Coberturas vegetais, manejo do solo, doses de nitrogênio e seus efeitos na nutrição mineral e nos atributos agronômicos do milho

Research has investigated the best nitrogen rate for maize under the most diverse types of soil management. The aim of this study was to evaluate the influence of cover crops, soil management and topdressed N rates on the dry matter production, nutritional status, plant lodging, plant height and first-ear insertion of maize. Field experiments were carried out in Selvíria, Mato Grosso do Sul State, Brazil, in the growing seasons of 2009/2010 and 2010/2011, on a clayey Rhodic Haplustox (20º 20' S and 51º 24' W, at 340 m asl). Thirty-six treatments were established with four replications, in a randomized blocks design, to test combinations of cover crops (millet, Crotalaria juncea and millet + Crotalaria juncea), soil management (tillage with chisel plow + lightweight disking, heavy disking + lightweight disking, and no-tillage system) and N rates (0, 60, 90 e 120 kg ha-1 - urea as source). The maize hybrid DKB 350 YG® was used and topdressing N applied at stage V5 (fifth expanded leaf). Previously grown sunn hemp and millet + sunn hemp resulted in a higher shoot dry matter, P leaf content and total N, P and K uptake. In the no-tillage system, the initial and final population and shoot dry were highest, and first-ear insertion and plant height lower. The application of 120 kg ha-1 topdressed N increased the P leaf content, N and P in the entire plant, shoot dry matter, total N, P and K uptake, plant height, and the first-ear insertion of maize.

Modalities for soil preparation and gypsum application in ultisol: stem productivity of sugarcane

O trabalho foi conduzido em área de expansão de cana-de-açúcar da Usina Vale do Paraná, no município de Suzanápolis - SP, na região do noroeste paulista. Foi utilizada a variedade de cana RB92-5345, espaçamento de 1,5 m entre linhas, em ARGISSOLO VERMELHO. O trabalho objetivou avaliar a produtividade em cana-planta e 1ª cana-soca e alguns atributos químicos de solo, em função dos métodos de preparo do solo e aplicação ou não de gesso. O delineamento experimental utilizado foi o de blocos ao acaso, com seis tratamentos, fatorial 3x2, e seis repetições. Os tratamentos principais foram preparos de solo com três equipamentos: arado de aivecas, escarificador e grade pesada, e dois tratamentos secundários com aplicação de 1 t ha-1 de gesso e sem gesso. Após cada colheita da cana, o solo foi caracterizado quanto aos indicadores de fertilidade nas camadas de 0,0-0,15; 0,15-0,30 e 0,30-0,45 m. As diferenças dos atributos químicos do solo, devido aos métodos de preparo ocorridas na cana-planta, não perduraram até a colheita da 1ª cana-soca e também não influenciaram na produtividade da cultura. A gessagem proporcionou maiores valores de ATR e produtividade de TCH, para cana-planta e 1ª cana-soca, respectivamente, confirmando a hipótese inicial.

Análise econômica do milho em sucessão a diferentes adubos verdes, manejos do solo e doses de nitrogênio

Technologies that increase crop yields are possible when providing profitability to the producer. The objective of this study was to evaluate production costs and profitability of maize in production systems in Cerrado. The study was conducted in Selviria (Mato Grosso do Sul State), Brazil, in the years 2009/10 and 2010/11. The experiment was arranged in randomized blocks with four replications in factorial and mixed with tracks. We established 36 treatments, three green manures (Pennisetum glaucum, Crotalaria juncea and intercropping Pennisetum glaucum + Crotalaria juncea), three soil management practices (no-tillage system, "heavy disking" + "levelling disking" and "chisel plow" + "levelling disking") and four doses of N (0, 60, 90 and 120 kg ha(-1)). For economic analysis were estimated operational cost, the gross revenue obtained by the product of the productivity of the treatments and the value of corn (R$ 0,417 kg or R$ 25,00 sc(-1)) and the ratio revenue / cost of treatment. Whereas higher values (revenue/cost > 1) and lower (revenue/cost ratio < 1) as a parameter in the analysis of profitability, it can be concluded that corn under no-tillage had the highest profitability in succession to Pennisetum glaucum growing profitability with increasing N rates, in succession to Crotalaria juncea and in the absence of nitrogen application on the coverage achieved higher profitability compared to other treatments and in succession to the consortium Pennisetum glaucum + Crotalaria juncea doses of N was between 50 and 55 kg ha(-1) offer greater profitability to the cultivation of corn.

