Estimation of atmospheric attenuation at 99 GHz using a total power radiometer

A total power radiometer operating at 99 GHz was implemented for a propagation experiment aimed to estimate attenuation along a slant path, in Madrid. Valuable data was collected during a measurement campaign in mid-april of 2012. The retrieved time series of radiometric attenuation allow the use of this technique at this frequency to be validated, under clear sky and cloudy conditions, using a low cost instrument calibrated with simple procedures. In spite of some hardware limitations, this experiment shows an interesting application of radiometric technique in order to study atmospheric propagation at 99 GHz.

Síntesis de series temporales de centelleo troposférico

Los sistemas de telecomunicación que trabajan en frecuencias milimétricas pueden verse severamente afectados por varios fenómenos atmosféricos, tales como la atenuación por gases, nubes y el centelleo troposférico. Una adecuada caracterización es imprescindible en el diseño e implementación de estos sistemas. El presente Proyecto Fin de Grado tiene como objetivo el estudio estadístico a largo plazo de series temporales de centelleo troposférico en enlaces de comunicaciones en trayecto inclinado sobre la banda Ka a 19,7 GHz. Para la realización de este estudio, se dispone como punto de partida de datos experimentales procedentes de la baliza en banda Ka a 19,7 GHz del satélite Eutelsat Hot Bird 13A que han sido recopilados durante siete años entre julio de 2006 y junio de 2013. Además, se cuenta como referencia teórica con la aplicación práctica del método UIT-R P.618-10 para el modelado del centelleo troposférico en sistemas de telecomunicación Tierra-espacio. Esta información permite examinar la validez de la aplicación práctica del método UIT-R P.1853-1 para la síntesis de series temporales de centelleo troposférico. Sobre este sintetizador se variará la serie temporal de contenido integrado de vapor de agua en una columna vertical por datos reales obtenidos de bases de datos meteorológicas ERA-Interim y GNSS con el objetivo de comprobar el impacto de este cambio. La primera parte del Proyecto comienza con la exposición de los fundamentos teóricos de los distintos fenómenos que afectan a la propagación en un enlace por satélite, incluyendo los modelos de predicción más importantes. Posteriormente, se presentan los fundamentos teóricos que describen las series temporales, así como su aplicación al modelado de enlaces de comunicaciones. Por último, se describen los recursos específicos empleados en la realización del experimento. La segunda parte del Proyecto se inicia con la muestra del proceso de análisis de los datos disponibles que, más tarde, permiten obtener resultados que caracterizan el centelleo troposférico en ausencia de precipitación, o centelleo seco, para los tres casos de estudio sobre los datos experimentales, sobre el modelo P.618-10 y sobre el sintetizador P.1853-1 con sus modificaciones. Al haber mantenido en todo momento las mismas condiciones de frecuencia, localización, clima y periodo de análisis, el estudio comparativo de los resultados obtenidos permite extraer las conclusiones oportunas y proponer líneas futuras de investigación. ABSTRACT. Telecommunication systems working in the millimetre band are severely affected by various atmospheric impairments, such as attenuation due to clouds, gases and tropospheric scintillation. An adequate characterization is essential in the design and implementation of these systems. This Final Degree Project aims to a long-term statistical study of time series of tropospheric scintillation on slant path communications links in Ka band at 19.7 GHz. To carry out this study, experimental data from the beacon in Ka band at 19.7 GHz for the Eutelsat Hot Bird 13A satellite are available as a starting point. These data have been collected during seven years between July 2006 and June 2013. In addition, the practical application of the ITU-R P.618-10 method for tropospheric scintillation modeling of Earth-space telecommunication systems has been the theoretical reference used. This information allows us to examine the validity of the practical application of the ITU-R P.1853-1 method for tropospheric scintillation time series synthesis. In this synthesizer, the time series of water vapor content in a vertical column will be substituted by actual data from meteorological databases ERA-Interim and GNSS in order to test the impact of this change. The first part of the Project begins with the exposition of the theoretical foundations of the various impairments that affect propagation in a satellite link, including the most important prediction models. Subsequently, it presents the theoretical foundations that describe the time series, and its application to communication links modeling. Finally, the specific resources used in the experiment are described. The second part of the Project starts with the exhibition of the data analysis process to obtain results that characterize the tropospheric scintillation in the absence of precipitation, or dry scintillation, for the three study cases on the experimental data, on the P.618-10 model and on the P.1853-1 synthesizer with its modifications. The fact that the same conditions of frequency, location, climate and period of analysis are always maintained, allows us to draw conclusions and propose future research lines by comparing the results.

