Application of two methods for determining diet of northern fur seals (Callorhinus ursinus)

Examination of hard parts recovered from scats (feces) is currently the most common method for determining the diet of pinnipeds. However, large or sharp prey remains may be spewed (regurgitated) biasing prey composition and size estimations in diet studies based on scats. Percent frequency of occurrence (FO%) and age or size of selected prey remains recovered from northern fur seal (Callorhinus ursinus) scat (n=3444) and spew samples (n=267) collected from rookeries on St. George Island and St. Paul Island, Alaska, between 1990 and 2000 were compared to determine if a bias in prey composition and age or size estimations existed between scats and spews. Overall prey composition was similar between sample type and location, but the relative FO% of primary prey (≥5%) varied by sample type and location. Age or size estimates of walleye pollock (Theragra chalcogramma) and of two species of gonatid squids (Gonatopsis borealis and Berryteuthis magister) were significantly larger in spews than in scats. Observed differences in FO% and estimated age or size of prey species whose remains were found in scats and spews likely result from size-selective digestion of prey remains. Scats were biased toward smaller prey remains, whereas spews were biased toward larger prey remains and cephalopod beaks. The percent overlap between age classes of walleye pollock caught by the commercial trawl fishery and age classes of walleye pollock consumed by northern fur seals varied noticeably between sample types for both islands (scats: St. George=15. 5%; St. Paul=4.1%; spews: St. George=94.6%; St. Paul=89.6%). These results demonstrate that the inclusion of multiple sampling methods allows for a more accurate assessment of northern fur seal prey occurrence and prey age and size.

Paul Ricoeur e a consciência como tarefa: o percurso da reflexão

Este trabalho busca principalmente reconhecer o que considera ser a dimensão sistemática do pensamento de Paul Ricoeur, fundada, como se acredita, na concepção da consciência como tarefa. Procura outrossim compreender os pressupostos ontológicos e metodológicos de seu pensamento. Pretende mostrar também que, ao perseguir uma simbólica dos sentidos múltiplos, a reflexão concreta de Ricoeur integra, a partir do que ele chama dom da linguagem, o logos filosófico, a episteme que virou ciência e a riqueza pré-filosófica do símbolo. Sua hermenêutica filosófica busca a compreensão do si, da reflexão sobre si mesmo, através da interpretação aplicada sobre os signos e símbolos de uma consciência que não se sabe no princípio, mas ao cabo do desvio de suas obras e de seus atos. A reflexão é a reapropriação daquilo que se é a partir do que é dito a si mesmo pelos signos e símbolos da cultura e das tradições. Paul Ricoeur é apresentado ainda como crítico da consciência imediata e narcísica. Ele constrói seu percurso intelectual de sorte a arbitrar o conflito das diversas interpretações que versam sobre o simbolismo humano. Este trabalho procura mostrar finalmente que o filósofo propõe de fato um novo percurso para a reflexão, através de uma démarche em dois tempos, em que o pensamento reflexivo se desapossa do imediatismo da consciência falsa e comum, para posteriormente se reapropriar das significações mais profundas manifestadas em nosso esforço para existir e nutridas pelo nosso desejo de ser. Eis a trajetória histórica e exemplar que esta dissertação busca evidenciar.

A poesia de Paul Auster

This thesis examines Paul Austers extremely neglected early work: his poetry. Five books were published: Unearth (1974), Wall writing (1976), Effigies (1977), Fragments from cold (1977) and Facing the music (1980), available only at antiquarians and restrective universities libraries in the United States, as well as at the New York Public Library. Studies around Austers poetic oeuvre are restricted to papers, reviews, translators introduction, and a thesis that focus on his poetry to produce new analyses and interpretations of Austers novelistic works. The aim of this thesis is to gather this scattered material and provide new parameters of study around his poetry. Divided into three chapters, the first one maps the literary magazines where Auster published his poems at first, the translations of his poems and critical fortune; the second examines Austers five books according to three specific topics authorship, language, I and other themes related to them; the third analyzes White Spaces, text considered by the author as the bridge that leads him to prose and in this thesis as a singular writing in which Auster consolidates his literary project, since poetry, previous to prose, yet to come. Maurice Blanchot, Karlheinz Stierle and, principally, Auster, lay the foundation of the investigation. Other theorists who contribute to the understanding of the subject will be called to build the sui generis comparativism put into effect here

Stanford oceanographic expedition 17, Galapagos Islands and vicinity, 22 February-23 March 1968: observations on birds, the Galapagos fur seal, and cetaceans

1. Systematic list of birds (pp. 23-31) 2. Observations on the Galapagos fur seal, Arctocephalus australis galapagoensis Heller, 1904 (pp. 31-33) 3. Cetaceans observed (pp. 33-34)

Examination of the foraging habits of Pacific harbor seal (Phoca vitulina richardsi) to describe their use of the Umpqua River, Oregon, and their predation on salmonids

