957 resultados para Root Mean Square (rms) Error
Resumo:
The main focus and concerns of this PhD thesis is the growth of III-V semiconductor nanostructures (Quantum dots (QDs) and quantum dashes) on silicon substrates using molecular beam epitaxy (MBE) technique. The investigation of influence of the major growth parameters on their basic properties (density, geometry, composition, size etc.) and the systematic characterization of their structural and optical properties are the core of the research work. The monolithic integration of III-V optoelectronic devices with silicon electronic circuits could bring enormous prospect for the existing semiconductor technology. Our challenging approach is to combine the superior passive optical properties of silicon with the superior optical emission properties of III-V material by reducing the amount of III-V materials to the very limit of the active region. Different heteroepitaxial integration approaches have been investigated to overcome the materials issues between III-V and Si. However, this include the self-assembled growth of InAs and InGaAs QDs in silicon and GaAx matrices directly on flat silicon substrate, sitecontrolled growth of (GaAs/In0,15Ga0,85As/GaAs) QDs on pre-patterned Si substrate and the direct growth of GaP on Si using migration enhanced epitaxy (MEE) and MBE growth modes. An efficient ex-situ-buffered HF (BHF) and in-situ surface cleaning sequence based on atomic hydrogen (AH) cleaning at 500 °C combined with thermal oxide desorption within a temperature range of 700-900 °C has been established. The removal of oxide desorption was confirmed by semicircular streaky reflection high energy electron diffraction (RHEED) patterns indicating a 2D smooth surface construction prior to the MBE growth. The evolution of size, density and shape of the QDs are ex-situ characterized by atomic-force microscopy (AFM) and transmission electron microscopy (TEM). The InAs QDs density is strongly increased from 108 to 1011 cm-2 at V/III ratios in the range of 15-35 (beam equivalent pressure values). InAs QD formations are not observed at temperatures of 500 °C and above. Growth experiments on (111) substrates show orientation dependent QD formation behaviour. A significant shape and size transition with elongated InAs quantum dots and dashes has been observed on (111) orientation and at higher Indium-growth rate of 0.3 ML/s. The 2D strain mapping derived from high-resolution TEM of InAs QDs embedded in silicon matrix confirmed semi-coherent and fully relaxed QDs embedded in defectfree silicon matrix. The strain relaxation is released by dislocation loops exclusively localized along the InAs/Si interfaces and partial dislocations with stacking faults inside the InAs clusters. The site controlled growth of GaAs/In0,15Ga0,85As/GaAs nanostructures has been demonstrated for the first time with 1 μm spacing and very low nominal deposition thicknesses, directly on pre-patterned Si without the use of SiO2 mask. Thin planar GaP layer was successfully grown through migration enhanced epitaxy (MEE) to initiate a planar GaP wetting layer at the polar/non-polar interface, which work as a virtual GaP substrate, for the GaP-MBE subsequently growth on the GaP-MEE layer with total thickness of 50 nm. The best root mean square (RMS) roughness value was as good as 1.3 nm. However, these results are highly encouraging for the realization of III-V optical devices on silicon for potential applications.
Resumo:
Previous attempts to apply statistical models, which correlate nutrient intake with methane production, have been of limited. value where predictions are obtained for nutrient intakes and diet types outside those. used in model construction. Dynamic mechanistic models have proved more suitable for extrapolation, but they remain computationally expensive and are not applied easily in practical situations. The first objective of this research focused on employing conventional techniques to generate statistical models of methane production appropriate to United Kingdom dairy systems. The second objective was to evaluate these models and a model published previously using both United Kingdom and North American data sets. Thirdly, nonlinear models were considered as alternatives to the conventional linear regressions. The United Kingdom calorimetry data used to construct the linear models also were used to develop the three. nonlinear alternatives that were ball of modified Mitscherlich (monomolecular) form. Of the linear models tested,, an equation from the literature proved most reliable across the full range of evaluation data (root mean square prediction error = 21.3%). However, the Mitscherlich models demonstrated the greatest degree of adaptability across diet types and intake level. The most successful model for simulating the independent data was a modified Mitscherlich equation with the steepness parameter set to represent dietary starch-to-ADF ratio (root mean square prediction error = 20.6%). However, when such data were unavailable, simpler Mitscherlich forms relating dry matter or metabolizable energy intake to methane production remained better alternatives relative to their linear counterparts.
