1000 resultados para Setor de gás e petróleo


Relevância:

40.00% 40.00%

Publicador:

Resumo:

The dissertation has by objective describe the administrative activity of regulation exercised by independent regulatory agencies, observing that this activity was already done before this structures creation, however, after a really deep administrative reform that had as objective built a Public Administration with more efficiency, it passed to be done with some own peculiarities of these new structures of regulation. The work gave especial attention to what concern the conflicts of normative competency that really often happen between ANP (Agência Nacional do Petróleo, Gás Natural e Biocombustíveis) and the legislatives organs of the Republic Federative of Brazil, because energetic area has unbelievable mater to any country, and the fact of some juridical norm be against the law and be accepted is very dangerous, it affronts the constitutional principle of the legality e may put in risk the democratic Estate of law, them, regulatory dogmatic must be scientifically knows, and developed, thought and especially there are so many doctrinaires divergences about regulation constitutionality. As a theorist point, the investigation got the Logical nocontradiction principle, according Hans Kelsen and Lourival Vilanova thought, doing a philosophical reflection about the system of positive law, in which there are many antinomies, or conflicts of norms, what include the conflicts of the administrative acts expedited by ANP and the legislation of the brazilian regulatory Estate. For a better understanding and exemplify some perplexities treated by the doctrinaire angle, this work did a lucubration about a possibility of a normative conflict between a ANP resolution and the municipal legislation in a specific case, also, brought several jurisprudences for the brazilians courts of justice, that confirm the empiric existence of normative conflicts among ANP s administrative norms and federal legislation. Finally, concludes observing that the regulation is not a legislative competency delegation to regulatory agencies, is just a new exercise of the administrative function, it is a technical specialization of the public administration, that using this know-how can acting with more efficiency, however the normative power of regulatory agencies must respect the empire of law, so in this terms, the dissertation suggests the ponderation of the constitutionals principles of efficiency and legality how form to harmonizing the democratic legitimate inherent to legal norm supremacy, with the perspective of an efficient economic and institutional development

Relevância:

40.00% 40.00%

Publicador:

Resumo:

This scientific study deals about the oil and natural gas production participation payment impact in the county of Governador Dix-sept Rosado, Rio Grande do Norte, between 1998 to 2004, applied to family income and property. To do so, this analysis focus on the ricardian´s theory exposition which merges from the concept of the mineral income, in concern to the legal establishment of royalties. This paper also shows the world evolution oil exploration, inserting Brazil in this scene as a oil and natural gas producter. It identifies the productive site of oil and natural gas in Rio Grande do Norte as the Potiguar Oil Area, characterizing its components in the demographic, physical and social aspects, to reflect in the focus point of observation which is the Governador Dix-sept Rosado county. The participation payment on oil and natural gas is demonstrated in a qualitative analysis both in Brazil as in Rio Grande do Norte. The payments given to the land owners in this federative unity are shown in the period of analysis of this essay. The study tells, based in a field research, the benefaction impact of the payment to the land owners over the income and property. The family income were highly impacted, causing economic social classes change to some land owners. The property had less or none impact. It was found negative externalities as the income utilization to other county uses, not causing a multiplier effect in the studied county. The fact of the not utilization of the properties on productive investments in order to supply the finite characteristic of oil and this source of royalties, contradicts one of the reasons of its establishment which is the payment for its productive exhaustion of a land resource

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Este trabalho apresenta um estudo da Gestão do Conhecimento (GC) no sistema petrolífero do Rio Grande do Norte, considerando possíveis inovações resultantes dessa gestão. Inicialmente, foi feita uma abordagem com relação as características do sistema de petróleo e gás do RN, com base em conceitos disponíveis na literatura. Visou atender aos seguintes objetivos: diagnosticar a rede de empresas do setor petrolífero do RN, identificando qual o estágio de GC em que elas se encontram; identificar e avaliar as práticas de GC utilizadas internamente na Petrobras e nas suas interações dentro da aglomeração; caracterizar a ocorrência das relações entre a UFRN (Universidade Federal do Rio Grande do Norte) x Petrobras. Para alcançar tais objetivos foi desenvolvido um formulário baseado em indicadores de GC e na PINTEC2005 (IBGE), o qual foi aplicado em três grupos: PETROBRAS, Fornecedores da PETROBRAS e UFRN. Como resultados obtidos têm-se: uma análise da GC na PETROBRAS, da GC nos Fornecedores e da cooperação para inovação entre os participantes do sistema, sendo apresentado um estudo da parceria para inovação entre a UFRN x PETROBRAS. Conclui-se que o sistema é uma aglomeração e que apresenta características de um Cluster. Conclui-se ainda que a GC na PETROBRAS encontra-se em fase avançada de implantação no âmbito da corporação, e a parceria entre UFRN e Petrobras pode ser utilizada como modelo de sucesso de integração entre empresas e instituições de pesquisa. Ao final são apresentados, em especial, os resultados obtidos com relação à gestão do conhecimento para a inovação na rede de empresas que operam o sistema petrolífero no Rio Grande do Norte, objetivo principal desta dissertação

