Understanding diffusion MR imaging techniques: from scalar diffusion-weighted imaging to diffusion tensor imaging and beyond.

The complex structural organization of the white matter of the brain can be depicted in vivo in great detail with advanced diffusion magnetic resonance (MR) imaging schemes. Diffusion MR imaging techniques are increasingly varied, from the simplest and most commonly used technique-the mapping of apparent diffusion coefficient values-to the more complex, such as diffusion tensor imaging, q-ball imaging, diffusion spectrum imaging, and tractography. The type of structural information obtained differs according to the technique used. To fully understand how diffusion MR imaging works, it is helpful to be familiar with the physical principles of water diffusion in the brain and the conceptual basis of each imaging technique. Knowledge of the technique-specific requirements with regard to hardware and acquisition time, as well as the advantages, limitations, and potential interpretation pitfalls of each technique, is especially useful.

Validation of tissue modelization and classification techniques in T1-weighted MR brain images

We propose a deep study on tissue modelization andclassification Techniques on T1-weighted MR images. Threeapproaches have been taken into account to perform thisvalidation study. Two of them are based on FiniteGaussian Mixture (FGM) model. The first one consists onlyin pure gaussian distributions (FGM-EM). The second oneuses a different model for partial volume (PV) (FGM-GA).The third one is based on a Hidden Markov Random Field(HMRF) model. All methods have been tested on a DigitalBrain Phantom image considered as the ground truth. Noiseand intensity non-uniformities have been added tosimulate real image conditions. Also the effect of ananisotropic filter is considered. Results demonstratethat methods relying in both intensity and spatialinformation are in general more robust to noise andinhomogeneities. However, in some cases there is nosignificant differences between all presented methods.

Matrix-assisted laser desorption ionization-time of flight mass spectrometry as an alternative to 16S rRNA gene sequencing for identification of difficult-to-identify bacterial strains.

Conventional methods are sometimes insufficient to identify human bacterial pathogens, and alternative techniques, often molecular, are required. Matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) identified with a valid score 45.9% of 410 clinical isolates from 207 different difficult-to-identify species having required 16S rRNA gene sequencing. MALDI-TOF MS might represent an alternative to 16S rRNA gene sequencing.

Prevalence, prenatal diagnosis and clinical features of oculo-auriculo-vertebral spectrum: a registry-based study in Europe.

Oculo-auriculo-vertebral spectrum is a complex developmental disorder characterised mainly by anomalies of the ear, hemifacial microsomia, epibulbar dermoids and vertebral anomalies. The aetiology is largely unknown, and the epidemiological data are limited and inconsistent. We present the largest population-based epidemiological study to date, using data provided by the large network of congenital anomalies registries in Europe. The study population included infants diagnosed with oculo-auriculo-vertebral spectrum during the 1990-2009 period from 34 registries active in 16 European countries. Of the 355 infants diagnosed with oculo-auriculo-vertebral spectrum, there were 95.8% (340/355) live born, 0.8% (3/355) fetal deaths, 3.4% (12/355) terminations of pregnancy for fetal anomaly and 1.5% (5/340) neonatal deaths. In 18.9%, there was prenatal detection of anomaly/anomalies associated with oculo-auriculo-vertebral spectrum, 69.7% were diagnosed at birth, 3.9% in the first week of life and 6.1% within 1 year of life. Microtia (88.8%), hemifacial microsomia (49.0%) and ear tags (44.4%) were the most frequent anomalies, followed by atresia/stenosis of external auditory canal (25.1%), diverse vertebral (24.3%) and eye (24.3%) anomalies. There was a high rate (69.5%) of associated anomalies of other organs/systems. The most common were congenital heart defects present in 27.8% of patients. The prevalence of oculo-auriculo-vertebral spectrum, defined as microtia/ear anomalies and at least one major characteristic anomaly, was 3.8 per 100,000 births. Twinning, assisted reproductive techniques and maternal pre-pregnancy diabetes were confirmed as risk factors. The high rate of different associated anomalies points to the need of performing an early ultrasound screening in all infants born with this disorder.

