Internationalization of small and medium sized UK manufacturing enterprises:technology and knowledge transfer perspective

This dissertation examines internationalisation of small and medium sized enterprises. There has been a journey to achieve this. The research has started as an action research as Teaching Company Scheme Associate. This has been done in two research cycles, which investigated factors for successful internationalisation of a small and medium sized UK manufacturing enterprise. This has revealed that successful internationalisation requires good technology and knowledge transfer to the new operations. The action research is followed by a survey that has been conducted within UK manufacturing companies. The data collected was analysed under three models: entry mode selection, role of factory and level of internationalisation. The first two models explain two major aspects of internationalisation decision. The last is showing what makes successful internationalising small and medium sized companies. These models provided several important results. The small and medium sized enterprise internationalisation is harder to achieve because most of these organisations do not have experience in technology and knowledge transfer. The success of internationalisation depends on the success of the transfer. This is achieved through employee ownership of the new knowledge. There are many factors affecting this result such as the network relationships such as trust, control and commitment and cognitive distance between two organisations. The last is a product of the difference between prior knowledge and the required level of knowledge. The entry mode and role of factory are decided through these factors while the level of internationalisation can only be explained by absorptive capacity of the recipient organisation and the technology transfer ability of the host organisation.

Determinants of Decentralization within the Firm: Some Empirical Evidence from Spanish Small and Medium- Sized Enterprise

This paper examines empirically the determinants of decentralization of decision- making in the firm for small and medium-sized enterprises (SMEs) that tend to be highly centralized. By decentralization of decisions we mean the delegation of decision rights from the owner or manager to the plant supervisor or even to floor workers. Our findings show that the allocation of authority to basic workers or a team of workers depends on firm characteristics such as firm size, the use of internal networks or the number of workplaces, and workers characteristics, in particular, the composition of the laborforce in terms of education and seniority and whether or not workers receive pay incentives. External factors such as the intensity of competition and the firm s export intensity are also important determinants of the allocation of authority.

Understanding absorptive capacity in Malaysian small and medium sized (SME) construction companies

Purpose – The construction industry is a very important part of the Malaysian economy. The government's aim is to make the industry more productive, efficient and safe. Small to medium-sized enterprises (SMEs) are at the core of the Malaysian construction industry and account for about 90 per cent of companies undertaking construction work. One of the main challenges faced by the Malaysian construction industry is the ability to absorb new knowledge and technology and to implement it in the construction phase. The purpose of this paper is to consider absorptive capacity in Malaysian construction SMEs in rural areas. Design/methodology/approach – The research was conducted in three stages: first, understanding the Malaysian construction industry; second, a literature review on the issues related to absorptive capacity and discussions with the Construction Industry Development Board (CIDB); and third, multiple case studies in five construction SMEs operating in a rural area to validate the factors influencing absorptive capacity. Findings – Nine key factors were identified influencing absorptive capacity in Malaysian construction SMEs operating in rural areas. These factors involved: cost and affordability; availability and supply; demand; infrastructure; policies and regulations; labour readiness; workforce attitude and motivation; communication and sources of new knowledge and; culture. Originality/value – The key factors influencing absorptive capacity presented in this paper are based on validation from the case studies in five construction SMEs in Malaysia. The research focuses on how they operate in rural areas; however, the research results have wider application than just Malaysia. The key factors identified as influencing absorptive capacity can serve as a basis for considering knowledge absorption in the wider context by SMEs in other developing countries.

Information technology for development of small and medium-sized exporters in Latin America and East Asia

Includes bibliography

A beszerzés helye és szerepe a kis és középvállalatok gyakorlatában = The role of purchasing in small and medium sized companies

A tanulmány a szakirodalom azon egyre szélesedő részéhez járul hozzá, amely a kis és középvállalatok gyakorlatával, sajátosságaik vizsgálatával foglalkozik. Egy speciális aspektust emel ki, mely a hazai nagyvállalati működésben jelentős fejlődésen ment keresztül azzal, hogy a KKV-k beszerzési sajátosságainak megismerését célozza meg. Az áttekintő kép kialakításához a nemzetközi szakirodalomban elérhető empirikus eredményeket és a BCE-n folyó Versenyképesség Kutatás kérdőíves adatbázisának válaszait dolgozza fel. Olyan kérdéseket emel ki, mint a beszerzés szerepe a KKV-k működésében és az azt befolyásoló tényezők illetve a beszerzési gyakorlat sajátosságai. _________ Small and medium sized enterprises play an important role in every economy. This article aims to contribute to the growing number of literature focusing on SMEs management practice. It highlights a management field, which has gone through a significant development in large companies’ practice as it investigates the purchasing and supplier management related issues. The overview is based on a review of literature and the analysis of the survey database of Competitiveness Research of CUB. It highlights such topics as the role of purchasing in SMEs, factors influencing the perceived importance and the purchasing practice of SME-s.

