Characterization and catalytic activity of 2,6-dichlorophenyl substituted iron(III) porphyrin supported on silica gel and imidazole propyl gel

In this work we have made use of the study of the interaction between Fe(TDCPP)(+) and the axial ligands OH- and imidazole in order to help characterize the heterogenized catalysts Fe(TDCPP)SG and Fe(TDCPP)IPG through UV-VIS and EPR spectroscopies and thus, better understand their different catalytic activity in the oxidation of cyclohexane by PhIO. We have found out that in Fe(TDCPP)SG (containing 1.2 X 10(-6) mol Fe(TDCPP)(+)/g of support), the FeP bis-coordinates to silica gel through Fe-O coordination and it is high-spin (FeP)-P-III species. In Fe(TDCPP)IPG 1 (containing 1.1 X 10(-6) mol Fe(TDCPP)(+) and 2.2 X 10(-4) mol imidazole/g of support), the FeP is bis-ligated to imidazole propyl gel through Fe-imidazole coordination and using NO as a paramagnetic probe, we present evidence that Fe(TDCPP)(+) is present as a mixture of low-spin (FeP)-P-III and (FeP)-P-II species. This catalyst led to a relative low yield of cyclohexanol (25%) because the bis-coordination of the (FeP)-P-III to the support partially blocks the reaction between Fe(TDCPP)(+) and PhIO, thus leading to the formation of only a small amount of the active species Fe-IV(OP+, while the (FeP)-P-II species do not react with the oxygen donor. Increasing the amount of Fe(TDCPP)(+) and decreasing the amount of imidazole in the support led to the obtention of high-spin (FeP)-P-III EPR signals in the spectra of Fe(TDCPP)IPG 5 (containing 4.4 X 10(-6) mol Fe(TDCPP)(+) and 2.2 X 10(-5) mol imidazole/g of IPG), together with low-spin (FeP)-P-III species. This latter catalyst led to better cyclohexanol yields (67%) than Fe(TDCPP)IPG 1. Fe(TDCPP)IPG 5 was further used in a study of the optimization of its catalytic activity and in recycling experiments in the optimized conditions. Recycling oxidation reactions of Fe(TDCPP)IPG 5 led to a total turnover number of 201 and total cyclohexanol yield of 201%, which could not be attained with Fe(TDCPP)Cl in homogeneous solution (turnover = 96) due to the difficulty in recovering and reusing it.

Analytical method for the design of a machine with aligned and skewed permanent magnets

This work aims to present the design and the evaluation of a standard multi-pole machine with permanent magnets inserted in the rotor by two different geometrical forms: aligned and skewed magnets. The design (new analytical method) was based on a standard 250 W three phase 12-pole induction motor (squirrel cage rotor type), beginning with the original stator constructive data to calculate the magnetic flux density to determine the permanent magnets. In the development of the work, a simple and modular rotor was built reusing the original 12-pole stator (concentrated windings). The machine was evaluated in a laboratory for the purpose of checking the quantity and quality of energy produced with the machine operating as a generator and its start, torque, and performance working as a motor. In conclusion, the modular skewed magnet is an option for electrical machines, for the generation of a reasonable quality, in the context of decentralized generation and a motor with high torque and low energetic consumption.

Optimization of the immobilization of sweet potato amylase using glutaraldehyde-agarose support. Characterization of the immobilized enzyme

A simplified procedure for the preparation of immobilized beta-amylase using non-purified extract from fresh sweet potato tubers is established in this paper, using differently activated agarose supports. Beta-amylase glutaraldehyde derivative was the preparation with best features, presenting improved temperature and pH stability and activity. The possibility of reusing the amylase was also shown, when this immobilized enzyme was fully active for five cycles of use. However, immobilization decreased enzyme activity to around 15%. This seems to be mainly due to diffusion limitations of the starch inside the pores of the biocatalyst particles. A fifteen-fold increase in the Km was noticed, while the decrease of Vmax was only 30% (10.1 U mg-1 protein and 7.03 U mg-1 protein for free and immobilized preparations, respectively). © 2013 Elsevier Ltd.

