Biodiversity of cyanobacteria and green algae on monuments in the Mediterranean Basin: an overview

Microbiology (2009), 155, 3476–3490

Mineralogia da fracção argilosa da Formação de Vale Álvaro (Bragança, NE Portugal)

The studied materials were sampled from several conglomerate and carbonate sandstone units, overlapped for 23 meters. This formation represents a debris flow dominated alluvial fan alternating with quiet sedimentary conditions. These deposits of probably Paleogene age were placed upon mafic and ultramafic rocks that are the exclusive source of sediments. Optical and SEM identification, microanalysis and XRD studies (with decomposition procedures) of clay fractions obtained after high-speed centrifugation were performed in order to characterise the clay minerals content. The results of the analytical program allowed the establishment of the following remarks: a) Fe-rich montmorillonite dominance over paligorskite, chlorite, chlorite-smectite mixed-layers, serpentine and talc; b) smectites in the 12.4 - 15 A range, expanding to about 17 A after EG treatment; c) serpentine and talc as secondary minerals in the interior of altered clasts; d) chlorite and clorite smectite mixed-layer compositions in the borders of the clasts and in the cement. The composition of sediments results from coarse clasts eroded from mafic and ultramafic rocks and clayey material. Clasts show evidences of post-depositional weathering (coatings of chlorite and smectite). Clayey material has the contributions of i) inherired chlorite, smectite and chlorite-smectite mixed-layers; ii ) authigenic crystallisation of Fe-montmorillonite (due to availability of Fe in the crystallising solutions following previous weathering events); iii) authigenic paligorskite associated to a carbonate cement.

High-resolution correlation of coastal cliff sections in the Lagos- Portimao Formation (Lower - Middle Miocene, central Algarve, Portugal)

This paper describes a high-resolution stratigraphic correlation scheme for the early to middle Miocene Lagos-Portimão Formation of central Algarve, southern Portugal. The Lagos Portimão-Formation of central Algarve is a 60 m thick package of horizontally bedded siliciclastics and carbonates. The bryozoan and mollusc dominated biofacies is typical of a shallow marine, warm-temperate climatic environment. We define four stratigraphic marker beds based on biofacies, lithology, and gamma-ray signatures. Marker bed 1 is a reddish shell bed composed predominantly of bivalve shells in various stages of fragmentation. Marker bed 2 is a fossiliferous sandstone / sandy rudstone characterized by bryozoan masses. Marker bed 3 is also a fossiliferous sandstone with abundant larger foraminifers and foliate bryozoans. Marker bed 4 is composed of three distinct layers; two fossiliferous sandstones with an intercalated shell bed. The upper sandstone unit displays thickets of the bryozoan Celleporaria palmate associated with the coral Culizia parasitica. This stratigraphic framework allows to correlate isolated outcrops within the stratigraphic context of the Lagos-Portimão Formation and to establish high resolution chronostratigraphic Sr-isotopic dating.

Amazon landforms and soils in relation to biological diversity

Thirteen main landform units are distinguished for the whole of the forested Amazon region, each with its specific soil pattern and vegetation structure. These landform-soil-vegetation units are delineated on a small-scale map and illustrated by a schematic cross-section. Floristic diversity of the gamma type is to be highest on the steepland-and-valley complexes of the Andean fringe, on the crystalline shield uplands, on the inselberg complexes, and on the eutric variant of the western sedimentary plains. Endemism is expected to be highest on the sandy plains, and parts of the table lands and inselberg complexes. Speciation, linked to the concept of forest refuge areas, is likely to be highest on the sandstone table lands, on the stretches of Amazon planalto, and in the areas of relict valleys, in view of the prolonged geomorphological stability of these units.

Influence of type of binder and sand on the characteristics of masonry mortars

This study deals with the characterization of masonry mortars produced with different binders and sands. Several properties of the mortars were determined, like consistence, compressive and flexural strengths, shrinkage and fracture energy. By varying the type of binder (Portland cement, hydrated lime and hydraulic lime) and the type of sand (natural or artificial), it was possible to draw some conclusions about the influence of the composition on mortars properties. The results showed that the use of Portland cement makes the achievement of high strength classes easier. This was due to the slower hardening of lime compared with cement. The results of fracture energy tests showed much higher values for artificial sand mortars when compared with natural sand ones. This is due to the higher roughness of artificial sand particles which provided better adhesion between sand and binder.