Avaliação do desempenho das máquinas agrícolas na implantação da cultura do girassol

The sunflower oleaginous is the fourth of recognized importance in the oil production and few studies related to agricultural operations adopted for this crop. The objective of the present work was to study the performance of agricultural machines in the conventional tillage and reduced in the plantation of the sunflower crop. The experiment was installed at the Experimental Farm of Lageado, belonging to the Faculty of Agricultural Sciences of UNESP, located in Botucatu-SP. It consisted of two types of tillage (conventional tillage-CC and reduced tillage-CR), with experimental design in randomized blocks and four replications. The treatment CC promoted less coverage of the soil surface protected with waste when compared to CR treatment. The chisel plow was the tillage of equipment that required the tractor higher average traction force, average power traction and slippage, consequently, promoted lower average speed of work. The theoretical field capacity and area of land involved in the treatment CR were superior when compared to treatment CC, thereby lower consumption of fuel per hour worked was lower in CR treatment.

Biphasic positive airway pressure minimizes biological impact on lung tissue in mild acute lung injury independent of etiology

Abstract Introduction Biphasic positive airway pressure (BIVENT) is a partial support mode that employs pressure-controlled, time-cycled ventilation set at two levels of continuous positive airway pressure with unrestricted spontaneous breathing. BIVENT can modulate inspiratory effort by modifying the frequency of controlled breaths. Nevertheless, the optimal amount of inspiratory effort to improve respiratory function while minimizing ventilator-associated lung injury during partial ventilatory assistance has not been determined. Furthermore, it is unclear whether the effects of partial ventilatory support depend on acute lung injury (ALI) etiology. This study aimed to investigate the impact of spontaneous and time-cycled control breaths during BIVENT on the lung and diaphragm in experimental pulmonary (p) and extrapulmonary (exp) ALI. Methods This was a prospective, randomized, controlled experimental study of 60 adult male Wistar rats. Mild ALI was induced by Escherichia coli lipopolysaccharide either intratracheally (ALIp) or intraperitoneally (ALIexp). After 24 hours, animals were anesthetized and further randomized as follows: (1) pressure-controlled ventilation (PCV) with tidal volume (Vt) = 6 ml/kg, respiratory rate = 100 breaths/min, PEEP = 5 cmH2O, and inspiratory-to-expiratory ratio (I:E) = 1:2; or (2) BIVENT with three spontaneous and time-cycled control breath modes (100, 75, and 50 breaths/min). BIVENT was set with two levels of CPAP (Phigh = 10 cmH2O and Plow = 5 cmH2O). Inspiratory time was kept constant (Thigh = 0.3 s). Results BIVENT was associated with reduced markers of inflammation, apoptosis, fibrogenesis, and epithelial and endothelial cell damage in lung tissue in both ALI models when compared to PCV. The inspiratory effort during spontaneous breaths increased during BIVENT-50 in both ALI models. In ALIp, alveolar collapse was higher in BIVENT-100 than PCV, but decreased during BIVENT-50, and diaphragmatic injury was lower during BIVENT-50 compared to PCV and BIVENT-100. In ALIexp, alveolar collapse during BIVENT-100 and BIVENT-75 was comparable to PCV, while decreasing with BIVENT-50, and diaphragmatic injury increased during BIVENT-50. Conclusions In mild ALI, BIVENT had a lower biological impact on lung tissue compared to PCV. In contrast, the response of atelectasis and diaphragmatic injury to BIVENT differed according to the rate of spontaneous/controlled breaths and ALI etiology.

Acellular and "low" pertussis vaccines: adverse events and the role of mutations

Objective: to discuss the current PAHO recommendation that does not support the substitution of traditional cellular DTP vaccine by acellular DTP, and the role of mutations, in humans, as the main cause of rare adverse events, such as epileptic-like convulsions, triggered by pertussis vaccine. Data review: the main components related to toxic effects of cellular pertussis vaccines are the lipopolysaccharide of bacterial cell wall and pertussis toxin. The removal of part of lipopolysaccharide layer has allowed the creation of a safer cellular pertussis vaccine, with costs comparable to the traditional cellular vaccine, and which may be a substitute for the acellular vaccine. Conclusion: The new methodology introduced by Instituto Butantan allows for the development of a new safer pertussis vaccine with low LPS content (Plow), and the use of the lipopolysaccharide obtained in the process in the production of monophosphoryl lipid A. This component has shown potent adjuvant effect when administered together with influenza inactivated vaccine, making possible to reduce the antigen dose, enhancing the production capacity and lowering costs.

