Alterações morfofisiológicas e moleculares em resposta a estresses abióticos em mamona (Ricinus communis L.)

The use of fossil fuels has been considered one of reason for the increase of pollution in the atmosphere and it may be related to the climate changes. Then, the research of the new sources of fuels will be important. Considering this, the use of biodiesel has been considered not as bad as petrol. The castor bean (Ricinus communis L.) is an important oilseed, which belongs to Euphorbiaceae family, and the oil found in the seed has important characteristics for biodiesel. This plant is considered as “rustic” as it does not need so much water for its development and oil production. Due to this, this plant has been considered to be ideal in semi-arid regions, such as the Northeast of Brazil. The aim of his study is to better understand the responses to abiotic stresses (drought and salinity) from castor bean plants using morphological, physiological and molecular tools. In order to do this, the castor bean plants were subjected to salt stress (50, 100, 150 and 200 mM NaCl) in a controlled environment and drought stress (5, 10, 15 days and 10 days cyclic). After these treatments, these plants were subjected to different analyzes: a) the expansion and retention of water from leaves; b) anatomy using leaves and roots. Based on these results, we found that castor suffered decrease in leaf area with increase drought stress, however restricted water loss, probably by accumulation of compatible solutes in the leaves. The anatomy data showed modifications in the vascular system. These modifications observed suggested that castor bean plant may be resistant to stress as it was verified in 5 days of drought as well as in 100 mM NaCl. In both conditions, these plants were fine. Probably these plants keep some solutes in the cell and then maintain the cell tugor. The data obtained in this study gave a better idea how castor bean plant responds to abiotic stress conditions - drought and salt stress

Correlação entre caracteres e análise de trilha em progênies de mamona (Ricinus communis L.) em condições de safrinha no estado de São Paulo.

Foi instalado um ensaio de avaliação de 73 progênies do Programa de Melhoramento de mamona do Instituto Agronômico que foi utilizado para estimar valores da correlação entre 12 caracteres agronômicos, em Campinas (SP), Brasil, em fevereiro, e avaliado na safrinha de 2007, em blocos casualizados com três repetições, incluindo sete testemunhas comerciais. A análise de trilha foi empregada para particionar os valores de correlação em efeitos diretos e indiretos sobre a produção de grãos. Valores de correlação positivos e significativos foram obtidos entre produção de grãos e todas as características de arquitetura da planta, dos racemos primários e secundários e os componentes da produção avaliados. A altura da planta, altura, comprimento e número de frutos do racemo secundário, além da produção dos racemos primários e secundários tiveram efeitos diretos positivos sobre a produção de grãos, podendo ser utilizados na seleção indireta, nas condições de safrinha.

Color stability and surface roughness of artificial teeth brushed with an experimental Ricinus communis toothpaste

Aim: To evaluate, in vitro, the effect of brushing with a Ricinus communis -based experimental toothpaste on color stability and surface roughness of artificial teeth. Methods: Ninety artificial teeth (maxillary central incisors) in different shades, light and dark (NatusDent Triple Pressing, Dentbras) were used. Initial color (Spectrophotometer Easyshade, VITA) and surface roughness (Rugosimeter Surfcorder SE 1700, Kosakalab) readouts were performed. After baseline measurements, samples were assigned to 10 groups (n=9) according to the artificial tooth shade and type of toothpaste used during the mechanical brushing test (Pepsodent, MAVTEC): Sorriso Dentes Brancos – SDB, Colgate Luminous White - CLW (Colgate-Palmolive), Close up White Now - CWN (Unilever), Trihydral - THL (Perland Pharmacos) and Ricinus communis - RCE (Experimental). After 29,200 cycles of brushing, corresponding to 2 years of brushing by a healthy individual, new color and roughness readouts of the specimens were performed. Data (before and after the tests) were statistically analyzed (2-way repeated measures ANOVA, Tukey, p<0.05). Results: RCE toothpaste produced the greatest color stability for dark tooth shade and the second best color stability for light tooth shade. For surface roughness alteration, there was no difference (p>0.05) for any tested toothpaste regardless of tooth shade. Conclusions: The experimental Ricinus communis toothpaste did not cause color and surface roughness alteration in the artificial teeth, and it may be considered a suitable option for denture cleaning.

