Ubuntu and the Obligation to Obey the Law

Nkiruka, M., Ubuntu and the Obligation to Obey the Law, Cambrian Law Review. Vol. 37. 2006. p. 17 RAE2008

The Limitations of Law in promoting synergy between environment and development policies in developing countries

Journal of Energy and Natural Resources Law, 24(4) pp.574-606 RAE2008

Optimisation of granola breakfast cereal manufacturing process by wet granulation and pneumatic conveying

This study has considered the optimisation of granola breakfast cereal manufacturing processes by wet granulation and pneumatic conveying. Granola is an aggregated food product used as a breakfast cereal and in cereal bars. Processing of granola involves mixing the dry ingredients (typically oats, nuts, etc.) followed by the addition of a binder which can contain honey, water and/or oil. In this work, the design and operation of two parallel wet granulation processes to produce aggregate granola products were incorporated: a) a high shear mixing granulation process followed by drying/toasting in an oven. b) a continuous fluidised bed followed by drying/toasting in an oven. In high shear granulation the influence of process parameters on key granule aggregate quality attributes such as granule size distribution and textural properties of granola were investigated. The experimental results show that the impeller rotational speed is the single most important process parameter which influences granola physical and textural properties. After that binder addition rate and wet massing time also show significant impacts on granule properties. Increasing the impeller speed and wet massing time increases the median granule size while also presenting a positive correlation with density. The combination of high impeller speed and low binder addition rate resulted in granules with the highest levels of hardness and crispness. In the fluidised bed granulation process the effect of nozzle air pressure and binder spray rate on key aggregate quality attributes were studied. The experimental results show that a decrease in nozzle air pressure leads to larger in mean granule size. The combination of lowest nozzle air pressure and lowest binder spray rate results in granules with the highest levels of hardness and crispness. Overall, the high shear granulation process led to larger, denser, less porous and stronger (less likely to break) aggregates than the fluidised bed process. The study also examined the particle breakage of granola during pneumatic conveying produced by both the high shear granulation and the fluidised bed granulation process. Products were pneumatically conveyed in a purpose built conveying rig designed to mimic product conveying and packaging. Three different conveying rig configurations were employed; a straight pipe, a rig consisting two 45° bends and one with 90° bend. Particle breakage increases with applied pressure drop, and a 90° bend pipe results in more attrition for all conveying velocities relative to other pipe geometry. Additionally for the granules produced in the high shear granulator; those produced at the highest impeller speed, while being the largest also have the lowest levels of proportional breakage while smaller granules produced at the lowest impeller speed have the highest levels of breakage. This effect clearly shows the importance of shear history (during granule production) on breakage during subsequent processing. In terms of the fluidised bed granulation, there was no single operating parameter that was deemed to have a significant effect on breakage during subsequent conveying. Finally, a simple power law breakage model based on process input parameters was developed for both manufacturing processes. It was found suitable for predicting the breakage of granola breakfast cereal at various applied air velocities using a number of pipe configurations, taking into account shear histories.

Towards a new model of criminal justice system in the era of globalised criminality: the biggest challenges for criminal process legislation

The main objective of this thesis is the critical analysis of the evolution of the criminal justice systems throughout the past decade, with special attention to the fight against transnational terrorism. It is evident – for any observer - that such threats and the associated risk that terrorism entails, has changed significantly throughout the past decade. This perception has generated answers – many times radical ones – by States, as they have committed themselves to warrant the safety of their populations and to ease a growing sentiment of social panic. This thesis seeks to analyse the characteristics of this new threat and the responses that States have developed in the fight against terrorism since 9/11, which have questioned some of the essential principles and values in place in their own legal systems. In such sense, freedom and security are placed into perspective throughout the analysis of the specific antiterrorist legal reforms of five different States: Israel, Portugal, Spain, the United Kingdom and the United States of America. On the other hand, in light of those antiterrorist reforms, it will be questioned if it is possible to speak of the emergence of a new system of criminal justice (and of a process of a convergence between common law and civil law systems), built upon a control and preventive security framework, significantly different from traditional models. Finally, this research project has the fundamental objective to contribute to a better understanding on the economic, social and civilization costs of those legal reforms regarding human rights, the rule of law and democracy in modern States.

Power-law behaviour, heterogeneity, and trend chasing

Long-range dependence in volatility is one of the most prominent examples in financial market research involving universal power laws. Its characterization has recently spurred attempts to provide some explanations of the underlying mechanism. This paper contributes to this recent line of research by analyzing a simple market fraction asset pricing model with two types of traders---fundamentalists who trade on the price deviation from estimated fundamental value and trend followers whose conditional mean and variance of the trend are updated through a geometric learning process. Our analysis shows that agent heterogeneity, risk-adjusted trend chasing through the geometric learning process, and the interplay of noisy fundamental and demand processes and the underlying deterministic dynamics can be the source of power-law distributed fluctuations. In particular, the noisy demand plays an important role in the generation of insignificant autocorrelations (ACs) on returns, while the significant decaying AC patterns of the absolute returns and squared returns are more influenced by the noisy fundamental process. A statistical analysis based on Monte Carlo simulations is conducted to characterize the decay rate. Realistic estimates of the power-law decay indices and the (FI)GARCH parameters are presented.

'Ulster's policing goes global': The police reform process in Northern Ireland and the creation of a global brand

This paper engages with contemporary discussions in relation to the commodification of policing and security. It suggests that the existing literature regarding these trends has been geared primarily towards commercial security providers and has failed to address the processes by which public policing models are commodified and marketed both within, and through, the transnational policing community. Drawing upon evidence from the police change process in Northern Ireland, we argue that a Northern Irish Policing Model (NIPM) has emerged in the aftermath of the Independent Commission on Policing (ICP) reforms. This is increasingly branded and promoted on the global stage. Furthermore, we suggest that the NIPM is not monolithic, but segmented, and targeted towards a number of different 'consumers' both domestically and transnationally. Reflecting these diverse markets, the NIPM draws upon two seemingly incongruous constituent elements: the 'best practice' lessons of policing transition, as embodied in the ICP reforms; and, the legacy of counter-terrorism expertise drawn from the preceding decades of conflict. The discussion concludes by querying as to which of these components of the NIPM is in the ascendancy.

Becoming private property: custom, law, and the geographies of ‘ownership’ in 18th- and 19th-century England

The making private of hitherto public goods is a central tenet of neoliberalism. From land in Africa, Asia, and South America to the assertion of property rights over genes and cells by corporations, the process(es) of making private property matters more than ever. And yet, despite this importance, we know remarkably little about the spatial plays through which things become private property. In this paper I seek to address this imbalance by focusing upon the formative context of 18th- and early-19th-century England. The specific lens is wood, that most critical of all ‘natural’ things other than land in the transition to market-driven economies. It is shown that the interplay between custom, law, and local practices rendered stable and aspatial definitions of property impossible. Whilst law was the key technology through which property was mediated, the cadence of particular places gave these mediations distinctive forms. I conclude that not only must we take property seriously, but we must also take the conditions and contexts of its making seriously too.

Pygmalion in the reintegration process: Desistance from crime through the looking glass

The study of desistance from crime has come of age in recent years, and there are now several, competing theories to account for the ability of long-term offenders to abstain from criminal behavior. Most prominently, recent explanations have borrowed elements from informal social control theory, differential association theory and cognitive psychology. In the following, we argue that labeling theory may be a neglected factor in understanding the desistance process. Drawing on interview data collected as part of a study of an offender reintegration program, we illustrate how the idea of the

Verification of McCabe's Delta L Law for Growth of Lysozyme Crystals by Hanging Drop Method

Lysozyme is a naturally occurring enzyme in egg white and has high commercial importance due to its antimicrobial properties. The main objective of this work was to study the growth rate of lysozyme crystals isolated from egg for the first 72 hours and verify the results with McCabe’s constant crystal growth theory. Hanging drop crystallization method was used to form high purity lysozyme crystals from the embryonic stage. To this end, this work differs from an earlier work of Forsythe et al., who used seed crystals in the size range of 10 µm - 40 µm for face growth measurements at different pH values. The maximum crystal size recorded in the present work was 392.86 µm, which is within the typical size range of 50 µm - 500 µm for which constant crystal growth is expected to hold according to McCabe’s ?L law. Electron micrographs (SEM) revealed the structure and dimensions of the crystals while SDS-Page was used to measure the purity of the crystals. The SEM results showed that that lysozyme growth rate was linear and agreed with McCabe’s constant growth theory, producing a growth rate of 1.77 x 10-3 µm .s-1

From the Land to Sea and Back Again? Using Terrestrial Planning to Understand the Process of Marine Spatial Planning

Over the last 5–10 years, marine spatial planning (MSP) has emerged as a new management regime for national and international waters and has already attracted a substantial body of multi-disciplinary research on its goals and policy processes. This paper argues that this literature has generally lacked deeper reflexive engagement with the emerging system of governance for our seas that has meant that many of MSP’s core concepts, assumptions and institutional arrangements have not been subject rigorous intellectual debate. In an attempt to initiate such an approach, this article explores the relationship between MSP and its land-based cousin, terrestrial spatial planning (TSP). While it is recognized that there are inherent limitations to a comparison of these two systems, it is argued that the tradition of social science debate over the purpose and processes of TSP can be used as a useful stimulus for a more rigorous reflection of such issues as they relate to MSP. The article therefore explores some of the parallels between MSP and TSP and then discusses some of the key intellectual traditions that have shaped TSP and the implications these may have for future marine planning practice. The article concludes with a number of potentially useful new avenues that may form the basis of a critical research agenda for MSP.

Rewarding Merit in Judicial Appointments?: A research project undertaken by the School of Law, Queen’s University Belfast for the Northern Ireland Judicial Appointments Commission

This research involved carrying out an online survey using a number of vignettes/scenarios to explore understandings and attitudes to judicial appointments. This sort of survey is relatively novel in this context and provided a useful way of understanding how a range of factors such as merit and seniority, career paths and connections, as well as gender and visibility, are perceived as operating within the appointments system. The research also involved a series of focus group interviews with a number of individuals with various professional backgrounds and at different levels of seniority. These, and a limited number of individual interviews, afforded an opportunity to explore more closely some of the themes arising from the scenarios as well as a chance to look in some depth at some of the views and concerns of a range of members of the legal professions.

Building upon the previous research project, this work was less concerned with revisiting earlier themes and more interested in exploring how the idea of “merit” as a governing factor in judicial appointment is seen as working in practice, and whether it is perceived as being most likely to be found within particular career profiles. We also investigated issues such as the possible development of formal and informal pathways to a judicial career and practical problems such as how an applicant might become known to the senior judiciary, and the importance of this. Overall our interest was primarily in developing an understanding of how gender is perceived to operate in the appointments process and how any barriers to recruiting women, particularly to the senior judiciary, could be further broken down.

A material model for multiaxial stretching and stress relaxation of polypropylene under process conditions

Polypropylene sheets have been stretched at 160 °C to a state of large biaxial strain of extension ratio 3, and the stresses then allowed to relax at constant strain. The state of strain is reached via a path consisting of two sequential planar extensions, the second perpendicular to the first, under plane stress conditions with zero stress acting normal to the sheet. This strain path is highly relevant to solid phase deformation processes such as stretch blow moulding and thermoforming, and also reveals fundamental aspects of the flow rule required in the constitutive behaviour of the material. The rate of decay of stress is rapid, and such as to be highly significant in the modelling of processes that include stages of constant strain. A constitutive equation is developed that includes Eyring processes to model both the stress relaxation and strain rate dependence of the stress. The axial and transverse stresses observed during loading show that the use of a conventional Levy-Mises flow rule is ineffective, and instead a flow rule is used that takes account of the anisotropic state of the material via a power law function of the principal extension ratios. Finally the constitutive model is demonstrated to give quantitatively useful representation of the stresses both in loading and in stress relaxation.

Thermomechanical analyses of ultrasonic welding process using thermal and acoustic softening effects

Ultrasonic welding process is a rapid manufacturing process used to weld thin layers of metal at low temperatures and low energy consumption. Experimental results have shown that ultrasonic welding is a combination of both surface (friction) and volume (plasticity) softening effects. In the presented work, a very first attempt has been made to simulate the ultrasonic welding of metals by taking into account both of these effects (surface and volume). A phenomenological material model has been proposed which incorporates these two effects (i.e. surface and volume). The thermal softening due to friction and ultrasonic (acoustic) softening has been included in the proposed material model. For surface effects a friction law with variable coefficient of friction dependent upon contact pressure, slip, temperature and number of cycles has been derived from experimental friction tests. Thermomechanical analyses of ultrasonic welding of aluminium alloy have been performed. The effects of ultrasonic welding process parameters, such as applied load, amplitude of ultrasonic vibration, and velocity of welding sonotrode on the friction work at the weld interface are being analyzed. The change in the friction work at the weld interface has been explained on the basis of softening (thermal and acoustic) of the specimen during the ultrasonic welding process. In the end, a comparison between experimental and simulated results has been presented showing a good agreement. © 2008 Elsevier Ltd. All rights reserved.