Project management: evaluation of the problems in the portuguese construction industry

During recent decades it has been possible to identify several problems in construction industry project management, related with to systematic failures in terms of fulfilling its schedule, cost and quality targets, which highlight a need for an evaluation of the factors that may cause these failures. Therefore, it is important to understand how project managers plan the projects, so that the performance and the results can be improved. However, it is important to understand if other areas beyond cost and time management that are mentioned on several studies as the most critical areas, receive the necessary attention from construction project managers. Despite the cost and time are the most sensitive areas/fields, there are several other factors that may lead to project failure. This study aims at understand the reasons that may cause the deviation in terms of cost, time and quality, from the project management point of view, looking at the knowledge areas mentioned by PMI (Project Management Institute).

Managing hypertension in high-risk patients: lessons and promises from the STRATHE and ADVANCE trials.

Pharmacological treatment of hypertension represents a cost-effective way of preventing cardiovascular and renal complications. To benefit maximally from antihypertensive treatment, blood pressure should be brought to below 140/90 mmHg in every hypertensive patient, and even lower (< 130/80 mmHg) if diabetes or renal disease co-exists. Such targets cannot usually be reached using monotherapies. This is especially true in patients who present with a high cardiovascular risk. The co-administration of two agents acting by different mechanisms considerably increases the blood pressure control rate. Such combinations are not only efficacious, but are also well tolerated, and some fixed low-dose combinations even have a placebo-like tolerability. This is the case for the preparation containing the angiotensin-converting enzyme inhibitor perindopril (2 mg) and the diuretic indapamide (0.625 mg), a fixed low-dose combination that has been shown in controlled trials to be more effective than monotherapies in reducing albuminuria, regressing cardiac hypertrophy and improving the stiffness of large arteries. Using this combination to initiate antihypertensive therapy has been shown in a double-blind trial (Strategies of Treatment in Hypertension: Evaluation; STRATHE) to normalize blood pressure (< 140/90 mmHg) in significantly more patients (62%) than a sequential monotherapy approach based on atenolol, losartan and amlodipine (49%) and a stepped-care strategy based on valsartan and hydrochlorothiazide (47%), with no difference between the three arm groups in terms of tolerability. An ongoing randomized trial (Action in Diabetes and Vascular Disease: Preterax and Diamicron Modified Release Controlled Evaluation; ADVANCE) is a study with a 2 x 2 factorial design assessing the effects of the fixed-dose perindopril-indapamide combination and of the intensive gliclazide modified release-based glucose control regimen in type 2 diabetic patients, with or without hypertension. A total of 11 140 patients were randomly selected. Within the first 6 weeks of treatment (run-in phase), the perindopril-indapamide combination lowered blood pressure from 145/81 +/- 22/11 mmHg (mean +/- SD) to 137/78 +/- 20/10 mmHg. Fixed-dose combinations are becoming more and more popular for the management of hypertension, and are even proposed by hypertension guidelines as a first-line option to treat hypertensive patients.

Discounting Spotted Apples: Investigating Consumers’ Willingness to Accept Cosmetic Damage in an Organic Product, November 2006

Organic producers have limited methods of avoiding plant diseases that result in cosmetic damage to produce. Therefore, the appearance of organic produce is often less than perfect. We use an experimental auction to investigate how cosmetic damage affects consumers’ willingness to pay for organic apples. We find that 75% of the participants are willing to pay more for organic than for conventional apples given identical appearance. However, at the first sight of any imperfection in the appearance of the organic apples, this segment is significantly reduced. Furthermore, we find that there is a significant effect of interaction between cosmetic damage and product methods. Even though most consumers say they buy organic products to avoid pesticides, we find that cosmetic damage has a larger impact on the willingness to pay for organic apples than for conventional apples.