Family interactions in IVF families: change over the transition to parenthood

Objective: This article presents a study of the change over time in the family interactions of couples who conceived through in-vitro fertilisation (IVF). Background: Observational methods are rarely used to study family interactions in families who used assisted reproductive techniques, but these methods are crucial for taking account of the communication that occurs in interactions with infants. Methods: Thirty-one couples expecting their first child were seen during the fifth month of pregnancy and when the child was nine months old. Family interactions were recorded in pre- and postnatal versions of the Lausanne Trilogue Play situation. Measures of marital satisfaction and parent-to-foetus/baby attachment or 'bonding' were also used to assess family relational dynamics. Results: Results showed that family alliance, marital satisfaction and parental attachment scores in the IVF sample were all similar to or higher than those in the reference sample during pregnancy. However, at nine months postnatally, the family alliance scores were lower. While marital satisfaction decreased over the period and parent-baby attachment increased, the family alliance scores were unstable, as no association was observed between the pre- and postnatal scores. In addition, neither prenatal marital satisfaction nor parent-foetus attachment predicted the postnatal family alliance. Conclusion: The change in the family alliance over the transition to parenthood appears to be specific to our IVF sample. Given that postnatal family functioning could not be predicted by prenatal family functioning, our observational data underline the importance of offering postnatal support to these families.

Micronization of Pharmaceuticals and Food Ingredients using Supercritical Fluid Techniques

Micronization techniques based on supercritical fluids (SCFs) are promising for the production of particles with controlled size and distribution. The interest of the pharmaceutical field in the development of SCF techniques is increasing due to the need for clean processes, reduced consumption of energy, and to their several possible applications. The food field is still far from the application of SCF micronization techniques, but there is increasing interest mainly for the processing of products with high added value. The aim of this study is to use SCF micronization techniques for the production of particles of pharmaceuticals and food ingredients with controlled particle size and morphology, and to look at their production on semi-industrial scale. The results obtained are also used to understand the processes from the perspective of broader application within the pharmaceutical and food industries. Certain pharmaceuticals, a biopolymer and a food ingredient have been tested using supercritical antisolvent micronization (SAS) or supercritical assisted atomization (SAA) techniques. The reproducibility of the SAS technique has been studied using physically different apparatuses and on both laboratory and semi-industrial scale. Moreover, a comparison between semi-continuous and batch mode has been performed. The behaviour of the system during the SAS process has been observed using a windowed precipitation vessel. The micronized powders have been characterized by particle size and distribution, morphology and crystallinity. Several analyses have been performed to verify if the SCF process modified the structure of the compound or caused degradation or contamination of the product. The different powder morphologies obtained have been linked to the position of the process operating point with respect to the vapour-liquid equilibrium (VLE) of the systems studied, that is, mainly to the position of the mixture critical point (MCP) of the mixture. Spherical micro, submicro- and nanoparticles, expanded microparticles (balloons) and crystals were obtained by SAS. The obtained particles were amorphous or with different degrees of crystallinity and, in some cases, had different pseudo-polymorphic or polymorphic forms. A compound that could not be processed using SAS was micronized by SAA, and amorphous particles were obtained, stable in vials at room temperature. The SCF micronization techniques studied proved to be effective and versatile for the production of particles for several uses. Furthermore, the findings of this study and the acquired knowledge of the proposed processes can allow a more conscious application of SCF techniques to obtain products with the desired characteristics and enable the use of their principles for broader applications.

Multidetector-row computed tomography in the preoperative diagnosis of intestinal complications caused by clinically unsuspected ingested dietary foreign bodies: a case series emphasizing the use of volume rendering techniques

Objective The present study was aimed at describing a case series where a preoperative diagnosis of intestinal complications secondary to accidentally ingested dietary foreign bodies was made by multidetector-row computed tomography (MDCT), with emphasis on complementary findings yielded by volume rendering techniques (VRT) and curved multiplanar reconstructions (MPR). Materials and Methods The authors retrospectively assessed five patients with surgically confirmed intestinal complications (perforation and /or obstruction) secondary to unsuspected ingested dietary foreign bodies, consecutively assisted in their institution between 2010 and 2012. Demographic, clinical, laboratory and radiological data were analyzed. VRT and curved MPR were subsequently performed. Results Preoperative diagnosis of intestinal complications was originally performed in all cases. In one case the presence of a foreign body was not initially identified as the causal factor, and the use of complementary techniques facilitated its retrospective identification. In all cases these tools allowed a better depiction of the entire foreign bodies on a single image section, contributing to the assessment of their morphology. Conclusion Although the use of complementary techniques has not had a direct impact on diagnostic performance in most cases of this series, they may provide a better depiction of foreign bodies' morphology on a single image section.

