or maintenance engineer.

Detection and impacts of leakage from sub-seafloor deep geological carbon dioxide storage

Fossil fuel power generation and other industrial emissions of carbon dioxide are a threat to global climate1, yet many economies will remain reliant on these technologies for several decades2. Carbon dioxide capture and storage (CCS) in deep geological formations provides an effective option to remove these emissions from the climate system3. In many regions storage reservoirs are located offshore4, 5, over a kilometre or more below societally important shelf seas6. Therefore, concerns about the possibility of leakage7, 8 and potential environmental impacts, along with economics, have contributed to delaying development of operational CCS. Here we investigate the detectability and environmental impact of leakage from a controlled sub-seabed release of CO2. We show that the biological impact and footprint of this small leak analogue (<1 tonne CO2 d���1) is confined to a few tens of metres. Migration of CO2 through the shallow seabed is influenced by near-surface sediment structure, and by dissolution and re-precipitation of calcium carbonate naturally present in sediments. Results reported here advance the understanding of environmental sensitivity to leakage and identify appropriate monitoring strategies for full-scale carbon storage operations.

A novel sub-seabed CO2 release experiment informing monitoring and impact assessment for geological carbon storage

Carbon capture and storage is a mitigation strategy that can be used to aid the reduction of anthropogenic CO2 emissions. This process aims to capture CO2from large point-source emitters and transport it to a long-term storage site. For much of Europe, these deep storage sites are anticipated to be sited below the sea bed on continental shelves. A key operational requirement is an understanding of best practice of monitoring for potential leakage and of the environmental impact that could result from a diffusive leak from a storage complex. Here we describe a controlled CO2release experiment beneath the seabed, which overcomes the limitations of laboratory simulations and natural analogues. The complex processes involved in setting up the experimental facility and ensuring its successful operation are discussed, including site selection, permissions, communications and facility construction. The experimental design and observational strategy are reviewed with respect to scientific outcomes along with lessons learnt in order to facilitate any similar future.

Costs and benefits to European shipping of ballast-water and hull-fouling treatment: Impacts of native and non-indigenous species

Maritime transport and shipping are impacted negatively by biofouling, which can result in increased fuel consumption. Thus, costs for fouling reduction can be considered an investment to reduce fuel consumption. Anti-fouling measures also reduce the rate of introduction of non-indigenous species (NIS). Further mitigation measures to reduce the transport of NIS within ballast water and sediments impose additional costs. The estimated operational cost of NIS mitigation measures may represent between 1.6% and 4% of the annual operational cost for a ship operating on European seas, with the higher proportional costs in small ships. However, fouling by NIS may affect fuel consumption more than fouling by native species due to differences in species’ life-history traits and their resistance to antifouling coatings and pollution. Therefore, it is possible that the cost of NIS mitigation measures could be smaller than the cost from higher fuel consumption arising from fouling by NIS.

Detection and impacts of leakage from sub-seafloor deep geological carbon dioxide storage

Fossil fuel power generation and other industrial emissions of carbon dioxide are a threat to global climate1, yet many economies will remain reliant on these technologies for several decades2. Carbon dioxide capture and storage (CCS) in deep geological formations provides an effective option to remove these emissions from the climate system3. In many regions storage reservoirs are located offshore4, 5, over a kilometre or more below societally important shelf seas6. Therefore, concerns about the possibility of leakage7, 8 and potential environmental impacts, along with economics, have contributed to delaying development of operational CCS. Here we investigate the detectability and environmental impact of leakage from a controlled sub-seabed release of CO2. We show that the biological impact and footprint of this small leak analogue (<1 tonne CO2 d���1) is confined to a few tens of metres. Migration of CO2 through the shallow seabed is influenced by near-surface sediment structure, and by dissolution and re-precipitation of calcium carbonate naturally present in sediments. Results reported here advance the understanding of environmental sensitivity to leakage and identify appropriate monitoring strategies for full-scale carbon storage operations.

The Sentinel-3 Mission Performance Center

As part of the Sentinel-3 mission and in order to ensure the highest quality of products, ESA in cooperation with EUMETSAT has set up the Sentinel-3 Mission Performance Centre (S-3 MPC). This facility is part of the Payload Data Ground Segment (PDGS) and aims at controlling the quality of all generated products, from L0 to L2. The S-3 MPC is composed of a Coordinating Centre (CC), where the core infrastructure is hosted, which is in charge of the main routine activities (especially the quality control of data) and the overall service management. Expert Support Laboratories (ESLs) are involved in calibration and validation activities and provide specific assessment of the products (e.g., analysis of trends, ad hoc analysis of anomalies, etc.). The S-3 MPC interacts with the Processing Archiving Centres (PACs) and the Marine centre at EUMETSAT.

Clinical traits of LRRK2-associated parkinson's disease in ireland: a link between familial and idiopathic PD

The role of genetics in parkinsonism has been confirmed over the last decade with the identification of genetic variation in seven genes, which are causative in familial forms of the disorder. A number of pathogenic mutations have been identified in the latest gene LRRK2, with a Gly2019Ser amino acid substitution identified in two siblings and one patient with idiopathic Parkinson's disease from Ireland. The clinical features resemble the idiopathic variant with a tremor predominant clinical picture shared by the siblings, slow progression of symptoms, and no observation of cognitive disturbance in all. The family and the sporadic individual were apparently not related and originated from different regions of Ireland, although haplotype analysis does suggest they share a common founder. The influence of the G2019S substitution on protein function and disease phenotype has yet to be fully resolved, but its elucidation will undoubtedly further our understanding of the mechanisms underlying Parkinson's disease.