Bamboo as sustainable material used in design and civil construction: species, management, characterization and applications

The use of bamboo as construction and raw material for producing products can be considered a feasible alternative to the abusive use of steel, concrete and oil byproducts. Its use can also reduce the pressure on the use of wood from native and planted forests. Although there are thousands of bamboo species spread about the world and Brazil itself has hundreds of native species, the use and basic knowledge of its characteristics and applications are still little known and little disseminated. This paper's main objective is to introduce the species, the management phases, the physical and mechanical characteristics and the experiences in using bamboo in design and civil construction as per the Bamboo Project implemented at UNESP, Bauru campus since 1994. The results are divided into: a) Field activities - description of the technological species of interest, production chain flows, types of preservative treatments and clump management practices for the development, adaptation and production of different species of culms; b) Lab experiments - physical and mechanical characterization of culms processed as laminated strips and as composite material (glue laminated bamboo – glubam); c) Uses in projects - experiences with natural bamboo and glubam in design, architecture and civil construction projects. In the final remarks, the study aims to demonstrate, through practical and laboratory results, the material's multi-functionality and the feasibility in using bamboo as a sustainable material.

Experimental Data on Fire-Resistance Behavior of Reinforced Concrete Structures with Example Calculations

This thesis selects concrete, steel and their relation as research subjects, mainly commentary and discusses the property changes of steel and concrete materials under and after high temperature.The differences and comparisons of reasearch methods and ways between different researchers and different papers,particularly for chinese researches and chinese papers,and partly for comparison between chinese papers methods and Euro-Amercian papers methods about Fire Resistance Behavior of Reinforced Concrete will be summarized and analyzed.The researches on fire-resistance behavior of reinforced concrete become more and more important all over the world. And I would find differences between Chinese researches results, between Chinese researches results and other countries researches results.

Estudio de la redistribución tensional en la interfase frp-hormigón

El uso de materiales compuestos para el refuerzo, reparación y rehabilitación de estructuras de hormigón se ha convertido en una técnica muy utilizada en la última década. Con independencia de la técnica del refuerzo, uno de los principales condicionantes del diseño es el fallo de la adherencia entre el hormigón y el material compuesto, atribuida generalmente a las tensiones en la interfaz de estos materiales. Las propiedades mecánicas del hormigón y de los materiales compuestos son muy distintas. Los materiales compuestos comúnmente utilizados en ingeniería civil poseen alta resistencia a tracción y tienen un comportamiento elástico y lineal hasta la rotura, lo cual, en contraste con el ampliamente conocido comportamiento del hormigón, genera una clara incompatibilidad para soportar esfuerzos de forma conjunta. Esta incompatibilidad conduce a fallos relacionados con el despegue del material compuesto del sustrato de hormigón. En vigas de hormigón reforzadas a flexión o a cortante, el despegue del material compuesto es un fenómeno que frecuentemente condiciona la capacidad portante del elemento. Existen dos zonas potenciales de iniciación del despegue: los extremos y la zona entre fisuras de flexión o de flexión-cortante. En el primer caso, la experiencia a través de los últimos años ha demostrado que se puede evitar prolongando el refuerzo hasta los apoyos o mediante el empleo de algún sistema de anclaje. Sin embargo, las recomendaciones para evitar el segundo caso de despegue aún se encuentran lejos de poder prever el fallo de forma eficiente. La necesidad de medir la adherencia experimentalmente de materiales FRP adheridos al hormigón ha dado lugar a desarrollar diversos métodos por la comunidad de investigadores. De estas campañas experimentales surgieron modelos para el pronóstico de la resistencia de adherencia, longitud efectiva y relación tensión-deslizamiento. En la presente tesis se propone un ensayo de beam-test, similar al utilizado para medir la adherencia de barras de acero, para determinar las características de adherencia del FRP al variar la resistencia del hormigón y el espesor del adhesivo. A la vista de los resultados, se considera que este ensayo puede ser utilizado para investigar diferentes tipos de adhesivos y otros métodos de aplicación, dado que representa con mayor realidad el comportamiento en vigas reforzadas. Los resultados experimentales se trasladan a la comprobación del fallo por despegue en la región de fisuras de flexión o flexión cortante en vigas de hormigón presentando buena concordancia. Los resultados condujeron a la propuesta de que la limitación de la deformación constituye una alternativa simple y eficiente para prever el citado modo de fallo. Con base en las vigas analizadas, se propone una nueva expresión para el cálculo de la limitación de la deformación del laminado y se lleva a cabo una comparación entre los modelos existentes mediante un análisis estadístico para evaluar su precisión. Abstract The use of composite materials for strengthening, repairing or rehabilitating concrete structures has become more and more popular in the last ten years. Irrespective of the type of strengthening used, design is conditioned, among others, by concrete-composite bond failure, normally attributed to stresses at the interface between these two materials. The mechanical properties of concrete and composite materials are very different. Composite materials commonly used in civil engineering possess high tensile strength (both static and long term) and they are linear elastic to failure, which, in contrast to the widely known behavior of concrete, there is a clear incompatibility which leads to bond-related failures. Bond failure in the composite material in bending- or shear-strengthened beams often controls bearing capacity of the strengthened member. Debonding failure of RC beams strengthened in bending by externally-bonded composite laminates takes place either, at the end (plate end debonding) or at flexure or flexure-shear cracks (intermediate crack debonding). In the first case, the experience over the past years has shown that this can be avoided by extending laminates up to the supports or by using an anchoring system. However, recommendations for the second case are still considered far from predicting failure efficiently. The need to experimentally measure FRP bonding to concrete has induced the scientific community to develop test methods for that purpose. Experimental campaigns, in turn, have given rise to models for predicting bond strength, effective length and the stress-slip relationship. The beam-type test proposed and used in this thesis to determine the bonding characteristics of FRP at varying concrete strengths and adhesive thicknesses was similar to the test used for measuring steel reinforcement to concrete bonding conditions. In light of the findings, this test was deemed to be usable to study different types of adhesives and application methods, since it reflects the behavior of FRP in strengthened beams more accurately than the procedures presently in place. Experimental results are transferred to the verification of peeling-off at flexure or flexure-shear cracks, presenting a good general agreement. Findings led to the conclusion that the strain limitation of laminate produces accurate predictions of intermediate crack debonding. A new model for strain limitation is proposed. Finally, a comprehensive evaluation based on a statistical analysis among existing models is carried out in order to assess their accuracy.