Diagnostic underestimation of atypical ductal hyperplasia and ductal carcinoma in situ at percutaneous core needle and vacuum-assisted biopsies of the breast in a Brazilian reference institution

Abstract Objective: To determine the rates of diagnostic underestimation at stereotactic percutaneous core needle biopsies (CNB) and vacuum-assisted biopsies (VABB) of nonpalpable breast lesions, with histopathological results of atypical ductal hyperplasia (ADH) or ductal carcinoma in situ (DCIS) subsequently submitted to surgical excision. As a secondary objective, the frequency of ADH and DCIS was determined for the cases submitted to biopsy. Materials and Methods: Retrospective review of 40 cases with diagnosis of ADH or DCIS on the basis of biopsies performed between February 2011 and July 2013, subsequently submitted to surgery, whose histopathological reports were available in the internal information system. Biopsy results were compared with those observed at surgery and the underestimation rate was calculated by means of specific mathematical equations. Results: The underestimation rate at CNB was 50% for ADH and 28.57% for DCIS, and at VABB it was 25% for ADH and 14.28% for DCIS. ADH represented 10.25% of all cases undergoing biopsy, whereas DCIS accounted for 23.91%. Conclusion: The diagnostic underestimation rate at CNB is two times the rate at VABB. Certainty that the target has been achieved is not the sole determining factor for a reliable diagnosis. Removal of more than 50% of the target lesion should further reduce the risk of underestimation.

Microcalcification evaluation in computer assisted diagnosis for digital mammography

In order to develop applications for z;isual interpretation of medical images, the early detection and evaluation of microcalcifications in digital mammograms is verg important since their presence is oftenassociated with a high incidence of breast cancers. Accurate classification into benign and malignant groups would help improve diagnostic sensitivity as well as reduce the number of unnecessa y biopsies. The challenge here is the selection of the useful features to distinguish benign from malignant micro calcifications. Our purpose in this work is to analyse a microcalcification evaluation method based on a set of shapebased features extracted from the digitised mammography. The segmentation of the microcalcificationsis performed using a fixed-tolerance region growing method to extract boundaries of calcifications with manually selected seed pixels. Taking into account that shapes and sizes of clustered microcalcificationshave been associated with a high risk of carcinoma based on digerent subjective measures, such as whether or not the calcifications are irregular, linear, vermiform, branched, rounded or ring like, our efforts were addressed to obtain a feature set related to the shape. The identification of the pammeters concerning the malignant character of the microcalcifications was performed on a set of 146 mammograms with their real diagnosis known in advance from biopsies. This allowed identifying the following shape-based parameters as the relevant ones: Number of clusters, Number of holes, Area, Feret elongation, Roughness, and Elongation. Further experiments on a set of 70 new mammogmms showed that the performance of the classification scheme is close to the mean performance of three expert radiologists, which allows to consider the proposed method for assisting the diagnosis and encourages to continue the investigation in the senseof adding new features not only related to the shape

Comparison of two commercial kits and two extraction methods for fecal glucocorticoid analysis in ocelots (Leopardus pardalis) submitted to ACTH challenge

The ocelot (Leopardus pardalis) is included in list of wild felid species protected by CITES and is part of conservation strategies that necessarily involve the use of assisted reproduction techniques, which requires practical and minimally invasive techniques of high reproducibility that permit the study of animal reproductive physiology. The objective of this study was to compare and validate two commercial assays: ImmuChem Double Antibody Corticosterone 125I RIA from ICN Biomedicals, Costa Mesa, CA, USA; and Coat-a-Count Cortisol 125I RIA from DPC, Los Angeles, CA, USA, for assessment of fecal glucocorticoid metabolites in ocelots submitted to ACTH (adrenocorticotropic hormone) challenge. Fecal samples were collected from five ocelots kept at the Brazilian Center of Neotropical Felines, Associação Mata Ciliar, São Paulo, Brazil, and one of the animals was chosen as a negative control. The experiment was conducted over a period of 9 days. On day 0, a total dose of 100 IU ACTH was administered intramuscularly. Immediately after collection the samples were stored at 20C in labeled plastic bags. The hormone metabolites were subsequently extracted and assayed using the two commercial kits. Previously it was performed a trial with the DPC kit to check the best extraction method for hormones metabolites. Data were analyzed with the SAS program for Windows V8 and reported as means ± SEM. The Schwarzenberger extraction method was slightly better when compared with the Wasser extraction method (103,334.56 ± 19,010.37ng/g of wet feces and 59,223.61 ± 12,725.36ng/g of wet feces respectively; P=0,0657). The ICN kit detected an increase in glucocorticoid metabolite concentrations in a more reliable manner. Metabolite concentrations (ng/g wet feces) on day 0 and day 1 were 66,956.28 ± 36,786.93 and 92,991.19 ± 28,555.63 for the DPC kit, and 205,483.32 ± 83,811.32 and 814,578.75 ± 292,150.47 for the ICN kit, respectively. The limit of detection for the ICN kit was 7.7 ng/mL for 100% B/Bo (25ng/mL for 88%B/Bo) and for the DPC kit it was 0.2ug/dL for 90.95% B/Bo (1ug/dL for 81.27% B/Bo). In conclusion it was confirmed that the Schwarzenberger extraction method and the ICN kit are superior for extracting and measuring fecal glucocorticoid metabolites in ocelot fecal samples.

Reproductive biology and cytology of Hypericum brasiliense Choisy (Hypericaceae)

This is the first study of reproductive biology and cytology carried out with Hypericum brasiliense, a species with medicinal properties and potential agronomic interest. Three populations of H. brasiliense collected at Southeastern Brazil were studied. The results indicate that H. brasiliense is preferentially allogamous, self-compatible, facultative apomitic and anemophilous. Male sterility was observed in about 50% of individuals from the three populations. Anatomical studies evidenced structural abnormalities in anthers of male sterile flowers, showing enlarged tapetal cells and thick secretion deposits on the tapetal cell surfaces that may cause nutritional deficit for pollen mother cells. In cytogenetic studies several haploid chromosome numbers were observed like n = 4, 8, 9, 11, 16 and 17, including the presence of multivalents and micronuclei in tetrads, indicating the occurrence of abnormalities in the meiotic process of H. brasiliense. Despite these meiotic abnormalities the pollen viability and in vitro pollen germination rate observed in fertile flowers may be considered high. The diploid chromosome number 2n = 16 was observed, and the chromosomes in metaphase were small and similar. Fluorochrome staining techniques using DAPI and CMA3 were applied, with no positive bands observed.

Surface studies of limestones and dolostones : characterisation using various techniques and batch dissolution experiments with hydrochloric acid solutions

In this thesis, stepwise titration with hydrochloric acid was used to obtain chemical reactivities and dissolution rates of ground limestones and dolostones of varying geological backgrounds (sedimentary, metamorphic or magmatic). Two different ways of conducting the calculations were used: 1) a first order mathematical model was used to calculate extrapolated initial reactivities (and dissolution rates) at pH 4, and 2) a second order mathematical model was used to acquire integrated mean specific chemical reaction constants (and dissolution rates) at pH 5. The calculations of the reactivities and dissolution rates were based on rate of change of pH and particle size distributions of the sample powders obtained by laser diffraction. The initial dissolution rates at pH 4 were repeatedly higher than previously reported literature values, whereas the dissolution rates at pH 5 were consistent with former observations. Reactivities and dissolution rates varied substantially for dolostones, whereas for limestones and calcareous rocks, the variation can be primarily explained by relatively large sample standard deviations. A list of the dolostone samples in a decreasing order of initial reactivity at pH 4 is: 1) metamorphic dolostones with calcite/dolomite ratio higher than about 6% 2) sedimentary dolostones without calcite 3) metamorphic dolostones with calcite/dolomite ratio lower than about 6% The reactivities and dissolution rates were accompanied by a wide range of experimental techniques to characterise the samples, to reveal how different rocks changed during the dissolution process, and to find out which factors had an influence on their chemical reactivities. An emphasis was put on chemical and morphological changes taking place at the surfaces of the particles via X-ray Photoelectron Spectroscopy (XPS) and Scanning Electron Microscopy (SEM). Supporting chemical information was obtained with X-Ray Fluorescence (XRF) measurements of the samples, and Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) and Inductively Coupled Plasma-Optical Emission Spectrometry (ICP-OES) measurements of the solutions used in the reactivity experiments. Information on mineral (modal) compositions and their occurrence was provided by X-Ray Diffraction (XRD), Energy Dispersive X-ray analysis (EDX) and studying thin sections with a petrographic microscope. BET (Brunauer, Emmet, Teller) surface areas were determined from nitrogen physisorption data. Factors increasing chemical reactivity of dolostones and calcareous rocks were found to be sedimentary origin, higher calcite concentration and smaller quartz concentration. Also, it is assumed that finer grain size and larger BET surface areas increase the reactivity although no certain correlation was found in this thesis. Atomic concentrations did not correlate with the reactivities. Sedimentary dolostones, unlike metamorphic ones, were found to have porous surface structures after dissolution. In addition, conventional (XPS) and synchrotron based (HRXPS) X-ray Photoelectron Spectroscopy were used to study bonding environments on calcite and dolomite surfaces. Both samples are insulators, which is why neutralisation measures such as electron flood gun and a conductive mask were used. Surface core level shifts of 0.7 ± 0.1 eV for Ca 2p spectrum of calcite and 0.75 ± 0.05 eV for Mg 2p and Ca 3s spectra of dolomite were obtained. Some satellite features of Ca 2p, C 1s and O 1s spectra have been suggested to be bulk plasmons. The origin of carbide bonds was suggested to be beam assisted interaction with hydrocarbons found on the surface. The results presented in this thesis are of particular importance for choosing raw materials for wet Flue Gas Desulphurisation (FGD) and construction industry. Wet FGD benefits from high reactivity, whereas construction industry can take advantage of slow reactivity of carbonate rocks often used in the facades of fine buildings. Information on chemical bonding environments may help to create more accurate models for water-rock interactions of carbonates.