Resumo:
We examine how the accuracy of real-time forecasts from models that include autoregressive terms can be improved by estimating the models on ‘lightly revised’ data instead of using data from the latest-available vintage. The benefits of estimating autoregressive models on lightly revised data are related to the nature of the data revision process and the underlying process for the true values. Empirically, we find improvements in root mean square forecasting error of 2–4% when forecasting output growth and inflation with univariate models, and of 8% with multivariate models. We show that multiple-vintage models, which explicitly model data revisions, require large estimation samples to deliver competitive forecasts. Copyright © 2012 John Wiley & Sons, Ltd.
Resumo:
Current feed evaluation systems for ruminants are too imprecise to describe diets in terms of their acidosis risk. The dynamic mechanistic model described herein arises from the integration of a lactic acid (La) metabolism module into an extant model of whole-rumen function. The model was evaluated using published data from cows and sheep fed a range of diets or infused with various doses of La. The model performed well in simulating peak rumen La concentrations (coefficient of determination = 0.96; root mean square prediction error = 16.96% of observed mean), although frequency of sampling for the published data prevented a comprehensive comparison of prediction of time to peak La accumulation. The model showed a tendency for increased La accumulation following feeding of diets rich in nonstructural carbohydrates, although less-soluble starch sources such as corn tended to limit rumen La concentration. Simulated La absorption from the rumen remained low throughout the feeding cycle. The competition between bacteria and protozoa for rumen La suggests a variable contribution of protozoa to total La utilization. However, the model was unable to simulate the effects of defaunation on rumen La metabolism, indicating a need for a more detailed description of protozoal metabolism. The model could form the basis of a feed evaluation system with regard to rumen La metabolism.
Resumo:
O objetivo do presente estudo foi comparar as relações torque-ângulo (T-A) e torque-velocidade (T-V) de bailarinas clássicas (n=14) e atletas de voleibol (n=22). O torque máximo (Tmax) da musculatura flexora plantar (FP) do tornozelo foi avaliada durante contrações isométricas voluntárias máximas nos ângulos de -10°, 0°, 10°, 20°, 30°, 40° e 50° de FP, e durante contrações isocinéticas voluntárias máximas nas velocidades angulares de 60°/s, 120°/s, 180°/s, 240°/s, 300°/s, 360°/s e 420°/s. Além do Tmax, o torque produzido nos ângulos articulares de -10° (T-10°), 10° (T10°) e 30° (T30°) também foi avaliado nas mesmas velocidades angulares. A ativação elétrica dos músculos gastrocnêmio medial (GM) e sóleo (SOL) direitos de cada indivíduo foi monitorada com eletrodos de eletromiografia (EMG) de superfície em configuração bipolar. Uma relação linear foi observada entre o Tmax e o aumento dos ângulos de FP nas atletas de voleibol Um deslocamento dessa relação em direção a maiores ângulos de FP (menores comprimentos musculares) ocorreu no grupo das bailarinas, com o aparecimento de um platô em menores ângulos de FP (maiores comprimentos musculares). Durante as contrações isocinéticas, uma relação hiperbólica foi observada entre o Tmax, T-10° e T10° com o aumento da velocidade angular nos dois grupos. Entretanto, em T30° as atletas de voleibol produziram valores superiores de torque nas velocidades angulares mais elevadas. Os valores root mean square (RMS) dos músculos GM e SOL foram mais elevados nas bailarinas que nas atletas de voleibol, tanto nas contrações isométricas quanto nas isocinéticas. Uma diminuição na ativação do GM e do SOL ocorreu com a diminuição da FP nas atletas de voleibol, enquanto os valores RMS se mantiveram estáveis para as bailarinas ao longo de todos os ângulos testados. Os resultados apresentados nesse estudo suportam a hipótese de que a atividade física sistemática provoca alteração nas propriedades intrínsecas musculares e ativação muscular, modificando assim, as relações T-A e T-V.
