126 resultados para Savana florestada
Resumo:
13C e 14C obtidos da matéria orgânica do solo foram usados para diferenciar fases de flutuação da vegetação em transição floresta-savana. A região apresenta baixos platôs com depressões topográficas imperfeitamente drenadas na superfície. Na topossequência estudada foram analisados solos de cinco perfis localizados sob floresta (F), transição floresta-savana (S1), borda da depressão sob savana (S2) e centro da depressão sob savana (S3). Os valores de 13C e idades evidenciam que a ~ 200cm de profundidade, com idades entre ~ 12.000 e 10.000 A.P., valores de -27‰ a -27,7‰ indicam vegetação de floresta (C3) em todos os perfis. Na profundidade de 100 cm, com idades entre ~ 6.000 e 5.000 A.P., houve enriquecimento de – 20,2‰ a -22,3‰, indicando regressão da floresta e expansão da savana. Valores entre -15,9 e -18,7‰ a 50-60 cm, estimado entre ~ 4.700 a 3.800 A.P., sugere máxima expansão da vegetação C4 em resposta às condições climáticas mais secas, exceto no perfil S3 com valores mais empobrecidos (-20,9‰), sugerindo que na depressão, o desenvolvimento da hidromorfia possibilitou a presença de espécies de gramíneas C3 e C4 da savana em resposta as mudanças das condições ambientais.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Bordas são áreas de transição entre dois ecossistemas e podem ter origem natural ou antrópica. A influência de borda inclui tanto os efeitos diretos, relacionados às alterações microambientais, como os efeitos indiretos que afetam as interações entre espécies. Adicionalmente, estudos sugerem que a orientação cardinal pode modificar os efeitos microambientais da borda. O objetivo deste estudo foi avaliar a influência de borda sobre os fatores microambientais, as condições edáficas locais, a densidade e a riqueza de espécies em um Cerrado sensu stricto em Itirapina, SP, Brasil. Especificamente, nós investigamos se as características microambientais (umidade relativa do ar (%), radiação fotossinteticamente ativa (PAR), temperatura e porcentagem de abertura de dossel), as condições edáficas e a composição da vegetação diferem entre parcelas (36 parcelas de 25 × 2 m distanciadas 50 m entre si) distribuídas na borda e no interior, orientadas a leste e a sul do Cerrado estudado. Todos os indivíduos lenhosos com circunferência a 30 cm da base do caule ≥ 3 cm foram amostrados e marcados. As variáveis microambientais e as amostras de solo para análises químicas e granulométricas (0-20 cm de profundidade) foram coletadas em três pontos de cada parcela. Foi registrado um total de 120 espécies distribuídas em 40 famílias. Dentre os parâmetros estruturais da vegetação, somente a densidade absoluta foi significativamente maior no interior sul do fragmento. As variáveis microambientais diferiram significativamente entre as faces leste e sul, mas não entre borda e interior. Os parâmetros microambientais e estruturais não caracterizaram uma influência da borda. Entretanto, a orientação cardinal leste e sul e fatores microambientais associados, e a presença de determinados nutrientes no solo como o Mn, influenciaram a estrutura da vegetação de Cerrado e a sua composição em espécies. Nossos resultados ressaltam a importância de considerar a orientação cardinal, além da composição de nutrientes no solo, e dos fatores microambientais, para compreender as variações da vegetação em escala local.
Resumo:
Pós-graduação em Agronomia (Ciência do Solo) - FCAV
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
A relação professor-aluno hoje é muito estudada, pois a educação é a base para o ser humano. Nesta monografia, pretendemos abordar alguns aspectos relevantes que interferem na boa ou má relação entre ambos. Encontramos o embasamento teórico para essa pesquisa junto a alguns teóricos que abordaram essa relação, particularmente, Pedro Morales e Patrícia Patrício. A metodologia adotada para a verificação buscou-se em observações diretas em aula ministradas e observadas em uma escola pública de Ensino Fundamental e Médio e também por meio de um questionário aplicado com 90 alunos dessa mesma escola. Sendo assim, com o objetivo de identificar os aspectos influentes na relação professor e aluno e avaliar suas consequências, chegamos a resultados interessantes, como o autoritarismo, o meio escolar, e, principalmente, a dedicação do professor afetam nessa relação. Dessa forma, confirmamos o que os autores dizem com as observações feitas em relação aos alunos e aos professores
Resumo:
Malocclusion class II-1, is represented by a high prevalence in Brazil, being something common in orthodontic practice. One of the main characteristics of this malocclusion is jaw retrusion, by what many devices of jaw advance are presented in the literature. Being one of them Herbst's device, which is a functional and fixed device created by Emil Herbst (1905) and updated by Hans Pancherz in the decade of 80s.This device is characterized by keeping the jaw advance in a continuous way, while presenting a less active treatment, leading to an immediate aesthetic impact, and the patient cooperation is not required. To improve the anchoring and prevent the collapse of the apparatus was set up last amended version of it by Dr Raveli quoted as Herbst splint. Recent research indicates the use of this device after the peak pubertal growth, creating an appropriate response condylar. The aim of this work is to show the orthodontist a choice of how to use the splint Herbst in Class malocclusions II-1.