Activity of Ricinus communis (Euphorbiaceae) and ricinine against the leaf-cutting ant Atta sexdens rubropilosa (Hymenoptera : Formicidae) and the symbiotic fungus Leucoagaricus gongylophorus

The focus of this study was the identification of compounds from plant extracts for use in crop protection. This paper reports on the toxic activity of fractions of leaf extracts of Ricinus communis L (Euphorbiaceae) and isolated active compounds in the leaf-cutting ant Atta sexdens rubropilosa Forel and its symbiotic fungus Leucoagaricus gongylophorus (Singer) Moller. The main compounds responsible for activity against the fungus and ant in leaf extracts of R communis were found to be fatty acids for the former and ricinine for the ants. (C) 2004 Society of Chemical Industry.

Avaliação de progênies de mamona (Ricinus communis L.) para produção e rendimento de semente em condições de safrinha no Estado de São Paulo.

Foi instalado um ensaio de avaliação de 73 progênies do Programa de Melhoramento de mamona do Instituto Agronômico para dias para florescimento dos racemos, produção de grãos e rendimento de grãos, em Campinas-SP, em fevereiro, e avaliado na safrinha de 2007, em blocos casualisados com três repetições, incluindo sete testemunhas comerciais. A análise de variância e a distribuição de médias para produção de grãos evidenciaram a larga variabilidade e o potencial dos materiais para o melhoramento. As progênies mais produtivas foram: PB72II com 804,07 g; PB05II com 755,20 g; TS38 com 716,13 g; PB08II com 714,67 g e PB48 com 698,00 g, e não foram melhores que a testemunha mais produtiva, IAC 2028 com 1019,67 g. Os rendimentos no processamento das sementes foram bastante variados e refletiram a ocorrência de déficits hídricos de severidade moderada, com alto número de sementes chochas ou não granadas. Os resultados mostraram o elevado potencial para o melhoramento do conjunto de progênies estudado e a possibilidade de plantio da cultura da mamona em condição de safrinha no Sudeste do Brasil.

Caracterização de progênies de mamona (Ricinus communis L.) para arquitetura de planta em condições de safrinha no Estado de São Paulo.

A arquitetura da mamoneira é bastante variável, constituída por caracteres que apresentam, geralmente, herança independente que se encontram distribuídos pelo germoplasma da espécie. Variações nos padrões de arquitetura das plantas de mamona possibilitam novas distribuições espaciais na implantação da cultura, viabilizando diferentes métodos de cultivo e novas épocas de semeadura para a espécie. Foi instalado um ensaio de avaliação com 73 progênies do Programa de Melhoramento de Mamona do Instituto Agronômico - IAC e sete materiais comerciais como testemunhas intercalares. O delineamento experimental foi em blocos casualisados com três repetições e as parcelas foram semeadas em fevereiro de 2007, em Campinas, SP. Foram avaliados os caracteres: altura da planta, altura do racemo primário, altura do racemo secundário, diâmetro do caule, número de entrenós e tamanho de entrenós. Os resultados da análise de variância e a distribuição de médias para os caracteres avaliados evidenciaram a larga variabilidade e o potencial dos materiais para o melhoramento, além da possibilidade de cultivo da mamona em condição de safrinha no Sudeste do Brasil.

Avaliação da arquitetura dos racemos e produção de progênies de mamona (Ricinus communis L.) em condições de safrinha no Estado de São Paulo.

Foi instalado um ensaio de avaliação com 73 progênies do Programa de Melhoramento de Mamona do Instituto Agronômico - IAC e sete materiais comerciais como testemunhas intercalares. O delineamento experimental foi em blocos casualisados com três repetições e as parcelas foram plantadas em fevereiro de 2007, em Campinas, SP. Foram avaliadas as características dos racemos primários e secundários: quanto ao comprimento (CRP e CRS, em centímetros), número de frutos (NFRP e NFRS), produção de grãos (PRP e PRS, em gramas) e rendimento no descascamento (RRP e RRS, em %) de cinco plantas de 73 progênies de mamona desenvolvidas pelo Programa de Melhoramento. Foram conduzidas análises de variâncias sendo as progênies separadas pelo grupo de seleção sendo 42 da seleção PBII, 15 da seleção PB e 16 da seleção TS. Embora as condições ambientais não favoráveis da safrinha tenham contribuído para o elevado coeficiente de variação observado para alguns caracteres, quadrados médios altamente significativos, para caracteres do racemo primário, foram encontrados para diferença entre médias de Genótipos, Genótipos dentro de PBII e entre Seleções, exceto para número de frutos que foi não significativo. Nos caracteres do racemo secundário, foram encontrados testes F altamente significativos (P<0,01) para diferenças entre Genótipos e entre Genótipos dentro do grupo PBII. Diferenças não significativas foram detectadas entre Seleções e entre Genótipos dentro do Grupo PB, exceto para rendimento no descascamento que apresentou P<0,05. São apresentadas as distribuições de médias para os caracteres.