Construcción modular ligera energéticamente eficiente

Esta tesis trata sobre la construcción modular ligera, dentro del contexto de la eficiencia energética y de cara a los conceptos de nZEB (near Zero Energy Building) y NZEB (Net Zero Energy Building) que se manejan en el ámbito europeo y específicamente dentro del marco regulador de la Directiva 2010/31 UE. En el contexto de la Unión Europea, el sector de la edificación representa el 40% del total del consumo energético del continente. Asumiendo la necesidad de reducir este consumo se han planteado, desde los organismos de dirección europeos, unos objetivos (objetivos 20-20-20) para hacer más eficiente el parque edificatorio. Estos objetivos, que son vinculantes en términos de legislación, comprometen a todos los estados miembros a conseguir la meta de reducción de consumo y emisiones de GEI (Gases de Efecto Invernadero) antes del año 2020. Estos conceptos de construcción modular ligera (CML) y eficiencia energética no suelen estar asociados por el hecho de que este tipo de construcción no suele estar destinada a un uso intensivo y no cuenta con unos cerramientos con niveles de aislamiento de acuerdo a las normativas locales o códigos de edificación de cada país. El objetivo de nZEB o NZEB, e incluso Energy Plus, según sea el caso, necesariamente (y así queda establecido en las normativas), dependerá no sólo de la mejora de los niveles de aislamiento de los edificios, sino también de la implementación de sistemas de generación renovables, independientemente del tipo de sistema constructivo con el que se trabaje e incluso de la tipología edificatoria. Si bien es cierto que los niveles de industrialización de la sociedad tecnológica actual han alcanzado varias de las fases del proceso constructivo - sobre todo en cuanto a elementos compositivos de los edificios- también lo es el hecho de que las cotas de desarrollo conseguidas en el ámbito de la construcción no llegan al nivel de evolución que se puede apreciar en otros campos de las ingenierías como la aeronáutica o la industria del automóvil. Aunque desde finales del siglo pasado existen modelos y proyectos testimoniales de construcción industrializada ligera (CIL) e incluso ya a principios del siglo XX, ejemplos de construcción modular ligera (CML), como la Casa Voisin, la industrialización de la construcción de edificios no ha sido una constante progresiva con un nivel de comercialización equiparable al de la construcción masiva y pesada. Los términos construcción industrializada, construcción prefabricada, construcción modular y construcción ligera, no siempre hacen referencia a lo mismo y no siempre son sinónimos entre sí. Un edificio puede ser prefabricado y no ser modular ni ligero y tal es el caso, por poner un ejemplo, de la construcción con paneles de hormigón prefabricado. Lo que sí es una constante es que en el caso de la construcción modular ligera, la prefabricación y la industrialización, casi siempre vienen implícitas en muchos ejemplos históricos y actuales. Con relación al concepto de eficiencia energética (nZEB o incluso NZEB), el mismo no suele estar ligado a la construcción modular ligera y/o ligera industrializada; más bien se le ve unido a la idea de cerramientos masivos con gran inercia térmica propios de estándares de diseño como el Passivhaus; y aunque comúnmente a la construcción ligera se le asocian otros conceptos que le restan valor (corta vida útil; función y formas limitadas, fuera de todo orden estético; limitación en los niveles de confort, etc.), los avances que se van alcanzando en materia de tecnologías para el aprovechamiento de la energía y sistemas de generación renovables, pueden conseguir revertir estas ideas y unificar el criterio de eficiencia + construcción modular ligera. Prototipos y proyectos académicos– como el concurso Solar Decathlon que se celebra desde el año 2002 promovido por el DOE (Departamento de Energía de los Estados Unidos), y que cuenta con ediciones europeas como las de los años 2010 y 2012, replantean la idea de la construcción industrializada, modular y ligera dentro del contexto de la eficiencia energética, con prototipos de viviendas de ± 60m2, propuestos por las universidades concursantes, y cuyo objetivo