Species identification and authentication of some of the most important seafood products in Iranian markets using biotechnological methods based on DNA

This study describes the molecular identification of sixteen fish species present in processed products imported into Iran for human consumption. DNA barcoding using direct sequencing of about 650 bp of the mitochondrial Cytochrome Oxidase subunit I gene revealed incorrect labeling (31.25%). Substitution of fish species constitutes serious economic fraud, and our results increase concern regarding the trading of processed fish products in Iran from both health and conservation points of view.

Evaluation of ferricyanide effects on microorganisms with multi-methods

In this study, we report the effects of ferricyanide on organisms based on the changes in physiological state and morphology of Escherichia coli (E coli) DH 5 alpha after being pretreated by ferricyanide. The impact on bacterial cell growth and viable rate of exposure to different concentrations of ferricyanide was determined, and the morphology change of E. coli was studied by atomic force microscopy (AFM). Finally, recovery test was used to evaluate the recovery ability of injured cells. The results showed that the effects on growth and morphology of E. coli were negligible when the concentration of ferricyanide was below 25.0 mM. While the results showed 50.8% inhibition of growth in the presence of 50.0 mM ferricyanide for 3 h, 89.6% viability was detected by flow cytometry (FCM) assay. AFM images proved that compact patches appeared on the bacterial surface and protected the bacterial viability. Furthermore, the results revealed that deterioration of bacterial surface closely related to the incubation time from 0.5 to 3 h at 100.0 mM ferricyanide. In the recovery test, microbial cell population and dissolved oxygen individually decreased 36.7% and 28.3% with 25.0 mM ferricyanide.

Influence of annealing on structure of poly(aryl ether ether ketone ketone) revealed by SAXS

Structural studies of poly(aryl ether ether ketone ketone) (PEEKK) using small-angle X-ray scattering and one-dimensional electron density correlation function methods revealed that its aggregated state structure was significantly influenced by the annealing temperature. The long period L, the average thickness of the lamellae d, the electron density difference between the crystalline and amorphous regions eta(c) - eta(a), and the invariant Q increased with increasing annealing temperature, but it was opposite to the case of the specific inner surfaces O-s. A transition zone existed between the traditional "two phases" with a dimension about 0.5 nm for semicrystalline PEEKK. (C) 1998 John Wiley & Sons, Inc. J Appl Polym Sci 69: 1829-1835, 1998.

Finding optimal alternatives based on efficient comparative preference inference

Choosing the right or the best option is often a demanding and challenging task for the user (e.g., a customer in an online retailer) when there are many available alternatives. In fact, the user rarely knows which offering will provide the highest value. To reduce the complexity of the choice process, automated recommender systems generate personalized recommendations. These recommendations take into account the preferences collected from the user in an explicit (e.g., letting users express their opinion about items) or implicit (e.g., studying some behavioral features) way. Such systems are widespread; research indicates that they increase the customers' satisfaction and lead to higher sales. Preference handling is one of the core issues in the design of every recommender system. This kind of system often aims at guiding users in a personalized way to interesting or useful options in a large space of possible options. Therefore, it is important for them to catch and model the user's preferences as accurately as possible. In this thesis, we develop a comparative preference-based user model to represent the user's preferences in conversational recommender systems. This type of user model allows the recommender system to capture several preference nuances from the user's feedback. We show that, when applied to conversational recommender systems, the comparative preference-based model is able to guide the user towards the best option while the system is interacting with her. We empirically test and validate the suitability and the practical computational aspects of the comparative preference-based user model and the related preference relations by comparing them to a sum of weights-based user model and the related preference relations. Product configuration, scheduling a meeting and the construction of autonomous agents are among several artificial intelligence tasks that involve a process of constrained optimization, that is, optimization of behavior or options subject to given constraints with regards to a set of preferences. When solving a constrained optimization problem, pruning techniques, such as the branch and bound technique, point at directing the search towards the best assignments, thus allowing the bounding functions to prune more branches in the search tree. Several constrained optimization problems may exhibit dominance relations. These dominance relations can be particularly useful in constrained optimization problems as they can instigate new ways (rules) of pruning non optimal solutions. Such pruning methods can achieve dramatic reductions in the search space while looking for optimal solutions. A number of constrained optimization problems can model the user's preferences using the comparative preferences. In this thesis, we develop a set of pruning rules used in the branch and bound technique to efficiently solve this kind of optimization problem. More specifically, we show how to generate newly defined pruning rules from a dominance algorithm that refers to a set of comparative preferences. These rules include pruning approaches (and combinations of them) which can drastically prune the search space. They mainly reduce the number of (expensive) pairwise comparisons performed during the search while guiding constrained optimization algorithms to find optimal solutions. Our experimental results show that the pruning rules that we have developed and their different combinations have varying impact on the performance of the branch and bound technique.

