The minimum quantity of lubricant (MQL) technique in the surface grinding of steel

This research aimed to analyze the viability of the minimum quantity of lubricant (MQL) technique towards different methods of lubri-refrigeration in surface grinding of steel, considering process quality, wheel life and the viability of using cutting fluids The proposal methods were the conventional (abundant fluid flow), the minimum quantity lubrication (MQL) and the optimized method with Webster nozzle (rounded) This analysis was carried out in equal machining conditions, through the assessment of variables such as grinding force, surface roughness, G ratio (volume of removed material/volume of wheel wear), and microhardness The results showed the possibility of improvement of the grinding process Besides, there is the opportunity for production of high quality workpieces with lower costs The MQL technique showed efficiency in machining with lower depths of cut The optimized method with Webster nozzle applies the fluid in a rational way, without considerable waste Hence, the results show that industry can rationalize and optimize the application of cutting fluids, avoiding inappropriate disposal, inadequate use and consequently environment pollution

External and internal structure of Atta bisphaerica Forel (Hymenoptera: Formicidae) nests

This work was carried out to determine the internal and external structures of Atta bisphaerica (Forel) nests. Six nests were excavated and during excavation, all data referring to chambers and tunnels were recorded. Three nests had been internally cement-moulded, which enabled a better view of the chamber and tunnel structures. Atta bisphaerica nests presented a similar structural pattern, varying only in the number of chambers as a function of external mound area. Chambers were spherical with two communication tunnels. Internal tunnels had an elliptical section, sometimes circular, indirectly linked to chambers through ramifications and directly through short tunnels. Entrance holes were linked to the area of highest chamber concentration by tunnels from the elliptical section, which led to the nest in a radial manner. Knowledge of the colony's three-dimensional architecture permits successful application of chemical control processes, reduces the quantity of product applied, and consequently diminishes costs and environmental damage.

Selection of desulfurizing agents and optimization of operational variables in hot metal desulfurization

The growing demand for steels with tighter compositional specifications led the Companhia Siderúrgica Nacional (CSN) to develop more efficient processes. To solve this problem this paper aims to identify the operational variables more impacting in the desulfurization process, specifically in torpedo car, as well as its causes and solutions. Then select and test, with laboratorial and industrial tests, desulfurizing agents based of CaC 2, CaO, CaCO3, and Mg to assess the cost per quantity of product desulfurized. The mixture with best results was not that one with highest content of CaC2. It is believed that this mixture showed better efficiency because of the increased agitation of the bath, produced by the releasing of gas from compound CaCO3 present in this mixture. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Impact of Quantity of Resin, C-factor, and Geometry on Resin Composite Polymerization Shrinkage Stress in Class V Restorations

Objective: This study evaluated the effect of quantity of resin composite, C-factor, and geometry in Class V restorations on shrinkage stress after bulk fill insertion of resin using two-dimensional finite element analysis.Methods: An image of a buccolingual longitudinal plane in the middle of an upper first premolar and supporting tissues was used for modeling 10 groups: cylindrical cavity, erosion, and abfraction lesions with the same C-factor (1.57), a second cylindrical cavity and abfraction lesion with the same quantity of resin (QR) as the erosion lesion, and then all repeated with a bevel on the occlusal cavosurface angle. The 10 groups were imported into Ansys 13.0 for two-dimensional finite element analysis. The mesh was built with 30,000 triangle and square elements of 0.1 mm in length for all the models. All materials were considered isotropic, homogeneous, elastic, and linear, and the resin composite shrinkage was simulated by thermal analogy. The maximum principal (MPS) and von Mises stresses (VMS) were analyzed for comparing the behavior of the groups.Results: Different values of angles for the cavosurface margin in enamel and dentin were obtained for all groups and the higher the angle, the lower the stress concentration. When the groups with the same C-factor and QR were compared, the erosion shape cavity showed the highest MPS and VMS values, and abfraction shape, the lowest. A cavosurface bevel decreased the stress values on the occlusal margin. The geometry factor overcame the effects of C-factor and QR in some situations.Conclusion: Within the limitations of the current methodology, it is possible to conclude that the combination of all variables studied influences the stress, but the geometry is the most important factor to be considered by the operator.