Enjeux éthiques et légaux des applications du diagnostic préimplantatoire au Canada

"Mémoire présenté à la Faculté des études supérieures en vue de l'obtention du grade de LLM en maîtrise option recherche axe Droit, Biotechnologies et Société"

Les gènes et protéines BSP chez la souris et l’humain : clonage, caractérisation, expression sous forme recombinante et étude des fonctions biologiques

L’infertilité affecte environ 15% des couples en âge de se reproduire. Dans près de la moitié des cas, des facteurs masculins sont à la base de l’infertilité, quoique les causes exactes demeurent souvent inconnues. Les spermatozoïdes de mammifères subissent une série d’étapes de maturation avant d’acquérir la capacité de féconder un ovocyte. Les premiers changements ont lieu à l’intérieur de l’épididyme, où les spermatozoïdes gagnent la capacité de se mouvoir ainsi que de reconnaître et d’interagir avec l’ovocyte. Suite à l’éjaculation, ils doivent subir une seconde série de modifications à l’intérieur du tractus génital femelle, nommée capacitation. Nous avons préalablement démontré que chez le bovin, la famille de protéines BSP (Binder of SPerm) est essentielle à la capacitation. Des homologues des BSP ont aussi été isolés du fluide séminal de porc, de bouc, de bélier, de bison et d’étalon. Malgré la détection d’antigènes apparentés aux BSP dans le fluide séminal de souris et d’humain, les homologues des BSP n’ont jamais été caractérisés chez ces espèces. Nous avons émis l’hypothèse que des homologues des BSP seraient exprimés chez la souris et l’humain et joueraient un rôle dans la maturation des spermatozoïdes. Nous avons démontré que des séquences homologues aux BSP sont présentes dans les génomes murin et humain. Le génome murin contient trois séquences; Bsph1, Bsph2a et Bsph2b, tandis qu’une seule séquence (BSPH1) a été identifée chez l’humain. Les séquences d’ADNc de Bsph1, Bsph2a et BSPH1 ont été clonées, tandis que Bsph2b serait probablement un pseudogène. Les trois gènes sont exprimés uniquement dans l’épididyme et font partie d’une sous-famille distincte à l’intérieur de la famille des BSP. Chez les ongulés, les BSP sont exprimées par les vésicules séminales, sont ajoutées aux spermatozoïdes lors de l’éjaculation et représentent une proportion significative des protéines du plasma séminal. Au contraire, les BSP épididymaires ne sont retrouvées qu’en faibles quantités dans le fluide séminal. L’étude de leur rôle dans les fonctions spermatiques était donc plus difficile que chez les ongulés, où l’isolement des protéines natives du plasma séminal à l’aide de techniques de chromatographie était possible. Afin d’étudier sa fonction, nous avons exprimé BSPH1 recombinante dans E. coli. Les ponts disulfure des domaines de type-II caractéristiques de ces protéines ont fait en sorte que l’expression de BSPH1 fusionnée à une étiquette hexahistidine ou glutathion-S-transférase a donné lieu à des protéines insolubles dans les corps d’inclusion. La production de BSPH1 soluble a été possible grâce à l’ajout d’une étiquette thiorédoxine et l’expression dans une souche au cytoplasme oxidatif. BSPH1 a été purifiée par affinité et sa liaison aux partenaires connus des BSP, la phosphatidylcholine, les lipoprotéines de faible densité et la membrane des spermatozoïdes, suggérait que la protéine recombinante possédait sa conformation native et pouvait être utilisée pour des essais fonctionnels. La forme native de BSPH1 a été détectée dans le plasma séminal humain suite au fractionnement par gel filtration. La liaison de BSPH1 native à une colonne d’affinité à l’héparine a indiqué qu’elle partage aussi cette propriété de liaison avec la famille des BSP, et pourrait lier les GAGs semblables à l’héparine du tractus génital féminin. Une colonne d’immunoaffinité anti-BSPH1 a été préparée à l’aide d’anticorps générés contre des protéines recombinantes, et a permis d’isoler BSPH1 native à partir d’extraits de spermatozoïdes humains. Nos résultats montrent que BSPH1 native serait localisée dans les microdomaines « rafts » de la membrane. Sa masse moléculaire apparente était de 32 kDa, ce qui est supérieur à la masse prédite selon sa séquence en acides aminés, indiquant la présence probable de modifications post-traductionnelles, ou d’une migration anormale. L’effet de BSPH1 recombinante et des anticorps anti-BSPH1 sur la motilité, la viabilité et la capacitation a aussi été étudié. Les deux dernières variables ont été mesurées par un essai de cytométrie en flux, optimisé dans cette étude. Aucun effet des protéines recombinantes ou des anticorps sur la motilité et la viabilité des spermatozoïdes n’a été noté. Quoiqu’une stimulation modeste, quoique significative, de la capacitation ait été observée à la plus faible concentration de BSPH1, les concentrations plus élevées n’ont pas montré d’effet. De la même manière, les anticorps anti-BSPH1 n’ont pas eu d’effet significatif sur la capacitation. Ces résultats suggèrent que BSPH1 produite dans E. coli n’affecte pas la capacitation de façon marquée. Cependant, puisque BSPH1 native possède probablement des modifications post-traductionnelles, une protéine recombinante produite dans des cellules de mammifères pourrait affecter les fonctions spermatiques. De manière alternative, les BSP épididymaires remplissent peut-être un rôle différent dans les fonctions spermatiques que celles sécrétées par les vésicules séminales des ongulés. Les résultats décrits dans cette thèse pourraient contribuer à améliorer le diagnostic de l’infertilité masculine, ainsi que les techniques de reproduction assistée et éventuellement, pourraient mener au développement de contraceptifs masculins.