Relevância:

40.00% 40.00%

Publicador:

Resumo:

This work intends to analyze the behavior of the gas flow of plunger lift wells producing to well testing separators in offshore production platforms to aim a technical procedure to estimate the gas flow during the slug production period. The motivation for this work appeared from the expectation of some wells equipped with plunger lift method by PETROBRAS in Ubarana sea field located at Rio Grande do Norte State coast where the produced fluids measurement is made in well testing separators at the platform. The oil artificial lift method called plunger lift is used when the available energy of the reservoir is not high enough to overcome all the necessary load losses to lift the oil from the bottom of the well to the surface continuously. This method consists, basically, in one free piston acting as a mechanical interface between the formation gas and the produced liquids, greatly increasing the well s lifting efficiency. A pneumatic control valve is mounted at the flow line to control the cycles. When this valve opens, the plunger starts to move from the bottom to the surface of the well lifting all the oil and gas that are above it until to reach the well test separator where the fluids are measured. The well test separator is used to measure all the volumes produced by the well during a certain period of time called production test. In most cases, the separators are designed to measure stabilized flow, in other words, reasonably constant flow by the use of level and pressure electronic controllers (PLC) and by assumption of a steady pressure inside the separator. With plunger lift wells the liquid and gas flow at the surface are cyclical and unstable what causes the appearance of slugs inside the separator, mainly in the gas phase, because introduce significant errors in the measurement system (e.g.: overrange error). The flow gas analysis proposed in this work is based on two mathematical models used together: i) a plunger lift well model proposed by Baruzzi [1] with later modifications made by Bolonhini [2] to built a plunger lift simulator; ii) a two-phase separator model (gas + liquid) based from a three-phase separator model (gas + oil + water) proposed by Nunes [3]. Based on the models above and with field data collected from the well test separator of PUB-02 platform (Ubarana sea field) it was possible to demonstrate that the output gas flow of the separator can be estimate, with a reasonable precision, from the control signal of the Pressure Control Valve (PCV). Several models of the System Identification Toolbox from MATLAB® were analyzed to evaluate which one better fit to the data collected from the field. For validation of the models, it was used the AIC criterion, as well as a variant of the cross validation criterion. The ARX model performance was the best one to fit to the data and, this way, we decided to evaluate a recursive algorithm (RARX) also with real time data. The results were quite promising that indicating the viability to estimate the output gas flow rate from a plunger lift well producing to a well test separator, with the built-in information of the control signal to the PCV

Relevância:

40.00% 40.00%

Publicador:

Resumo:

The need to implement a software architecture that promotes the development of a SCADA supervisory system for monitoring industrial processes simulated with the flexibility of adding intelligent modules and devices such as CLP, according to the specifications of the problem, it was the motivation for this work. In the present study, we developed an intelligent supervisory system on a simulation of a distillation column modeled with Unisim. Furthermore, OLE Automation was used as communication between the supervisory and simulation software, which, with the use of the database, promoted an architecture both scalable and easy to maintain. Moreover, intelligent modules have been developed for preprocessing, data characteristics extraction, and variables inference. These modules were fundamentally based on the Encog software

Relevância:

40.00% 40.00%

Publicador:

Resumo:

This work deals with the development of a prototype of a helicopter quadrotor for monitoring applications in oil facilities. Anomaly detection problems can be resolved through monitoringmissions performed by a suitably instrumented quadrotor, i.e. infrared thermosensors should be embedded. The proposed monitoring system aims to reduce accidents as well as to make possible the use of non-destructive techniques for detection and location of leaks caused by corrosion. To this end, the implementation of a prototype, its stabilization and a navigation strategy have been proposed. The control strategy is based on dividing the problem into two control hierarchical levels: the lower level stabilizes the angles and the altitude of the vehicle at the desired values, while the higher one provide appropriate references signals to the lower level in order the quadrotor performs the desired movements. The navigation strategy for helicopter quadrotor is made using information provided by a acquisition image system (monocular camera) embedded onto the helicopter. Considering that the low-level control has been solved, the proposed vision-based navigation technique treats the problem as high level control strategies, such as, relative position control, trajectory generation and trajectory tracking. For the position control we use a control technique for visual servoing based on image features. The trajectory generation is done in a offline step, which is a visual trajectory composed of a sequence of images. For the trajectory tracking problem is proposed a control strategy by continuous servovision, thus enabling a navigation strategy without metric maps. Simulation and experimental results are presented to validate the proposal