Three essays in control, entrepreneurship and innovation

One of the key emphases of these three essays is to provide practical managerial insight. However, good practical insight, can only be created by grounding it firmly on theoretical and empirical research. Practical experience-based understanding without theoretical grounding remains tacit and cannot be easily disseminated. Theoretical understanding without links to real life remains sterile. My studies aim to increase the understanding of how radical innovation could be generated at large established firms and how it can have an impact on business performance as most businesses pursue innovation with one prime objective: value creation. My studies focus on large established firms with sales revenue exceeding USD $ 1 billion. Usually large established firms cannot rely on informal ways of management, as these firms tend to be multinational businesses operating with subsidiaries, offices, or production facilities in more than one country. I. Internal and External Determinants of Corporate Venture Capital Investment The goal of this chapter is to focus on CVC as one of the mechanisms available for established firms to source new ideas that can be exploited. We explore the internal and external determinants under which established firms engage in CVC to source new knowledge through investment in startups. We attempt to make scholars and managers aware of the forces that influence CVC activity by providing findings and insights to facilitate the strategic management of CVC. There are research opportunities to further understand the CVC phenomenon. Why do companies engage in CVC? What motivates them to continue "playing the game" and keep their active CVC investment status. The study examines CVC investment activity, and the importance of understanding the influential factors that make a firm decide to engage in CVC. The main question is: How do established firms' CVC programs adapt to changing internal conditions and external environments. Adaptation typically involves learning from exploratory endeavors, which enable companies to transform the ways they compete (Guth & Ginsberg, 1990). Our study extends the current stream of research on CVC. It aims to contribute to the literature by providing an extensive comparison of internal and external determinants leading to CVC investment activity. To our knowledge, this is the first study to examine the influence of internal and external determinants on CVC activity throughout specific expansion and contraction periods determined by structural breaks occurring between 1985 to 2008. Our econometric analysis indicates a strong and significant positive association between CVC activity and R&D, cash flow availability and environmental financial market conditions, as well as a significant negative association between sales growth and the decision to engage into CVC. The analysis of this study reveals that CVC investment is highly volatile, as demonstrated by dramatic fluctuations in CVC investment activity over the past decades. When analyzing the overall cyclical CVC period from 1985 to 2008 the results of our study suggest that CVC activity has a pattern influenced by financial factors such as the level of R&D, free cash flow, lack of sales growth, and external conditions of the economy, with the NASDAQ price index as the most significant variable influencing CVC during this period. II. Contribution of CVC and its Interaction with R&D to Value Creation The second essay takes into account the demands of corporate executives and shareholders regarding business performance and value creation justifications for investments in innovation. Billions of dollars are invested in CVC and R&D. However there is little evidence that CVC and its interaction with R&D create value. Firms operating in dynamic business sectors seek to innovate to create the value demanded by changing market conditions, consumer preferences, and competitive offerings. Consequently, firms operating in such business sectors put a premium on finding new, sustainable and competitive value propositions. CVC and R&D can help them in this challenge. Dushnitsky and Lenox (2006) presented evidence that CVC investment is associated with value creation. However, studies have shown that the most innovative firms do not necessarily benefit from innovation. For instance Oyon (2007) indicated that between 1995 and 2005 the most innovative automotive companies did not obtain adequate rewards for shareholders. The interaction between CVC and R&D has generated much debate in the CVC literature. Some researchers see them as substitutes suggesting that firms have to choose between CVC and R&D (Hellmann, 2002), while others expect them to be complementary (Chesbrough & Tucci, 2004). This study explores the interaction that CVC and R&D have on value creation. This essay examines the impact of CVC and R&D on value creation over sixteen years across six business sectors and different geographical regions. Our findings suggest that the effect of CVC and its interaction with R&D on value creation is positive and significant. In dynamic business sectors technologies rapidly relinquish obsolete, consequently firms operating in such business sectors need to continuously develop new sources of value creation (Eisenhardt & Martin, 2000; Qualls, Olshavsky, & Michaels, 1981). We conclude that in order to impact value creation, firms operating in business sectors such as Engineering & Business Services, and Information Communication & Technology ought to consider CVC as a vital element of their innovation strategy. Moreover, regarding the CVC and R&D interaction effect, our findings suggest that R&D and CVC are complementary to value creation hence firms in certain business sectors can be better off supporting both R&D and CVC simultaneously to increase the probability of generating value creation. III. MCS and Organizational Structures for Radical Innovation Incremental innovation is necessary for continuous improvement but it does not provide a sustainable permanent source of competitiveness (Cooper, 2003). On the other hand, radical innovation pursuing new technologies and new market frontiers can generate new platforms for growth providing firms with competitive advantages and high economic margin rents (Duchesneau et al., 1979; Markides & Geroski, 2005; O'Connor & DeMartino, 2006; Utterback, 1994). Interestingly, not all companies distinguish between incremental and radical innovation, and more importantly firms that manage innovation through a one-sizefits- all process can almost guarantee a sub-optimization of certain systems and resources (Davila et al., 2006). Moreover, we conducted research on the utilization of MCS along with radical innovation and flexible organizational structures as these have been associated with firm growth (Cooper, 2003; Davila & Foster, 2005, 2007; Markides & Geroski, 2005; O'Connor & DeMartino, 2006). Davila et al. (2009) identified research opportunities for innovation management and provided a list of pending issues: How do companies manage the process of radical and incremental innovation? What are the performance measures companies use to manage radical ideas and how do they select them? The fundamental objective of this paper is to address the following research question: What are the processes, MCS, and organizational structures for generating radical innovation? Moreover, in recent years, research on innovation management has been conducted mainly at either the firm level (Birkinshaw, Hamel, & Mol, 2008a) or at the project level examining appropriate management techniques associated with high levels of uncertainty (Burgelman & Sayles, 1988; Dougherty & Heller, 1994; Jelinek & Schoonhoven, 1993; Kanter, North, Bernstein, & Williamson, 1990; Leifer et al., 2000). Therefore, we embarked on a novel process-related research framework to observe the process stages, MCS, and organizational structures that can generate radical innovation. This article is based on a case study at Alcan Engineered Products, a division of a multinational company provider of lightweight material solutions. Our observations suggest that incremental and radical innovation should be managed through different processes, MCS and organizational structures that ought to be activated and adapted contingent to the type of innovation that is being pursued (i.e. incremental or radical innovation). More importantly, we conclude that radical can be generated in a systematic way through enablers such as processes, MCS, and organizational structures. This is in line with the findings of Jelinek and Schoonhoven (1993) and Davila et al. (2006; 2007) who show that innovative firms have institutionalized mechanisms, arguing that radical innovation cannot occur in an organic environment where flexibility and consensus are the main managerial mechanisms. They rather argue that radical innovation requires a clear organizational structure and formal MCS.