Effect of adhesive thickness and concrete strength on FRP-Concrete Bonds

The use of fiber-reinforced polymer (FRP) composites for strengthening, repairing, or rehabilitating concrete structures has become more and more popular in the last 10 years. Irrespective of the type of strengthening used, design is conditioned, among others, by concrete-composite bond failure, normally attributed to stress at the interface between these two materials. Single shear, double shear, and notched beam tests are the bond tests most commonly used by the scientific community to estimate bond strength, effective length, and the bond stress-slip relationship. The present paper discusses the effect of concrete strength and adhesive thickness on the results of beam tests, which reproduce debonding conditions around bending cracks much more accurately. The bond stress-slip relationship was analyzed in a cross section near the inner edge, where stress was observed to concentrate. The ultimate load and the bond stress-slip relationship were visibly affected by concrete strength. Adhesive thickness, in turn, was found to have no significant impact on low-strength concrete but a somewhat greater effect on higher strength materials.

Performance of buildings with masonry infill walls during the 2011 Lorca earthquake

On Wednesday 11th May 2011 at 6:47 pm (local time) a magnitude 5.1 Mw earthquake occurred 6 km northeast of Lorca with a depth of around 5 km. As a consequence of the shallow depth and the small epicentral distance, important damage was produced in several masonry constructions and even led to the collapse of one of them. Pieces of the facades of several buildings fell down onto the sidewalk, being one of the reasons for the killing of a total of 9 people. The objective of this paper is to describe and analyze the failure patterns observed in reinforced concrete frame buildings with masonry infill walls ranging from 3 to 8 floors in height. Structural as well as non-structural masonry walls suffered important damage that led to redistributions of forces causing in some cases the failure of columns. The importance of the interaction between the structural frames and the infill panels is analyzed by means of non-linear Finite Element Models. The resulting load levels are compared with the member capacities and the changes of the mechanical properties during the seismic event are described and discussed. In the light of the results obtained the observed failure patterns are explained. Some comments are stated concerning the adequacy of the numerical models that are usually used during the design phase for the seismic analysis.

Produtividade na montagem de estruturas de aço para edifícios.

A busca por melhorias de produtividade na indústria da construção civil é fundamental para garantia do crescimento sustentável do setor. Nesse sentido, o uso de estruturas de aço na construção de edifícios aparece como uma alternativa interessante às tradicionais estruturas em concreto armado. Essa dissertação tem por objetivo o estudo da produtividade da mão de obra e de equipamentos de içamento na montagem de estruturas de aço para edifícios de múltiplos pavimentos, buscando comprovar a hipótese de que essa produtividade varia em conjunto com alguns fatores que podem ser identificados e que essa variação pode ser quantificada. A pesquisa foi realizada segundo metodologia de Estudo de Caso, sendo que cinco obras compuseram o estudo. Como resultados, observa-se que produtividade potencial da mão de obra variou entre 3,33 e 8,23 Hh/peça ou 11,8 e 33,8 Hh/t e que a produtividade potencial dos equipamentos variou entre 0,38 e 0,53 Eqh/peça ou 1,84 e 2,29 Eqh/t, além de terem se encontrado correlações significativas entre os fatores tonelada/peça, disponibilidade do equipamento de içamento e quantidade relativa de pilares e os indicadores de produtividade.