Cryptic species in Pagamea coriacea sensu lato (Rubiaceae): evidence from morphology, ecology and reproductive behavior in a sympatric context

In this study we explore morphological and ecological variation in sympatric populations of Pagamea coriacea s.l. - a species complex from white-sand vegetation in the Amazon. A total of 147 trees were sampled and monitored at three nearby sites in Central Amazon, Brazil. Multivariate analyses of morphology indicated two distinct groups (A and B), which also differed in bark type, each containing subgroups associated with sexual dimorphism. However, a single hermaphroditic individual was observed within group B. As expected, all pistillate plants produced fruits, but 23% of the staminate plants of group B, and 5% of group A also produced fruits. This variation suggests that the sexual systems of both groups are between dioecy and gynodioecy. There was an overlap in flowering phases between the two groups, but the pattern of floral maturation differed. Ecologically, plants of group B were found in more shaded habitats and over sandstone bedrocks, while group A was prevalent in deeper sandy soils as canopy plants. The significances of morphological and environmental differences were tested by a multivariate analysis of variance, and a canonical discriminant analysis assessed the importance of variables. The coexistence in sympatry of two discrete morphological groups in the P. coriacea s.l., with different habitat preferences and reproductive behaviors, indicates they represent distinct species.

Groundwater vulnerability and protection in County Tipperary (South Riding), Ireland

The aim of the project was to determine the extent and quality of the groundwater in Tipperary South Riding with a view to developing a groundwater protection plan which would allow the Local Authority to manage, protect and develop the groundwater as efficiently as possible. The geology of the area varies with topography. The low-lying areas of the county comprise mainly Carboniferous limestones while the elevated regions consist of sandstones and shales of Upper Carboniferous, Devonian and Silurian ages. Deformation of these rocks decreases in magnitude moving northwards over the area; the Southern Synclines having suffered the effects of the Hercynian orogeny and the northern region exhibiting Caledonian orogenic trends. Quaternary (subsoil) deposits are found throughout the area and are of variable thickness and permeability. Till is the most widespread deposit with discontinuous pockets of sand and gravel in various proportions, and some marl, alluvium and peat in places. The principal aquifers of the area are the Kiltorcan sandstone formation and various limestone units within the Carboniferous succession. 50 % of south Tipperary constitutes either regionally or locally important aquifers. Secondary permeabilities created by structural deformation, dolomitisation, karstification and weathering processes create high transmissivities and often have large well yields. Specific baseflow analysis highlighted the complexity of the aquifers and proved that the lower part of the Suir river system is a major groundwater resource region. The hydrochemistry and water quality of the local authority groundwater sources was examined briefly. The majority of south Tipperary is underlain by limestone or Quaternary deposits derived from limestone and, consequently, calcium/magnesium bicarbonate waters predominate. The quality of the groundwater in south Tipperary demonstrates that the main concern originates from the presence of E.coli, and Total coliforms. The primary sources of contamination are from farmyard wastes and septic tanks. The vulnerability of groundwater to diffuse and point sources of pollution has been found to be dependent on the overlying soil, subsoil and the thickness of the unsaturated zone. A conceptual rather than quantitative approach is used and it is found that approximately 60% of south Tipperary is designated as being extremely or highly vulnerable. The groundwater protection plan was devised subsequent to an understanding of the aquifer systems, an assessment of the vulnerability, and a review of the Irish planning system and environmental law. It is recommended that the plan be integrated into the county development plan for legislative purposes. A series of acceptability matrices were devised to restrict potentially polluting activities in vulnerable areas while maintaining a balance between protection of the groundwater resource and the need to site essential developments.

Litosol: suas características e provável gênese

Some of the characteristics peculiar to Litosois are discussed based on data published on Litosois occurring in the States of São Paulo and Paraná. Litosois are the first stages of development of a soil. Litosois probably originate through the exposure of the rockbed caused by an excessive relief. Rock weathering processes are intensive, prevailing those of chemical nature rather than those processes in which physical phenomena dominate. The A horizon has a high organic matter content (2% to 10%). Silt and clay amount to approximately 50% of the fine earth in the A horizon, with the exception of Litosois originated from sandstone and granite. The SiO2/Al2O3 relationship of the soil's colloidal complex and the clay's cation exchange capacity indicate that it is quite probable the presence of 2:1 type clay in Litosois derived from basic rocks.