Désir d'enfant, procréation médicalement assistée et adoption : réflexion sur la définition des liens de parenté

Le contexte social dans lequel s’inscrivent le désir d’enfant et la procréation en Occident s’est profondément transformé au cours des dernières décennies. Après l’introduction de la contraception et l’augmentation du nombre d’enfants nés hors mariage, le développement des nouvelles techniques reproductives et de l’adoption, notamment l’adoption internationale, ont à leur tour contribué à la transformation des cadres dans lesquels s’inscrivent les relations de parenté et la formation des familles. À partir de l’étude de témoignages de couples québécois dont les échecs successifs en procréation médicalement assistée (PMA) ont mené à la décision d’adopter, cette thèse interroge les multiples dimensions qu’implique un tel type de trajectoire. Sur le plan social, tant la procréation médicalement assistée que l’adoption nécessitent l’intervention d’une tierce partie pour concrétiser et faire reconnaître l’établissement du lien filiatif, soit la médecine dans le cas de la PMA et celle des autorités juridiques et gouvernementales dans le cas de l’adoption. Les deux phénomènes mettent également en scène des situations et des enjeux hautement révélateurs des valeurs et des représentations collectives en matière de parenté et de famille. D’un premier abord, le type de parcours étudié semble illustrer le passage entre deux sphères complètement distinctes: celle de la nature et du biologique incarnée par la PMA et celle de la culture et du lien social incarnée par l’adoption. Or, l’étude des trajectoires des participants donne à voir une situation beaucoup plus complexe où s’entremêlent un ensemble d’explications et de facteurs relatifs au désir d’enfant, à la famille, à la parentalité qui ne font sens qu’une fois replacés dans le contexte des grandes tendances sociales et idéologiques qui traversent notre société. Plus globalement, les analyses proposées dans cette thèse participent au développement d’une anthropologie de la parenté qui tienne compte des dynamiques et des tensions qui touchent la famille moderne.