Design, development, and analysis of hybrid metal-composite tube for industrial application

In the aerospace, automotive, printing, and sports industries, the development of hybrid Carbon Fiber Reinforced Polymer (CFRP)-metal components is becoming increasingly important. The coupling of metal with CFRP in axial symmetric components results in reduced production costs and increased mechanical properties such as bending, torsional stiffness, mass reduction, damping, and critical speed compared to the single material-built ones. In this thesis, thanks to a novel methodology involving a rubbery/viscoelastic interface layer, several hybrid aluminum-CFRP prototype tubes were produced. Besides, an innovative system for the cure of the CFRP part has been studied, analyzed, tested, and developed in the company that financed these research activities (Reglass SRL, Minerbio BO, Italy). The residual thermal stresses and strains have been investigated with numerical models based on the Finite Element Method (FEM) and compared with experimental tests. Thanks to numerical models, it was also possible to reduce residual thermal stresses by optimizing the lamination sequence of CFRP and determining the influence of the system parameters. A novel software and methodology for evaluating mechanical and damping properties of specimens and tubes made in CFRP were also developed. Moreover, to increase the component's damping properties, rubber nanofibers have been produced and interposed throughout the lamination of specimens. The promising results indicated that the nanofibrous mat could improve the material damping factor over 77% and be adopted in CFRP components with a negligible increment of weight or losing mechanical properties.

Vibro-acoustic analysis and design optimization to improve comfort and sustainability of future passenger aircraft

Due to the interest of general public and the industrial stakeholders, new challenges and demands are rising in aircraft design. The sustainability is taking its place amongst more traditional design factors, such as safety, performances and costs. Sustainability is both environmental and economic, and among the factors contributing to economic sustainability, there is also passengers' comfort. In order to win these two challenges, they must be considered in the early stages of aircraft design. In this work, the focus is on emissions generation and acoustic comfort, aiming at reducing pollution and internal noise in the preliminary design phases. These results can be achieved with both unconventional aircraft configurations and advanced materials, which also require new numerical formulations to be assessed. In this research, on one hand, the windowless configuration for a commercial aircraft is studied with traditional preliminary design methods in order to achieve a weight reduction and consequently a return in terms of emissions and costs. On the other hand, a new class of insulating materials, the acoustic metamaterials, is applied on the passenger cabin lining panels. The complex kinematic behaviour of these advanced materials is studied through the Carrera's Unified Formulation, that enhances a wide class of powerful refined shell and beam theories with a unique formulation.

Analyzing the n→π* Electronic Transition of Formaldehyde in Water. A Sequential Monte Carlo/Time-Dependent Density Functional Theory

The n→π* absorption transition of formaldehyde in water is analyzed using combined and sequential classical Monte Carlo (MC) simulations and quantum mechanics (QM) calculations. MC simulations generate the liquid solute-solvent structures for subsequent QM calculations. Using time-dependent density functional theory in a localized set of gaussian basis functions (TD-DFT/6-311++G(d,p)) calculations are made on statistically relevant configurations to obtain the average solvatochromic shift. All results presented here use the electrostatic embedding of the solvent. The statistically converged average result obtained of 2300 cm-1 is compared to previous theoretical results available. Analysis is made of the effective dipole moment of the hydrogen-bonded shell and how it could be held responsible for the polarization of the solvent molecules in the outer solvation shells.

A positional FEM Formulation for geometrical non-linear analysis of shells

This work presents a fully non-linear finite element formulation for shell analysis comprising linear strain variation along the thickness of the shell and geometrically exact description for curved triangular elements. The developed formulation assumes positions and generalized unconstrained vectors as the variables of the problem, not displacements and finite rotations. The full 3D Saint-Venant-Kirchhoff constitutive relation is adopted and, to avoid locking, the rate of thickness variation enhancement is introduced. As a consequence, the second Piola-Kirchhoff stress tensor and the Green strain measure are employed to derive the specific strain energy potential. Curved triangular elements with cubic approximation are adopted using simple notation. Selected numerical simulations illustrate and confirm the objectivity, accuracy, path independence and applicability of the proposed technique.