Managing Technologies in Research Organization: Framework for Research Surplus Portfolio

Avoimesta innovaatiosta ja innovaatioiden tehokkaasta hyödyntämisestä on tulossa tärkeitä osia yritysten T&K-prosesseihin. Diplomityön tarkoituksena on luoda viitekehys teknologioiden, jotka eivät kuulu yrityksen ydinliiketoimintaan, tehokkaampaan hallinnointiin tutkimusorganisaatiossa. Konstruktiivinen viitekehys on rakennettu pohjautuen aineettomien pääomien johtamisen ja portfolion hallinnoinnin teorioihin. Lisäksi työssä määritellään työkaluja jatekniikoita ylijäämäteknologioiden arviointiin. Uutta ylijäämäteknologioiden portfoliota voidaan hyödyntää hakukoneena, ideapankkina, kommunikaatiotyökaluna tai teknologioiden markkinapaikkana. Sen johtaminen koostuu tietojen dokumentoinnista järjestelmään, teknologioiden arvioinnista ja portfolion päivityksestä ja ylläpidosta.

Enterprise Portal as a Knowledge Management Tool in a Global Forest Products Company

Tietojohtaminen on osoittautunut nykypäivänä organisaatioiden yhdeksi suurimmaksi haasteeksi. Haasteena ei vain ole se tiedon määrä mitä tulisi hallita, vaan pikemminkin tiedonhallinta toimii yritykselle kilpailuetuna globaalissa yritysmaailmassa. Tämän työn tavoitteena on tutkia yritysportaalin soveltuvuutta tiedonhallintaan globaalissa metsäteollisuusyrityksessä. Lisäksi tavoitteena on selvittää portaalin sovittamista kullekin käyttäjäryhmälle case yrityksessä. Työn teoriaosassa on käsitelty tiedonhallinnan monimuotoisuutta ja vaikeutta kuvata sitä yksiselitteisesti. Lisäksi käyttäjäryhmien ja käyttäjäprofiilien määrittämiseen vaikuttavia seikkoja on selvitetty tässä osassa. Empiirinen osa käsittelee case-yritystä ja sen suhdetta tiedonhallintaan sekä tämän kaltaisen tiedonhallinnan työvälineen käyttöön. Työstä saatujen tulosten perusteella voidaan todeta yritysportaalin soveltuvan hyvin tiedonhallintaan monimutkaisessakin yrityksessä. Portaali muuttaa yrityksen liiketoimintaprosesseja läpinäkyvämmiksi, kun bisneskriittistä tietoa tarjotaan yhdessä paikassa.