Water Table Level as Influenced by Rainfall, Crop Requirements, and Tiling Method during the past Three Years

In 1979, a portion of the research farm was pattern tiled including the large tillage plots. This was used as an opportunity to compare tile installation methods: a conventional trenching machine (used widely prior to late 70s), and a trenchless “tile plow” machine. The tile plow inserted plastic tile using a mole approach, which is the current primary tiling method. This research showed that plow and trenching tiling methods were not significantly different and both provided adequate drainage. It also showed that water table measurements were influenced more by timing of water needs of the crop being grown and intensity of the rainfall event than tiling method. This report focuses on continued research completed on these trial plots from 2009 to 2011 measuring water table level.

Fundamentación del conjunto tractor-apero para la labor de surcado y su influencia en el consumo energético en cultivos de raíces y tubérculos

El cumplimiento de los objetivos agrotécnicos de los cultivos de raíces y tubérculos exige que la labor de surcado configure un caballón que permita el trabajo de los posteriores aperos que participan en las demás labores de cultivo. En la agricultura cubana se emplean diversos tipos de surcadores que difieren en las características de los elementos aporcadores. Este hecho afecta a la capacidad de trabajo del conjunto tractor-apero y por extensión en el consumo de combustible y el rendimiento del cultivo. El objetivo de este trabajo ha sido fundamentar el empleo del apero más adecuado para la labor de surcado en cultivos de raíces y tubérculos (patata, boniato, yuca) en Fluvisoles, teniendo en cuenta el comportamiento de las dimensiones y forma del caballón, cualidades tecnológicas explotativas del conjunto tractor-apero, consumo energético del proceso productivo y el rendimiento agrícola. Los tratamientos considerados estuvieron determinados por la utilización del surcador fertilizador IIMA-BALDAN 4.500 (T1), y los surcadores aporcadores SA-5 (T2) y SA-3 (T3). En los tres tratamientos se alcanzó un perfil de la sección transversal del caballón de configuración cóncavo-convexo. El surcador BALDAN logró el mejor comportamiento de los indicadores tecnológico-explotativos lo que se tradujo en la mayor capacidad de trabajo de 1,36 ha h-1 y el menor consumo de combustible de 5,38 L ha-1. Este mismo tratamiento proporcionó el mayor rendimiento medio de los cultivos superando en un 43,2% al del surcador SA-5 y en un 57,9% al del surcador SA-3. Desde el punto de vista energético T1, obtuvo una mejor eficiencia energética superior en un 43,5% a la del tratamiento T2, y en un 57,1% a la del tratamiento T3. ABSTRACT The achievement of agrotechnical objectives in the cultivation of roots and tubers demands the plow through activity creates a ridge to allow the work of subsequent farming tools participating in other cultivation works. In Cuban Agriculture various kinds of furrowers are used which differ in the characteristics of their earth up elements. This fact affects work capacity of the tractor-farming tool combination and by extension to fuel consumption and cultivation yield. The aim of this work has been to support the use of the most accurate farming tool in the plow through activity for the cultivation of roots and tubers (potato, sweet potato, cassava) in Fluvisoils, taking into account the behaviour of the ridge´s dimensions and shape, technologic-explotative qualities of the tractor-farming tool combination, energy consumption of the productive process and agricultural yield. The treatments considered were determined by the use of fertlizing furrower IIMA-BALDAN 4.500 (T1), and the earth up furrowers SA-5 (T2) and SA-3 (T3). During the three treatments a transverse section profile of the ridge under concave-convex configuration was obtained. The furrower BALDAN achieved the best behaviour of the technologic-explotative indicators, which was translated into the largest work capacity of 1,36 ha h-1 and the smallest fuel consumption of 5,38 L ha-1. This treatment also provided the biggest average yield of the cultivation, overcoming in a 43,2% the furrower SA-5 and furrower SA-3 in a 57,9%. From the energetic point of view T1 gained better energetic efficiency than treatment T2 in a 43,5% and treatment T3 in a 57,1%.

Estudio Energético y de Explotación de diferentes conjuntos de Labranza para el Cultivo de la Yuca (Manihot esculenta, Crantz) en un Fluvisol

