The influence of perhydroazepine and piperidine as further ancillary ligands on Ru-PPh(3)-based catalysts for ROMP of norbornene and norbornadiene

Polynorbornadiene and polynorbornene were synthesized via ring opening metathesis polymerization (ROMP) with [RuCl(2)(PPh(3))(2)(amine)] as catalyst precursors, amine = piperidine (1) or perhydroazepine (2) in the presence of 5 mu L of ethyl diazoacetate (EDA) ([monomer]/[Ru] = 5000; 40 degrees C with 1; 25 degrees C with 2). The effects of the solvent volume (2-8 mL of CHCl(3)) reaction time (5-120 min) and atmosphere type (argon and air) on the yields were investigated to observe the behavior of the two different precursors. Quantitative yields were obtained for 60 or 120 min regardless of the starting volumes, either in argon or air, with both Ru species. However, low yields were obtained for short times (5-30 min) when the reactions are performed with large volumes (6-8 mL). In argon, the yields were larger with 2, associated to a faster propagation reaction controlled by the Ru active species. In air, the yields were larger with 1, associated to a higher resistance to O(2) of the starting and propagating Ru species. The different activities between 1 and 2 are discussed considering the steric hindrance and electronic characteristics of the amines such as ancillary ligands and their arrangements with PPh(3) and Cl(-) ions in the metal centers. (c) 2009 Elsevier B.V. All rights reserved.

Ability of Ru complexes for ROMP tuned through a combination of phosphines and amines

Polynorbonerne with high molecular weight was obtained via ring opening metathesis polymerization using catalysts derived from [RuCl(2)(PPh(2)Bz)(2) L] (1 for L = PPh(2) Bz; 2 for L = piperidine) type of complexes when in the presence of ethyl diazoacetate in CHCl(3). The polymer precipitated within a few minutes at 50 degrees C when using 1 with ca. 50% yield ([NBE]/[Ru] = 5000). Regarding 2, for either 30 min at 25 C or 5 min at 50 degrees C, more than 90% of yields are obtained; and at 50 C for 30 min a quantitative yield is obtained. The yield and PDI values are sensitive to the [NBE]/[Ru] ratio. The reaction of 1 with either isonicotinamide or nicotinamide produces six-coordinated complexes of [RuCl(2)(PPh(2)Bz)(2)(L)(2)] type, which are almost inactive and produce only small amounts of polymers at 50 C for 30 min. Thus, we Concluded that the novel complexes show very distinct reactivities for ROMP of NBE. This has been rationalized on account of a combination of synergistic effects of the phosphine-amine ancillary ligands. (C) 2009 Elsevier B.V. All rights reserved.

New bacterial cellulose nanocomposites prepared by in situ radical polymerization of methacrylate monomers

Bacterial cellulose/polymethacrylate nanocomposites have received attention in numerous areas of study and in a variety of applications. The attractive properties of methacrylate polymers and bacterial cellulose, BC, allow the synthesis of new nanocomposites with distinct characteristics. In this study, BC/poly(glycidylmethacrylate) (BC/PGMA) and BC/poly(ethyleneglycol)methacrylate (BC/PPEGMA) nanocomposites were prepared through in situ free radical polymerization of GMA and PEGMA, respectively. Ammonium persulphate (APS) was used as an initiator and N,N’methylenebisacrilamide (MBA) was used as a crosslinker in BC/PGMA. Chemical composition, morphology, thermal stability, water absorption, mechanic and surface properties were determined through specific characterization techniques. The optimal polymerization was obtained at (1:2) for BC/PGMA, (1:2:0.2) ratio for BC/GMA/MBA and (1:20) for BC/PPEGMA, with 0.5% of initiator at 60 ºC during 6 h. A maximum of 67% and 87% of incorporation percentage was obtained, respectively, for the nanocomposites BC/PGMA/MBA and BC/PPEGMA. BC/PGMA nanocomposites exhibited an increase of roughness and compactation of the three-dimensional structure, an improvement in the thermal and mechanical properties, and a decrease in their swelling ability and crystallinity. On the other hand, BC/PPEGMA showed a decrease of stiffness of three-dimensional structure, improvement in thermal and mechanical properties, an increase in their swelling ability and a decrease the crystallinity. Both BC/polymethacrylate nanocomposites exhibited a basic surface character. The acid treatment showed to be a suitable strategy to modifiy BC/PGMA nanocomposites through epoxide ring-opening reaction mechanism. Nanocomposites became more compact, smooth and with more water retention ability. A decrease in the thermal and mechanical proprieties was observed. The new nanocomposites acquired properties useful to biomedical applications or/and removal of heavy metals due to the presence of functional groups.