The use of mini-projects in an undergraduate laboratory course in chemistry

This paper reports the results of a three-year study of the effectiveness of mini-projects in a first year laboratory course in chemistry at a Scottish university. A mini-project is a short, practical problem which requires for its solution the application of the knowledge and skills developed in previously completed set experiments. A number of recommendations have been made about the most appropriate ways of introducing mini-projects into undergraduate laboratory course. The main hypothesis of this survey was concerned with the value of mini-projects in laboratory courses formulated within the context of Information Processing Theory.

Factors of customer project profitability in an engineering industrial enterprise

The purpose of the study is to find factors affecting projects' profitability in project business. The issue is approached from customer profitability and project management point of view. The study has been made for a big Finnish company acting in a global market place. The research method is quantitative. Research hypotheses are based on the literature. The used database is originated from the company's ERP- (enterprise resource planning) and project financial follow-up —system. The findings of the study supported the hypotheses weakly. Obviously profitability fluctuated depending on a customer and a project manager. The reasons could not be justified with the variables used in the research.

Managing regulatory risks when outsourcing network-related services in the electricity distribution sector

Deregulation of the electricity sector liberated the electricity sale and production for competitive forces while in the network business, electricity transmission and distribution, natural monopoly positions were recognised. Deregulation was accompanied by efficiencyoriented thinking on the whole electricity supply industry. For electricity distribution this meant a transition from a public service towards profit-driven business guided by economic regulation. Regulation is the primary means to enforce societal and other goals in the regulated monopoly sector. The design of economic regulation is concerned with two main attributes; end-customer price and quality of electricity distribution services. Regulation limits the costs of the regulated company but also defines the desired quality of monopoly services. The characteristics of the regulatory framework and the incentives it provides are therefore decisive for the electricity distribution sector. Regulation is not a static factor; changes in the regulatory practices cause discontinuity points, which in turn generate risks. A variety of social and environmental concerns together with technological advancements have emphasised the relevance of quality regulation, which is expected to lead to the large-scale replacement of overhead lines with underground cables. The electricity network construction activity is therefore currently witnessing revolutionary changes in its competitive landscape. In a business characterised by high statutory involvement and a high level of sunk costs, recognising and understanding the regulatory risks becomes a key success factor. As a response, electricity distribution companies have turned into outsourcing to attain efficiency and quality goals. This doctoral thesis addresses the impacts of regulatory risks on electricity network construction, which is a commonly outsourced activity in the electricity distribution network sector. The chosen research approach is characterised as an action analytical research on account of the fact that regulatory risks are greatly dependent on the individual nature of the regulatory regime applied in the electricity distribution sector. The main contribution of this doctoral thesis is to develop a concept for recognising and managing the business risks stemming from economic regulation. The degree of outsourcing in the sector is expected to increase in years to come. The results of the research provide new knowledge to manage the regulatory risks when outsourcing services.

Knowledge Sharing between Generations in an Organisation - Retention of the Old or Building the New?