Symptom burden in individuals with inflammatory bowel disease: a mixed methods study

To investigate the symptom burden experiences of individuals with inflammatory bowel disease (IBD). An explanatory sequential mixed methods study was conducted. A cross-sectional, correlational survey was first undertaken. Symptom burden was measured using a modified disease specific version of the Memorial Symptom Assessment Scale, which was administered to a consecutive sample of individuals with IBD (n = 247) at an IBD Outpatients department in one urban teaching hospital in Ireland. Disease activity was determined using clinical disease activity indices, which were completed by the consulting physician. A sequential qualitative, descriptive study was then conducted aimed at explaining noteworthy quantitative findings. A criterion-related purposeful sample of seven participants from the quantitative study was recruited. Semi-structured face to face interviews were conducted using an interview guide and data were analysed using content analysis. Findings revealed that participants experienced a median of 10 symptoms during the last week, however as many as 16 symptoms were experienced during active disease. The most burdensome symptoms were lack of energy, bowel urgency, diarrhoea, feeling bloated, flatulence and worry. Total symptom burden was found to be low with a mean score of 0.56 identified out of a possible range from 0 to 4. Participants with active disease (M = 0.81, SD = 0.48; n = 68) had almost double mean total symptom burden scores than participants with inactive disease (M = 0.46, SD = 0.43; n = 166) (p < 0.001). Mean total psychological symptom burden was found to be significantly greater than mean total physical symptom burden (rho = 0.73, n = 247, p < 0.001). Self-reported disease control, gender, number of flare ups in the last two years, and smoking status was found to be significant predictors of total symptom burden, with self-reported disease control identified as the strongest predictor. Qualitative data revealed tiredness, pain, bowel symptoms, worry and fear as being burdensome. Furthermore, symptom burden experiences were described in terms of its impact on restricting aspects of daily activities, which accumulated into restrictions on general life events. Psychological symptom burden was revealed as more problematic than physical symptom burden due to its constant nature, with physical and psychological symptoms described to occur in a cyclical manner. Participants revealed that disease control was evaluated not only in terms of symptoms, but also in terms of their abilities to control the impact of symptoms on their lives. This study highlights the considerable number of symptoms and the most burdensome symptoms experienced by individuals with IBD, both during active and inactive disease. This study has important implications on symptom assessment in terms of the need to encompass both physical and psychological symptoms. In addition, greater attention needs to be placed on psychological aspects of IBD care.

The development of new methods for high resolution radio astronomy imaging

Very Long Baseline Interferometry (VLBI) polarisation observations of the relativistic jets from Active Galactic Nuclei (AGN) allow the magnetic field environment around the jet to be probed. In particular, multi-wavelength observations of AGN jets allow the creation of Faraday rotation measure maps which can be used to gain an insight into the magnetic field component of the jet along the line of sight. Recent polarisation and Faraday rotation measure maps of many AGN show possible evidence for the presence of helical magnetic fields. The detection of such evidence is highly dependent both on the resolution of the images and the quality of the error analysis and statistics used in the detection. This thesis focuses on the development of new methods for high resolution radio astronomy imaging in both of these areas. An implementation of the Maximum Entropy Method (MEM) suitable for multi-wavelength VLBI polarisation observations is presented and the advantage in resolution it possesses over the CLEAN algorithm is discussed and demonstrated using Monte Carlo simulations. This new polarisation MEM code has been applied to multi-wavelength imaging of the Active Galactic Nuclei 0716+714, Mrk 501 and 1633+382, in each case providing improved polarisation imaging compared to the case of deconvolution using the standard CLEAN algorithm. The first MEM-based fractional polarisation and Faraday-rotation VLBI images are presented, using these sources as examples. Recent detections of gradients in Faraday rotation measure are presented, including an observation of a reversal in the direction of a gradient further along a jet. Simulated observations confirming the observability of such a phenomenon are conducted, and possible explanations for a reversal in the direction of the Faraday rotation measure gradient are discussed. These results were originally published in Mahmud et al. (2013). Finally, a new error model for the CLEAN algorithm is developed which takes into account correlation between neighbouring pixels. Comparison of error maps calculated using this new model and Monte Carlo maps show striking similarities when the sources considered are well resolved, indicating that the method is correctly reproducing at least some component of the overall uncertainty in the images. The calculation of many useful quantities using this model is demonstrated and the advantages it poses over traditional single pixel calculations is illustrated. The limitations of the model as revealed by Monte Carlo simulations are also discussed; unfortunately, the error model does not work well when applied to compact regions of emission.