Resumo:
A literatura tem mostrado, por intermédio de estudos com animais e seres humanos, que o uso reduzido da musculatura (como por exemplo, a imobilização de um segmento) produz uma série de alterações estruturais e funcionais no músculo esquelético. As principais alterações observadas no músculo após a redução do uso estão relacionadas com alterações nas propriedades bioquímicas, na composição de fibras musculares, atrofia muscular, redução na capacidade de produção de força, e redução na capacidade de ativação. Apesar de a maior parte dos estudos sobre o assunto ter sido realizada em modelos animais (os quais possibilitam o estudo invasivo dos mecanismos de adaptação), a incidência de lesões articulares em seres humanos tem motivado os pesquisadores a buscar métodos alternativos e nãoinvasivos para o diagnóstico e acompanhamento das lesões articulares. Tendo em vista que a mecanomiografia (MMG) é uma técnica não-invasiva que permite o estudo do comportamento mecânico e fisiológico do músculo, acredita-se que esta técnica, associada com a avaliação da capacidade de produção de força e com a eletromiografia (EMG), possa ser um método útil no diagnóstico das alterações produzidas por essas lesões e no acompanhamento de programas de reabilitação. O objetivo desse estudo foi avaliar as adaptações musculares após um período de imobilização de duas semanas. Três estudos foram desenvolvidos, sendo os dois primeiros com seres humanos e o terceiro em um modelo animal. O primeiro estudo avaliou as respostas eletromiográficas, mecanomiográficas e de torque dos músculos flexores plantares e dos flexores dorsais do tornozelo durante esforço voluntário. Foram avaliados 23 indivíduos que tiveram seus tornozelos imobilizados em função de um entorse de grau II, e 32 indivíduos saudáveis, que fizeram parte do grupo controle. O segundo estudo, por sua vez, investigou as alterações no comportamento mecânico dos mesmos grupos musculares do estudo 1, ao longo de um protocolo de contrações produzidas via estimulação elétrica, utilizando-se várias freqüências de estimulação (de 5 a 60 Hz). Nos dois estudos, os valores de torque dos flexores plantares e dos flexores dorsais no grupo imobilizado foram significativamente inferiores aos do grupo controle. Essa redução foi mais evidente nos flexores plantares do que nos flexores dorsais. Os valores root mean square (RMS) do sinal EMG, durante a CVM (estudo 1), foram significativamente menores nos músculos gastrocnêmio medial (GM), sóleo (SOL) e tibial anterior (TA) do grupo que foi imobilizado quando comparado ao grupo controle. A mediana da freqüência (MDF) do sinal EMG, durante a CVM, no estudo 1, não apresentou diferença significativa entre os dois grupos da amostra, em nenhum dos três músculos estudados (GM, SOL e TA). Os valores RMS e a MDF do sinal MMG dos músculos GM, SOL e TA não apresentaram diferenças significativas entre os dois grupos da amostra, em nenhum dos dois estudos, indicando que a técnica da MMG não foi capaz de revelar as alterações musculares produzidas por um período de imobilização. O terceiro estudo avaliou as alterações das propriedades mecânicas devido a alterações no comprimento muscular e na freqüência de estimulação nos músculos SOL de 3 gatos. As relações força-comprimento foram estabelecidas ao nível articular, muscular, das fibras musculares e dos sarcômeros. Os resultados demonstraram que as variações de comprimento da fibra diferem das variações de comprimento do músculo como um todo, principalmente nos comprimentos mais encurtados. Existe um maior encurtamento da fibra com o aumento da freqüência de estimulação nos menores comprimentos musculares, enquanto nos maiores comprimentos musculares o aumento da freqüência de estimulação tem um efeito similar sobre as fibras e o músculo como um todo. Os principais achados do presente estudo são de que as respostas da EMG e de torque são alteradas por um período de 2 semanas de imobilização, enquanto as respostas da MMG não, e que o comprimento muscular é uma importante variável que deve ser controlada a nível tanto das fibras musculares, quanto dos componentes elásticos no estudo das propriedades mecânicas do músculo esquelético.