The study explores knowledge transfer between retiring employees and their successors in expert work. My aim is to ascertain whether there is knowledge development or building new knowledge related to this organisational knowledge transfer between generations; in other words, is the transfer of knowledge from experienced, retiring employees to their successors merely retention of the existing organisational knowledge by distributing it from one individual to another or does this transfer lead to building new and meaningful organisational knowledge. I call knowledge transfer between generations and the possibly related knowledge building in this study knowledge sharing between generations. The study examines the organisation and knowledge management from a knowledge-based and constructionist view. From this standpoint, I see knowledge transfer as an interactive process, and the exploration is based on how the people involved in this process understand and experience the phenomenon studied. The research method is organisational ethnography. I conducted the analysis of data using thematic analysis and the articulation method, which has not been used before in organisational knowledge studies. The primary empirical data consists of theme interviews with twelve employees involved in knowledge transfer in the organisation being studied and five follow-up theme interviews. Six of the interviewees are expert duty employees due to retire shortly, and six are their successors. All those participating in the follow-up interviews are successors of those soon to retire from their expert responsibilities. The organisation in the study is a medium-sized Finnish firm, which designs and manufactures electrical equipment and systems for the global market. The results of the study show that expert work-related knowledge transfer between generations can mean knowledge building which produces new, meaningful knowledge for the organisation. This knowledge is distributed in the organisation to all those that find it useful in increasing the efficiency and competitiveness of the whole organisation. The transfer and building of knowledge together create an act of knowledge sharing between generations where the building of knowledge presupposes transfer. Knowledge sharing proceeds between the expert and the novice through eight phases. During the phases of knowledge transfer the expert guides the novice to absorb the knowledge to be transferred. With the expert’s help the novice gradually comes to understand the knowledge and in the end he or she is capable of using it in his or her work. During the phases of knowledge building the expert helps the novice to further develop the knowledge being transferred so that it becomes new, useful knowledge for the organisation. After that the novice takes the built knowledge to use in his or her work. Based on the results of the study, knowledge sharing between generations takes place in interaction and ends when knowledge is taken to use. The results I obtained in the interviews by the articulation method show that knowledge sharing between generations is shaped by the novices’ conceptions of their own work goals, knowledge needs and duties. These are not only based on the official definition of the work, but also how the novices find their work or how they prioritise the given objectives and responsibilities. The study shows that the novices see their work primarily as maintenance or development. Those primarily involved in maintenance duties do not necessarily need knowledge defined as transferred between generations. Therefore, they do not necessarily transfer knowledge with their assigned experts, even though this can happen in favourable circumstances. They do not build knowledge because their view of their work goals and duties does not require the building of new knowledge. Those primarily involved in development duties, however, do need knowledge available from their assigned experts. Therefore, regardless of circumstances they transfer knowledge with their assigned experts and also build knowledge because their work goals and duties create a basis for building new knowledge. The literature on knowledge transfer between generations has focused on describing either the knowledge being transferred or the means by which it is transferred. Based on the results of this study, however, knowledge sharing between generations, that is, transfer and building is determined by how the novice considers his or her own knowledge needs and work practices. This is why studies on knowledge sharing between generations and its implementation should be based not only on the knowledge content and how it is shared, but also on the context of the work in which the novice interprets and shares knowledge. The existing literature has not considered the possibility that knowledge transfer between generations may mean building knowledge. The results of this study, however, show that this is possible. In knowledge building, the expert’s existing organisational knowledge is combined with the new knowledge that the novice brings to the organisation. In their interaction this combination of the expert’s “old” and the novice’s “new” knowledge becomes new, meaningful organisational knowledge. Previous studies show that knowledge development between the members of an organisation is the prerequisite for organisational renewal which in turn is essential for improved competitiveness. Against this background, knowledge building enables organisational renewal and thus enhances competitiveness. Hence, when knowledge transfer between generations is followed by knowledge building, the organisation kills two birds with one stone. In knowledge transfer the organisation retains the existing knowledge and thus maintains its competitiveness. In knowledge building the organisation developsnew knowledge and thus improves its competitiveness.

Developing the measurement and management of knowledge: applying the constructive research approach in a knowledge intensive service environment

Intellectual assets have attained continuous attention in the academic field, as they are vital sources of competitive advantage and organizational performance in the contemporary knowledge intensive business environment. Intellectual capital measurement is quite thoroughly addressed in the accounting literature. However, the purpose of the measurement is to support the management of intellectual assets, but the reciprocal relationship between measurement and management has not been comprehensively considered in the literature. The theoretical motivation for this study rose from this paradox, as in order to maximise the effectiveness of knowledge management the two initiatives need to be closely integrated. The research approach of this interventionist case study is constructive. The objective is to develop the case organization’s knowledge management and intellectual capital measurement in a way that they would be closely integrated and the measurement would support the management of intellectual assets. The case analysis provides valuable practical considerations about the integration and related issues as the case company is a knowledge intensive organization in which the know-how of the employees is the central competitive asset and therefore, the management and measurement of knowledge are essential for its future success. The results suggest that the case organization is confronting challenges in managing knowledge. In order to appropriately manage knowledge processes and control the related risks, support from intellectual capital measurement is required. However, challenges in measuring intellectual capital, especially knowledge, could be recognized in the organization. By reflecting the knowledge management situation and the constructed strategy map, a new intellectual measurement system was developed for the case organization. The construction of the system as well as its indicators can be perceived to contribute to the literature, emphasizing of the importance of properly considering the organization’s knowledge situation in developing an intellectual capital measurement system.