Relevância:

40.00% 40.00%

Publicador:

Resumo:

The continuous gas lift method is the main artificial lifting method used in the oil industry for submarine wells, due to its robustness and the large range of flow rate that the well might operate. Nowadays, there is a huge amount of wells producing under this mechanism. This method of elevation has a slow dynamics due to the transients and a correlation between the injected gas rate and the of produced oil rate. Electronics controllers have been used to adjust many parameters of the oil wells and also to improve the efficiency of the gas lift injection system. This paper presents a intelligent control system applied to continuous gas injection in wells, based in production s rules, that has the target of keeping the wells producing during the maximum period of time, in its best operational condition, and doing automatically all necessary adjustments when occurs some disturbance in the system. The author also describes the application of the intelligent control system as a tool to control the flow pressure in the botton of the well (Pwf). In this case, the control system actuates in the surface control valve

Relevância:

40.00% 40.00%

Publicador:

Resumo:

This work consists on the study of two important problems arising from the operations of petroleum and natural gas industries. The first problem the pipe dimensioning problem on constrained gas distribution networks consists in finding the least cost combination of diameters from a discrete set of commercially available ones for the pipes of a given gas network, such that it respects minimum pressure requirements at each demand node and upstream pipe conditions. On its turn, the second problem the piston pump unit routing problem comes from the need of defining the piston pump unit routes for visiting a number of non-emergent wells in on-shore fields, i.e., wells which don t have enough pressure to make the oil emerge to surface. The periodic version of this problem takes into account the wells re-filling equation to provide a more accurate planning in the long term. Besides the mathematical formulation of both problems, an exact algorithm and a taboo search were developed for the solution of the first problem and a theoretical limit and a ProtoGene transgenetic algorithm were developed for the solution of the second problem. The main concepts of the metaheuristics are presented along with the details of their application to the cited problems. The obtained results for both applications are promising when compared to theoretical limits and alternate solutions, either relative to the quality of the solutions or to associated running time

Relevância:

40.00% 40.00%

Publicador:

Resumo:

The paper demonstrates how it is organized production chain of natural gas in Rio Grande do Norte and highlights some prospects for this sector. The study is backed by elements to understand the process of innovation as the driving force of capitalist dynamics as well as the features of the Brazilian economy in the years 1990 and 2000 that indicated the development of natural gas production in the energy matrix Brazil. It was found that the state has potiguar possibilities for structuring an energy based on elements from the region and with prospects of becoming self-sufficient in electricity, where natural gas has a share of participation in this segment. The automotive and industrial are the biggest consumers of this input. With emphasis on the textile industry. Signaling to a broad horizon of supply, this sector will depend on their investments in research and Deficient, and the policy adopted by government to develop the consumer market

Relevância:

40.00% 40.00%

Publicador:

Resumo:

The area between São Bento do Norte and Macau cities, located in the northern coast of the Rio Grande do Norte State is submitted to intense and constant processes of littoral and aeolian transport, causing erosion, alterations in the sediments balance and modifications in the shoreline. Beyond these natural factors, the human interference is huge in the surroundings, composed by sensitive places, due to the existence of the Guamaré Petroliferous Pole, RN, the greater terrestrial oil producing in Brazil, besides the activities of the salt companies and shrimp farms. This socioeconomic-environmental context justifies the elaboration of strategies of environmental monitoring of that coastal area. In the environmental monitoring of coastal strips, submitted to human impacts, the use of multi-sources and multitemporal data integrated through a Spatio- Temporal Database that allows the multiuser friendly access. The objective was to use the potential of the computational systems as important tools the managers of environmental monitoring. The stored data in the form of a virtual library aid in making decisions from the related results and presented in different formats. This procedure enlarges the use of the data in the preventive attendance, in the planning of future actions and in the definition of new lines of researches on the area, in a multiscale approach. Another activity of this Thesis consisted on the development of a computational system to automate the process to elaborate Oil-Spill Environmental Sensitivity Maps, based on the temporal variations that some coastal ecosystems present in the sensibility to the oil. The maps generated in this way, based on the methodology proposed by the Ministério do Meio Ambiente, supply more updated information about the behavior of the ecosystem, as a support to the operations in case of oil spill. Some parameters, such as the hydrodynamic data, the declivity of the beach face, types of resources in risk (environmental, economical, human or cultural) and use and occupation of the area are some of the essential basic information in the elaboration of the sensitivity maps, which suffer temporal alterations.In this way, the two computational systems developed are considered support systems to the decision, because they provide operational subsidies to the environmental monitoring of the coastal areas, considering the transformations in the behavior of coastal elements resulting from temporal changes related the human and/or natural interference of the environment