The increase in harbor seal (Phoca vitulina richardsi) abundance, concurrent with the decrease in salmonid (Oncorhynchus spp.) and other fish stocks, raises concerns about the potential negative impact of seals on fish populations. Although harbor seals are found in rivers and estuaries, their presence is not necessarily indicative of exclusive or predominant feeding in these systems. We examined the diet of harbor seals in the Umpqua River, Oregon, during 1997 and 1998 to indirectly assess whether or not they were feeding in the river. Fish otoliths and other skeletal structures were recovered from 651 scats and used to identify seal prey. The use of all diagnostic prey structures, rather than just otoliths, increased our estimates of the number of taxa, the minimum number of individuals and percent frequency of occurrence (%FO) of prey consumed. The %FO indicated that the most common prey were pleuronectids, Pacific hake (Merluccius productus), Pacific stag-horn sculpin (Leptocottus armatus), osmerids, and shiner surfperch (Cymatogaster aggregata). The majority (76%) of prey were fish that inhabit marine waters exclusively and fish found in marine and estuarine areas (e.g. anadromous spp.) which would indicate that seals forage predominantly at sea and use the estuary for resting and opportunistic feeding. Salmonid remains were encountered in 39 samples (6%); two samples contained identifiable otoliths, which were determined to be from chi-nook salmon (O. tshawytscha). Because of the complex salmonid composition in the Umpqua River, we used molecular genetic techniques on salmonid bones retrieved from scat to discern species that were rare from those that were abundant. Of the 37 scats with salmonid bones but no otoliths, bones were identified genetically as chinook or coho (O. kisutch) salmon, or steelhead trout (O. mykiss) in 90% of the samples.

Molecular methods for the genetic identification of salmonid prey from Pacific harbor seal (Phoca vitulina richardsi) scat

Twenty-six stocks of Pacific salmon and trout (Oncorhynchus spp.), representing evolutionary significant units (ESU), are listed as threatened or endangered under the Endangered Species Act (ESA) and six more stocks are currently being evaluated for listing. The ecological and economic consequences of these listings are large; therefore considerable effort has been made to understand and respond to these declining populations. Until recently, Pacific harbor seals (Phoca vitulina richardsi) on the west coast increased an average of 5% to 7% per year as a result of the Marine Mammal Protection Act of 1972 (Brown and Kohlman2). Pacific salmon are seasonally important prey for harbor seals (Roffe and Mate, 1984; Olesiuk, 1993); therefore quantifying and understanding the interaction between these two protected species is important for Morphobiologically sound management strategies. Because some Pacific salmonid species in a given area may be threatened or endangered, while others are relatively abundant, it is important to distinguish the species of salmonid upon which the harbor seals are preying. This study takes the first step in understanding these interactions by using molecular genetic tools for species-level identification of salmonid skeletal remains recovered from Pacific harbor seal scats.

Experimental investigation of turbine stator well rim seal, reingestion and interstage seal flows using gas concentration techniques and displacement measurements

Gas turbine engine performance requires effective and reliable internal cooling over the duty cycle of the engine. Life predictions for rotating components subject to the main gas path temperatures are vital. This demands increased precision in the specification of the internal air system flows which provide turbine stator well cooling and sealing. This in turn requires detailed knowledge of the flow rates through rim seals and interstage labyrinth seals. Knowledge of seal movement and clearances at operating temperatures is of great importance when prescribing these flows. A test facility has been developed at the University of Sussex, incorporating a two stage turbine rated at 400 kW with an individual stage pressure ratio of 1.7:1. The mechanical design of the test facility allows internal cooling geometry to be rapidly re-configured, while cooling flow rates of between 0.71 CW, ENT and 1.46 C W, ENT, may be set to allow ingress or egress dominated cavity flows. The main annulus and cavity conditions correspond to in cavity rotational Reynolds numbers of 1.71×106< Reφ <1.93×106. Displacement sensors have been used to establish hot running seal clearances over a range of stator well flow conditions, allowing realistic flow rates to be calculated. Additionally, gas seeding techniques have been developed, where stator well and main annulus flow interactions are evaluated by measuring changes in gas concentration. Experiments have been performed which allow rim seal and re-ingestion flows to be quantified. It will be shown that this work develops the measurement of stator well cooling flows and provides data suitable for the validation of improved thermo-mechanical and CFD codes, beneficial to the engine design process. Copyright © 2011 by Rolls-Royce plc.

High-order DES and zonal LES of a labyrinth seal

Hybrid numerical large eddy simulation (NLES) and detached eddy simulation (DES) methods are assessed on a labyrinth seal geometry. A high sixth order discretization scheme is used and is validated using a test case of a two dimensional vortex. The hybrid approach adopts a new blending function and along with DES is initially validated using a simple cavity flow. The NLES method is also validated outside of RANS zones. It is found that there is very little resolved turbulence in the cavity for the DES simulation. For the labyrinth seal calculations the DES approach is problematic giving virtually no resolved turbulence content. It is seen that over the tooth tips the extent of the LES region is small and is likely to be a strong contributor to excessive flow damping in these regions. On the other hand the zonal Hamilton-Jacobi approach did not suffer from this trait. In both cases the meshes used are considered to be hybrid RANS-LES adequate. Fortunately (or perhaps unfortunately) the DES profiles are in agreement with the time mean experimental measurements. It is concluded that for an inexperienced CFD practitioner this could have wider implications particularly if transient results such as unsteady loading are desired. Copyright © 2012 by the American Institute of Aeronautics and Astronautics, Inc.

Development of a hybrid ferrofluid seal technology for miniature pneumatic and hydraulic actuators

Future microrobotic applications require actuators that can generate a high actuation force and stroke in a limited volume. Up to now, little research has been performed on the development of pneumatic and hydraulic microactuators, although they offer great prospects in achieving high force densities. One of the main technological barriers in the development of these actuators is the fabrication of powerful seals with low leakage. This paper presents a seal technology for linear fluidic microactuators based on ferrofluids. A design and simulation method for these seals has been developed and validated by measurements on miniaturized actuator prototypes. These actuators have an outside diameter of 2 mm, a length of 13 mm and have been tested using both pressurized air and water. Our current actuator prototypes are able to operate at pressures up to 1.6 MPa without leakage. At these pressures, forces up to 0.65 N have been achieved. The stroke of the actuators is 10 mm. © 2009 Elsevier B.V. All rights reserved.