Resumo:
The study aimed to assess the degree of dental crowding correction on the lower anterior region of patients treated with T4k functional appliance using Little’s irregularity index. Twenty caucasian patients of both gender (10 female and 10 male) were selected. They featured malocclusion Class I and II in mixed dentition, with chronological age between 5.7 and 11 years. The treatment lasted from 1 year and 11 months up to 3 years and 11 months. Lower anterior crowding was measured using Little’s irregularity index. Measurements were obtained on study models achieved before and after functional orthopedic therapy, using a digital caliper in millimeters and placed parallel to the occlusal plane. Overjet and overbite measurements were also performed using a caliper. Results demonstrated that the therapy provided significant decrease in overjet (average = 1.55 mm) and also in the irregularity index (average = 1.23 mm). There was a nonsignificant raise in overbite. There was no relation between the studied variables and the treatment period or even with the patient’s age in the beginning of the therapy. The treatment with T4k resulted on reduction and improvement of dental crowding.
Resumo:
The current reports the case of a young patient with malocclusion Class II division 1 on permanent dentition treated in two stages, rthopedics and orthodontics, respectively. At first, the banded Herbst appliance was used duringa 7 months period, followed by a T4K appliance, Trainer for Kids used as retention, and on the second stage the corrective Orthodontics was performed. The results showed the acquirement of a Class I dental relationship, which was kept stable, with excellent intercuspation, even after 5 years of the removal of the Herbst appliance, as well as the correction of the overjet and the reduction of the facial profile convexity. It can be concluded that the Herbst appliance was very efficient in correcting the Class II malocclusion, long term, also providing a very favorable effect on the facial profile.
Resumo:
Class II malocclusion features a high prevalence in Brazil, being considered as a routine in orthodontic clinics. A number of appliances are shown in the literature in order to correct Class II malocclusion with mandibular retrusion. Herbst´s fixed functional appliance, idealized by Emil Herbst (1905) and reintroduced, in the 1980´s, by Hans Pancherz is highlighted for maintaining the mandible continuously advanced, showing a shorter active treament time, an immediate esthetic impact on the facial profile, as well as requiring no patient´s commitment. Recent researches indicate the use of this appliance in individuals after pubertal growth surge. The aim of the present study is to show the orthodontics practitioner the option to use this appliance so as to treat Class II in individuals after the growth surge, obtaining satisfactory outcomes and further Class II correction.
Resumo:
This paper aims at describeconstruction and installation sequences of a new design of appliance that allows continuously protraction of the mandible, using the telescopic mechanism of the Herbst appliance. This appliance has the advantage to be easily assembled by the orthodontist, without the necessity of molding and the assistance of a specialized laboratory, as well as the constant permanence in the mouth of the patient for being fixed.
Resumo:
The polemical discussion between orthodontic therapeutic and surgical approaches with relation to borderline cases receives a new impulse with the emergence of temporary anchorage devices. This branch of Orthodontics has brought new treatment perspectives, but it has still been applied empirically, while the various factors involved in determining and conducting the treatment planning are neglected. The objective of the present study is to identify the several factors to be considered in both forms of treatment in order to provide the orthodontist with information that may contribute for the correct decision.
Resumo:
The Herbst appliance is currently one of the most used appliances for the correction of Class II division 1 with mandibular retrusion. When used in peak, or just after the peak of growth it can result in some skeletal gain, which is favorable to the correction of anteroposterior discrepancy with effective and stable results. This article aims to report a case of a patient with malocclusion Class II division 1 with mandibular retrusion, associated with maxillary protusion, treated in two stages: with Herbst splint metallic appliance followed by fixed appliance orthodontic treatment.
Resumo:
Nowadays, the correction of skeletal vertical dysplasia is considered a great challenge in Orthodontics. The skeletal open bite treatment presents limitations related to vertical growth pattern, the extension of open bite and especially the stability, which is very questioned. The treatment of skeletal open bite is mostly realized by the inhibition of vertical alveolar posterior development (relative intrusion) or absolute intrusion of posterior teeth, through vertical forces, generated by the action of masticatory muscles. The purpose of this article is to present a new appliance for the treatment of skeletal open bite, the VABB (Vertically Activated Bite Block) or modified Bite Block, whose action mechanism is to limit the vertical development of the molars, by the action of facial muscles and two bilateral expansion screws that provide a counterclockwise rotation of the mandible. It will also be presented a clinical case and the technical steps for the construction of this appliance.
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)