es alcanzar y/o desarrollar el concepto de NZEB (Net Zero Energy Building) o edificio de energía cero. Esta opción constructiva no sólo representa durabilidad, seguridad y estética, sino también, rapidez en la fabricación y montaje, además de altas prestaciones energéticas como se ha podido demostrar en las sucesivas ediciones del Solar Decathlon. Este tipo de iniciativas de desarrollo de tecnologías constructivas, no sólo apuntan a la eficiencia energética sino al concepto global de energía neta, Energía plus o cero emisiones de CO2. El nivel de emisiones por la fabricación y puesta en obra de los materiales de construcción depende, en muchos casos, no solo de la propia naturaleza del material, sino también de la cantidad de recursos utilizados para producir una unidad de medida determinada (kg, m3, m2, ml, etc). En este sentido podría utilizarse, en muchos casos, el argumento válido de que a menos peso, y a menos tamaño, menos emisiones globales de gases de efecto invernadero y menos contaminación. Para el trabajo de investigación de esta tesis se han tomado como referencias válidas para estudio, prototipos tanto de CML (Modular 3D) como de CIL (panelizado y elementos 2D), dado que para los fines de análisis de las prestaciones energéticas de los materiales de cerramiento, ambos sistemas son equiparables. Para poder llegar a la conclusión fundamental de este trabajo de tesis doctoral - que consiste en demostrar la viabilidad tecnológica/ industrial que supone la combinación de la eficiencia energética y la construcción modular ligera - se parte del estudio del estado de la técnica ( desde la selección de los materiales y los posibles procesos de industrialización en fábrica, hasta su puesta en obra, funcionamiento y uso, bajo los conceptos de consumo cero, cero emisiones de carbono y plus energético). Además -y con un estado de la técnica que identifica la situación actual- se llevan a cabo pruebas y ensayos con un prototipo a escala natural y células de ensayo, para comprobar el comportamiento de los elementos compositivos de los mismos, frente a unas condicionantes climáticas determinadas. Este tipo de resultados se contrastan con los obtenidos mediante simulaciones informáticas basadas en los mismos parámetros y realizadas en su mayoría mediante métodos simplificados de cálculos, validados por los organismos competentes en materia de eficiencia energética en la edificación en España y de acuerdo a la normativa vigente. ABSTRACT This thesis discusses lightweight modular construction within the context of energy efficiency in nZEB (near Zero Energy Building) and NZEB (Net Zero Energy Building) both used in Europe and, specifically, within the limits of the regulatory framework of the EU Directive 2010/31. In the European Union the building sector represents 40% of the total energy consumption of the continent. Due to the need to reduce this consumption, European decision-making institutions have proposed aims (20-20-20 aims) to render building equipment more efficient. These aims are bound by law and oblige all member States to endeavour to reduce consumption and GEI emissions before the year 2020. Lightweight modular construction concepts and energy efficiency are not generally associated because this type of building is not normally meant for intensive use and does not have closures with insulation levels which fit the local regulations or building codes of each country. The objective of nZEB or NZEB and even Energy Plus, depending on each case, will necessarily be associated (as established in the guidelines) not only with the improvement of insulation levels in buildings, but also with the implementation of renewable systems of generation, independent of the type of building system used and of the building typology. Although it is true that the levels of industrialisation in the technological society today have reached several of the building process phases - particularly in the composite elements of buildings - it is also true that the quotas of development achieved in the area of construction have not reached the evolutionary levelfound in other fields of engineering, such as aeronautics or the automobile industry. Although there have been models and testimonial