In vitro study of the antimicrobial activity of Brazilian propolis against Paenibacillus larvae

The honey bee disease American foulbrood (AFB) is a serious problem since its causative agent (Paenibacillus larvae) has become increasingly resistant to conventional antibiotics. The objective of this study was to investigate the in vitro activity of propolis collected from various states of Brazil against P. larvae. Propolis is derived from plant resins collected by honey bees (Apis mellifera) and is globally known for its antimicrobial properties and particularly valued in tropical regions. Tests on the activity of propolis against P. larvae were conducted both in Brazil and Minnesota, USA using two resistance assay methods that measured zones of growth inhibition due to treatment exposure. The propolis extracts from the various states of Brazil showed significant inhibition of P. larvae. Clear dose responses were found for individual propolis extracts, particularly between the concentrations of 1.7 and 0.12 mg propolis/treatment disk, but the source of the propolis, rather than the concentration, may be more influential in determining overall activity. Two of the three tested antibiotics (tylosin and terramycin) exhibited a greater level of inhibition compared to most of the Brazilian samples, which could be due to the low concentrations of active compounds present in the propolis extracts. Additionally, the majority of the Brazilian propolis samples were more effective than the few collected in MN, USA. Due to the evolution of resistance of P. larvae to conventional antibiotic treatments, this research is an important first step in identifying possible new active compounds to treat AFB in honey bee colonies. (C) 2007 Elsevier Inc. All rights reserved.

"In-vitro" corrosion behaviour of the magnesium alloy with Al and Zn (AZ31) protected with a biodegradable polycaprolactone coating loaded with hydroxyapatite and cephalexin

Mg alloys are very susceptible to corrosion in physiological media. This behaviour limits its widespread use in biomedical applications as bioresorbable implants, but it can be controlled by applying protective coatings. On one hand, coatings must delay and control the degradation process of the bare alloy and, on the other hand, they must be functional and biocompatible. In this study a biocompatible polycaprolactone (PCL) coating was functionalised with nano hydroxyapatite (HA) particles for enhanced biocompatibility and with an antibiotic, cephalexin, for anti-bacterial purposes and applied on the AZ31 alloy. The chemical composition and the surface morphology of the coated samples, before and after the corrosion tests, were studied by scanning electron microscopy (SEM) coupled with energy dispersive x-ray analysis (EDX) and Raman. The results showed that the presence of additives induced the formation of agglomerates and defects in the coating that resulted in the formation of pores during immersion in Hanks' solution. The corrosion resistance of the coated samples was studied in Hank's solution by electrochemical impedance spectroscopy (EIS). The results evidenced that all the coatings can provide corrosion protection of the bare alloy. However, in the presence of the additives, corrosion protection decreased. The wetting behaviour of the coating was evaluated by the static contact angle method and it was found that the presence of both hydroxyapatite and cephalexin increased the hydrophilic behaviour of the surface. The results showed that it is possible to tailor a composite coating that can store an antibiotic and nano hydroxyapatite particles, while allowing to control the in-vitro corrosion degradation of the bioresorbable Mg alloy AZ31. (C) 2015 Elsevier Ltd. All rights reserved.

Improvement of the quality factor of RF integrated inductors by layout optimization

A systematic method to improve the quality (Q) factor of RF integrated inductors is presented in this paper. The proposed method is based on the layout optimization to minimize the series resistance of the inductor coil, taking into account both ohmic losses, due to conduction currents, and magnetically induced losses, due to eddy currents. The technique is particularly useful when applied to inductors in which the fabrication process includes integration substrate removal. However, it is also applicable to inductors on low-loss substrates. The method optimizes the width of the metal strip for each turn of the inductor coil, leading to a variable strip-width layout. The optimization procedure has been successfully applied to the design of square spiral inductors in a silicon-based multichip-module technology, complemented with silicon micromachining postprocessing. The obtained experimental results corroborate the validity of the proposed method. A Q factor of about 17 have been obtained for a 35-nH inductor at 1.5 GHz, with Q values higher than 40 predicted for a 20-nH inductor working at 3.5 GHz. The latter is up to a 60% better than the best results for a single strip-width inductor working at the same frequency.