Trap-nesting bees (Hymenoptera: Apoidea) in forest fragments of the State of Sao Paulo, Brazil

We studied the community ecology of trap-nesting bees in two forest fragments of the State of Sao Paulo, Brazil, during two years, utilizing bamboo canes and tubes made of black cardboard as trap nests. The traps were inspected once a month with an otoscope. One hundred and fifteen nests were obtained at Estacao Ecologica de Paulo de Faria, Paulo de Faria (EEPF). These included nine species belonging to five genera and two families. At Santa Cecilia Farm (SCF), 12 species belonging to seven genera and three families built 392 nests. Natural enemies reared from nests of both areas included Hymenoptera, Diptera and Coleoptera. Species richness was similar between the areas but the communities differed considerably in species composition. The higher diversity found at EEPF was due to more even distribution of the species. No difference was observed between the numbers of nests built in each year in each area. Although the species richness was lower in the cool/dry season of both years at SCF, and in the first year at EEPF, the nesting frequencies did not differ between seasons for both the overall community but for each of the most abundant species. No annual fluctuation in the frequencies of nesting was observed. As temperature and precipitation were not found to be significantly different between the two years of study in each area, we concluded that climatic stability resulted in population stability.

Mechanical behavior of prosthesis in Toucan beak (Ramphastos toco)

The purpose of this study is to characterize the structure of the beak of Toco Toucan (Ramphastos toco) and to investigate means for arresting fractures in the rhinotheca using acrylic resin. The structure of the rhamphastid bill has been described as a sandwich structured composite having a thin exterior comprised of keratin and a thick foam core constructed of mineralized collagenous rods (trabeculae). The keratinous rhamphotheca consists of superposed polygonal scales (approximately 50 pm in diameter and 1 mu m in thickness). In order to simulate the orientation of loading to which the beak is subjected during exertion of bite force, for example, we conducted flexure tests on the dorso-ventral axis of the maxilla. The initially intact (without induced fracture) beak fractured in the central portion when subjected to a force of 270 N, at a displacement of 23 mm. The location of this fracture served as a reference for the fractures induced in other beaks tested. The second beak was fractured and repaired by applying resin on both lateral surfaces. The repaired maxilla sustained a force of 70 N with 6.5 mm deflection. The third maxilla was repaired similarly except that it was conditioned in acid for 60s prior to fixation with resin. It resisted a force of up to 63 N at 6 mm of deflection. The experimental results were compared with finite element calculations for unfractured beak in bending configuration. The repaired specimens were found to have strength equal to only one third of the intact beak. Finite element simulations allow visualization of how the beak system (sandwich shell and cellular core) sustains high flexural strength. (C) 2010 Elsevier B.V. All rights reserved.

Maturation studies of pecan nuts grown in Queensland

Changes in chemical composition, physical and sensory characteristics were followed in two pecan cultivars Wichita and Western Schley harvested from a commercial orchard at Gatton in Queensland seven times during 1996. Testa colour of both pecan cultivars darkened and opalescence decreased as the nuts matured. Bitterness of Western Schley pecans decreased with maturity. Colour of shuck, shell and kernel of both cultivars developed as the nuts matured. Wichita pecans were larger than Western Schley at all harvest times. Both nut-in-shell and kernel moisture decreased with maturity, whereas oil and sucrose contents increased. Both pecan cultivars had reached advanced maturation by the first harvest on March 18.

O complexo Myosotella 'myosotis/denticulata': uma perspetiva morfológica, molecular e ecológica

Dissertação de Mestrado, Biodiversidade e Ecologia Insular, 29 de Maio de 2013, Universidade dos Açores.