projects of lightweight industrialised building since the end of last century, even going back as far as the beginning of the XX century with examples of lightweight modular construction such as the Voisin House, industrialisation in the building industry has not been constant nor is its comercialisation comparable to massive and heavy construction. The terms industrialised building, prefabricated building, modular building and lightweight building, do not always refer to the same thing and they are not always synonymous. A building can be prefabricated yet not be modular or lightweight. To give an example, this is the case of building with prefabricated concrete panels. What is constant is that, in the case of lightweight modular construction, prefabrication and industrialisation are almost always implicit in many historical and contemporary examples. Energy efficiency (nZEB or even NZEB) is not normally linked to lightweight modular construction and/or industrialised lightweight; rather, it is united to the idea of massive closureswith high thermal inertia typical of design standards such as the Passive House; and although other concepts that subtract value from it are generally associated with lightweight building (short useful life, limited forms and function, inappropriate toany aesthetic pattern; limitation in comfort levels, etc.), the advances being achieved in technology for benefitting from energy and renewable systems of generation may well reverse these ideas and unify the criteria of efficiency + lightweight modular construction. Academic prototypes and projects - such as the Solar Decathlon competition organised by the US Department of Energy and celebrated since 2002, with its corresponding European events such as those held in 2010 and 2012, place a different slant on the idea of industrialised, modular and lightweight building within the context of energy efficiency, with prototypes of homes measuring approximately 60m2, proposed by university competitors, whose aim is to reach and/or develop the NZEB concept, or the zero energy building. This building option does not only signify durability, security and aesthetics, but also fast manufacture and assembly. It also has high energy benefits, as has been demonstrated in successive events of the Solar Decathlon. This type of initiative for the development of building technologies, does not only aim at energy efficiency, but also at the global concept of net energy, Energy Plus and zero CO2 emissions. The level of emissions in the manufacture and introduction of building materials in many cases depends not only on the inherent nature of the material, but also on the quantity of resources used to produce a specific unit of measurement (kg, m3, m2, ml, etc.). Thus in many cases itcould be validly arguedthat with less weight and smaller size, there will be fewer global emissions of greenhouse effect gases and less contamination. For the research carried out in this thesis prototypes such as the CML (3D Module) and CIL (panelled and elements) have been used as valid study references, becauseboth systems are comparablefor the purpose of analysing the energy benefits of closure materials. So as to reach a basic conclusion in this doctoral thesis - that sets out to demonstrate the technological/industrial viability of the combination of energy efficiency and lightweight modular construction - the departure point is the study of the state of the technique (from the selection of materials and the possible processes of industrialisation in manufacture, to their use on site, functioning and use, respecting the concepts of zero consumption, zero emissions of carbon and Energy Plus). Moreover, with the state of the technique identifying the current situation, tests and practices have been carried out with a natural scale prototype and test cells so as to verify the behaviour of the composite elements of these in certain climatic conditions. These types of result are contrasted with those obtained through computer simulation based on the same parameters and done, principally, using simplified methods of calculation, validated by institutions competent in energy efficiency in Spanish building and in line with the rules in force.