Theoretical insight into the mechanism for the inhibition of the cysteine protease cathepsin B by 1,2,4-thiadiazole derivatives

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estudo de estirilpironas de Cryptocarya mandioccana por espectrometria de massas e análise configuracional por ressonância magnética nuclear e dicroísmo circular

Pós-graduação em Química - IQ

Structural characterization of an etheno-2 '-deoxyguanosine adduct modified by tetrahydrofuran

The reaction of 2'-deoxyguanosine with the alpha,beta-unsaturated aldehydes trans-2-octenal, trans-2-nonenal, trans-2-decenal, trans,trans-2,4-nonadienal, and trans,trans-2,4-decadienal in THF gives rise to three novel adducts: 3-(2'-deoxy-beta-D-erythro-pentafuranosyl)-7-[3-hydroxy-1-(3(2'-deoxy-beta-D-erythro-pentafuranosyl)-3,5-dihydro-imidazo[1,2-alpha]purin-9-one-7-yl)-propyl] -3,5-dihydro-imidazo[1,2-alpha]purin-9-one (M) and 3-(2'-deoxy-beta-D-erythro-pentafuranosyl)-7-(tetrahydrofuran-2-yl)-3,5-dihydro-imidazo[1,2-alpha]purin-9-one (A8 and A9), which are not observed in the absence of THF. These adducts were isolated from in vitro reactions by reversed-phase HPLC and fully characterized on the basis of spectroscopic measurements. Adduct A7 consists of two 1,N-2-etheno-2'-deoxyguanosine (1,N-2-epsilondGuo) residues linked to a hydroxy-carbon side chain; adducts A8 and A9 are interconvertible 1,N-2-epsilondGuo derivatives bearing a THF moiety. The proposed reaction mechanism involves the electrophilic attack on 1,N-2-epsilondGuo by the carbonyl of 4-hydroxy-butanal, generated via ring opening of alpha-hydroxy-THF (THF-OH), yielding adducts A8 and A9. A further combination of these adducts with another 1,N-2-epsilondGuo produces the double adduct A7. These findings demonstrate that reactions of unsaturated aldehydes in the presence of THF produce novel condensation 1,N-2-epsilondGuo-THF adducts. Further studies would indicate the relevance of these adducts in THF toxicity.

Dimetilsulfóxidos como ligantes ancilares em complexos de rutênio: catalisadores duais para a combinação da ROMP de norborneno e ATRP de metacrilato de metila

Pós-graduação em Química - IBILCE

ROMP como um método versátil para a obtenção de materiais poliméricos diferenciados

Ring Opening Metathesis Polymerization (ROMP) of cyclic olefins is a powerful transition metal-catalyzed reaction for syntheses of polymers and copolymers. The key feature of this reaction is the [2+2]-cycloaddition mechanism, with retention of the olefinic unsaturation in the polymer chain and occurrence of living polymerization. With the development of metal-carbene type catalysts for this process, many addressed polymeric materials have been successfully prepared to be employed in several fields of the science and technology. This review summarizes recent examples of syntheses of polymers with amphiphilic features such as block, graft, brush or star copolymers; as well syntheses of biomaterials, dendronized architectures, photoactive polymers, cross-linked or self-healing materials, and polymers from renewed supplies.