Resistance of reinforced concrete structures under high intensity loads /

Mode of access: Internet.

Modellazione strutturale di edifici storici in muratura e misti: valutazioni comparate e criteri operativi

L’obiettivo della presente tesi è evidenziare l’importanza dell’approccio critico alla valutazione della vulnerabilità sismica di edifici in muratura e misti Il contributo della tesi sottolinea i diversi risultati ottenuti nella modellazione di tre edifici esistenti ed uno ipotetico usando due diversi programmi basati sul modello del telaio equivalente. La modellazione delle diverse ipotesi di vincolamento ed estensione delle zone rigide ha richiesto la formulazione di quattro modelli di calcolo in Aedes PCM ed un modello in 3muri. I dati ottenuti sono stati confrontati, inoltre, con l’analisi semplificata speditiva per la valutazione della vulnerabilità a scala territoriale prevista nelle “Linee Guida per la valutazione e riduzione del rischio sismico del Patrimonio Culturale”. Si può notare che i valori ottenuti sono piuttosto diversi e che la variabilità aumenta nel caso di edifici non regolari, inoltre le evidenze legate ai danni realmente rilevati sugli edifici mostrano un profondo iato tra la previsione di danno ottenuta tramite calcolatore e le lesioni rilevate; questo costituisce un campanello d’allarme nei confronti di un approccio acritico nei confronti del mero dato numerico ed un richiamo all’importanza del processo conoscitivo. I casi di studio analizzati sono stati scelti in funzione delle caratteristiche seguenti: il primo è una struttura semplice e simmetrica nelle due direzioni che ha avuto la funzione di permettere di testare in modo controllato le ipotesi di base. Gli altri sono edifici reali: il Padiglione Morselli è un edificio in muratura a pianta a forma di C, regolare in pianta ed in elevazione solamente per quanto concerne la direzione y: questo ha permesso di raffrontare il diverso comportamento dei modelli di calcolo nelle sue direzioni; il liceo Marconi è un edificio misto in cui elementi in conglomerato cementizio armato affiancano le pareti portanti in muratura, che presenta un piano di copertura piuttosto irregolare; il Corpo 4 dell’Ospedale di Castelfranco Emilia è un edificio in muratura, a pianta regolare che presenta le medesime irregolarità nel piano sommitale del precedente. I dati ottenuti hanno dimostrato un buon accordo per la quantificazione dell’indice di sicurezza per i modelli regolari e semplici con uno scarto di circa il 30% mentre il delta si incrementa per le strutture irregolari, in particolare quando le pareti portanti in muratura vengono sostituite da elementi puntuali nei piani di copertura arrivando a valori massimi del 60%. I confronti sono stati estesi per le tre strutture anche alla modellazione proposta dalle Linee Guida per la valutazione dell’indice di sicurezza sismica a scala territoriale LV1 mostrando differenze nell’ordine del 30% per il Padiglione Morselli e del 50% per il Liceo Marconi; il metodo semplificato risulta correttamente cautelativo. È, quindi, possibile affermare che tanto più gli edifici si mostrano regolari in riferimento a masse e rigidezze, tanto più la modellazione a telaio equivalente restituisce valori in accordo tra i programmi e di più immediata comprensione. Questa evidenza può essere estesa ad altri casi reali divenendo un vero e proprio criterio operativo che consiglia la suddivisione degli edifici esistenti in muratura, solitamente molto complessi poiché frutto di successive stratificazioni, in parti più semplici, ricorrendo alle informazioni acquisite attraverso il percorso della conoscenza che diviene in questo modo uno strumento utile e vitale. La complessità dell’edificato storico deve necessariamente essere approcciata in una maniera più semplice identificando sub unità regolari per percorso dei carichi, epoca e tecnologia costruttiva e comportamento strutturale dimostrato nel corso del tempo che siano più semplici da studiare. Una chiara comprensione del comportamento delle strutture permette di agire mediante interventi puntuali e meno invasivi, rispettosi dell’esistente riconducendo, ancora una volta, l’intervento di consolidamento ai principi propri del restauro che includono i principi di minimo intervento, di riconoscibilità dello stesso, di rispetto dei materiali esistenti e l’uso di nuovi compatibili con i precedenti. Il percorso della conoscenza diviene in questo modo la chiave per liberare la complessità degli edifici storici esistenti trasformando un mero tecnicismo in una concreta operazione culturale . Il presente percorso di dottorato è stato svolto in collaborazione tra l’Università di Parma, DICATeA e lo Studio di Ingegneria Melegari mediante un percorso di Apprendistato in Alta Formazione e Ricerca.