THE ROLE OF DYNAMIC CAPABILITIES IN THE INTERNATIONALIZATION OF MEDIUM SIZED FINNISH MANUFACTURING FIRMS - A case for Sormat Oy

A rapidly changing business environment has necessitated most small and medium sized enterprises with international ambitions to reconsider their sources of competitive advantage. To survive in the face of a changing business environment, firms should utilize their dynamic organizational capabilities as well as their internationalization capabilities. Firms develop a competitive advantage if they can exploit their unique organizational competences in a new or foreign market and also if they can acquire new capabilities as a result of engaging in foreign markets. The acquired capabilities from foreign locations enhance the existing capability portfolio of a firm with a desire to internationalize. The study combined the research streams of SME organizational dynamic capability and internationalization capability to build a complete picture on the existing knowledge. An intensive case study was used for empirically testing the theoretical framework of the study and compared with the literature on various organizational capability factors and internationalization capabilities. Sormay Oy was selected because it is a successful medium sized company operating in Finland in the manufacturing industry which has a high international profile. In addition, it has sufficient rate of growth in sales that warrants it to engage internationally in matters such as, acquisitions, joint ventures and partnerships. The key findings of the study suggests that, medium sized manufacturing firms have a set of core competences arising from their organizational capabilities which were identified to be employee know how and relationship with stakeholders which aid the firm in its quest for attaining competitive advantage, ensuring production flexibility and gaining benefits present in a network. In addition, internationalization capabilities were identified under both the RAT test and CAT test whereby the primary findings suggests that, firms that outperform their competitors produce products that meet specific customer and country requirements, foresee the pitfalls of imitation brought about by the foreign local companies and members of a particular network through joint ventures, acquisitions or partnerships as well as those firms that are capable to acquire new capabilities in the foreign markets and successfully use these acquired capabilities to enhance or renew their capability portfolio for their competitive advantage. Additional significant findings under internationalization capabilities were discovered whereby, Sormay Oy was able to develop a new market space for its products despite the difficult institutional environment present in Russia.

Business implications of manufacturing innovation : the experience of increasing automation in smaller to medium sized companies.

Despite the considerable potential of advanced manufacturing technologies (AMT) for improving the economic performance of many firms, a growing body of literature highlights many instances where realising this potential has proven to be a more difficult task than initially envisaged. Focussing upon the implementation of new manufacturing technologies in several smaller to medium sized enterprises (SME), the research examines the proposition that many of these problems can be attributed in part to inadequate consideration of the integrated nature of such technologies, where the effects of their implementation are not localised, but are felt throughout a business. The criteria for the economic evaluation of such technologies are seen as needing to reflect this, and the research develops an innovative methodology employing micro-computer based spreadsheets, to demonstrate how a series of financial models can be used to quantify the effects of new investments upon overall company performance. Case studies include: the development of a prototype machine based absorption costing system to assist in the evaluation of CNC machine tool purchases in a press making company; the economics and strategy of introducing a flexible manufacturing system for the production of ballscrews; and analysing the progressive introduction of computer based printing presses in a packaging and general print company. Complementary insights are also provided from discussion with the management of several other companies which have experienced technological change. The research was conducted as a collaborative CASE project in the Interdisciplinary Higher Degrees Scheme and was jointly funded by the SERC and Gaydon Technology Limited and later assisted by PE-Inbucon. The findings of the research shows that the introduction of new manufacturing technologies usually requires a fundamental rethink of the existing practices of a business. In particular, its implementation is seen as ideally needing to take place as part of a longer term business and manufacturing strategy, but that short term commercial pressures and limited resources often mean that firms experience difficulty in realising this. The use of a spreadsheet based methodology is shown to be of considerable assistance in evaluating new investments, and is seen as being the limit of sophistication that a smaller business is willing to employ. Several points for effective modelling practice are also given, together with an outline of the context in which a modelling approach is most applicable.

Obstacles for chinese and brazilian companies in the bilateral trade between China and Brazil

Brasil e a República Popular da China iniciaram a sua relação diplomática em 1974, na época, o comércio entre Brasil e China foi de apenas 17,42 milhões de dólares, 5 anos depois, em 1979, a escala deste comércio bilateral aumentou 12 pastas. Hoje em dia, o comércio bilateral entre a China e o Brasil já contava mais de 57,000 milhões de dólares USD. China tornou-se já o primeiro parceiro comercial do Brasil, e do Brasil em troca torna-se o primeiro parceiro comercial na América Latina. Esta dissertação teve como objetivo compreender os obstáculos para as PME brasileiras e chinesas no comércio entre os dois países e dar recomendações às autoridades públicas e empresas privadas sobre como superá-los. Com uma análise qualitativa, baseada em entrevistas com as empresas chinesas e brasileiras para identificar quais são os obstáculos mais graves para as empresas brasileiras e chinesas para beneficiar mais o comércio bilateral. O estudo feito pela OCDE-APEC em barreiras de internacionalização das PME é usado como um quadro para melhor identificar quais são os obstáculos mais graves no caso das PME brasileiras e chinesas.

