Hydrochemical and isotopic tracing of mixing dynamics and water quality evolution under pumping conditions in the mine shaft of the abandoned Frances Colliery, Scotland.

Since 1995, when pumps were withdrawn from deep mines in East Fife (Scotland), mine waters have been rebounding throughout the coalfield. Recently, it has become necessary to pump and treat these waters to prevent their uncontrolled emergence at the surface. However, even relatively shallow pumping to surface treatment lagoons of the initially chemically-stratified mine water from a shaft in the coastal Frances Colliery during two dynamic step-drawdown tests to establish the hydraulic characteristics of the system resulted in rapid breakdown of the stratification within 24 h and a poor pumped water quality with high dissolved Fe loading. Further, data are presented here of hydrochemical and isotopic sampling of the extended pump testing lasting up to several weeks. The use in particular of the environmental isotopes d18O, d2H, d34S, 3H, 13C and 14C alongside hydrochemical and hydraulic pump test data allowed characterisation of the Frances system dynamics, mixing patterns and water quality sources feeding into this mineshaft under continuously pumped conditions. The pumped water quality reflects three significant components of mixing: shallow freshwater, seawater, and leakage from the surface treatment lagoons. In spite of the early impact of recirculating lagoon waters on the hydrochemistries, the highest Fe loadings in the longer-term pumped waters are identified with a mixed freshwater–seawater component affected by pyrite oxidation/melanterite dissolution in the subsurface system.

Influence of environmental enrichment on the behaviour, performance and meat quality of domestic pigs

Three hundred and twenty pigs were reared from birth to slaughter at 21 weeks in either barren or enriched environments. The barren environments were defined as intensive housing (slatted floors and minimum recommended space allowances) and the enriched environments incorporated extra space, an area which contained peat and straw in a rack. Behavioural observations showed that environmental enrichment reduced time spent inactive and time spent involved in harmful social and aggressive behaviour while increasing the time spent in exploratory behaviour. During the finishing period (15-21 weeks) mean daily food intakes were higher and food conversion ratios were lower for pigs in enriched environments compared with their counterparts in barren environments (P

Psychological adjustment to Type 2 Diabetes and relationship quality

Aims To examine the associations between psychological adjustment to Type 2 diabetes and the reported quality and type of relationships with partners. Methods All participants (n = 88) completed a number of questionnaires, including twomeasures of relationship quality: the Dyadic Adjustment Scale and the PersonalAssessment of Intimacy inRelationships Scale, theDiabetesQuality of Life Scale and the ATT-19 (which assesses personal integration of diabetes). Additionally, HbA1c levels were obtained from medical notes. Results Measures of relationship quality significantly contributed to the explanation of two outcomes: personal integration of diabetes and satisfaction with the burden of self-management behaviours. More specifically, the findings demonstrate that a specific aspect of relationship quality—intimacy in recreational activities—is positively associated with the outcomesmentioned above. Conclusions People with Type 2 diabetes who are not taking insulin, who share engagement in physical activities with their partner are more likely to be psychologically well-adjusted to their diagnosis of diabetes.

Dynamic pricing models for used products in remanufacturing with lost-sales and uncertain quality

In this paper, we investigate the remanufacturing problem of pricing single-class used products (cores) in the face of random price-dependent returns and random demand. Specifically, we propose a dynamic pricing policy for the cores and then model the problem as a continuous-time Markov decision process. Our models are designed to address three objectives: finite horizon total cost minimization, infinite horizon discounted cost, and average cost minimization. Besides proving optimal policy uniqueness and establishing monotonicity results for the infinite horizon problem, we also characterize the structures of the optimal policies, which can greatly simplify the computational procedure. Finally, we use computational examples to assess the impacts of specific parameters on optimal price and reveal the benefits of a dynamic pricing policy. © 2013 Elsevier B.V. All rights reserved.

Range expansion in an invasive small mammal: influence of life-history and habitat quality.