Peronismo, dictadura y universidades privadas en la Argentina de los años 70

A partir del análisis de normativas universitarias, bibliografía especializada y fundamentalmente fuentes documentales y testimoniales, este artículo aborda la trama del sector universitario privado durante el complejo interregno que significaron los años setentas para la historia reciente Argentina. Observaremos que tras el reingreso del peronismo al poder del Estado en 1973, la alta sustentabilidad adquirida por el sector en años anteriores fue puesta en jaque: conflictos estudiantiles, intervenciones políticas y un crecimiento institucional refrenado, fueron algunos de sus rasgos distintivos. En cuanto a la última dictadura militar (1976-1983), abrió una contradictoria etapa de desarrollo para las universidades privadas. Pese a la alternancia de católicos conservadores en el área educativa y al sesgo privatista identificado como un hito del modelo económico implementado, el sector privado resultó contraído en el marco del avasallamiento más brutal del sistema universitario en su conjunto. Sin embargo, algunas universidades católicas resultaron beneficiadas con importantes estímulos económicos.

Qānūnchah fī al-ṭibb, [880, i.e. 1475 or 1476].

Fine copy of al-Jaghmīnī's (d.1344) Qānūnchah, a compendium on medicine and an extract from Ibn Sīnā’s Qānūn. Brockelmann treats this author as distinct from an astronomer of the same name who died in 1221.

Adsorption of benzene on graphitized thermal carbon black: Reduction of the quadrupole moment in the adsorbed phase

The performance of intermolecular potential models on the adsorption of benzene on graphitized thermal carbon black at various temperatures is investigated. Two models contain only dispersive sites, whereas the other two models account explicitly for the dispersive and electrostatic sites. Using numerous data in the literature on benzene adsorption on graphitized thermal carbon black at various temperatures, we have found that the effect of surface mediation on interaction between adsorbed benzene molecules must be accounted for to describe correctly the adsorption isotherm as well as the isosteric heat. Among the two models with partial charges tested, the WSKS model of Wick et at. I that has only six dispersive sites and three discrete partial charges is better than the very expensive all-atom model of Jorgensen and Severance.(2) Adsorbed benzene molecules on graphitized thermal carbon black have a complex orientation with respect to distance from the surface and also with respect to loading. At low loadings, they adopt the parallel configuration relative to the graphene surface, whereas at higher loadings (still less than monolayer coverage) some molecules adopt a slant orientation to maximize the fluid-fluid interaction. For loadings in the multilayer region, the orientation of molecules in the first layer is influenced by the presence of molecules in the second layer. The data that are used in this article come from the work of Isirikyan and Kiselev,(3) Pierotti and Smallwood,(4) Pierce and Ewing,(5) Belyakova, Kiselev, and Kovaleva,(6) and Carrott et al.(7)

Amodal completion with background determines depth from monocular gap stereopsis

Grove, Gillam, and Ono [Grove, P. M., Gillam, B. J., & Ono, H. (2002). Content and context. of monocular regions determine perceived depth in random dot, unpaired background and phantom stereograms. Vision Research, 42, 1859-1870] reported that perceived depth in monocular gap stereograms [Gillam, B. J., Blackburn, S., & Nakayama, K. (1999). Stereopsis based on monocular gaps: Metrical encoding of depth and slant without matching contours. Vision Research, 39, 493-502] was attenuated when the color/texture in the monocular gap did not match the background. It appears that continuation of the gap with the background constitutes an important component of the stimulus conditions that allow a monocular gap in an otherwise binocular surface to be responded to as a depth step. In this report we tested this view using the conventional monocular gap stimulus of two identical grey rectangles separated by a gap in one eye but abutting to form a solid grey rectangle in the other. We compared depth seen at the gap for this stimulus with stimuli that were identical except for two additional small black squares placed at the ends of the gap. If the squares were placed stereoscopically behind the rectangle/gap configuration (appearing on the background) they interfered with the perceived depth at the gap. However when they were placed in front of the configuration this attenuation disappeared. The gap and the background were able under these conditions to complete amodally. (c) 2006 Elsevier Ltd. All rights reserved.

From detection of complex motion to descriptions of moving surfaces in human vision

A preliminary study by Freeman et al (1996b) has suggested that when complex patterns of motion elicit impressions of 2-dimensionality, odd-item-out detection improves given targets can be differentiated on the basis of surface properties. Their results can be accounted for, it if is supposed that observers are permitted efficient access to 3-D surface descriptions but access to 2-D motion descriptions is restricted. To test the hypothesis, a standard search technique was employed, in which targets could be discussed on the basis of slant sign. In one experiment, slant impressions were induced through the summing of deformation and translation components. In a second theory were induced through the summing of shear and translation components. Neither showed any evidence of efficient access. A third experiment explored the possibility that access to these representations may have been hindered by a lack of grouping between the stimuli. Attempts to improve grouping failed to produce convincing evidence in support of life. An alternative explanation is that complex patterns of motion are simply not processed simultaneously. Psychophysical and physiological studies have, however, suggested that multiple mechanisms selective for complex motion do exist. Using a subthreshold summation technique I found evidence supporting the notion that complex motions are processed in parallel. Furthermore, in a spatial summation experiment, coherence thresholds were measured for displays containing different numbers of complex motion patches. Consistent with the idea that complex motion processing proceeds in parallel, increases in the number of motion patches were seen to decrease thresholds, both for expansion and rotation. Moreover, the rates of decrease were higher than those typically expected from probability summation, thus implying mechanisms are available, which can pool signals from spatially distinct complex motion flows.