A conceptual framework for supply chain collaboration:empirical evidence from the agri-food industry

Purpose - The purpose of this paper is to analyse the concept of supply chain collaboration and to provide an overall framework that can be used as a conceptual landmark for further empirical research. In addition, the concept is explored in the context of agri-food industry and particularities are identified. Finally, the paper submits empirical evidence from an exploratory case study in the agri-food industry, at the grower-processor interface, and information regarding the way the concept is actually applied in small medium-sized enterprises (SMEs) is presented. Design/methodology/approach - The paper employed case study research by conducting in-depth interviews in the two companies. Findings - Supply chain collaboration concept is of significant importance for the agri-food industry however, some constraints arise due to the nature of industry's products, and the specific structure of the sector. Subsequently, collaboration in the supply chain is often limited to operational issues and to logistics-related activities. Research limitations/implications - Research is limited to a single case study and further qualitative testing of the conceptual model is needed in order to adjust the model before large scale testing. Practical implications - Case study findings may be transferable to other similar dual relationships at the grower-processor interface. Weaker parts in asymmetric relationships have opportunities to improve their position, altering the dependence balance, by achieving product/process excellence. Originality/value - The paper provides evidence regarding the applicability of the supply chain collaboration concept in the agri-food industry. It takes into consideration not relationships between big multinational companies, but SMEs. © Emerald Group Publishing Limited.

Russia, China, India Foresight for Small and Medium size Enterprises in Uusimaa : Changes forecast in the Russian, Chinese and Indian operating environments from the viewpoint of small and middle-sized enterprises in Uusimaa

The report describes those factors of the future that are related to the growth and needs of Russia, China, and India and that may provide significant internationalisation potential for Uusimaa companies. The report examines the emerging trends and market-entry challenges for each country separately. Additionally, it evaluates the training needs of Uusimaa companies in terms of the current offerings available for education on topics related to Russia, China, and India. The report was created via the Delphi method: experts were interviewed, and both Trendwiki material and the latest literature were used to create a summary of experts’ views, statements, and reasons behind recent developments. This summary of views was sent back to the experts with the objective of reaching consensus synthesising the differing views or, at least, of providing argumentation for the various alternative lines of development. In addition to a number of outside experts and business leaders, all heads of Finpro’s Finland Trade Centers participated in the initial interviews. The summary was commented upon by all Finpro consultants and analysts for Russia, China, and India, with each focusing on his or her own area of expertise. The literature used consisted of reports, listed for each country, and an extensive selection of the most recent newspaper articles. The report was created in January-April 2010. On 22 April 2010 its results were reviewed at the final report presentation in cooperation with the Uusimaa ELY Centre.

PRODUCT DATA MANAGEMENT FOR FINNISH SMALL AND MEDIUM-SIZED MANUFACTURING ENTERPRISES - Towards a viable information system concept

Product Data Management (PDM) systems have been utilized within companies since the 1980s. Mainly the PDM systems have been used by large companies. This thesis presents the premise that small and medium-sized companies can also benefit from utilizing the Product Data Management systems. Furthermore, the starting point for the thesis is that the existing PDM systems are either too expensive or do not properly respond to the requirements SMEs have. The aim of this study is to investigate what kinds of requirements and special features SMEs, operating in Finnish manufacturing industry, have towards Product Data Management. Additionally, the target is to create a conceptual model that could fulfill the specified requirements. The research has been carried out as a qualitative case study, in which the research data was collected from ten Finnish companies operating in manufacturing industry. The research data is formed by interviewing key personnel from the case companies. After this, the data formed from the interviews has been processed to comprise a generic set of information system requirements and the information system concept supporting it. The commercialization of the concept is studied in the thesis from the perspective of system development. The aim was to create a conceptual model, which would be economically feasible for both, a company utilizing the system and for a company developing it. For this reason, the thesis has sought ways to scale the system development effort for multiple simultaneous cases. The main methods found were to utilize platform-based thinking and a way to generalize the system requirements, or in other words abstracting the requirements of an information system. The results of the research highlight the special features Finnish manufacturing SMEs have towards PDM. The most significant of the special features is the usage of project model to manage the order-to-delivery –process. This differs significantly from the traditional concepts of Product Data Management presented in the literature. Furthermore, as a research result, this thesis presents a conceptual model of a PDM system, which would be viable for the case companies interviewed during the research. As a by-product, this research presents a synthesized model, found from the literature, to abstract information system requirements. In addition to this, the strategic importance and categorization of information systems within companies has been discussed from the perspective of information system customizations.

MERCOSUR: its challenges to small and medium-sized industrial enterprises in terms of competition

Includes bibliography

Relationship characteristics within the supply chain of small and medium-sized construction enterprises in Thailand

The Small and Medium-sized construction Enterprises (construction SMEs) in Thailand face challenges like high fragmented structure and low productivity. Many industries improved their business performance using the supply chain integration. This research was conducted by interviewing 14 small and medium Thai building contractors to understand the features and relationship characteristics of the supply chain of construction SMEs. The study reveals that the linkages between the small and medium general contractors and other supply chain members are based on personal trust rather than contract laws, there is no systematic procedure to manage the relationship with clients during the project execution, and social connections help to maintain long-term relationship with clients. Based on the working behaviour and commitment to long-term relationship, six forms of relationship with supply side members are proposed. Finally, improvement measures for the supply chain integration of the construction SMEs in Thailand are presented.