Avaliação do processo de infiltração da água em solo residual de Biotita-gnaisse para superfícies com diferentes declividades utilizando lisímetros

Pós-graduação em Engenharia Civil e Ambiental - FEB

Avaliação quantitativa de riscos microbiológicos (AQRM) associados à E. coli em águas cinza

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Reciclagem química por hidrólise da poliamida 6,6 reforçada com fibra de vidro após ciclos de reciclagem mecânica

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Aproveitamento de resíduos florestais de Eucalyptus spp na indústria de fabricação de celulose para geração de energia térmica e elétrica

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Avaliação do potencial de biorremediação de solos e de águas subterrâneas contaminados com óleo diesel

Pós-graduação em Geociências e Meio Ambiente - IGCE

Pecuária bovina de corte no Estado do Pará: água, impactos ambientais e sustentabilidade ambiental

A cadeia de carne bovina no Brasil ocupa posição de destaque no contexto da economia rural brasileira, ocupando vasta área do território nacional e respondendo pela geração de emprego e renda de milhões de brasileiros. Mas com o crescimento desta atividade veio acompanhado de possíveis impactos ambientais negativos que contrapõe o equilíbrio dinâmico da sustentabilidade. Desta forma se fez necessário caracterizar esses impactos ambientais negativos relacionados aos recursos hídricos nas fases da cadeia produtiva da carne bovina: Bovinocultura e nos matadouros/frigoríficos. Na pesquisa foram enfatizados o consumo de água e a geração de rejeitos de origem bovina que causa potencial poluição dos recursos hídricos delimitado nas mesorregiões do estado do Pará. Como metodologia utilizou-se de pesquisa qualitativa e quantitativa de dados bibliográficos e estatísticos, tendo como colaboradores instituições federais e estaduais e a análise dos dados foi apresentada através de gráficos e tabelas e da estimativa de alguns indicadores de poluição. Como resultados confirma-se a grande poluição gerada aos recursos hídricos receptores de rejeitos bovinos com grande aumento da DBO (Demanda Bioquímica de Oxigênio) tanto na atividade da Bovinocultura como em matadouros/Frigoríficos, onde é gerada uma grande quantidade de matéria orgânica. Concluiu-se a grande importância do uso de medidas de produção sustentáveis como o reaproveitamento de subprodutos bovinos de matadouro e o uso de estratégias de Produção + Limpa.

Analise do aproveitamento do glicerol no mercado brasileiro

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Reuso de efluentes no processo industrial de siderurgia

Pós-graduação em Engenharia Mecânica - FEG

An innovative material based on natural rubber and leather tannery waste to be applied as antistatic flooring

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Utilização de biossurfactante e surfactante químico para dessorção de óleo presente em vermiculita hidrofobizada: estudo comparativo

A number of methods and products have been developed in order to eliminate or reduce the negative effects that hydrocarbons cause to the environment, including hydrophobic expanded vermiculite, used in oil residue filtering systems at gas stations. However, upon adsorbing organic compounds, the vermiculite is no longer used and is sent to landfills. The aim of the present study was to wash granular and powdered vermiculite containing oil lubricant in its pores with distilled water and solutions of 0.1% SDS surfactant and rhamnolipids, with the aim of removing the lubricant and the possibility of reusing the mineral. The greatest amount of lubricant removal was obtained through washing with 0.1% SDS and both granulometric forms. This may be associated to the industrial purification received by the surfactant. However, the biosurfactant is ecologically more viable due to its low toxicity and ease of degradability. In the readsorption tests, greatest adsorption was obtained with the granular vermiculite washed in SDS solution. In order to enable the reuse of the mineral, further tests are needed to enhance desorption/adsorption efficiency.

Desenvolvimento de sistemas orientado a modelos

The Software Engineering originated with the motivation to mass produce components for increased productivity in production systems. Since its origins, numerous studies have been proposed on the subject as new features in the creation of systems, like the Object- Oriented Programming and Aspect-Oriented Programming, have been established and methodologies have been developed to control them efficiently. However, years of studies in the area were not sufficient to create a methodology for reusing software artifacts really efficient and easy enough to be widespread. Given this, the Model-Driven Development (MDD) is trying to promote it using the modeling of systems as a reference, becoming part of it and establishing a huge productivity gain. One of his approaches is called Model-Driven Software Development (MDSD), which focuses on improving the practices and systems development using Domain-Specific Languages (DSL) for this purpose. In this Final Paper, Xtext is used as a tool to prove the productivity and efficiency of this approach, and for that bibliographic studies were made on the approach and the tool, and show the methodology and a case study to demonstrate results and conclusions regarding this work

Reciclagem de poliestireno expandido: compósito com fibras de algodão para a confecção de placas de circuito impresso

In this work polymeric composites reinforced with cotton fibers, from the textile industry, were developed in order to manufacture printed circuit boards. It was used expanded polystyrene (EPS) as a thermoplastic matrix by melting it. For the obtention of 10% and 15% of fiber volume fraction in cotton fibers composites, it was used wasted cotton fibers as an incentive of recycling and reusing of the domestic and industrial wastes as well as for Expanded Polystyrene(EPS). The mechanical properties of the composites were evaluated by tensile and flexural strength from standardized test methods. Composites were characterized by a Scanning Electron Microscopy (SEM), Thermogravimetry (TG/DTG), Differential Scanning Calorimetry (DSC) and dielectric analysis. The analysis of the results showed that fiber in the composite directly influenced in the thermal and mechanical properties