Evaluation of the Chemical Durability of Iowa Fly Ash Concretes, HR-327, 1993

The major objective of this research project was to investigate how Iowa fly ashes influenced the chemical durability of portland cement based materials. Chemical durability has become an area of uncertainty because of the winter application of deicer salts (rock salts) that contain a significant amount of sulfate impurities. The sulfate durability testing program consisted of monitoring portland cement-fly ash paste, mortar and concrete test specimens that had been subjected to aqueous solutions containing various concentrations of salts (both sulfate and chloride). The paste and mortar specimens were monitored for length as a function of time. The concrete test specimens were monitored for length, relative dynamic modulus and mass as a function of time. The alkali-aggregate reactivity testing program consisted of monitoring the expansion of ASTM C311 mortar bar specimens that contained three different aggregates (Pyrex glass, Oreapolis and standard Ottawa sand). The results of the sulfate durability study indicated that the paste and concrete test specimens tended to exhibit surface spalling but only very slow expansive tendencies. This suggested that the permeability of the test specimens was controlling the rate of deterioration. Concrete specimens are still being monitored because the majority of the test specimens have expanded less than 0.05%; hence, this makes it difficult to estimate the service life of the concrete test specimens or to quantify the performance of the different fly ashes that were used in the study. The results of the mortar bar studies indicated that the chemical composition of the various fly ashes did have an influence on their sulfate resistance. Typically, Clinton and Louisa fly ashes performed the best, followed by the Ottumwa, Neal 4 and then Council Bluffs fly ashes. Council Bluffs fly ash was the only fly ash that consistently reduced the sulfate resistance of the many different mortar specimens that were investigated during this study. None of the trends that were observed in the mortar bar studies have yet become evident in the concrete phase of this project. The results of the alkali-aggregate study indicated that the Oreapolis aggregate is not very sensitive to alkali attack. Two of the fly ashes, Council Bluffs and Ottumwa, tended to increase the expansion of mortar bar specimens that contained the Oreapolis aggregate. However, it was not clear if the additional expansion was due to the alkali content of the fly ash, the periclase content of the fly ash or the cristobalite content of the fly ash, since all three of these factors have been found to influence the test results.

Inborn resistance of mice to myxoviruses: macrophages express phenotype in vitro.

A strain of avian influenza A virus was adapted to grow in mouse peritoneal macrophages in vitro. The adapted strain, called M-TUR, induced a marked cytopathic effect in macrophages from susceptible mice. Mice homozygous (A2G) or heterozygous (F1 hybrids between A2G and several susceptible strains) for the gene Mx, shown previously to induce a high level of resistance towards lethal challenge by a number of myxoviruses in vivo, yielded peritoneal macrophages which were not affected by M-TUR. Peritoneal macrophages could be classified as resistant or susceptible to M-TUR without sacrificing the cell donor. Backcrosses were arranged between (A2G X A/J)F1 and A/J mice. 64 backcross animals could be tested individually both for resistance of their macrophages in vitro after challenge with M-TUR, and for resistance of the whole animal in vivo after challenge with NWS (a neurotropic variant of human influenza A virus). Macrophages from 36 backcross mice were classified as susceptible, and all of these mice died after challenge. Macrophages from 28 mice were classified as resistant, and 26 mice survived challenge. We conclude that resistance of macrophages and resistance of the whole animal are two facets of the same phenomenon.

Variability of the wheat powdery mildew pathogen Blumeria graminis f. sp. tritici in the 2003 crop season

Wheat (Triticum aestivum) powdery mildew, caused by the biotrophic fungus Blumeria graminis f. sp. tritici, is one of the most severe foliar diseases attacking this crop, reducing grain yields by 10% to 62% in Brazil. The disease can be controlled by genetic resistance of the host, but the pathogen has physiological specialization, which enables it to infect wheat cultivars that have remained resistant for years. The objective of this work was to evaluate the variability of pathogenic strains of B. graminis f. sp. tritici collected in Brazil and the effectiveness of wheat resistance genes to powdery mildew in the 2003 crop season. Plants of a differential series were inoculated with each monopustular isolate. Thirty-one combinations of effective and ineffective resistance genes were identified. Only the gene Pm4a+... remained totally effective to all isolates, and gene Pm6 was highly effective (below 10% of susceptibility), whereas genes Pm3a and Pm8 were totally ineffective (susceptible to all isolates). Genes Pm3c, D1, and D2 showed low effectiveness (above 50% of susceptibility), and genes Pm1, 2, 4a, 1+?, and 2+Mld had mean effective results to most strains (susceptibility between 10% and 49%). The virulence formula Pm1, 3c, 4a, 6, 1+?, 2+Mld, 4a+..., D2 (effective genes) / 2, 3a, 8, D1 (ineffective genes) was most frequently found, accounting for 15% of the occurrences. The most frequent number of ineffective genes was seven, ranging from three to ten.