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Pós-graduação em Engenharia Mecânica - FEG

Relevância:

40.00% 40.00%

Publicador:

Resumo:

Acoustic communication is essential in mammals and has three main functions: acquisition of information about the environment, intraspecific communication and detection of predators and prey. Studies indicate that the introduction of sounds produced by anthropogenic activities such as military exercises, use of sonar and activities related to the extraction of oil and natural gas can cause interference in cetacean communication. Recently, the discovery of pre-salt tends to increase these activities. After a decade since the launch date of IBAMA`s licensing and before the imminent increase in exploration activities in Brazil, it is essential to conduct studies to monitor closely the impact of this type of activity on the marine ecosystem. Thus, this study aims to identify potential impacts that the process of oil and natural gas exploration and production might have on the communication of baleen whales. Data from literature on bioacoustics and ecology of these animals were linked with technical-scientific data regarding this type of activity. 310 documents related to the topic were analyzed. Among them only 81 documents are of academic origin, and the others mostly action plans and reports from government agencies. 80% of the documents do not have any species as a focus, and in the remaining 20%, 17% were focused on the Greenland Whale (Balaena mysticetus) and 22% on the gray whale (Eschrichtius robustus). The main impacts identified in this study were the increased frequency and amplitude of vocalization, reduction or cessation of more elaborate songs and masking problems

Relevância:

40.00% 40.00%

Publicador:

Resumo:

In order to study the mechanical properties of micro alloyed steel API 5L X70, a material used to manufacture pipes for pipeline transportation lines for use in oil and gas, a study was made of toughness, tensile strength, impact strength, hardness and microstructure steel. To perform these various tests were made where they can acquire the characteristics of the material. Were performed at the Faculty of Engineering in Guaratinguetá in the Department of Materials and Technology and the tensile tests, Charpy impact test, metallography and hardness testing of material API 5L X70, all tests were done with the help of technical laboratories. With these data can be an analysis of the material about his tenacity, his toughness and fragility, its hardness, its yield strength and its maximum voltage. After being asked the analyzes discussed the results showed that the micro alloyed steel API 5L X70 steel is a very tenacious, it absorbs impact energy of 300 Joules though without a break for the full body of evidence showing its tenacity

Relevância:

40.00% 40.00%

Publicador:

Resumo:

The gas turbine (GT) is known to have: low cost of capital over the amount of energy, high flexibility, high reliability, short delivery time, commissioning and commercial operation at the beginning and quick departure. The gas turbine is also recognized for its superior environmental performance, manifested in air pollution containment and reducing greenhouse gases (Mahi, 1994). Gas turbines in simple cycle mode (SC) have long been used by utilities to limited power generation peak. In addition, manufacturing facilities use gas turbines for power generation units on site, often in combination with the process of heat production, such as hot water and steam process. In recent years, the performance of industrial gas turbines has been improved due to significant investments in research and development, in terms of fuel to electricity conversion efficiency, plant capacity, availability and reliability. The greater availability of energy resources such as natural gas (NG), the significant reduction of capital costs and the introduction of advanced cycles, have also been a success factor for the increased use of gas turbines to load applications base (Poulikas, 2004). Open Cycle Gas Turbine with a greater degree of heat to the atmosphere may alternatively be used to produce additional electricity using a steam cycle, or to compose a cogeneration process. The combined cycle (CC) uses the heat from the gas turbine exhaust gas to increase the power output and increase the overall efficiency of more than 50% second (Najjar, 2001). The initial discovery of these cycles in the commercial power generation market was possible due to the development of the gas turbine. Only from the 1970s that gas turbine inlet temperature and therefore the exhaust gas temperature was sufficiently high to allow a better efficiency in the combined cycle ... (Complete Abstract click electronic access below)