Nonlinear geometric and material computational technique : higher-order element with refined plastic hinge approach

This paper addresses of the advanced computational technique of steel structures for both simulation capacities simultaneously; specifically, they are the higher-order element formulation with element load effect (geometric nonlinearities) as well as the refined plastic hinge method (material nonlinearities). This advanced computational technique can capture the real behaviour of a whole second-order inelastic structure, which in turn ensures the structural safety and adequacy of the structure. Therefore, the emphasis of this paper is to advocate that the advanced computational technique can replace the traditional empirical design approach. In the meantime, the practitioner should be educated how to make use of the advanced computational technique on the second-order inelastic design of a structure, as this approach is the future structural engineering design. It means the future engineer should understand the computational technique clearly; realize the behaviour of a structure with respect to the numerical analysis thoroughly; justify the numerical result correctly; especially the fool-proof ultimate finite element is yet to come, of which is competent in modelling behaviour, user-friendly in numerical modelling and versatile for all structural forms and various materials. Hence the high-quality engineer is required, who can confidently manipulate the advanced computational technique for the design of a complex structure but not vice versa.

Numerical simulation of railway track supporting system using finite-infinite and thin layer elements under impulsive loads

The present study deals with two dimensional, numerical simulation of railway track supporting system subjected to dynamic excitation force. Under plane strain condition, the coupled finite-infinite elements to represent the near and far field stress distribution and thin layer interface element was employed to model the interfacial behavior between sleepers and ballast. To account for the relative debonding, slipping and crushing that could take place in the contact area between the sleepers and ballast, modified Mohr-Coulomb criterion was adopted. Furthermore an attempt has been made to consider the elasto-plastic material non-linearity of the railway track supporting media by employing different constitutive models to represent steel, concrete and supporting materials. Based on the proposed physical and constitutive modeling a code has been developed for dynamic loads. The applicability of the developed F.E code has been demonstrated by analyzing a real railway supporting structure.

Numerical modeling of railway track supporting system using finite–infinite and thin layer elements

The present contribution deals with the numerical modelling of railway track-supporting systems-using coupled finite-infinite elements-to represent the near and distant field stress distribution, and also employing a thin layer interface element to account for the interfacial behaviour between sleepers and ballast. To simulate the relative debonding, slipping and crushing at the contact area between sleepers and ballast, a modified Mohr-Coulomb criterion was adopted. Further more an attempt was made to consider the elasto plastic materials’ non-linearity of the railway track supporting media by employing different constitutive models to represent steel, concrete and other supporting materials. It is seen that during an incremental-iterative mode of load application, the yielding initially started from the edge of the sleepers and then flowed vertically downwards and spread towards the centre of the railway supporting system.

Web crippling tests of hollow flange channel beams with flanges fastened to supports under two flange load cases

Thin-walled steel hollow flange channel beams known as LiteSteel beam (LSB) sections were developed for use as joists and bearers in various flooring systems. However, they are subjected to specific buckling and failure modes, one of them being web crippling. Despite considerable research in this area, much of the current design predictions for cold-formed steel sections are not directly applicable to LSBs. This is due to the geometry of the LSB, which consists of two closed rectangular hollow flanges, and its unique residual stress characteristics and initial geometric imperfections. Hence an experimental study was conducted to investigate the web crippling behaviour and capacities of LSBs with their flanges fastened to supports. Thirty nine web crippling tests were conducted under two flange load cases (End Two Flange (ETF) and Interior Two Flange (ITF)). Test results showed that for ETF load case the web crippling capacities increased by 50% on average while they increased by 97% for ITF load case when flanges were fastened to supports. Comparison of the ultimate web crippling capacities from tests showed that AS/NZS 4600 and AISI S100 web crippling design equations are conservative for LSB sections with flanges fastened to supports under ETF and ITF load cases. Hence new equations were proposed to determine the web crippling capacities of LSBs with flanges fastened to supports. This paper presents the details of the experimental study into the web crippling behaviour of LSB sections with their flanges fastened under ETF and ITF load cases, and the results.

Comportamento à fadiga de juntas soldadas de aços tipo 460M com fios fluxados

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica