Contribución a la selección de cadenas de procesos de fabricación

During the design phase, it creates and transforms ideas into products. It needs to know the manufacturing aspects for ensuring success and calculating the product cost while developing of designs. However, the choice one or another way of manufacturing, it will get slightly different results to the proposed design. The design teams require knowing some manufacturing alternatives for evaluate. This thesis has been proposed a select manufacturing process chain tool. The system modeled the design and manufacturing process data by select attributes and the process relationship. Moreover, the system uses “transformation concept” that represents the capability of each manufacturing process to modify a determinate design attribute. Finally, the system is developed as algorithm and build as part of a CAD platform.

Energy saving in intelligent buildings - via energy harvesting in wireless sensor networks

Wireless sensor networks (WSNs) have been widely used in pervasive systems such as intelligent buildings. As a vital factor of product cost, energy consuming in WSN has been focused upon, but only via energy harvesting can the problem be overcome radically. This article presents a new approach to harvesting electromagnetic energy for WSN from useless radio frequency (RF) signals transmitted in WSN, with a quantitative analysis showing its feasibility.

The macroeconomic effects of infrequent information with adjustment costs

We extend the macroeconomic literature on Sstype rules by introducing infrequent information in a kinked ad justment cost model. We first show that optimal individual decision rules are both state-and -time dependent. We then develop an aggregation framework to study the macroeconomic implications of such optimal individual decision rules. In our model, a vast number of agents act together, and more so when uncertainty is large.The average effect of an aggregate shock is inversely related to its size and to aggregate uncertainty. These results are in contrast with those obtained with full information ad justment cost models.

Economic-statistical design of the (X)over-bar chart used to control a wandering process mean using genetic algorithm

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Dos requisitos à arquitetura em linhas de produtos de software: uma estratégia de transformações entre modelos

The tracking between models of the requirements and architecture activities is a strategy that aims to prevent loss of information, reducing the gap between these two initial activities of the software life cycle. In the context of Software Product Lines (SPL), it is important to have this support, which allows the correspondence between this two activities, with management of variability. In order to address this issue, this paper presents a process of bidirectional mapping, defining transformation rules between elements of a goaloriented requirements model (described in PL-AOVgraph) and elements of an architectural description (defined in PL-AspectualACME). These mapping rules are evaluated using a case study: the GingaForAll LPS. To automate this transformation, we developed the MaRiPLA tool (Mapping Requirements to Product Line Architecture), through MDD techniques (Modeldriven Development), including Atlas Transformation Language (ATL) with specification of Ecore metamodels jointly with Xtext , a DSL definition framework, and Acceleo, a code generation tool, in Eclipse environment. Finally, the generated models are evaluated based on quality attributes such as variability, derivability, reusability, correctness, traceability, completeness, evolvability and maintainability, extracted from the CAFÉ Quality Model

Joint conomic design of (x)over-bar and R charts under Weibull shock models

This paper deals with the joint economic design of (x) over bar and R charts when the occurrence times of assignable causes follow Weibull distributions with increasing failure rates. The variable quality characteristic is assumed to be normally distributed and the process is subject to two independent assignable causes (such as tool wear-out, overheating, or vibration). One cause changes the process mean and the other changes the process variance. However, the occurrence of one kind of assignable cause does not preclude the occurrence of the other. A cost model is developed and a non-uniform sampling interval scheme is adopted. A two-step search procedure is employed to determine the optimum design parameters. Finally, a sensitivity analysis of the model is conducted, and the cost savings associated with the use of non-uniform sampling intervals instead of constant sampling intervals are evaluated.

Economic design of (X)over-bar charts with variable parameters: the Markov chain approach

This paper presents an economic design of (X) over bar control charts with variable sample sizes, variable sampling intervals, and variable control limits. The sample size n, the sampling interval h, and the control limit coefficient k vary between minimum and maximum values, tightening or relaxing the control. The control is relaxed when an (X) over bar value falls close to the target and is tightened when an (X) over bar value falls far from the target. A cost model is constructed that involves the cost of false alarms, the cost of finding and eliminating the assignable cause, the cost associated with production in an out-of-control state, and the cost of sampling and testing. The assumption of an exponential distribution to describe the length of time the process remains in control allows the application of the Markov chain approach for developing the cost function. A comprehensive study is performed to examine the economic advantages of varying the (X) over bar chart parameters.

Joint conomic design of x̄ and R charts under Weibull shock models

This paper deals with the joint economic design of x̄ and R charts when the occurrence times of assignable causes follow Weibull distributions with increasing failure rates. The variable quality characteristic is assumed to be normally distributed and the process is subject to two independent assignable causes (such as tool wear-out, overheating, or vibration). One cause changes the process mean and the other changes the process variance. However, the occurrence of one kind of assignable cause does not preclude the occurrence of the other. A cost model is developed and a non-uniform sampling interval scheme is adopted. A two-step search procedure is employed to determine the optimum design parameters. Finally, a sensitivity analysis of the model is conducted, and the cost savings associated with the use of non-uniform sampling intervals instead of constant sampling intervals are evaluated.

Thermal properties of passion fruit juice as affected by temperature and water content

The specific heat, thermal conductivity and density of passion fruit juice were experimentally determined from 0.506 to 0.902 (wet basis) water content and temperatures from 0.4 to 68.8C. The experimental results were compared with existing and widely used models for the thermal properties. In addition, based on empiric equations from literature, new simple models were parameterized with a subset of the total experimental data. The specific heat and thermal conductivity showed linear dependency on water content and temperature, while the density was nonlinearly related to water content. The generalized predictive models were considerably good for this product but the empiric, product-specific models developed in the present work yield better predictions. Even though the existing models showed a moderate accuracy, the new simple ones would be preferred, because they constitute an easier and direct way of evaluating the thermal properties of passion fruit juice, requiring no information about the chemical composition of the product, and a reduced time of the estimation procedure, as the new empiric models are described in terms of only two physical parameters, the water content and the temperature. © Copyright 2005, Blackwell Publishing All Rights Reserved.

O impacto da qualificação da mão-de-obra no desempenho comercial do Brasil

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Planejamento econômico de gráficos de controle X para monitoramento de processos autocorrelacionados

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo experimental da remoção, por jato de ar comprimido, de detritos na superfície de corte de rebolo diamantado durante a retificação da alumina refrigerada pela técnica MQL

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estimating outcomes in newborn infants using fuzzy logic

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

High-performance switching architectures for optical networks

The need for high bandwidth, due to the explosion of new multi\-media-oriented IP-based services, as well as increasing broadband access requirements is leading to the need of flexible and highly reconfigurable optical networks. While transmission bandwidth does not represent a limit due to the huge bandwidth provided by optical fibers and Dense Wavelength Division Multiplexing (DWDM) technology, the electronic switching nodes in the core of the network represent the bottleneck in terms of speed and capacity for the overall network. For this reason DWDM technology must be exploited not only for data transport but also for switching operations. In this Ph.D. thesis solutions for photonic packet switches, a flexible alternative with respect to circuit-switched optical networks are proposed. In particular solutions based on devices and components that are expected to mature in the near future are proposed, with the aim to limit the employment of complex components. The work presented here is the result of part of the research activities performed by the Networks Research Group at the Department of Electronics, Computer Science and Systems (DEIS) of the University of Bologna, Italy. In particular, the work on optical packet switching has been carried on within three relevant research projects: the e-Photon/ONe and e-Photon/ONe+ projects, funded by the European Union in the Sixth Framework Programme, and the national project OSATE funded by the Italian Ministry of Education, University and Scientific Research. The rest of the work is organized as follows. Chapter 1 gives a brief introduction to network context and contention resolution in photonic packet switches. Chapter 2 presents different strategies for contention resolution in wavelength domain. Chapter 3 illustrates a possible implementation of one of the schemes proposed in chapter 2. Then, chapter 4 presents multi-fiber switches, which employ jointly wavelength and space domains to solve contention. Chapter 5 shows buffered switches, to solve contention in time domain besides wavelength domain. Finally chapter 6 presents a cost model to compare different switch architectures in terms of cost.

Optimierung der Energieeffizienz von Intralogistikressourcen am Beispiel des Kettenförderers

Dieser Artikel setzt sich mit den Einflussgrößen auf die Energieeffizienz von Intralogistikressourcen am Beispiel des Tragkettenförderers auseinander. Es wird beleuchtet durch welche Methoden der Energiebedarf und -verbrauch ermittelt werden kann und wie Abhängigkeiten und Wechselwirkungen der Einflussgrößen auf den Energieverbrauch bestimmt werden. Aus den Ergebnissen werden Maßnahmen abgeleitet, durch die der Energieverbrauch von Intralogistikressourcen reduziert werden kann. Zudem wird ein Ausblick auf Energieverbrauchserhöhungen durch die zeitliche Veränderung infolge von Verschleißerscheinungen gegeben. Die ermittelten Erkenntnisse bilden die Grundlage für die Erstellung eines Kostenmodells, das die real auftretenden Lebenszykluskosten für Energie und Instandhaltung transparenter als bestehende Kostenmodelle darstellt. Mit dem Modell sollen Energie- und Instandhaltungskosten über den Lebenszyklus verringert werden, indem die Instandhaltungsmaßnahmen aus Gesamtkostensicht optimal geplant werden.