Interruption of the blood-stage cycle of the malaria parasite, Plasmodium chabaudi, by protein tyrosine kinase inhibitors

Malaria is a devastating disease caused by a unicellular protozoan, Plasmodium, which affects 3.7 million people every year. Resistance of the parasite to classical treatments such as chloroquine requires the development of new drugs. To gain insight into the mechanisms that control Plasmodium cell cycle, we have examined the effects of kinase inhibitors on the blood-stage cycle of the rodent malaria parasite, Plasmodium chabaudi. In vitro incubation of red blood cells for 17 h at 37ºC with the inhibitors led to a decrease in the percent of infected cells, compared to control treatment, as follows: genistein (200 µM - 75%), staurosporine (1 µM - 58%), R03 (1 µM - 75%), and tyrphostins B44 (100 µM - 66%) and B46 (100 µM - 68%). All these treatments were shown to retard or prevent maturation of the intraerythrocytic parasites. The diverse concentration ranges at which these inhibitors exert their effects give a clue as to the types of signals that initiate the transitions between the different developmental stages of the parasite. The present data support our hypothesis that the maturation of the intraerythrocytic cycle of malaria parasites requires phosphorylation. In this respect, we have recently reported a high Ca2+ microenvironment surrounding the parasite within red blood cells. Several kinase activities are modulated by Ca2+. The molecular identification of the targets of these kinases could provide new strategies against malaria.

The effect of the degree of hydrolysis of the PVA and the plasticizer concentration on the color, opacity, and thermal and mechanical properties of films based on PVA and gelatin blends

The objective of this work was to study the color, opacity, crystallinity, and the thermal and mechanical properties of films based on blends of gelatin and five different types of PVA [poly(vinyl alcohol)], with and without a plasticizer. The effect of the degree of hydrolysis of the PVA and the glycerol concentration on these properties was studied using colorimetry, differential scanning calorimetry (DSC), X-ray diffraction (XRD) and tensile mechanical tests. All films were essentially colorless (Delta E* < 5) and with low opacity ( Y <= 2.1). The DSC results were typical of partially crystalline materials, showing some phase separation characterized by a glass transition (T(g) = 40-55 degrees C), related to the amorphous part of the material, followed by two endothermic peaks related to the melting (T(m) = 100-160 and 170-210 degrees C) of the crystallites. The XRD results confirmed the crystallinity of the films. The film produced with PVA Celvol((R)) 418 (DH = 91.8%) showed the highest tensile resistance (tensile strength = 38 MPa), for films without plasticizer. However, with glycerol, the above-mentioned PVA and the PVA Celvol((R)) 504 produced the least resistant films of all the PVA types. But, although the mechanical properties of the blended films depended on the type of PVA used, there was no direct relationship between these properties and the degree of hydrolysis of the PVA. The properties studied were more closely dependent on the glycerol concentration. Finally, the mechanical resistance of the films presented a linear relationship with the glass transition temperature of the films. (c) 2007 Elsevier Ltd. All rights reserved.

Temperature Dependence of the Intergranular Critical Current Density in Uniaxially Pressed Bi(1.65)Pb(0.35)Sr(2)Ca(2)Cu(3)O(10+delta) Samples

We have studied the normal and superconducting transport properties of Bi(1.65)Pb(0.35)Sr(2)Ca(2)Cu(3)O(10+delta) (Bi-2223) ceramic samples. Four samples, from the same batch, were prepared by the solid-state reaction method and pressed uniaxially at different compacting pressures, ranging from 90 to 250 MPa before the last heat treatment. From the temperature dependence of the electrical resistivity, combined with current conduction models for cuprates, we were able to separate contributions arising from both the grain misalignment and microstructural defects. The behavior of the critical current density as a function of temperature at zero applied magnetic field, J (c) (T), was fitted to the relationship J (c) (T)ae(1-T/T (c) ) (n) , with na parts per thousand 2 in all samples. We have also investigated the behavior of the product J (c) rho (sr) , where rho (sr) is the specific resistance of the grain-boundary. The results were interpreted by considering the relation between these parameters and the grain-boundary angle, theta, with increasing the uniaxial compacting pressure. We have found that the above type of mechanical deformation improves the alignment of the grains. Consequently the samples exhibit an enhance in the intergranular properties, resulting in a decrease of the specific resistance of the grain-boundary and an increase in the critical current density.