Influence of the quantity of coloring agent in bleaching gels activated with LED/laser appliances on bleaching efficiency

The aim of this study was to assess the influence of the quantity of coloring agent on the bleaching efficiency of gels containing 35% H2O2. Sixty human third molars were sectioned mesiodistally, darkened in a coffee solution and sectioned in the occlusal-cervical direction, resulting in mesial (not bleached) and distal halves (bleached). They were distributed into three groups: Whiteness HP, Total Bleach, and Whiteform Perox Red Gel; and subdivided into four sub-groups: no coloring agent, manufacturer's standard, double the standard, and triple the standard. The gels were activated with light-ermitting diode/laser appliances. The images were analyzed with the Adobe Photoshop program (deltaEL*a*b*). The variation was submitted to the ANOVA test (two factors: type of gel and quantity of coloring agent) and Tukey test. Differences were observed for the quantity of coloring agent. The mean (+/-SD) was determined for each quantity of coloring used: no coloring agent -6.85 (+/-2.26)a, manufacturer's standard -794 (+/-2.55)ab, double the standard -8.65 (+/-2.47)b, triple the standard -9.05 (+/-2.72)b. In conclusion, the standard quantity of coloring agent did not provide significantly more intense bleaching than when it was completely absent. The use of double and triple the amount provided greater bleaching than that observed for the gel without coloring agent. No significant differences were observed between the tested gels.

Evaluation of maturity levels in the management of product development: case studies in the capital goods industry

In recent approaches to the management of product development process (PDP), maturity levels have attracted the attention of practitioners and researchers. The CMMI model contributes to evaluate the maturity levels and improvement of the product development process management. This paper, based on CMMI model, analyzes the practices adopted in two companies of the capital goods industry, which develop and manufacture equipment upon request. It was observed that on account of market conditioning factors and different practices adapted to PDP management, these companies are at different maturity levels. One company is at the initial level of maturity while the other at the most advanced one. It was also noted that the application of CMMI model can provide improvement to PDP management, as well as present guidelines to achieve higher maturity levels, adequate to companies' needs.

Employment Effects of Product and Labour Market Reforms: Are There Synergies?

This article investigates the effect of product market liberalisation on employment allowing for interactions between policies and institutions in product and labour markets. Using panel data for OECD countries over the period 19802002, we present evidence that product market deregulation is more effective at the margin when labour market regulation is high. The data also suggest that product market liberalisation may promote employment-enhancing labour market reforms.

Quality and quantity of milk produced by Saanen goats submitted to stress during three sequential days

The experiment aimed to study the effect of physiological stress on cortisol levels, quality and quantity of milk through punctual administration of ACTH. Twelve Saanen goats were divided in two experimental groups: ACTH group (0,5 mu g of ACTH/Kg.L.W); Placebo group (placebo solution). Milk production, and percentages of protein, fat, lactose and SCC (somatic cells counting) of the milk were analyzed before, during and after the administration of ACTH/placebo. Simultaneously to the ACTH/placebo administration and during three sequential days, blood was collected to evaluate cortisol concentrations. At times -30 and zero, both groups presented basal concentrations of cortisol. The increase of cortisol contents was significant at times 60 (group ACTH: 59.00 +/- 5.70 and groups placebo: 5.23 +/- 1.37ng/mL) and 120 (group ACTH: 47.96 +/- 9.72 and group placebo: 4.38 +/- 1,14ng/mL) since the cortisol content was higher on the ACTH group. The values returned to the basal level at 300 minutes. Concerning milk production, no differences were found between ACTH and placebo groups. Milk, protein, fat, lactose and SCC did not distinguish one group from another. The results indicated that the physiological stress induced during three days was not harmful to milk production and milk quality of Saanen goats.

The effect of adding features on product attractiveness: the role of product perceived congruity

Technological progress has been enabling companies to add disparate features to their existing products. This research investigates the effect of adding more features on consumers’ evaluation of the product, by examining in particular the role of the congruity of the features added with the base product as a variable the moderates the effect of increasing the number of features. Grounding on schema-congruity theory, I propose that the cognitive elaboration associated with the product congruity of the features added explains consumers’ evaluation as the number of new features increases. In particular, it is shown that consumers perceive a benefit from increasing the number of features only when these features are congruent with the product. The underlying mechanisms that explains this finding predicts that when the number of incongruent features increases the cognitive resources necessary to elaborate such incongruities increase and consumers are not willing to spend such resources. However, I further show that when encouraged to consider the new features thoughtfully, consumers do seem able to infer value from increasing the number of moderately incongruent features. Nonetheless, this finding does not apply for those new features that are extremely incongruent with the product. Further evidence for consumers’ ability to resolve the moderate incongruity associated with adding more features is also shown, by studying the moderating role of temporal construal. I propose that consumers perceive an increase in product evaluation as the number of moderately incongruent features increases when consumers consider purchasing the product in the distant future, whereas such an increase is not predicted for the near future scenario. I verify these effect in three experimental studies. Theoretical and managerial implications, and possible avenues of future research are also suggested.