Educational Model of Computer as a Base for Informatics Learning

It is proposed to use one common model of computer for teaching different parts of the informatics course, connected with both hardware and software subjects. Reasoning of such slant is presented; the most suitable themes of the course, where it is practical, are enumerated. The own author's development (including software support) – the educational model of virtual computer "E97" and compiler from Pascal language for it – are described. It is accented, that the discussed ideas are helpful for any other similar model.

Encouraging the intellectual craft of living research:tattoos, theory and time

This chapter contributes to the anthology on learning to research - researching to learn because it emphases a need to design curricula that enables living research, and on-going researcher development, rather than one that restricts student and staff activities, within a marketised approach towards time. In recent decades higher education (HE) has come to be valued for its contribution to the global economy. Referred to as the neo-liberal university, a strong prioritisation has been placed on meeting the needs of industry by providing a better workforce. This perspective emphasises the role of a degree in HE to secure future material affluence, rather than to study as an on-going investment in the self (Molesworth , Nixon & Scullion, 2009: 280). Students are treated primarily as consumers in this model, where through their tuition fees they purchase a product, rather than benefit from the transformative potential university education offers for the whole of life.Given that HE is now measured by the numbers of students it attracts, and later places into well-paid jobs, there is an intense pressure on time, which has led to a method where the learning experiences of students are broken down into discrete modules. Whilst this provides consistency, students can come to view research processes in a fragmented way within the modular system. Topics are presented chronologically, week-by-week and students simply complete a set of tasks to ‘have a degree’, rather than to ‘be learners’ (Molesworth , Nixon & Scullion, 2009: 277) who are living their research, in relation to their own past, present and future. The idea of living research in this context is my own adaptation of an approach suggested by C. Wright Mills (1959) in The Sociological Imagination. Mills advises that successful scholars do not split their work from the rest of their lives, but treat scholarship as a choice of how to live, as well as a choice of career. The marketised slant in HE thus creates a tension firstly, for students who are learning to research. Mills would encourage them to be creative, not instrumental, in their use of time, yet they are journeying through a system that is structured for a swift progression towards a high paid job, rather than crafted for reflexive inquiry, that transforms their understanding throughout life. Many universities are placing a strong focus on discrete skills for student employability, but I suggest that embedding the transformative skills emphasised by Mills empowers students and builds their confidence to help them make connections that aid their employability. Secondly, the marketised approach creates a problem for staff designing the curriculum, if students do not easily make links across time over their years of study and whole programmes. By researching to learn, staff can discover new methods to apply in their design of the curriculum, to help students make important and creative connections across their programmes of study.

Re-visualising international relations:audio-visual projects and direct encounters with the political in security studies

In this paper we discuss how an innovative audio-visual project was adopted to foster active, rather than declarative learning, in critical International Relations (IR). First, we explore the aesthetic turn in IR, to contrast this with forms of representation that have dominated IR scholarship. Second, we describe how students were asked to record short audio or video projects to explore their own insights through aesthetic and non-written formats. Third, we explain how these projects are understood to be deeply embedded in social science methodologies. We cite our inspiration from applying a personal sociological imagination, as a way to counterbalance a ‘marketised’ slant in higher education, in a global economy where students are often encouraged to consume, rather than produce knowledge. Finally, we draw conclusions in terms of deeper forms of student engagement leading to new ways of thinking and presenting new skills and new connections between theory and practice.

