A hiány újratermelése (The reproduction of shortage)

Sporadic lack of consumer articles, the housing shortage, disturbances of material supply, and shortages of investment goods and of labour may be traced back to a common main cause. Shortage is constantly reproduced by specific features of the economic mechanism. The first part of the article consists of micro-analysis, mainly of the productive enterprise. Efforts to increase production may run up against ceilings of three kinds: constraints on physical resources, constraints on demand, and the budget constraint on enterprises. It is an important feature of a system which of these constraints takes effect. Resource-constrained systems can be distinguished from demand-constrained ones here. In the former, production is limited by production bottlenecks, in the latter by buyer demand. The socialist economy in its "classical" form belongs to the former type. It is related to whether the budget constraint on the enterprise is "hard" or "soft". If hard, enterprise spending is limited by its financial scope, if soft (its losses offset almost automatically) its demand becomes almost insatiable. The second part performs a macro-analysis, showing the mechanism of "suction" with the aid of a hydraulic analogy. The enterprise sector "pumps away" reserves and surpluses of the system, mainly due to the "investment hunger" that appears in the wake of expansionist efforts. Finally the article discusses briefly the interrelations between shortage and inflation.

From ‘poor parenting’ to micro-management:coalition governance and the sponsorship of arm’s-length bodies in the United Kingdom, 2010–13

The delegation of public tasks to arm’s-length bodies remains a central feature of contemporary reform agendas within both developed and developing countries. The role and capacity of political and administrative principals (i.e. ministers and departments of state) to control the vast network of arm’s-length bodies for which they are formally responsible is therefore a critical issue within and beyond academe. In the run-up to the 2010 General Election in the United Kingdom, the ‘quango conundrum’ emerged as an important theme and all three major parties committed themselves to shift the balance of power back towards ministers and sponsor departments. This article presents the results of the first major research project to track and examine the subsequent reform process. It reveals a stark shift in internal control relationships from the pre-election ‘poor parenting’ model to a far tighter internal situation that is now the focus of complaints by arm’s-length bodies of micro-management. This shift in the balance of power and how it was achieved offers new insights into the interplay between different forms of governance and has significant theoretical and comparative relevance. Points for practitioners: For professionals working in the field of arm’s-length governance, the article offers three key insights. First, that a well-resourced core executive is critical to directing reform given the challenges of implementing reform in a context of austerity. Second, that those implementing reform will also need to take into account the diverse consequences of centrally imposed reform likely to result in different departments with different approaches to arm’s-length governance. Third, that reforming arm’s-length governance can affect the quality of relationships, and those working in the field will need to mitigate these less tangible challenges to ensure success.

Commentary on Locke's Second Treatise on Government (1690)

Extracts from a treatise in which Locke sets out his labour theory of property.
Locke's writings on the labour theory of property provided eighteenth century proponents of the concept of copyright at common law (that is, copyright as a natural authorial property right) with a philosophical basis upon which to develop their arguments. The commentary explores the significance of a series of correspondence between John Locke and Edward Clarke, then MP for Taunton, concerning the lapse of the Licensing Act 1662 (uk_1662), and in the run up to the passing of the Statute of Anne 1710 (uk_1710). The commentary argues that, regardless of how Locke's writings on property were subsequently co-opted in the mid-eighteenth century debates as to the nature of copyright, it is doubtful whether Locke himself considered that copyright existed at common law.

The Role of Corals on Tsunami Dynamics in an Island Setting: A Case Study of Tutuila Island

Thesis (Ph.D.)--University of Washington, 2016-07

The Effect of Marine Protected Areas on Fishers' Income in the Philippines

The fisheries sector is vital to the Philippine economy, providing substantial employment and income, contributing export earnings, and meeting local food security and nutrition requirements. To protect coastal and marine habitat and to sustain fisheries, over 1000 marine protected areas (MPAs) have been established, in the Philippines. This paper provides empirical evidence on the variance of net revenues linked with MPA establishment and the possible range of relocation costs for fishing effort displaced by an MPA. A total of 424 households were randomly selected from 18 barangays (villages) adjacent to MPAs in three regions in the Philippines. Results show that incomes decrease significantly for both fulltime and seasonal types of fishers after 1-3 years of MPA establishment. The loss occurring through MPA is higher than expected and at least on the short run (up to 4 years) the spill-over effect does not compensate. This information helped to determine the necessary conditional cash transfers for coastal communities who are highly dependent on coastal and marine resources.