Permian-polysulphide-siderite-barite-haematite deposit Rude in Samoborska Gora Mts., Zagorje-Mid-Transdanubian zone of the Inner Dinarides

Samoborska Gora Mts. is situated within the westernmost part of the Zagorje-Mid-Transdanubian zone of the Internal Dinarides. The Samoborska Gora Mts. predominantly consists of Permian unmetamorphosed siliciclastic sediments and evaporites, overlain by Lower Triassic sediments. Rude mineralisation is hosted by Permian siliciclastic sediments, below gypsum and anhydrite strata. The central part of the deposit consists of a 1.5 km long stratabound mineralisation, grading laterally into ferruginous sandstone and protruding vertically into a gypsum-anhydrite layer. Siderite-polysulphide-barite-quartz veins are located below the stratabound mineralisation. The stratiform part of the deposit is situated above the stratabound and consists of haematite layer with barite concretions and veinlets. Late stage galena-barite veins overprint earlier types of mineralisation. The Rude ore deposit was generated by predominantly NaCl +/- CaCl(2)-H(2)O solutions. Detrital quartz from stratiform mineralisation contains fluid inclusions with salinities between 7 and 11 wt. % NaCl equ., homogenizing between 150 degrees C to 230 degrees C. Stratabound/siderite-polysulphide-barite-quartz vein type mineralisation was derived from solutions with salinities between 5 and 19 wt. % NaCl equ., homogenizing between 60 degrees C and 160 degrees C, while late stage galenabarite veins were precipitated from solutions with salinities between 11 and 16 wt. % NaCl equ., homogenizing between 100 degrees C to 140 degrees C. Fluid inclusion bulk leachate chemistry recorded Na(+)> Mg(2+)>K(+)>Ca(2+)>Li(+) and Cl-> SO(4)(2-) ions. Sulphur isotope composition of barites and overlying gypsum stems from Permian seawater sulphate, supported by increased Br(-) content, which follows successively the seawater evaporation line. The sulphur isotopic composition of sulphides varies between -0.2 and + 12.5 parts per thousand , as a result of thermal reduction of Permian marine sulphate. Ore-forming fluids were produced by hydrothermal convective cells (reflux brine model), and were derived primarily from Permian seawater, modified by evaporation and interaction with Permian sedimentary rocks. Rude deposits in Samoborska Gora Mts. may be declared as a prototype of the Permian siderite-polysulphide-barite deposits (products of rifting along the passive Gondwana margin), in the Inner Dinarides, and their equivalents extending northeastward into the Zagorje-Mid-Transdanubian Zone and the Gemerides, and southeastward to the Hellenide-Albanides.

Sedimentary record of the northward flight of India and its collision with Eurasia (Ladakh Himalaya, India)

Stratigraphic and petrographic analysis of the Cretaceous to Eocene Tibetan sedimentary succession has allowed us to reinterpret in detail the sequence of events which led to closure of Neotethys and continental collision in the NW Himalaya. During the Early Cretaceous, the Indian passive margin recorded basaltic magmatic activity. Albian volcanic arenites, probably related to a major extensional tectonic event, are unconformably overlain by an Upper Cretaceous to Paleocene carbonate sequence, with a major quartzarenite episode triggered by the global eustatic sea-level fall at the Cretaceous/Tertiary boundary. At the same time, Neotethyan oceanic crust was being subducted beneath Asia, as testified by calc-alkalic volcanism and forearc basin sedimentation in the Transhimalayan belt. Onset of collision and obduction of the Asian accretionary wedge onto the Indian continental rise was recorded by shoaling of the outer shelf at the Paleocene/Eocene boundary, related to flexural uplift of the passive margin. A few My later, foreland basin volcanic arenites derived from the uplifted Asian subduction complex onlapped onto the Indian continental terrace. All along the Himalaya, marine facies were rapidly replaced by continental redbeds in collisional basins on both sides of the ophiolitic suture. Next, foreland basin sedimentation was interrupted by fold-thrust deformation and final ophiolite emplacement. The observed sequence of events compares favourably with theoretical models of rifted margin to overthrust belt transition and shows that initial phases of continental collision and obduction were completed within 10 to 15 My, with formation of a proto-Himalayan chain by the end of the middle Eocene.