Bacterial leakage evaluation of root canals filled with different endodontic sealers

Objective. The objective of this study was to evaluate the sealing ability of AH Plus, Epiphany, Acroseal, Endofill, and Polifil after active lateral condensation technique, by using a bacterial test, during 64 days. Study design. One hundred bovine incisors were cleaned and shaped; then they were filled with the endodontic sealers and adapted into a microcentrifuge tube. The setup root/microcentrifuge tube was added to glass flasks containing Brain Heart Infusion broth. A culture of Enterococcus faecalis was inserted into the upper chamber of each assembly. Daily leakage was evaluated through the broth turbidity. Results. The results were submitted to statistical analysis (Kaplan-Meier method, Kruskal-Wallis and Dunn tests). Conclusions. AH Plus and Endofill had the worst sealing ability when compared with Polifil, which showed the least leakage. Acroseal and Epiphany showed a tendency toward having an intermediate behavior; however, there was no significant difference among Acroseal, Epiphany, and the other sealers. (Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2009; 108: e56-e60)

Characterization of Polyurethane Resins by FTIR, TGA, and XRD

Fourier Transformed Infrared Spectroscopy, Thermogravimetric Analysis, and X-ray Diffractometry have been used to investigate the rigid, semi rigid, and soft polyurethane (PU) forms, which were developed by the Group of Analytic Chemistry and Technology of Polymers - USF - Sao Carlos. The -NCO/-OH ratios were 0.6, 0.5, and 0.3% for rigid, semi rigid, and soft PUs, respectively, showing that different ratios cause differences in thermal behaviors and crystalline structures of the synthesized PU resins. (C) 2009 Wiley Periodicals, Inc. J Appl Polym Sci 115: 263-268, 2010

Polyurethane and PTFE membranes for guided bone regeneration: Histopathological and ultrastructural evaluation

Objective: The purpose of this study was to research a membrane material for use in guided bone regeneration. Study design: In this study, 25 male Wistar rats were used to analyze the biocompatibility and degradation process of biomembranes. The morphological changes in subcutaneous implantations were assessed after 7, 14, 21, 28 and 70 days. The materials were made of polyurethane polymer (AUG) obtained from vegetal oil (Ricinus communis) and polytetrafluoroethylene membrane (PTFE). The surface characteristics of the physical barriers in scanning electronic microscopic (SEM) were also evaluated. Results: In both groups, the initial histological analysis showed moderate inflammatory infiltrate, which was predominantly polymorphonuclear. There was also a presence of edema, which was gradually replaced by granulation tissue, culminating in a fibrous capsule. In the AUG group, some multinucleated giant cells were present in the contact interface, with the space previously occupied by the material. However, membrane degradation was not observed during the period studied. According to the present SEM findings, porosity was not detected in the AUG or PTFE membranes. Conclusion: The researched material is biocompatible and the degradation process is extremely slow or may not even occur at all.

Estudo das propriedades termofísicas com variação da expansibilidade de compósito desenvolvido com matriz PUR-NOP e carga funcional de argilomineral