Resumo:
O objetivo deste trabalho foi verificar a atividade elétrica dos músculos oblíquo externo, reto femoral e das porções supra-umbilical e infra-umbilical do reto abdominal, durante a execução de determinados exercícios abdominais realizados no meio líquido. A amostra foi composta por 20 (vinte) mulheres adaptadas ao meio líquido, com idade entre 21 e 29 anos. A atividade elétrica foi coletada com eletrodos de superfície, sendo o sistema de coleta de dados previamente adaptado, evitando o contato com a água. O exercício de flexão de tronco até a posição sentada, realizado em seco, foi utilizado como referência, sendo o valor root mean square (RMS), da fase ascendente deste exercício, empregado para a normalização da amplitude do sinal coletado durante os demais exercícios. Flexões de tronco e de quadril foram realizadas no meio líquido, na posição horizontal, com o apoio de um tubo nos membros superiores e em um ritmo padrão, sendo dois destes exercícios também realizados em máxima velocidade. Foi utilizado ANOVA two ways, em cada músculo, pelos fatores exercícios e fase. Para melhor compreender a ativação em cada fase, utilizou-se ANOVA one way no valor da fase ascendente de cada músculo pelo fator exercício, assim como somente nos valores da fase descendente. Para verificar onde estavam as diferenças, utilizou-se o Post Hoc de Tukey. Os dados foram também normalizados no tempo, sendo apresentados gráficos da atividade eletromiográfica dos músculos durante todo o ciclo de cada exercício. Ao analisar os exercícios como um todo, constatou-se que os exercícios aquáticos em ritmo padrão possuem menor atividade que o de referência Ao analisar a fase ascendente dos exercícios aquáticos em ritmo padrão, o músculo reto abdominal em todos os exercícios, e o oblíquo externo nos exercícios sem apoio são tão eficiente quanto o exercício referência, mostrando que a instabilidade da posição horizontalizada e a resistência ao movimento compensam a diminuição do peso hidrostático. Já na fase descendente, além de menor atividade, o padrão da atividade muscular modifica nos exercícios aquáticos, possivelmente, mantendo uma atividade de estabilização, enquanto outro grupo muscular é responsável pelo movimento. A realização do exercício em máxima velocidade apresentou uma grande atividade eletromiográfica dos músculos abdominais no meio líquido e, para o reto femoral, a amplitude de movimento foi muito importante para sua ativação. Dessa forma, a flexão de tronco em máxima velocidade é um exercício de grande atividade abdominal e baixa atividade dos flexores de quadril. As características das forças externas ao corpo, nos exercícios abdominais realizados no meio líquido, proporcionam uma situação única de redução de peso hidrostático, resistência ao movimento, apoio relativo e tendência de rotação para atingir o equilíbrio estável.
Resumo:
One of the current major concerns in engineering is the development of aircrafts that have low power consumption and high performance. So, airfoils that have a high value of Lift Coefficient and a low value for the Drag Coefficient, generating a High-Efficiency airfoil are studied and designed. When the value of the Efficiency increases, the aircraft s fuel consumption decreases, thus improving its performance. Therefore, this work aims to develop a tool for designing of airfoils from desired characteristics, as Lift and Drag coefficients and the maximum Efficiency, using an algorithm based on an Artificial Neural Network (ANN). For this, it was initially collected an aerodynamic characteristics database, with a total of 300 airfoils, from the software XFoil. Then, through the software MATLAB, several network architectures were trained, between modular and hierarchical, using the Back-propagation algorithm and the Momentum rule. For data analysis, was used the technique of cross- validation, evaluating the network that has the lowest value of Root Mean Square (RMS). In this case, the best result was obtained for a hierarchical architecture with two modules and one layer of hidden neurons. The airfoils developed for that network, in the regions of lower RMS, were compared with the same airfoils imported into the software XFoil
Resumo:
Patellofemoral pain syndrome (PFPS) is described as anterior or retropatellar pain knee in the absence of other pathologies and is frequently associated with dysfunction of the vastus medialis oblique (VMO). However, several studies have demonstrated the inability to selectively activate this muscle through exercise. To evaluate the effect of Neuromuscular Electrical Stimulation (NMES) selective VMO in women with syndrome. We evaluated thirty-eight women: twenty in the control group (24.15 ± 2.60 years) and eighteen diagnosed with PFPS (25.56 ± 3.55 years). Both groups were evaluated before and after a protocol of electro stimulation. To measure for comparing groups before and after treatment, we assessed the extensor torque concentric and eccentric knee through an isokinetic dynamometer, the intensity (Root Mean Square - RMS) and the onset of activation (onset) of VMO compared to the vastus lateralis (VL) in two types of exercise: open and closed kinetic chain. . Statistical analysis was performed using SPSS 15.0, with a significance level of 5%. Results: Our data showed an increase in the intensity of activation (RMS) of the VMO muscle after NMES in both study groups. During concentric contraction the RMS of the VMO before the NMES was 105.69 ± 32.26 μV and after a single intervention was 122.10 ± 39.62 μV (p = 0.048) for the control group. In the group with PPS, we found a similar behavior, with RMS of the VMO before NMES of 96.25 ± 18.83 μV and 139.80 ± 65.88 μV after the intervention (p = 0.0001). However, there was no evidence in the RMS value of VL muscle. The onset was calculated by subtracting the onset of VL by the onset of VMO. For the group with PFPS, the onset before the intervention was -0.007 ± 0.14 ms, indicating a delay of the VMO relative to VL, and after NMES was 0.074 ± 0.09 ms (p = 0.016), showing an activation previous VMO to VL. The same occurred for the control group. We also observed that NMES increased knee extensor power during the concentric contraction in both groups. Before the intervention the mean power was 28.97 ± 9.01 W for the PPS group and after NMES was 34.38 ± 7.61 W (p = 0.0001). Conclusion: We observed an increase in electromyographic activity of the VMO and also an anticipatory effect of this muscle
Resumo:
The reduction of physiological capacity present in the process of aging causes a marked decline in lung function. The exercise does promote several positive changes in the physical health of people and protect the cardiorespiratory function. The aim of this study was to investigate the effects of a program of Pilates exercices on the strengh and electrical activity of respiratory muscles of elderly. This is a randomized, controlled clinical trial, evaluating 33 elderly aged 65 and 80 (70.88 ± 4.32), healthy, sedentary, without cognitive impairment and able the practice physical activity. The sample was divided into two groups, one experimental group with 16 elderly women who did Pilates exercises and a control group (17) that was not submitted to the exercises, but received educational booklets on aging and health care. The elderly were evaluated initially and after a period of three months, taking into account the Maximal Inspiratory Pressure (MIP) and Maximal Expiratory Pressure (MEP), obtained by Manovacuometry and intensity of EMG activity was measured using the values of Root Mean Square (RMS) for the diaphragm and rectus abdominis muscles, during the course of diaphragmatic breathing and MIP maneuver. Data were analyzed using SPSS version 17.0. For all tests, we used a significance level or p value < 0.05 and confidence interval 95%. RMS in diaphragm and rectus abdominis muscles in both tests increased, but the data were significant for the rectus abdominis during diaphragmatic breathing (p = 0.03) and the diaphragm during the MIP maneuver (p = 0.01). There was no significant variation of the MIP and MEP. Pilates exercises were responsible for increasing the electrical activation of the diaphragm and rectus abdominis muscles in a group of healthy elderly, but had no influence on changes in strength of respiratory muscles
Resumo:
Exercise-induced muscle damage mainly affects individuals who returned to physical activity after a time without practicing it or had some kind of exhaustive exercise, particularly eccentric exercise. To evaluate the effect of cryotherapy and laser therapy in response to muscle damage induced by eccentric exercise on the biceps muscle. This was a randomized clinical trial consisting of 60 female subjects. All subjects initially underwent an evaluation consisting of perimetry, measurement of pain sensation (via algometry and visual analogue scale), electromyography and dynamometry. Then the subjects performed an exercise protocol on the isokinetic dynamometer consisting of 2 sets of 10 eccentric elbow flexors contraction at 60 °/s. Completed this protocol, an intervention was held according to a previously random group distribution: control group (no intervention), cryotherapy group and laser therapy group. Finally, subjects were re-evaluated immediately and 48 hours after the intervention protocol, except for Visual Analogue Scale (VAS), which was also evaluated 24 hours after exercise. The circumference of the limb, the pain sensation (VAS and algometry), the muscle activation amplitude (via Root Mean Square - RMS), median frequency, peak torque normalized per body weight, average peak torque, power and work were analyzed. The median frequency immediately after the intervention protocol on the cryotherapy group was the only variable that showed inter and intra-group differences; the remaining variables showed only intragroup differences. The perimetry values did not change immediately after the protocol on the groups which underwent cryotherapy and laser therapy, however, there was an increase after 48 hours; algometry values decreased in all groups for 48 hours and the VAS values increased 24 and 48 hours also for all groups. Regarding RMS no significant change was observed. For dynamometry, peak torque normalized per body weight and average peak torque had a similar behavior, with a reduction in the post protocol that has remained after 48 hours. For the power and work, a decrease was observed immediately after the protocol with a further reduction after 48 hours. Cryotherapy and laser therapy does not alter the muscle damage response, except for the perimetry values immediately after exercise.