US NOAA Fisheries and UK SAHFOS CPR surveys: comparison of methods and data

The US National Oceanic and Atmospheric Administration (NOAA) Fisheries Continuous Plankton Recorder (CPR) Survey has sampled four routes: Boston–Nova Scotia (1961–present), New York toward Bermuda (1976–present), Narragansett Bay–Mount Hope Bay–Rhode Island Sound (1998–present) and eastward of Chesapeake Bay (1974–1980). NOAA involvement began in 1974 when it assumed responsibility for the existing Boston–Nova Scotia route from what is now the UK's Sir Alister Hardy Foundation for Ocean Science (SAHFOS). Training, equipment and computer software were provided by SAHFOS to ensure continuity for this and standard protocols for any new routes. Data for the first 14 years of this route were provided to NOAA by SAHFOS. Comparison of collection methods; sample processing; and sample identification, staging and counting techniques revealed near-consistency between NOAA and SAHFOS. One departure involved phytoplankton counting standards. This has since been addressed and the data corrected. Within- and between-survey taxonomic and life-stage names and their consistency through time were, and continue to be, an issue. For this, a cross-reference table has been generated that contains the SAHFOS taxonomic code, NOAA taxonomic code, NOAA life-stage code, National Oceanographic Data Center (NODC) taxonomic code, Integrated Taxonomic Information System (ITIS) serial number and authority and consistent use/route. This table is available for review/use by other CPR surveys. Details of the NOAA and SAHFOS comparison and analytical techniques unique to NOAA are presented.

A new lead for nonpeptidic active-site-directed inhibitors of the severe acute respiratory syndrome coronavirus main protease discovered by a combination of screening and docking methods.

The coronavirus main protease, Mpro, is considered to be a major target for drugs suitable for combating coronavirus infections including severe acute respiratory syndrome (SARS). An HPLC-based screening of electrophilic compounds that was performed to identify potential Mpro inhibitors revealed etacrynic acid tert-butylamide (6a) as an effective nonpeptidic inhibitor. Docking studies suggested a binding mode in which the phenyl ring acts as a spacer bridging the inhibitor's activated double bond and its hydrophobic tert-butyl moiety. The latter is supposed to fit into the S4 pocket of the target protease. Furthermore, these studies revealed etacrynic acid amide (6b) as a promising lead for nonpeptidic active-site-directed Mpro inhibitors. In a fluorimetric enzyme assay using a novel fluorescence resonance energy transfer (FRET) pair labeled substrate, compound 6b showed a Ki value of 35.3 M. Since the novel lead compound does not target the S1', S1, and S2 subsites of the enzyme's substrate-binding pockets, there is room for improvement that underlines the lead character of compound 6b.

Comparison of genetic and morphological methods to detect the presence of American lobsters, Homarus americanus H. Milne Edwards, 1837 (Astacidea: Nephropidae) in Norwegian waters

American lobsters (Homarus americanus H. Milne Edwards, 1837) are imported live to Europe and should according regulations be kept in land-based tanks until sold. In spite of the strict regulations aimed specifically at preventing the introduction of this species into the NE Atlantic, several specimens of H. americanus have been captured in the wild, especially in Oslofjord, Norway since 1999. One of the great concerns is interbreeding between the introduced American species and the local European lobster, H. gammarus (Linnaeus, 1758). For this reason an awareness campaign was launched in 2000 focusing on morphologically "unusual" lobsters caught in local waters. Morphological characters have been based on colour and sub-ventral spines on the rostrum. Two samples of H. americanus were used for comparisons, as well as samples of European lobster from Oslofjord collected in 1992. Previous genetic analyses (allozymes, mtDNA and microsatellite DNA) have demonstrated that the American lobster is distinct from its European counterpart, with several additional alleles at many loci in addition to different allelic frequency distribution of alleles of "shared" alleles. During the present study, thirteen microsatellite loci were tested in the initial screening, and the three most discriminating loci (Hgam98, Hgam197b and Hgam47b) were used in a detailed comparison between the two species. A total of 45 unusual lobsters were reported captured from Ålesund (west) to Oslofjord (southeast) from 2001 to 2005 and these were analysed for the three microsatellite loci. Nine specimens were identified as American lobsters. Comparisons between morphological and genetic characteristics revealed that morphological differences are not reliable in discrimination the two species, or to identify hybrids. Further, some loci display almost no overlapping in allele frequency distribution for the reference samples analysed, thus providing a reliable tool to identify hybrids.