El trabajo se desarrolló en tres etapas de investigación, las dos primeras fueron realizadas en la Unidad Básica de Producción Cooperativa “El Palmar” perteneciente a la Empresa de Cultivos Varios "Paquito Rosales Benítez" del municipio de Yara, provincia de Granma, Cuba, el cual se llevó a cabo en el período de abril de 2005 a enero de 2008; y de noviembre de 2012 a febrero de 2013 respectivamente; la tercera se ejecutó de mayo a junio de 2013 en un canal de suelo ubicado en la nave de maquinaria del Departamento de Ingeniería Rural de la Universidad Politécnica de Madrid. En la primera etapa se evaluaron los conjuntos tractor-apero que intervienen en la realización de cuatro sistemas de labranza para el cultivo de la yuca, variedad Enana Rosada. Los sistemas de laboreo fueron: T1, labor de aradura (alzado) con un arado de discos seguidas de un pase de grada de discos un pase cruzado de un escarificador y un pase con una grada de discos (5 labores); T2, laboreo mínimo que comprende una labor profunda con un escarificador con saetas seguido por una labor de grada de discos (2 labores); T3, laboreo mínimo en el que se realizaron dos pases cruzados con escarificador y una labor de fresado con una fresadora de eje horizontal (3 labores) y; T4, dos labores cruzadas con la grada de discos seguidas por otras dos pases cruzados con el escarificador y una última labor con la grada de discos (5 labores). Se realizaron cinco observaciones de la jornada laboral para cada uno de los conjuntos tractorapero de cada sistema de laboreo en tres campañas, evaluando el consumo de combustible, las diferentes productividades, los índices y coeficientes tecnológicos y de explotación, el rendimiento del cultivo el balance energético del mismo, y la emisión de CO2 equivalente. En la segunda etapa se determinó la fuerza de tiro requerida por un órgano de trabajo de un escarificador con saetas en condiciones de campo, en tres profundidades (15, 25 y 35 cm) y a cuatro velocidades de trabajo (1,30; 1,49; 1,65 y 2,32 m s-1). En la tercera etapa se determinaron las fuerzas horizontales y verticales en una maqueta experimental de un órgano de trabajo de un escarificador con saetas (1:5 del tamaño real del apero) en cuatro contenidos de humedad (60, 90, 120 y 150 g kg-1), tres densidades del suelo (1,1; 1,2 y 1,3 Mg m-3) y una velocidad de 40 mm s-1. Se comparan los resultados del apero a tamaño real y la maqueta experimental. Los mejores resultados relacionados con los indicadores evaluados a la maquinaria correspondieron al sistema de laboreo mínimo T2, el cual presenta la mejor productividad por hora de tiempo limpio (1,34 ha h-1) y de tiempo operativo (1,27 ha h-1), con diferencias significativas respecto al resto de los sistemas de labranza evaluados; así como el menor consumo de combustible (32,4 L ha-1) y el mejor comportamiento energético, con diferencias significativas respecto a las demás, resultando inferior en un 63, 30 y 58 % con relación a T1, T3 y T4. La fuerza de tiro del órgano de trabajo del escarificador con saetas se incrementa con la densidad del suelo y con la profundidad, y velocidad de trabajo. Las fuerzas horizontales y verticales de la maqueta se incrementan linealmente con la densidad y humedad del suelo. Existe una relación lineal entre las fuerzas de tiro y horizontales medidas en el apero real y en el apero a escala con el contenido de humedad del suelo. ABSTRACT The work was developed in three stages of research, the first two were conducted in the Basic Unit of Cooperative Production "El Palmar" belonging to the agricultural farm "Paquito Rosales Benitez" in the municipality of Yara, Granma Province, Cuba, the which was conducted in the period from April 2005 to January 2008 and November 2012 and February 2013 respectively, the third from May to June 2013 on a soilbin located in the ship's machinery of Rural Engineering Department of the Technical University of Madrid. In the first stage were evaluated tractor-implement sets involved in the completion of four tillage systems for cassava, Pink Dwarf variety. Tillage systems were: T1, plowing (elevation) with a disk plow followed by a pass of disc harrow, a cross of scarifier and a pass with a disc harrow (5 labours), T2, minimum tillage comprising a deep work with a scarifier with a bolt followed by a disc harrow work (two labours); T3, minimum tillage which two crossed passes performed with scarifier and milling labour with a horizontal axis milling machine (three labours) and, T4, two crossed labours with disc harrow followed by two crossed passes with the scarifier and a final labour with disc harrow (5 labours). Five observations of the working day for each tractor-implement sets of each tillage system in three seasons were performed, evaluating fuel consumption, different productivities, indexes and technological and operational factors, the crop yield energy balance and the emission of CO2 equivalent. In the second stage we determined the draft force required by a working body of a scarifier with bolt under field conditions at three depths (15, 25 and 35 cm) and four operating speeds (1.30, 1.49 , 1.65 and 2.32 m s-1). In the third stage were determined horizontal and vertical forces on an experimental model of a working body of a scarifier with bolt (1:5 real scale of the implement) in four moisture contents (60, 90, 120 and 150 g kg -1), three soil densities (1.1, 1.2, and 1.3 Mg m-3) and a speed of 40 mm s-1.The results of real scale implement the experimental model were compared. The best results related to evaluated machinery indicators corresponded to T2 minimum tillage system, which presents the best productivity per hour clean time (1.34 ha h-1) and operating time (1.27 ha h-1), with significant differences compared to other tillage systems evaluated; as well as lower fuel consumption (32.4 L ha-1) and the best energy performance, with significant differences from the other, resulting lower by 63, 30 and 58% compared to T1, T3 and T4. The draft force of the working body of the scarifier with bolt increases with soil density and depth, and speed of work. The horizontal and vertical forces of the model increase linearly with density and soil moisture. A linear relationship exists between the shot and horizontal forces measured at the real implement and scale implement with the soil moisture content.