Sedimentary evidence for a mid-Holocene iceberg-generated tsunami in a coastal lake, west Greenland

We report sedimentological evidence for a tsunami from a coastal lake at Innaarsuit, Disko Bugt (west Greenland), which was most likely generated by a rolling iceberg. The tsunami invaded the lake c. 6000 years ago, during a period of time when relative sea level (RSL) was falling quickly because of isostatic rebound. We use the background rate of RSL fall, together with an age model for the sediment sequence, to infer a minimum wave run-up during the event of c. 3.3 m. The stratigraphic signature of the event bears similarities to that described from studies of the early-Holocene Storegga slide tsunami in Norwegian coastal basins. Conditions conducive to iceberg tsunami include a supply of icebergs, deep water close to the shore, a depositional setting protected from storms or landslide tsunami, and a coastal configuration that has the potential to amplify the height of tsunami waves as water depths shallow and the waves approach and impact the coast. Future warming of polar regions will lead to increased calving and iceberg production, at a time when human use of polar coasts will also grow. We predict, therefore, that iceberg-generated tsunami will become a growing hazard in polar coastal waters, especially in areas adjacent to large, fast-flowing, marine-terminating ice streams that are close to human populations or infrastructure.

How did the AD 1755 tsunami impact on sand barriers across the southern coast of Portugal?

Tsunamis are highly energetic events that may destructively impact the coast. Resolving the degree of coastal resilience to tsunamis is extremely difficult and sometimes impossible. In part, our understanding is constrained by the limited number of contemporaneous examples and by the high dynamism of coastal systems. In fact, longterm changes of coastal systems can mask the evidence of past tsunamis, leaving us a short or incomplete sedimentary archive. Here, we present a multidisciplinary approach involving sedimentological, geomorphological and geophysical analyses and numerical modelling of the AD 1755 tsunami flood on a coastal segment located within the southern coast of Portugal. In particular, the work focuses on deciphering the impact of the tsunami waves over a coastal sand barrier enclosing two lowlands largely inundated by the tsunami flood. Erosional features documented by geophysical data were assigned to the AD 1755 eventwith support of sedimentological and age estimation results. Furthermore, these features allowed the calibration of the simulation settings to reconstruct the local conditions and establish the run-up range of the AD 1755 tsunami when it hit this coast (6– 8 m above mean sea level). Our work highlights the usefulness of erosional imprints preserved in the sediment record to interpret the impact of the extreme events on sand barriers

EFECTOS TERRITORIALES DEL TSUNAMI DEL 27 DE FEBRERO DE 2010 EN LA COSTA DE LA REGIÓN DEL BIO-BÍO, CHILE

El 27 de febrero de 2010 la costa de Chile central fue afectada por terremoto Mw=8.8 el cual generó un tsunami de magnitud 4 que asoló principalmente bahías pequeñas en un tramo costero de 800 km. Unas 484 personas perdieron la vida. En la Región del Bio-Bío, murieron 199 personas ya que en este sector se localiza la segunda conurbación más importante del país. Con el propósito de analizar los efectos territoriales generados por este tsunami en la costa de la región, se iniciaron trabajos de terreno para determinar la altura y run-up de la ola, catastrar los efectos sobre la población y localizar sectores de mayor impacto. Estas actividades están posibilitando generar estudios de vulnerabilidad para diferentes localidades de la región, comparando escenarios pre y post tsunami para generar mapas de riesgo por tsunami para eventos de similares características, que sirvan posteriormente como instrumentos de gestión del riesgo. En esta contribución, se presentan los resultados de los trabajos de campo realizados en siete localidades afectadas por el tsunami (Tirúa, Lebu, Tubul-Raqui, LLico, Coliumo, Laraquete y Arauco). En estos sectores, las áreas inundadas fluctúan entre 59 y 458 has, con alturas de ola entre 3 y 30 m.

Developing guidelines for intervention to reduce risk of low-speed vehicle run-overs of young children

In Australia, research suggests that up to one quarter of child pedestrian hospitalisations result from driveway run-over incidents (Pinkney et al., 2006). In Queensland, these numbers equate to an average of four child fatalities and 81 children presenting at hospital emergency departments every year (The Commission for Children, Young People and Child Guardian). National comparison shows that these numbers represent a slightly higher per capita rate (23.5% of all deaths). To address this issue, the current research was undertaken with the aim to develop an educative intervention based on data collected from parents and caregivers of young children. Thus, the current project did not seek to use available intervention or educational material, but to develop a new evidence-based intervention specifically targeting driveway run-overs involving young children. To this end, general behavioural and environmental changes that caregivers had undertaken in order to reduce the risk of injury to any child in their care were investigated. Broadly, the first part of this report sought to: • develop a conceptual model of established domestic safety behaviours, and to investigate whether this model could be successfully applied to the driveway setting; • explore and compare sources of knowledge regarding domestic and driveway child safety; and • examine the theoretical implications of current domestic and driveway related behaviour and knowledge among caregivers. The aim of the second part of this research was to develop and test the efficacy of an intervention based on the findings in the first part of the research project. Specifically, it sought to: • develop an educational driveway intervention that is based on current safety behaviours in the domestic setting and informed by existing knowledge of driveway safety and behaviour change theory; and • evaluate its efficacy in a sample of parents and caregivers.