Brand formative design - development and assessment of product design from a future, brand and consumer perspective

With this dissertation research we investigate intersections between design and marketing and in this respect, which factors do contribute that a product design becomes brand formative. We have developed a Brand Formative Design (BFD) framework, which investigates individual design features in a holistic, comparable, brand relevant, and consumer specific context. We discuss what kinds of characteristics contribute to BFD but also illuminate how they should be applied and examine: rnA holistic framework leading to Brand Formative Design. Identification and assessment of BFD Drivers. The dissection of products into three Distinctive Design Levels. The detection of surprising design preferences. The appropriate degree of scheme deviation with evolutionary design. Simulated BFD development processes with three different products and the integration of consumers. Future oriented objectification, comparability and assessment of design. Recommendations for the management of design in a brand specific context. Design is a product feature, which contributes significantly to the success of products. However, the development of new design contains challenges. Design can hardly be objectified; many people have an opinion concerning the attractiveness of new products but cannot formulate their future preferences. Product design is widely developed based on intuition, which can be difficult for the management of design. Here the concept of Brand Formative Design can provide a framework which contributes to structure, objectify, develop and assess new evolutionary design in brand and future relevant contexts, but also integrates consumers and their preferences without restricting creativity too much.

Quality and quantity of bone following alveolar distraction osteogenesis in the human mandible

PURPOSE: The purpose of this prospective study on humans were to evaluate (a) the clinical outcome of alveolar distraction osteogenesis for the correction of vertically deficient edentulous mandibular ridges, (b) the clinical outcome of dental implants placed in the distracted areas, and (c) the quality and quantity of the bone that had formed in the distraction gap. MATERIAL AND METHODS: Seven patients presenting vertically deficient edentulous ridges were treated by means of distraction osteogenesis with an intraoral alveolar distractor. Approximately 3 months after consolidation of the distracted segments, 20 ITI solid screw SLA implants were placed in the distracted areas. Three to 4 months later, abutments were connected and prosthetic loading of the implants started. During implant site preparation, bone biopsies were taken at the implant sites with trephine burrs for histologic and histometric analyses. RESULTS: The mean follow-up after the initial prosthetic loading was 18 months (range 12-24 months). The mean bone gain obtained at the end of distraction was 7 mm (range 5-9 mm). The cumulative success rate of implants 2 years after the onset of prosthetic loading was 95%, whereas the survival rate of implants was 100%. The newly formed bone consisted of woven bone reinforced by parallel-fibered bone with bone marrow spaces between the bone trabeculae. The bone area fraction in the distraction region ranged from 21.6% to 57.8% (38.5+/-11.7%). DISCUSSION AND CONCLUSIONS: Results from this study showed that (a) distraction osteogenesis is a reliable technique for the correction of vertically deficient edentulous ridges, (b) the regenerated bone withstood the functional demands of implant loading, (c) survival and success rates of implants placed in the distracted areas were consistent with those of implants placed in native bone, and (d) there is sufficient bone volume and maturity in the distracted region for primary stability of the implant.

Impact of product-related environmental regulations / voluntary requirements on Thai firms

The rules governing the trade of goods in global markets have shifted toward non-tariff measures related to environmental and chemical safety. Unlike traditional environmental/safety requirements, the scope of modern regulations covers products’ environmental performance and chemical safety. To comply with these modern regulations, production practices along the entire supply chain must be realigned to manage certain chemical substances incorporated into the final product. This paper examines the implications of product-related environmental and chemical safety regulations on different firms operating in Thailand.

Impact of product-related environmental regulations in Asia : descriptive statistics from a survey of firms in Penang, Malaysia

This paper summarizes the main results of a unique firm survey conducted in Penang, Malaysia in 2012 on product-related environmental regulations. The results show that firms receiving foreign-direct investment have adapted well to regulations but faced more rejections. Several research questions are addressed and examined by using the survey data. Major findings are as follows. First, adaptation involves changes in input procurement and market diversification, which potentially changes the structure of supply chains. Second, belonging to global supply chains is a key factor in compliance, but this requires firms to meet tougher customer requirements. Third, there is much room for government policy to play a role in assisting firms.

Impact of product-related environmental regulations in Asia : descriptive statistics from a survey of firms in Vietnam

This paper summarizes the main results of a unique firm survey conducted in Vietnam in 2011 on product-related environmental regulations (PRERs). The results of this survey are compared with the results of a corresponding survey of firms in Penang, Malaysia (Michida, et al. 2014b). The major findings are as follows. First, adaptation to PRERs involves changes in input procurement and results in market diversification, which potentially alters the structure of supply chains. This finding is consistent with the Malaysian survey result. Second, connections to global supply chains are key to compliance, but this requires firms to meet more stringent customer requirements. Third, government policy can play an important role in assisting firms to comply with PRERs.