Resumo:
This work aims to investigate the efficiency of digital signal processing tools of acoustic emission signals in order to detect thermal damages in grinding process. To accomplish such a goal, an experimental work was carried out for 15 runs in a surface grinding machine operating with an aluminum oxide grinding wheel and ABNT 1045. The acoustic emission signals were acquired from a fixed sensor placed on the workpiece holder. A high sampling rate data acquisition system at 2.5 MHz was used to collect the raw acoustic emission instead of root mean square value usually employed. Many statistics have shown effective to detect burn, such as the root mean square (RMS), correlation of the AE, constant false alarm (CFAR), ratio of power (ROP) and mean-value deviance (MVD). However, the CFAR, ROP, Kurtosis and correlation of the AE have been presented more sensitive than the RMS.
Resumo:
Background: The literature reports that the eccentric muscular action produces greater force and lower myoelectric activity than the concentric muscular action, while the heart rate (HR) responses are bigger during concentric contraction. Objectives: To investigate the maximum average torque (MAT), surface electromyographic (SEMG) and the heart rate (HR) responses during different types of muscular contraction and angular velocities in older men. Methods: Twelve healthy men (61.7 +/- 1.6years) performed concentric (C) and eccentric (E) isokinetic knee extension-flexion at 60 degrees/s and 120 degrees/s. SEMG activity was recorded from vastus lateralis muscle and normalized by Root Mean Square-RMS (mu V) of maximal isometric knee extension at 60 degrees. HR (beats/min) and was recorded at rest and throughout each contraction. The data were analyzed by the Friedman test for repeated measures with post hoc Dunn's test (p<0.05). Results: The median values of MAT (N.m/kg) was smaller and the RMS (mu V) was larger during concentric contraction (C60 degrees/s=2.80 and 0.99; C120 degrees/s=2.46 and 1.0) than eccentric (E60 degrees/s=3.94 and 0.85; E120 degrees/s=4.08 and 0.89), respectively. The HR variation was similar in the four conditions studied. Conclusion: The magnitude of MAT and RMS responses in older men were dependent of the nature of the muscular action and independent of the angular velocity, whereas HR response was not influenced by these factors.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
CONTEXTUALIZAÇÃO: A dor e a disfunção no complexo articular do ombro é comumente encontrada na prática fisioterapêutica. Essas anormalidades musculoesqueléticas estão relacionadas à instabilidade e inadequado funcionamento cinemático, que dependem da integridade dos tecidos musculares. Assim, no sentido de prevenir e reabilitar esses sintomas, o uso da haste oscilatória vem sendo implantado para melhorar os resultados de técnicas cinesioterapêuticas. OBJETIVOS: Analisar a atividade eletromiográfica (EMG) dos músculos que estabilizam a articulação do ombro durante a realização de exercícios com haste oscilatória e haste não-oscilatória. MÉTODOS: Participaram do estudo 12 voluntárias com idade de 20,4±1,9 anos. Os dados EMG foram coletados nos músculos trapézio superior (TrS), trapézio inferior (TrI) e deltoide médio (DM) durante três diferentes exercícios realizados com haste oscilatória e haste não-oscilatória. O sinal EMG foi analisado no domínio do tempo pelo cálculo do Root Mean Square (RMS). Os valores de RMS foram normalizados pelo valor de pico obtido em todas as tentativas por cada músculo. A análise estatística foi feita com os testes ANOVA para medidas repetidas e post-hoc de Bonferroni. RESULTADOS: A atividade EMG dos músculos TrS, TrI e DM foi significativamente maior nos exercícios com haste oscilatória do que com haste não-oscilatória (todos p<0,001). Não foram significativas as diferenças na ativação desses músculos entre os exercícios. CONCLUSÃO: Os resultados do presente estudo indicaram que a haste oscilatória requisitou maior atividade EMG dos músculos do ombro e, assim, pode ser um instrumento útil no treinamento desses músculos.