In this study were conducted experimental procedures for determination of variation of the expandability of rigid polyurethane foam (PUR) from a natural oil polyol (NOP), specifically the Castor oil plant, Ricinus communis, pure and additions of the vermiculite in phase dispersed in different percentage within a range from 0% to 20%, mass replacement. From the information acquired, were defined the parameters for production of bodies of test, plates obtained through controlled expansion, with the final volume fixed. Initially, the plates were subjected to thermal performance tests and evaluated the temperature profiles, to later be extracted samples duly prepared in accordance with the conditions required for each test. Was proceeded then the measurement of the coefficient of thermal conductivity, volumetric capacity heat and thermal diffusivity. The findings values were compared with the results obtained in the tests of thermal performance, contributing to validation of the same. Ultimately, it was investigated the influence that changes in physical-chemical structure of the material had exerted on the variation of thermophysical quantities through gas pycnometry, scanning electron microscopy (SEM) combined with energy dispersive X-ray fluorescence spectroscopy (EDXRF), infrared spectroscopy using Fourier transform (FTIR), thermogravimetric analysis (TGA) and differential thermal analysis (DTA). Based on the results obtained was possible to demonstrate that all load percentage analyzed promoted an increase in the potential expansion (PE) of the resin. In production of the plates, the composites with density near at the free expansion presented high contraction during the cure, being the of higher density adopted as definitive standard. In the thermal performance tests, the heating and cooling curves of the different composites had presented symmetry and values very close for lines of the temperature. The results obtained for the thermophysical properties of composites, showed little difference in respect of pure foam. The percentage of open pores and irregularities in the morphology of the composites were proportionate to the increment of vermiculite. In the interaction between the matrix and dispersed phase, there were no chemical transformations in the region of interface and new compounds were not generated. The composites of PUR-NOP and vermiculite presented thermal insulating properties near the foam pure and percentage significantly less plastic in its composition, to the formulation with 10% of load

Ação de biomateriais e laser de baixa intensidade na reparação tecidual óssea: estudo histológico em ratos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

A castor oil-containing dental luting agent: effects of cyclic loading and storage time on flexural strength

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Diametral tensile strength and film thickness of an experimental dental luting agent derived from castor oil

The need to develop new dental luting agents in order to improve the success of treatments has greatly motivated research. Objective: The aim of this study was to evaluate the diametral tensile strength (DTS) and film thickness (FT) of an experimental dental luting agent derived from castor oil (COP) with or without addition of different quantities of filler (calcium carbonate - CaCO3). Material and Methods: Eighty specimens were manufactured (DTS N=40; FT N=40) and divided into 4 groups: Pure COP; COP 10%; COP 50% and zinc phosphate (control). The cements were mixed according to the manufacturers' recommendations and submitted to the tests. The DTS test was performed in the MTS 810 testing machine (10 KN, 0.5 mm/min). For FT test, the cements were sandwiched between two glass plates (2 cm(2)) and a load of 15 kg was applied vertically on the top of the specimen for 10 min. The data were analyzed by means of one-way ANOVA and Tukey's test (alpha=0.05). Results: The values of DTS (MPa) were: Pure COP- 10.94 +/- 1.30; COP 10%- 30.06 +/- 0.64; COP 50%- 29.87 +/- 0.27; zinc phosphate- 4.88 +/- 0.96. The values of FT (pm) were: Pure COP- 31.09 +/- 3.16; COP 10%- 17.05 +/- 4.83; COP 50%- 13.03 +/- 4.83; Zinc Phosphate- 20.00 +/- 0.12. One-way ANOVA showed statistically significant differences among the groups (DTS - p=1.01E-40; FT - p=2.4E-10). Conclusion: The experimental dental luting agent with 50% of filler showed the best diametral tensile strength and film thickness.

The influence of supra-optimal root-zone temperatures on growth and stomatal conductance in Capsicum annuum L.

Pepper (Capsicum annuum L.) plants were grown aeroponically in a Singapore greenhouse under natural diurnally fluctuating ambient shoot temperatures, but at two different root-zone temperatures (RZTs): a constant 20 +/- 2 degrees C RZT and a diurnally fluctuating ambient (A) (25-40 degrees C) RZT, Plants grown at 20-RZT had more leaves, greater leaf area and dry weight than A-RZT plants. Reciprocal transfer experiments were conducted between RZTs to investigate the effect on plant growth, stomatal conductance (g(s)) and water relations. Transfer of plants from A-RZT to 20-RZT increased plant dry weight, leaf area, number of leaves, shoot water potential (Psi(shoot)), and g(s); while transfer of plants from 20-RZT to A-RZT decreased these parameters. Root hydraulic conductivity was measured in the latter transfer and decreased by 80% after 23 d at A-RZT. Transfer of plants from 20-RZT to A-RZT had no effect on xylem ABA concentration or xylem nitrate concentration, but reduced xylem sap pH by 0.2 units. At both RZTs, g(s) measured in the youngest fully expanded leaves increased with plant development. In plants with the same number of leaves, A-RZT plants had a higher g(s) than 20-RZT plants, but only under high atmospheric vapour pressure deficit. The roles of chemical signals and hydraulic factors in controlling g(s) of aeroponically grown Capsicum plants at different RZTs are discussed.