Inhibitor profiling of the Pseudomonas aeruginosa virulence factor LasB using N-alpha mercaptoamide template-based inhibitors

We report on the synthesis and biological evaluation of a focussed library of N-alpha mercaptoamide containing dipeptides as inhibitors of the zinc metallopeptidase Pseudomonas aeruginosa elastase (LasB, EC 3.4.24.26). The aim of the study was to derive an inhibitor profile for LasB with regard to mapping the S´1 binding site of the enzyme. Consequently, a focussed library of 160 members has been synthesised, using standard Fmoc-solid phase methods (on a Rink-amide resin), in which a subset of amino acids including examples of those with basic (Lys, Arg), aromatic (Phe, Trp), large aliphatic (Val, Leu) and acidic (Asp, Glu) side-chains populated the P´2 position of the inhibitor sequence and all 20 natural amino acids were incorporated, in turn, at the P´1 position. The study has revealed a preference for aromatic and/or large aliphatic amino acids at P´1 and a distinct bias against acidic residues at P´2. Ten inhibitor sequences were discovered that exhibited sub to low micromolar Ki values.

Learning design contingent valuation (LDCV): NOAA guidelines, preference learning and coherent arbitrariness

We extend the contingent valuation (CV) method to test three differing conceptions of individuals' preferences as either (i) a-priori well-formed or readily divined and revealed through a single dichotomous choice question (as per the NOAA CV guidelines [K. Arrow, R. Solow, P.R. Portney, E.E. Learner, R. Radner, H. Schuman, Report of the NOAA panel on contingent valuation, Fed. Reg. 58 (1993) 4601-4614]); (ii) learned or 'discovered' through a process of repetition and experience [J.A. List, Does market experience eliminate market anomalies? Q. J. Econ. (2003) 41-72; C.R. Plott, Rational individual behaviour in markets and social choice processes: the discovered preference hypothesis, in: K. Arrow, E. Colombatto, M. Perleman, C. Schmidt (Eds.), Rational Foundations of Economic Behaviour, Macmillan, London, St. Martin's, New York, 1996, pp. 225-250]; (iii) internally coherent but strongly influenced by some initial arbitrary anchor [D. Ariely, G. Loewenstein, D. Prelec, 'Coherent arbitrariness': stable demand curves without stable preferences, Q. J. Econ. 118(l) (2003) 73-105]. Findings reject both the first and last of these conceptions in favour of a model in which preferences converge towards standard expectations through a process of repetition and learning. In doing so, we show that such a 'learning design CV method overturns the 'stylised facts' of bias and anchoring within the double bound dichotomous choice elicitation format. (C) 2007 Elsevier Inc. All rights reserved.

The use of process simulation methods in support of organisational learning in availability contracting

Traditional business models in the aerospace industry are based on a conventional supplier to customer relationship based on the design, manufacture and subsequent delivery of the physical product. Service provision, from the manufacturer's perspective, is typically limited to the supply of procedural documentation and the provision of spare parts to the end user as the product passes through the latter stages of its intended lifecycle. Challenging economic and political conditions have resulted in end users re-structuring their core business activities, particularly in the defence sector. This has resulted in the need for original equipment manufacturers (OEMs) to integrate and manage support service activities in partnership with the customer to deliver platform availability. This improves the probability of commercial sustainability for the OEM through shared operational risks while reducing the cost of platform ownership for the customer. The need for OEMs to evolve their design, manufacture and supply strategies by focusing on customer requirements has revealed a need for reconstruction of traditional internal behaviours and design methodologies. Application of organisational learning is now a well recognised principle for innovative companies to achieve long term growth and sustained technical development, and hence, greater market command. It focuses on the process by which the organisation's knowledge and value base changes, leading to improved problem solving ability and capacity for action. From the perspective of availability contracting, knowledge and the processes by which it is generated, used and retained, become primary assets within the learning organisation. This paper will introduce the application of digital methods to asset management by demonstrating how the process of learning can benefit from a digital approach, how product and process design can be integrated within a virtual framework and finally how the approach can be applied in a service context.