Invasive species pose a major threat to biodiversity but provide an opportunity to describe the processes that lead to changes in a species’ range. The bank vole (Myodes glareolus) is an invasive rodent that was introduced to Ireland in the early twentieth century. Given its continuing range expansion, the substantial empirical data on its spread thus far, and the absence of any eradication program, the bank vole in Ireland represents a unique model system for studying the mechanisms influencing the rate of range expansion in invasive small mammals. We described the invasion using a reaction–diffusion model informed by empirical data on life history traits and demographic parameters. We subsequently modelled the processes involved in its range expansion using a rule-based spatially explicit simulation. Habitat suitability interacted with density-dependent parameters to influence dispersal, most notably the density at which local populations started to donate emigrating individuals, the number of dispersing individuals and the direction of dispersal. Whilst local habitat variability influenced the rate of spread, on a larger scale the invasion resembled a simple reaction–diffusion process. Our results suggest a Type 1 range expansion where the rate of expansion is generally constant over time, but with some evidence for a lag period following introduction. We demonstrate that a two-parameter empirical model and a rule-based spatially explicit simulation are sufficient to accurately describe the invasion history of a species that exhibits a complex, density-dependent pattern of dispersal.

Private equity, the minimalist organization and the quality of employment relations

This article develops a firm-level analysis of how the quality of employment relations following acquisition by private equity firms (PEFs) is contingent upon the strategic intent of those firms and the post-acquisition organizational choices they make. The efficiency gains that PEFs seek in acquired companies are expected to encourage restructuring towards a minimalist organization. However, the form such an organization takes is seen to depend on whether PEF strategy is oriented primarily towards extracting short-term value from acquired assets rather than towards renewing and developing those assets. Contrasts in the process of restructuring and in organizational form associated with these two strategies will have different implications for the quality of employment relations. The way in which PEFs restructure the companies or units they acquire is the key intervening factor between the strategic intent of PEFs and impact they have on the quality of employment relations. © The Author(s) 2010.

Voltage and power quality improvement strategy for a DFIG wind turbine during variable wind conditions

This paper presents a voltage and power quality enhancement scheme for a doubly-fed induction generator (DFIG) wind farm during variable wind conditions. The wind profiles were derived considering the measured data at a DFIG wind farm located in Northern Ireland (NI). The aggregated DFIG wind farm model was validated using measured data at a wind farm during variable generation. The voltage control strategy was developed considering the X/R ratio of the wind farm feeder which connects the wind farm and the grid. The performance of the proposed strategy was evaluated for different X/R ratios, and wind profiles with different characteristics. The impact of flicker propagation along the wind farm feeder and effectiveness of the proposed strategy is also evaluated with consumer loads connected to the wind farm feeder. It is shown that voltage variability and short-term flicker severity is significantly reduced following implementation of the novel strategy described.

Comparative study of tool life and hole quality in drilling of CFRP/titanium stack using coated carbide drill

The use of hybrid materials including carbon fiber reinforced plastics (CFRPs) and lightweight metals such as titanium are increasing particularly in aerospace applications. Multi-material stacks require a number of holes for the assembly purposes. In this research, drilling trials have been carried out in CFRP, Ti-6Al-4V and CFRP/Ti-6Al-4V stack workpieces using AlTiN coated tungsten carbide drill bit. The effects of process parameters have been investigated. The thrust force, torque, burr formation, delamination, surface roughness and tool wear have been analyzed at various processing condition. The experimental results have shown that the thrust force, torque, burr formation and the average surface roughness increase with the increased feed rate and decrease with the increased cutting speed in drilling of Ti-6Al-4V. In drilling CFRP, delamination and the average surface roughness has similar tendency with the cutting parameters however thrust force and torque rises with the increased cutting speed. The results showed that after making 15 holes in CFRP/Ti-6Al-4V stack, measured thrust forces were increased by 20% in CFRP and by 45% in Ti-6Al-4V. Delamination was found to be much smaller in drilling of CFRP in stack from compared to drilling single CFRP. Tool life was significantly shortened in drilling of stack due to the combination of the wear mechanisms.