Estudo de optimização energética da unidade 1400

O estudo de optimização energética da Unidade 1400 da Fábrica de Combustíveis da Refinaria de Matosinhos da Galp Energia foi realizado com base no projecto de revamping elaborado pela AXENS, devido à existência de dúvidas (Galp Energia) de que aquele projecto não estivesse, do ponto de vista energético, totalmente rentabilizado. Para a consecução deste estudo, foi aplicado o conceito Pinch (Ponto de Estrangulamento), recorrendo-se quer a software dedicado disponível (ASPEN Energy Analyser), quer ao cálculo da Cascata de Calor. Os resultados obtidos em definitivo foram-no através deste último, tendo servido o primeiro apenas como indicador, devido à existência de incoerências (pelo menos aparentes). Foram considerados três cenários, tendo apenas como elemento diferenciador o valor de ΔTmin: 10, 15 e 20 oC. Foi detectado, somente para este último (20 oC), um ponto de estrangulamento. Os três cenários concordam na necessidade de inclusão de um novo permutador de calor entre a corrente de gasóleo após sofrer reacção de hidrogenação (fundo do reactor) e após dois estágios de arrefecimento e a corrente de gasóleo à entrada da Unidade e após recepção do reciclo de hidrogénio, constituindo assim a sua fonte inicial de aquecimento. Como consequência, também são reduzidas as necessidades de serviço da fornalha pré-reactor e das utilidades de arrefecimento. Para o cálculo do novo permutador de calor, seguiram-se duas vias: carcaça e tubos convencional e carcaça e tubos com disposição helicoidal das chicanas (Helixchanger®). Para o primeiro tipo, recorreu-se ao software ASPEN Exchanger Design & Rating, sendo, para o segundo, a empresa detentora da tecnologia (Lummus Technology) a fornecer a solução pretendida. Procedeu-se a um breve estudo de rentabilidade económica do investimento em causa, considerando o seu maior valor (Helixchanger®), sendo o resultado favorável à sua aplicação.

First Curl, Then Wrinkle

The excellent properties of elastomers are exploited to trigger wrinkling instabilities in curved shells. Micro- and nano-fibres are produced by electrospinning and UV irradiated: each fibre consists of a soft core and a stiff outer half-shell. Upon solvent de-swelling, the fibres curl because the shell and the core have different natural lengths. Wrinkling only starts after the fibre has attained a well-defined helical shape. A simple analytical model is proposed to find the curling curvature and wrinkle wavelength, as well as the transition between the “curling” and “wrinkling” regimes. This new instability resembles that found in the tendrils of climbing plants as they dry and lignify.

Produção de bioplásticos a partir de agro-resíduos

Dissertação de mestrado integrado em Engenharia de Materiais

Ontogenetic variation of plastral spotting pattern in Phrynops hilarii (Testudines, Chelidae)

The plastral spotting variation in the chelid turtle Phrynops hilarii (Duméril & Bibron, 1835) in relation to sex, size, and geographic procedence of individuals was analyzed. States for qualitative characters were analyzed using non-parametric tests. Quantitative characters (shell and scute measurements) were standardized for body size by linear regression against carapace length, and were subjected to principal components analysis and canonical discriminant function analysis. Results suggest that increased plastral spotting is a polymorphic ontogenetic trait in P. hilarii. Neither hatchlings nor juveniles have plastral pattern moderately or heavily pigmented. The simplest pattern, however, may persist without changes in some adults. There are no differences between sexes. The spatial distribution of the plastral pattern is not ordered latitudinally or longitudinally, showing no relationship with gradients of elevation, temperature, or precipitation. This pattern trait lacks of taxonomic significance. The morphometric analysis failed to reveal any character of diagnostic utility in the plastron to support the possibility that these patterns correspond to different sympatric taxa.

A new species of Leiostracus from Bahia, Brazil (Gastropoda, Pulmonata, Orthalicidae)

A remarkable new species of pulmonate snail was recently collected in a small Atlantic Rainforest fragment near the city of Canavieiras, state of Bahia, Brazil, an area known for a high diversity of land snails. It is described herein as Leiostracus fetidus sp. nov. and can be easily identified by its color pattern of irregular brown to black axial stripes on a white to yellow background, a reddish axial band "separating" the white peristome from the rest of the shell and a broad brown spiral band surrounding the umbilical region. Other diagnostic features include a relatively small size, a proto columellar fold and two very weak folds delimiting the basal region of the aperture. This discovery is a reminder of how little this fauna is known and also an alarm for proper conservation of these forest fragments.