Systematic literature review of incidence rates of low-speed vehicle run-over incidents in children

Aim: To systematically review the literature investigating the incidence of fatal and or nonfatal low-speed vehicle run-over (LSVRO) incidents in children aged 0–15 years. Methods: The following databases were searched using specific search terms, from their date of conception up to June 2011: Cochrane Library, Medline, CINAHL, Embase, AMI, Sociological Abstracts, ERIC, PsycArticles, PsycInfo, Urban Studies and Planning; Australian Criminology Database; Dissertations and Thesis; Academic Research Library; Social Services Abstracts; Family and Society; Scopus; and Web of Science. A total of 128 articles were identified in the databases (33 found by hand searching). The title and abstract of these were read, and 102 were removed because they were not primary research articles relating to LSVRO-type injuries. Twenty-six articles were assessed against the inclusion (reporting population level incidence rates) and exclusion criteria, 19 of which were excluded, leaving a total of five articles for inclusion in the review. Findings: Five studies were identified that met the inclusion criteria. The incidence rate in nonfatal LSVRO events varied in the range of 7.09 to 14.79 per 100,000 and from 0.63 to 3.2 per 100,000 in fatal events. Discussion: Using International Classification of Diseases codes for classifying fatal or nonfatal LSVRO incidents is problematic as there is no specific code for LSVRO. The current body of research is void of a comprehensive secular population data analysis. Only with an improved spectrum of incidence rates will appropriate evaluation of this problem be possible, and this will inform nursing prevention interventions. The effect of LSVRO incidents is clearly understudied. More research is required to address incidence rates in relation to culture, environment, risk factors, car design, and injury characteristics. Conclusions: Thevlack of nursing research or policy around this area of injury, most often to children, indicates a field of inquiry and policy development that needs attention.

Scale-up criteria of square tank surface aerator

Oxygen transfer rate and the corresponding power requirement to operate the rotor are vital for design and scale-up of surface aerators. Present study develops simulation or scale-up criterion correlating the oxygen transsimulation fer coefficient and power number along with a parameter governing theoretical power per unit volume (X, which is defined as equal to (FR1/3)-R-4/3, where F and R are impellers' Fronde and Reynolds number, respectively). Based on such scale-up criteria, design considerations are developed to save energy requirements while designing square tank surface aerators. It has been demonstrated that energy can be saved substantially if the aeration tanks are run at relatively higher input powers. It is also demonstrated that smaller sized tanks are more energy conservative and economical when compared to big sized tanks, while aerating the same volume of water, and at the same time by maintaining a constant input power in all the tanks irrespective of their size. An example illustrating how energy can be reduced while designing different sized aerators is given. The results presented have a wide application in biotechnology and bioengineering areas with a particular emphasis on the design of appropriate surface aeration systems.

Scale-up criteria of square tank surface aerator

Oxygen transfer rate and the corresponding power requirement to operate the rotor are vital for design and scale-up of surface aerators. Present study develops simulation or scale-up criterion correlating the oxygen transsimulation fer coefficient and power number along with a parameter governing theoretical power per unit volume (X, which is defined as equal to (FR1/3)-R-4/3, where F and R are impellers' Fronde and Reynolds number, respectively). Based on such scale-up criteria, design considerations are developed to save energy requirements while designing square tank surface aerators. It has been demonstrated that energy can be saved substantially if the aeration tanks are run at relatively higher input powers. It is also demonstrated that smaller sized tanks are more energy conservative and economical when compared to big sized tanks, while aerating the same volume of water, and at the same time by maintaining a constant input power in all the tanks irrespective of their size. An example illustrating how energy can be reduced while designing different sized aerators is given. The results presented have a wide application in biotechnology and bioengineering areas with a particular emphasis on the design of appropriate surface aeration systems.

Apparatus and method for heat-run test on high-power PWM converters with low energy expenditure

Before installation, a voltage source converter is usually subjected to heat-run test to verify its thermal design and performance under load. For heat-run test, the converter needs to be operated at rated voltage and rated current for a substantial length of time. Hence, such tests consume huge amount of energy in case of high-power converters. Also, the capacities of the source and loads available in the research and development (R&D) centre or the production facility could be inadequate to conduct such tests. This paper proposes a method to conduct heat-run tests on high-power, pulse width modulated (PWM) converters with low energy consumption. The experimental set-up consists of the converter under test and another converter (of similar or higher rating), both connected in parallel on the ac side and open on the dc side. Vector-control or synchronous reference frame control is employed to control the converters such that one draws certain amount of reactive power and the other supplies the same; only the system losses are drawn from the mains. The performance of the controller is validated through simulation and experiments. Experimental results, pertaining to heat-run tests on a high-power PWM converter, are presented at power levels of 25 kVA to 150 kVA.