Sintesi e coordinazione di leganti Ciclopentadienilici O-Multifunzionalizzati

The introduction of hydroxyl groups into ligands is able to transfer high hydrophilic features to the related metal systems. The atom-economy synthetic procedure adopted which consists in the one-step Cyclopentene-oxide ring opening, quantitatitatively affords stereoselective formation of the multi-hydroxyl rac-1,2,4- C5H2[CH(CH2)3CHOH]3 Cpººº ligand1. Rh complexation of Cpººº gives rise to a novel class of water-soluble complexes (L,L)RhCpººº (LL=NBD 1, COD 2, CH2CH2 3, CO 4) (Scheme 1) characterized by their spectroscopic features (ESI-MS, IR, 2D NMR, n.O.e.). The X-ray diffraction studies of 1a reveal the occurrence of one couple of enantiomeric pairs in the crystal structure, whilst the crystal packing shows an interesting self-organization in chains of dimeric units of 1a, promoted by strong intermolecular hydroxyl H-bonding. This effect has been exploited by performing VT NMR experiments in different solvents (CDCl3, Py, DMSO). Unpredictably, in the absence of chiral tag, 1 exhibits solvent-dependent chiroptical properties (CD, αD^ 25), which are correlated to UV transitions and DFT calculations. The intra/inter molecular H-binding is crucial in driving the equilibrium between the observed atropisomers 1a and 1b, by varying the planar chirality on the two π-complexes.

Messa a punto di procedure per la semi-sintesi di composti ad attività antitumorale partendo da prodotti naturali. Studi di struttura-attività

Camptothecin, (CPT) is a pentacyclic alkaloid isolated for the first time from the Chinese tree Camptotheca acuminata, and which has soon attracted the attention of medicinal chemists and pharmacologists due to its promising anti-cancer activity against the most aggressive histo-types. So far, most of the synthesized camptothecin analogues are A and B ring modified compounds, which have been prepared via synthetic or semi-synthetic routes. To the best of our knowledge, a very limited number of C, D, or E ring modified analogues of CPT have been reported; moreover, the few derivatives known from the literature showed a reduced or no biological activity. This dissertation presents synthetic studies on camptothecin new derivatives along with the development of a new and general semi-synthetic methodology to obtain a large variety of analogues. We report here the semi-synthesis of a new family of 5-substituted CPT's, along with their biological activity evaluation, which will be compared with reference compounds. The use of carrier-linked prodrugs has emerged as a useful strategy to overcome some of the drawbacks related with the use of the parent drug, such as low solubility, membrane permeability properties, low oral absorption, instability, toxicity, and nontargeting. Herein we report CPT-prodrugs synthesized via ring opening of the lactone moiety as 17-O-acyl camptothecin tripartate conjugates, which bear a polyamine side chain with different architectures, as the carriers. Moreover, we found that the replacement of the oxygen atom with sulphur on the piridone D-ring, dramatically improves the potency of the novel 16a-thio-camptothecin derivatives, opening new possibilities in the modelling of this class of compounds.

Asymmetric synthesis of benzylic and heterobenzylic amines

C2-Symmetrical, enantiopure 2,6-di[1-(1-aziridinyl)alkyl]pyridines (DIAZAPs) were prepared by a high-yielding, three-step sequence starting from 2,6-pyridinedicarbaldehyde and (S)-valinol or (S)-phenylglycinol. The new compounds were tested as ligands in palladium-catalyzed allylation of carbanions in different solvents. Almost quantitative yield and up to 99% enantiomeric excess were obtained in the reactions of the enolates derived from malonate, phenyl- and benzylmalonate dimethyl esters with 1,3-diphenyl-2-propenyl ethyl carbonate. Asymmetric synthesis of 2-(2-pyridyl)aziridines from chiral 2-pyridineimines bearing a stereogenic center at the nitrogen atom was development. The envisioned route involves the addition of chloromethyllithium to the imine derived from 2-pyridinealdehyde and (S)-valinol, protected as O-trimethylsilyl ether. The analogous reaction performed on the imine derived from (S)-valine methyl ester gave the product containing the aziridine ring as well as the α-chloro ketone group coming from the attack of chloromethyllithium to the ester function. Other stereogenic alkyl substituents at nitrogen gave less satisfactory results. Moreover, the aziridination protocol did not work on other aromatic imines, e.g. 3-pyridineimine and benzaldimine, which are not capable of bidentate chelation. The N-substituent could not be removed, but aziridine underwent ring-opening by attack of nitrogen, sulfur, and oxygen nucleophiles. Complete or prevalent regioselectivity was obtained using cerium trichloride heptahydrate as a catalyst. In some cases, the N-substituent could be removed by an oxidative protocol. The addition of organometallic (lithium, magnesium, zinc) reagents to 2-pyrroleimines derived from (S)-valinol and (S)-phenylglycinol gave the N-substituted-1-(2-pyrrolyl)alkylamines with high yields and diastereoselectivities. The (S,S)-diastereomers were useful intermediates for the preparation of enantiopure 1-[1-(2-pyrrolyl)alkyl]aziridines by routine cyclization of the β-aminoalcohol moiety and of (S)-N-benzoyl 1-[1-(2-pyrrolyl)alkyl]amines and their N-substituted derivatives by oxidative cleavage of the chiral auxiliary. 1-Allyl-2-pyrroleimines obtained from (S)-phenylglycinol and (S)-valinol underwent highly diastereoselective addition of allylmetal reagents, used in excess amounts, to give the corresponding secondary amines with concomitant allyl to 1-propenyl isomerisation of the 1-pyrrole substituent. Protection of the 2-aminoalcohol moiety as oxazolidinone, amide or Boc derivate followed by ring closing metathesis of the alkene groups gave the unsaturated bicyclic compound, whose hydrogenation afforded the indolizidine derivative as a mixture of separable diastereomers. The absolute configuration of the main diastereomer was assessed by X-ray crystallographic analysis.