Peronismo, dictadura y universidades privadas en la Argentina de los años 70

A partir del análisis de normativas universitarias, bibliografía especializada y fundamentalmente fuentes documentales y testimoniales, este artículo aborda la trama del sector universitario privado durante el complejo interregno que significaron los años setentas para la historia reciente Argentina. Observaremos que tras el reingreso del peronismo al poder del Estado en 1973, la alta sustentabilidad adquirida por el sector en años anteriores fue puesta en jaque: conflictos estudiantiles, intervenciones políticas y un crecimiento institucional refrenado, fueron algunos de sus rasgos distintivos. En cuanto a la última dictadura militar (1976-1983), abrió una contradictoria etapa de desarrollo para las universidades privadas. Pese a la alternancia de católicos conservadores en el área educativa y al sesgo privatista identificado como un hito del modelo económico implementado, el sector privado resultó contraído en el marco del avasallamiento más brutal del sistema universitario en su conjunto. Sin embargo, algunas universidades católicas resultaron beneficiadas con importantes estímulos económicos.

Memória autobiográfica em jovens adultos com comportamentos suicidários

2008 Dissertação de Mestrado apresentada no Instituto Superior de Psicologia Aplicada para a obtenção de grau de Mestre na especialidade de Psicologia Clínica

CON EL TRATADO DE LIBRE COMERCIO PERDIMOS TOD@S

Resumen El objetivo principal de este artículo es analizar la inserción de la economía guatemalteca al proceso del desarrollo global del sistema capitalista. El trabajo sustenta la idea de que la estructura productiva se fue configurando a partir de los procesos de ajuste estructural y que la misma tuvo un sesgo marcadamente neoliberal. Esto permitió generar una plataforma política y económica que facilito la imposición de un modelo dependiente con la instauración de un Acuerdo Comercial con Estados Unidos. Este mecanismo es la última fase de la implantación del modelo económico de acumulación, que permite una inserción del capital nacional al gran mercado capitalista mundial y reconfigura la estructura productiva agrícola del país adaptándola a las nuevas necesidades del capital global.   Abstract The Objective of this article is analyzing the insertion of the Guatemalan economy to process of world development of capitalist system. The work support the idea of the productive structure was forming to begin of structures adjustments process and had a slant markedly neoliberal. It allowed produce a politic platform and economic that made easy the imposition of a dependent model with the establishment of one trade agreement with United States. It mechanism is the last stage of the implantation of economic model of accumulation, that allow a insertion of national working capital to big world capitalist market and reforming the farming productive structure of Guatemala; adjustmenting the country to the new necessities of world working capital.

Une mémoire oublieuse : théorie et pratique de l'énonciation de l'acteur chez Larry Tremblay, Daniel Danis et Christian Lapointe

Prenant appui sur l’occultation de la mémoire verbale par la théorie théâtrale actuelle, le présent mémoire questionne l’exercice mémoriel des acteurs contemporains à partir de la dialectique mémoire/oubli dans les théories et pratiques de l’énonciation de Larry Tremblay, de Daniel Danis et de Christian Lapointe. Le premier chapitre s’intéresse aux fondements de l’énonciation privilégiés par les praticiens dans leurs discours théoriques – Le crâne des théâtres (Tremblay), « La mémoire intime au théâtre » (Danis), « Petit guide de l’apparition à l’usage de ceux qu’on ne voit pas » (Lapointe) –, plus précisément à la valeur accordée à la mémorisation verbale. Le deuxième s’attache à montrer que les textes dramatiques des auteurs-metteurs en scène – The Dragonfly of Chicoutimi (Tremblay), Mille anonymes (Danis), Sepsis (Lapointe) – engagent aussi un rapport oblique à l’apprentissage par cœur. Enfin, le troisième cherche à définir la notion de mémoire oublieuse à la lumière de laquelle les théories et les pratiques de Tremblay, de Danis et de Lapointe peuvent être analysées ainsi qu’à en identifier certaines conséquences dans leurs mises en scène.