Observations on the morphology of Australorbis nigricans

A morphological study was done on A. nigricans, based on the observation of shell, radula, renal region and genitalia of 50 specimens measuring 18 mm in diameter. The data obtained are to be compared with those recorded in our previous paper (PARAENSE & DESLANDES, 1955) on A. glabratus. The characteristics common to both species will not be mentioned here. The numerals refere to the means and their standard deviations: no special reference being done, they correspond to length measurementes. Shell - 18 mm in diameter, 6.37 ± 0.29 mm in greatest width, 6 whorls. Prevailing colur ferruginous sepia, a minority of olivaceous, ochreous, nigrescent and deeply black specimens being found. Right side variously depressed, umbilicated, 1.5 to 3.5 mm deep from the bottom of the umblicus to the highest level of the last whorl. Left side more depressed than the right one, broadly concave, 1.5 to 3.5 mm deep. Both sides show a varously distinct keel, that looks sharper at the left. Aperture deltoid, varying in outline and width. Body, extended - 60.26 ± 3.62 mm, less pigmented than in glabratus. Renal tube - 30.68 ± 1.69 mm, showing neither ridge nor pigmented line along its ventral surface, this negative character affording a sure means of separation from glabratus. Ovotestis - 14.48 ± 1.93 mm. Ovisperm duct - 13.04 ± 1.60 mm, including the non-unwound seminal vesicle. The latter was 0.97 ± 0,21 mm in greatest width. Carrefour - Resembling that of glabratus. Sperm duct - 21.36 ± 1.53 mm. Prostate - Prostate duct 7.14 ± 0.74 mm, collecting a row of long diverticula numbering 19.6 ± 3.1 and more separate than in glabratus. Last diverticulum generally bifurcate or arborescent, the remaining ones arborescent. Vas deferens - 28.68 ± 1.38. Ratio vas deferens/vergic sac = 6.8±0.8. Verge - 3.08 ± 0.28 mm long, 0.11 ± 0.02 mm wide. Vergic sac - 3.07 ± 0.28 mm long, about 0.20 mm wide. Ratio vergic sac/preputium = 0.84 ± 0.12. Preputium - 3.69 ± 0.47 mm long, 0.85 ± 0.10 mm wide. Albumen gland - Resembling taht of glabratus. Oviduct - 16.26 ± 1.41 mm, swollen at the cephalic end. Uterus - 13.24 ± 1.19 mm. Vagina - 1.70 ± 0.22 mm, swolen at the caudal portion. Spermatheca - 2.78 ± 0.40 mm long, 0.86 ± 0.16 mm wide. Spermathecal duct 1.11 ± 0.20 mm. Radula - 125 to 168 horizontal rows of teeth (mean 153.9 ± 8.4). Radula formula 28-1-28 to 36-1-36 (mean 31.8 ± 1.9). Mode formula 31-1-31. The morphological characteristics of the renal region and shell, and the great body length in the same condition of shell diameter, distinguish A. nigricans from the most related species A. glabratus, giving support to considering it a good species from a txonomic or phenotypic standpoint (morphospecies).

Biomphalaria occidentalis sp.n. from South America (Mollusca basommatophora pulmonata)

A new species of South American planorbid snail, Biomphalaria occidentalis, is described. It is indistinguishable from B. tenagophila (Orbigny, 1835), by the characteristics of the shell and of most organs of the genital system. In B. tenagophila there is a pouch on the ventral wall of the vagina (Fig. 4A, vp), absent in B. occidentalis (Fig. 3A), and on the ventral wall of the vagina (Fig. 4A, vp), absent in B. occidentalis (Fig. 3A), and the prepuce is much wider than the penial sheath, its width increasing distalward (Fig. 4, ps,pp), whereas in B. occidentalis the prepuce is wider than the penial sheath but keeps about the same width all along (Fig.3, ps, pp). The two species are biologically separate by absolute reproductive isolation. The geographical distribution of B. occidentalis is shown in Fig. 14. So far it has been found in the Brazilian states of Acre, Amazonas (?), Mato Grosso, Mato Grosso do Sul and Paraná, and in Paraguay. Its type-locality is Campo Grande, state of Mato Grosso do sul, where it was collected from several biotopes related to affluents of the Aquiduana river, chiefly Córrego Prosa and Córrego Ceroula. Specimens were deposited in the following malacological collections: Instituto Oswaldo Cruz, Rio de Janeiro; Academy of Natural Sciences, Philadelphia; Museum of Zoology, University of Michigan; and British Museum (Natural History).