Progettazione e sintesi di nuovi derivati azetidinonici biologicamente attivi

In this PhD-thesis new synthetic approaches towards new azetidinone derivatives are described. In particular, 4-alkyliden-β-lactams were used as starting materials for the preparation of new biologically active compounds. The carbapenem Thienamycin has got a broad spectrum of activity as antibiotic. It has got 3 stereocenters and apart of one epimer, all isomers have been synthesized. Using the 4-alkyliden-β-lactam benzilyc ester as precursor, we developed a synthesis for this missing epimer, which is described in chapter II. Biological tests in order to establish its biological activity are under way. The Hunsdiecker-Borodine reaction was extensively studied for the preparation of the mono halogenated and – surprisingly – the dihalogenated derivative from the 4-alkyliden-azetidinone carboxylic acid. The herein described synthetic procedures allowed the preparation of chloro-, bromo- and iodo derivatives in good to excellent yield. Furthermore, the reaction mechanism was investigated by NMR-experiments and is described in detail in chapter III. In chapter IV, synthetic approaches towards new β-lactam derivatives for inhibition of the histone deacetylase enzymes (HDACs) are reported. In collaboration with the company Sigma-Tau (Rome), 14 new β-lactams were synthesized. The new β-lactams were evaluated for the activity showing a promising activityparticulary, 10 of the β-lactams synthesized were evaluated for the in vitro inhibitory activity against the 11 human HDACs isoforms and they showed a selective inhibition of HDAC6 or HDAC8 in micromolar range. Finally, preliminary studies were conducted for the employment of 4-alkyliden-β-lactams as precursors for the synthesis of chiral β-amino acids by an opening of the β-lactam ring. In chapter V is described the ring opening reaction catalyzed by the enzyme lipase Cal-B. Preliminary results have shown that the enzyme not only catalyzes the ring opening of the β-lactam precursor, moreover, it leads to the formation of a cyclic dimer by the reaction of two molecules of β-amino acid obtained.