Technology, work organisation and job quality in the service sector: an introduction’

This special issue volume is concerned with how technology is changing the nature of work and working conditions while generating new products and new forms of service delivery. The five articles included in this volume cover service work, from the routine and clerical through to highly credentialed and professional work. Although some of the established challenges concerning the impact of Information and Communication Technology (ICT) on work and workplaces are evident in the articles, it is also clear that new service delivery processes demand new skills and training to some extent. Overall findings indicate that while ICT competencies are important, they need to be supplemented by the soft skills that are crucial for effective customer interactions and more open work systems with greater autonomy and participation whereby flexible work teams can have a positive impact on job quality outcomes. This introductory article examines technology and the changing nature of work through three strands of interpretation, prior to introducing the five articles in this special issue.

Diagenetic Alterations and Reservoir Quality Evolution of Lower Cretaceous Fluvial Sandstones: Nubian Formation, Sirt Basin, North-Central Libya

Lower Cretaceous meandering and braided fluvial sandstones of the Nubian Formation form some of the most important subsurface reservoir rocks in the Sirt Basin, north-central Libya. Mineralogical, petrographical and geochemical analyses of sandstone samples from well BB6-59, Sarir oilfield, indicate that the meandering fluvial sandstones are fine- to very fine-grained subarkosic arenites (av. Q91F5L4), and that braided fluvial sandstones are medium- to very coarse-grained quartz arenites (av. Q96F3L1). The reservoir qualities of these sandstones were modified during both eodiagenesis (ca. <70oC; <2 km) and mesodiagenesis (ca. >70oC; >2km). Reservoir quality evolution was controlled primarily by the dissolution and kaolinitization of feldspars, micas and mud intraclasts during eodiagenesis, and by the amount and thicknessof grain-coating clays, chemical compaction and quartz overgrowths during mesodiagenesis. However, dissolution and kaolinitization of feldspars, micas and mud intraclasts resulted in the creation of intercrystalline micro- and mouldic macro-porosity and permeability during eodiagenesis, which were more widespread in braided fluvial than in meandering fluvial sandstones. This was because of the greater depositional porosity and permeability in the braided fluvial sandstones which enhanced percolation of meteoric waters. The development of only limited quartz overgrowths in the braided fluvial sandstones, in which quartz grains are coated by thick illite layers, retained high porosity and permeability (12-23 % and 30- 600 mD). By contrast, meandering fluvial sandstones underwent porosity loss as a result of quartz overgrowth development on quartz grains which lack or have thin and incomplete grain-coating illite (2-15 % and 0-0.1mD). Further loss of porosity in the meandering fluvial sandstones occurred as a result of chemical compaction (pressuredissolution) induced by the occurrence of micas along grains contacts. Otherdiagenetic alterations, such as the growth of pyrite, siderite, dolomite/ankerite and albitization, had little impact on reservoir quality. The albitization of feldspars may have had minor positive influence on reservoir quality throughthe creation of intercrystalline micro-porosity between albite crystals.The results of this study show that diagenetic modifications of the braided and meandering fluvial sandstones in the Nubian Formation, and resulting changes in reservoir quality, are closely linked to depositional porosity and permeability. They are also linked to the thickness of grain-coating infiltrated clays, and to variations in detrital composition, particularly the amounts of mud intraclasts, feldspars and mica grains as well as climatic conditions.

On the Ontological Quality and Logical Quality of Conceptual-Modeling Grammars: The Need for a Dual Perspective

A core activity in information systems development involves building a conceptual model of the domain that an information system is intended to support. Such models are created using a conceptual-modeling (CM) grammar. Just as high-quality conceptual models facilitate high-quality systems development, high-quality CM grammars facilitate high-quality conceptual modeling. This paper provides a new perspective on ways to improve the quality of the semantics of CM grammars. For many years, the leading approach to this topic has relied on ontological theory. We show, however, that the ontological approach captures only half the story. It needs to be coupled with a logical approach. We explain how the ontological quality and logical quality of CM grammars interrelate. Furthermore, we outline three contributions that a logical approach can make to evaluating the quality of CM grammars: a means of seeing some familiar conceptual-modeling problems in simpler ways; the illumination of new problems; and the ability to prove the benefit of modifying existing CM grammars in particular ways. We demonstrate these benefits in the context of the Entity-Relationship grammar. More generally, our paper opens up a new area of research with many opportunities for future research and practice.