Design and evaluation of tinnitus synthesis methods: From spectral to spatial matching

Purpose
This study was designed to investigate methods to help patients suffering from unilateral tinnitus synthesizing an auditory replica of their tinnitus.

Materials and methods
Two semi-automatic methods (A and B) derived from the auditory threshold of the patient and a method (C) combining a pure tone and a narrow band-pass noise centred on an adjustable frequency were devised and rated on their likeness over two test sessions. A third test evaluated the stability over time of the synthesized tinnitus replica built with method C, and its proneness to merge with the patient's tinnitus. Patients were then asked to try and control the lateralisation of this single percept through the adjustment of the tinnitus replica level.

Results
The first two tests showed that seven out of ten patients chose the tinnitus replica built with method C as their preferred one. The third test, performed on twelve patients, revealed pitch tuning was rather stable over a week interval. It showed that eight patients were able to consistently match the central frequency of the synthesized tinnitus (presented to the contralateral ear) to their own tinnitus, which leaded to a unique tinnitus percept. The lateralisation displacement was consistent across patients and revealed an average range of 29dB to obtain a full lateral shift from the ipsilateral to the contralateral side.

Conclusions
Although spectrally simpler than the semi-automatic methods, method C could replicate patients' tinnitus, to some extent. When a unique percept between synthesized tinnitus and patients' tinnitus arose, lateralisation of this percept was achieved.

THE EFFECTS OF 3 NON-ANTIBIOTIC, ANTIMICROBIAL AGENTS ON THE SURFACE HYDROPHOBICITY OF CERTAIN MICROORGANISMS EVALUATED BY DIFFERENT METHODS

The effects of three non-antibiotic, antimicrobial agents (taurolidine, chlorhexidine acetate and providone-iodine) on the surface hydrophobicity of the clinical strains Escherichia coli, Staphylococcus saprophyticus, Staphylococcus epidermidis and Candida albicans were examined. Three recognized techniques for hydrophobicity measurements, Bacterial Adherence to Hydrocarbons (BATH), the Salt Aggregation Test (SAT) and Hydrophobic Interaction Chromatography (HIC) were compared. At concentrations reported to interfere with microbial-epithelial cell adherence, all three agents altered the cell surface hydrophobicity. However, these effects failed to exhibit a uniform relationship. Generally, taurolidine and povidone-iodine treatments decreased the hydrophobicity of the strains examined whereas chlorhexidine acetate effects depended upon the micro-organism treated. Subsequently, the exact contribution of altered cell surface hydrophobicity to the reported microbial anti-adherence effects is unclear. Comparison of the three techniques revealed a better correlation between the results obtained with the BATH test and HIC than the results obtained with the BATH and SAT or SAT and HIC. However, these differences may be due to the inaccuracy associated with the visual assessment of results employed by the SAT.

Preferences for a third-trimester ultrasound scan in a low-risk obstetric population: a discrete choice experiment

Objective: Establish maternal preferences for a third-trimester ultrasound scan in a healthy, low-risk pregnant population.

Design: Cross-sectional study incorporating a discrete choice experiment.

Setting: A large, urban maternity hospital in Northern Ireland.

Participants: One hundred and forty-six women in their second trimester of pregnancy.

Methods: A discrete choice experiment was designed to elicit preferences for four attributes of a third-trimester ultrasound scan: health-care professional conducting the scan, detection rate for abnormal foetal growth, provision of non-medical information, cost. Additional data collected included age, marital status, socio-economic status, obstetric history, pregnancy-specific stress levels, perceived health and whether pregnancy was planned. Analysis was undertaken using a mixed logit model with interaction effects.

Main outcome measures: Women's preferences for, and trade-offs between, the attributes of a hypothetical scan and indirect willingness-to-pay estimates.

Results: Women had significant positive preference for higher rate of detection, lower cost and provision of non-medical information, with no significant value placed on scan operator. Interaction effects revealed subgroups that valued the scan most: women experiencing their first pregnancy, women reporting higher levels of stress, an adverse obstetric history and older women.

Conclusions: Women were able to trade on aspects of care and place relative importance on clinical, non-clinical outcomes and processes of service delivery, thus highlighting the potential of using health utilities in the development of services from a clinical, economic and social perspective. Specifically, maternal preferences exhibited provide valuable information for designing a randomized trial of effectiveness and insight for clinical and policy decision makers to inform woman-centred care.