Lectio praecursoria : Systems between information and knowledge : in a memory management model of an extended enterprise

VTT Jouni Meriluodon valtio-opin alaan kuuluva väitöskirja Systems between information and knowledge : in a memory management model of an extended enterprise tarkastettiin 21.6.2011 Helsingin yliopistossa.

A crisis of social democracy : organized labour and the NDP in an era of neoliberalism

The NDP was founded out of the ashes of the Co-Operative Commonwealth Federation to cooperate with the Canadian Labour Congress to become the 'political arm of organized labour' in Canada. The NDP has long claimed they are the party which represents the policy goals of organized labour in Canada: that the NDP alone will fight for trade union rights, and will fight for Canadian workers. Divergent Paths is an examination of the links between the labour movement and the ND P in an era ofneo-liberalism. Provincial NDP governments have become increasingly neoliberal in their ideological orientation, and have often proved to be no friend to the labour movement when they hold office. The Federal party has never held power, nor have they ever formed the Official Opposition. This thesis charts the progress of the federal NDP as they become more neoliberal from 1988 to 2006, and shows how this trend effects the links between the NDP and labour. Divergent Paths studies each federal election from 1988 to 2006, looking at the interactions between Labour and the NDP during these elections. Elections provide critical junctions to study discourse - party platforms, speeches, and other official documents can be used to examine discourse. Extensive newspaper searches were used to follow campaign events and policy speeches. Studying the party's discourse can be used to determine the ideological orientation of the party itself: the fact that the party's discourse has become neoliberal is a sure sign that the party itself is neoliberal. The NDP continues to drive towards the centre of the political spectrum in an attempt to gain multi-class support. The NDP seems more interested in gaining seats at any cost, rather then promoting the agenda of Labour. As the party attempts to open up to more multi-class support, Labour becomes increasingly marginalised in the party. A rift which arguably started well before the 1988 election was exacerbated during that election; labour encouraged the NDP to campaign solely on the issue of Free Trade, and the NDP did not. The 1993 election saw the rift between the two grow even further as the Federal NDP suffered major blowbacks from the actions of the Ontario NDP. The 1997 and 2000 elections saw the NDP make a deliberate move to the centre of the political spectrum which increasingly marginalised labour. In the 2004 election, Jack Layton made no attempt to move the party back to the left; and in 2006 the link between labour and the NDP was perhaps irreparably damaged when the CAW endorsed the Liberal party in a strategic voting strategy, and the CLC did not endorse the NDP. The NDP is no longer a reliable ally of organized labour. The Canadian labour movement must decide wether the NDP can be 'salvaged' or if the labour movement should end their alliance with the NDP and engage in a new political project.

A Foucauldian Analysis of Power and Representation in an Attempt to Run a Photovoice Project with Youth

This project evolved out of a search for ways to conduct research on “others” in a way that does not exploit, stigmatize or misrepresent their experience. This thesis is an ethnographic study in leisure research and youth work and an experiment in running a photovoice project. Photovoice is a participatory visual method that embodies the emancipatory ideal of empowering others through self-representation. The literature on photovoice lacks a comprehensive discussion on the complexity of power and representation. Postmodern theorists have proposed that participatory methods are not benign and that initiatives are acts of power in themselves that produce effects (Cook & Kothari, 2001). A Foucauldian analysis of power is used to deconstruct the researcher’s practice and reflect on why and how youth are “engaged”. This project seeks to embrace the principle of working “with” others, but also work from a postmodern perspective that acknowledges power and representation as ongoing problems.