Stratigraphic significance of siliceous microfossils collected during Nautiperc dives (Off Peru, 5°-6° S)

The geological evolution of the northern Peru convergent margin can be traced using samples collected during deep-sea dives of the submersible Nautile. In the Paita area (5 degrees-6 degrees S), the sedimentary sequence was intensively sampled along the main scarp of the middle slope area. It consists of Upper Miocene (7-9 Ma) to Pleistocene siltstone, sandstone and rare dolostone. The age distribution of these samples is the basis for a new geologic interpretation of the multichannel seismic line CDP3. Siliceous microfossils (both diatoms and radiolarians) show influence of both cold and temperate waters (local species mixed with upwelling ones). Diatom assemblages studied from the NP1-13 and NP1-15 dives bear a strong resemblance to assemblages from the Pisco Formation of southern Peru. Micropaleontological data from siliceous microfossils, provide evidence for two main unconformities, one is at the base of the Quaternary sequence and the other corresponds to a hiatus of 1 Myr, separating the Upper Miocene (7-8 Ma) sediments from uppermost Miocene (5-6 Ma) sediments. During the past 400 kyr, a wide rollover fold developed in the middle slope area associated with a major seaward dipping detachment fault. A catastrophic debris avalanche occurred as the result of an oversteepening of the landward flank of the rollover fold. The gravity failure of the slope, recognized by SeaBEAM and hydrosweep mapping, displaced enough material to produce a destructive tsunami which occurred 13.8 +/- 2.7 kyr ago.

Lutzomyia maruaga (Diptera: Psychodidae), a new bat-cave sand fly from Amazonas, Brazil

A new species of parthenogenetic, autogenic and apparently extremely endemic phlebotomine is described from a sandstone cave located in primary terra firme forest to the North of the city of Manaus. Specimens were collected in the aphotic zone of the Refúgio do Maruaga cave by light trap and reared from bat guano. The adult morphology suggests a closer relationship to some Old World Phlebotominae than to species of Lutzomyia França encountered in the surrounding rainforest, but it shares characteristics with the recently proposed Neotropical genera Edentomyia Galati, Deanemyia Galati and Oligodontomyia Galati.

Biotic effects of the Chicxulub impact, K-T catastrophe and sea level change in Texas

Biotic effects of the Chicxulub impact, the K-T event and sea level change upon planktic foraminifera were evaluated in a new core and outcrops along the Brazos River, Texas, about 1000 km from the Chicxulub impact crater on Yucatan, Mexico. Sediment deposition occurred in a middle neritic environment that shallowed to inner neritic depths near the end of the Maastrichtian. The sea level fall scoured submarine channels, which were infilled by a sandstone complex with reworked Chicxulub impact spherules and clasts with spherules near the base. The original Chicxulub impact ejecta layer was discovered 45-60 cm below the sandstone complex, and predates the K-T mass extinction by about 300,000 years. Results show that the Chicxulub impact caused no species extinctions or any other significant biotic effects. The subsequent sea level fall to inner neritic depth resulted in the disappearance of all larger (>150 mu m) deeper dwelling species creating a pseudo-mass extinction and a survivor assemblage of small surface dwellers and low oxygen tolerant taxa. The K-T boundary and mass extinction was identified 40-80 cm above the sandstone complex where all but some heterohelicids, hedbergellids and the disaster opportunistic guembelitfids went extinct, coincident with the evolution of first Danian species and the global delta(13)C shift. These data reveal that sea level changes profoundly influenced marine assemblages in near shore environments, that the Chicxulub impact and K-T mass extinction are two separate and unrelated events, and that the biotic effects of this impact have been vastly overestimated. (C) 2008 Elsevier B.V. All rights reserved.

Synchrotron-based X-ray tomographic microscopy for rock physics investigations

Synchrotron radiation X-ray tomographic microscopy is a nondestructive method providing ultra-high-resolution 3D digital images of rock microstructures. We describe this method and, to demonstrate its wide applicability, we present 3D images of very different rock types: Berea sandstone, Fontainebleau sandstone, dolomite, calcitic dolomite, and three-phase magmatic glasses. For some samples, full and partial saturation scenarios are considered using oil, water, and air. The rock images precisely reveal the 3D rock microstructure, the pore space morphology, and the interfaces between fluids saturating the same pore. We provide the raw image data sets as online supplementary material, along with laboratory data describing the rock properties. By making these data sets available to other research groups, we aim to stimulate work based on digital rock images of high quality and high resolution. We also discuss and suggest possible applications and research directions that can be pursued on the basis of our data.

RAGBRAI Learn about the Land; Day 5, July 2008

Today, after you descend into the valley of the Iowa River north of Marengo, the route turns east on county road F15 and approaches the historic Amana Society. Settled in the late 1850s by German immigrants of the Community of True Inspiration, the new arrivals utilized the local timber and stone resources to construct their buildings. During these early years several stone quarries were opened in the hills along the north wall of the Iowa River valley near East, Middle, and West Amana. Riders will pass close to one of these old quarries 0.7 miles west of West Amana. The stone taken from these quarries is beautiful quartz-rich sandstone that is cemented by light brown to orange tinged iron oxide. This stone was used in the construction of many buildings in Amana.