Polymergebundene Nitrone

In den letzten Jahren ist die Nachfrage nach Datenspeichern und ihrer Speicherkapazität immer größer geworden. Dazu sind neue Speichermaterialien notwendig sind, wofür sich in vielen Fällen polymere schaltbare Materialien eignen.Aus diesem Grunde wurden in der vorliegenden Arbeit polymergebundene Nitrone hergestellt, um diese als photoreaktives Material zu untersuchen. Die direkte freie radikalische Polymerisation war nicht möglich. Um zu den polymergebundenen Nitronen zu gelangen, mussten zuerst die Doppelbindungen enthaltenden Aldehyde polymerisiert und dann polymeranalog, meist quantitativ mit den N?Alkylhydroxylaminen zum Nitron kondensiert werden. Des weiteren wurden nitronhaltige Polymere auf direktem Weg durch enzymatisch-oxidative Polymerisation von nitronhaltigen Phenolen erhalten.Auch wurden Aldehydmonomere mit dem sperrigen dimethylierten b-Cyclodextrin als 'Schutzgruppe' komplexiert und im wässrigen Medium radikalisch polymerisiert, was zu höheren Molgewichten führte. Hierbei trat auch ein interessanter Verzögerungseffekt bei der Polymerisation von 4-Vinylbenzaldehyd auf, was sich in längeren Polymerisationszeiten und geringeren Polymerisationsausbeuten bemerkbar machte.Die UV-Bestrahlung der Nitronfunktion führt zum entsprechenden dreigliedrigen Oxaziridinring, der eine geringere Polarität als das Nitron besitzt. Die Wellenleitermodenspektroskopie der nitronhaltigen Polymerfilme zeigte, dass die Schichtdicke weitgehend konstant bleibt, während die Brechungsindices stark abnehmen. Eine thermische Ringöffnung der polymergebundenen Oxaziridine zu den entsprechenden Nitronen scheint bei dieser Art von Polymeren nicht möglich zu sein.

Aluminium- und Yttrium-Initiatoren für die koordinative Ringöffnungspolymerisation von Propylenoxid

Zielsetzung ist der synthetische Zugang zu metallorganischen Verbindungen, die Propylenoxid koordinativ polymerisieren und deren Aktivität sich durch gezielte Variation der sterischen oder elektronischen Eigenschaften kontrollieren läßt. Zur Bearbeitung dieser Aufgabe werden zwei verschiedene Klassen von Komplexen synthetisiert und charakterisiert: Vorwiegend durch Salzmetathese werden mehrere Yttriumamide der allgemeinen Formel Y(NRR´)3(THF)x erhalten. Dabei erfolgt eine Diskussion der Auswirkungen sterischer und elektronischer Variation der beiden Amido-Substituenten R und R´, die sich in der Bildung von „at“-Komplexen, Lösungsmitteladdukten und größeren Aggregaten äußern. Durch Alkaneliminierung wird eine umfassende Reihe von Aluminiumkomplexen methylen- und thioverbrückter Bisphenolatoliganden dargestellt. Die Verbindungen besitzen unter Ausschluß zusätzlicher Basen dimere oder mehrkernige Strukturen, deren Diskussion schwerpunktsmäßig anhand ihres Verhaltens in Lösung erfolgt. Die Aluminiumkomplexe werden in anschließenden Reaktionen zu Lösungsmitteladdukten und Aluminaten umgesetzt.Die Yttriumamide initiieren die Ringöffnungspolymerisation von Propylenoxid bei Temperaturen von 60 oder 80 °C. Die Polymerisation erfolgt nach einem koordinativen Mechanismus, eine zu niedrige Katalysatoreffizienz schließt jedoch die Yttriumamide als Vorläufer zu definierten „single site“-Katalysatoren aus. Mit der Kombination aus neutralen Aluminiumkomplexen mit den entsprechenden Aluminaten verläuft die Ringöffnungspolymerisation von Propylenoxid bei Raumtemperatur schnell und kontrolliert. Es läßt sich ein prinzipiell neuer Mechanismus belegen, bei dem die Polymerisation unter synergistischer Wirkung eines Aluminiumphenolato-Komplexes mit dem korrespondierenden „at“-Komplex erfolgt.

Dendritische Copolymere auf der Basis von Milchsäure

In der vorliegenden Arbeit wurden verzweigte Copolymerstrukturen auf der Basis von Milchsäure synthetisiert. Über die Kombination der AB-Ringöffnungspolymerisation (ROP) des Dilactids mit der AB2-Polykondensation symmetrischer Bishydroxy-Carbonsäuren waren langketten- und hyperverzweigte Polylactidcopolyester zugänglich, wobei der Verzweigungsgrad über das Verhältnis der Monomere gezielt variiert werden konnte. Weiterhin wurde ausgehend von hyperverzweigtem Polyglycerin in einer „core-first“ Strategie erstmals PLA-Multiarmsterne aufgebaut. Es zeigte sich, daß die Hydrophobisierung der hydrophilen Polyglycerinstruktur durch Anbindung der Lactidarme zur Ausbildung amphiphiler Kern-Schale-Strukturen führt.