Rhyncophorus palmarum L. (Linnaeus, 1758): A Morphological and Histological Study of the Female Reproductive System

Rhyncophorus palmarum (Coleoptera) is a pest of great economic importance because of the damage caused in the plants of the Palmae family. This study showed that the female reproductive system of this beetle is composed of two ovaries of the telotrophic meroistic type invariably containing two ovarioles per ovary. Each ovariole is home to about 50 oocytes at different stages of maturation. The proximal region of the ovary is rather peculiar because it houses inside it a large quantity of bacilliform structures immersed in a glycolipoprotein substance, which has never before been described in the literature. The function of these structures is still unknown. However, it is suggested that they can function as a method of neutralizing the resistance of the plant because these insects are responsible for the transmission of the red ring disease to the palm plants. Microsc. Res. Tech. 74: 853-862, 2011. (C) 2010 Wiley-Liss, Inc.

Impedance Spectroscopy Analysis of the Effect of TiO2 Blocking Layers on the Efficiency of Dye Sensitized Solar Cells

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Resistance of wild and near isogenic bean lines with arcelin variants to Zabrotes subfasciatus (Boheman): I - Winter crop

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of the fluorination of DLC film on the corrosion protection of aluminum alloy (AA 5052)

It is presented a study conducted on the physical and electrochemical properties of fluorinated a-C:H films deposited onto a commercial aluminum alloy (AA 5052). The coatings were deposited from mixtures of 91% of acetylene and 9% of argon by plasma immersion ion implantation and deposition technique, PIIID. Total gas pressure was 44 Pa and deposition time (t(dep)) was varied from 300 to 1200 s. The depositing plasmas were generated by the application of radiofrequency power (13.56 MHz, 100W) to the upper electrode and high voltage negative pulses (2400 V. 300 Hz) to the sample holder. Fluorine was incorporated in a post-deposition plasma treatment (13.56 MHz, 70W, 13 Pa) generated from sulfur hexafluoride atmosphere. Chemical structure and composition of the films were investigated using infrared reflectance/absorbance spectroscopy and X-ray photoelectron spectroscopy. The corrosion resistance of the layers was determined by electrochemical impedance spectroscopy (EIS) in a 3.5% NaCl solution, at room temperature. Films presented good adhesion to the substrates and are classified as hydrogenated amorphous carbon (a-C:H) with oxygen traces. Fluorine was detected in all the samples after the post-deposition treatment being its proportion independent on the deposition time. Film thickness presented different tendencies with t(dep), revealing the variation of the deposition rate as a function of the deposition time. Such fluorinated a-C:H films improved the corrosion resistance of the aluminum surface. In a general way the corrosion resistance was higher for films prepared with lower deposition times. The variation of sample temperature with t(dep) was found to be decisive for the concentration of defects in the films and, consequently, for the performance of the samples in electrochemical tests. Results are interpreted in terms of the energy delivered to the growing layer by ionic bombardment. (C) 2010 Elsevier B.V. All rights reserved.

Electromyographic study of the trapezius (pars media) and rhomboideus major muscles in movements of the arm (part 2)

The participation of the trapezius (pars media) and rhomboideus major muscles were studied electromyographically in movements of lateral and medial rotation (free and against resistance) of the arm. In the majority of cases both muscles were inactive during the performance of the analysed movements. Cases in which only one or both muscles acted in free rotation occurred only at the second half or ending of the movement. Records of electrical potentials during against resistance rotation were due to tensional efforts at the shoulder level.

Cutaneous hypersensitivity induced in dogs and guinea-pigs by extracts of the tick Rhipicephalus sanguineus (Acari: Ixodidae)

The cutaneous hypersensitivity induced by Rhipicephalus sanguineus tick extract in dogs (natural host) and guinea-pigs (laboratory host) was evaluated. The left ear of infested and control (tick-bite naive) dogs and guinea-pigs was injected intradermally with an extract from unfed adult ticks and the right ear with phosphate buffered saline (PBS). Ear thickness variations were then measured after 10 min and 1, 2, 6, 18, 24, 48, 72 and 96 h post-injection. Results were expressed as percentual changes in the ear thickness in relation to pre-inoculation values. The final variation in ear thickness induced by the extract was given by subtracting, in each animal, the right ear percentual increase from that of the left ear. Guinea-pigs were tested at two different times following infestation and with two different doses of extract. Infested guinea-pigs from the three experiments developed an immediate (within the first 2 h post-inoculation) and a strong delayed reaction (24 h) to the extract. Dogs, unlike guinea-pigs, developed only a strong immediate reaction whereby an 80% increase in ear thickness was observed. Control animals, with the exception of one dog, did not develop any significant reaction to the extract. Only mild reactions were induced by PBS in the right ear of all animals. The correlation between the absence of a strong delayed type reaction to tick extract and the lack of resistance of the natural host to R. sanguineus tick is discussed. © 1995 Chapman & Hall.