Effect of conservation tillage on soil physical properties, in-situ rainwater harvesting, and erosion control in arid and semi-arid regions

La escasez del agua en las regiones áridas y semiáridas se debe a la escasez de precipitaciones y la distribución desigual en toda la temporada, lo que hace de la agricultura de secano una empresa precaria. Un enfoque para mejorar y estabilizar el agua disponible para la producción de cultivos en estas regiones es el uso de tecnologías de captación de agua de lluvia in situ y su conservación. La adopción de los sistemas de conservación de la humedad del suelo in situ, tales como la labranza de conservación, es una de las estrategias para mejorar la gestión de la agricultura en zonas áridas y semiáridas. El objetivo general de esta tesis ha sido desarrollar una metodología de aplicación de labranza de depósito e investigar los efectos a corto plazo sobre las propiedades físicas del suelo de las diferentes prácticas de cultivo que incluyen labranza de depósito: (reservoir tillage, RT), la laboreo mínimo: (minimum tillage, MT), la no laboreo: (zero tillage, ZT) y laboreo convencional: (conventional tillage, CT) Así como, la retención de agua del suelo y el control de la erosión del suelo en las zonas áridas y semiáridas. Como una primera aproximación, se ha realizado una revisión profunda del estado de la técnica, después de la cual, se encontró que la labranza de depósito es un sistema eficaz de cosecha del agua de lluvia y conservación del suelo, pero que no ha sido evaluada científicamente tanto como otros sistemas de labranza. Los trabajos experimentales cubrieron tres condiciones diferentes: experimentos en laboratorio, experimentos de campo en una región árida, y experimentos de campo en una región semiárida. Para investigar y cuantificar el almacenamiento de agua a temperatura ambiente y la forma en que podría adaptarse para mejorar la infiltración del agua de lluvia recolectada y reducir la erosión del suelo, se ha desarrollado un simulador de lluvia a escala de laboratorio. Las características de las lluvias, entre ellas la intensidad de las precipitaciones, la uniformidad espacial y tamaño de la gota de lluvia, confirmaron que las condiciones naturales de precipitación son simuladas con suficiente precisión. El simulador fue controlado automáticamente mediante una válvula de solenoide y tres boquillas de presión que se usaron para rociar agua correspondiente a diferentes intensidades de lluvia. Con el fin de evaluar el método de RT bajo diferentes pendientes de superficie, se utilizaron diferentes dispositivos de pala de suelo para sacar un volumen idéntico para hacer depresiones. Estas depresiones se compararon con una superficie de suelo control sin depresión, y los resultados mostraron que la RT fue capaz de reducir la erosión del suelo y la escorrentía superficial y aumentar significativamente la infiltración. Luego, basándonos en estos resultados, y después de identificar la forma adecuada de las depresiones, se ha diseñado una herramienta combinada (sistema integrado de labranza de depósito (RT)) compuesto por un arado de una sola línea de chisel, una sola línea de grada en diente de pico, sembradora modificada, y rodillo de púas. El equipo fue construido y se utiliza para comparación con MT y CT en un ambiente árido en Egipto. El estudio se realizó para evaluar el impacto de diferentes prácticas de labranza y sus parámetros de funcionamiento a diferentes profundidades de labranza y con distintas velocidades de avance sobre las propiedades físicas del suelo, así como, la pérdida de suelo, régimen de humedad, la eficiencia de recolección de agua, y la productividad de trigo de invierno. Los resultados indicaron que la RT aumentó drásticamente la infiltración, produciendo una tasa que era 47.51% más alta que MT y 64.56% mayor que la CT. Además, los resultados mostraron que los valores más bajos de la escorrentía y pérdidas de suelos 4.91 mm y 0.65 t ha-1, respectivamente, se registraron en la RT, mientras que los valores más altos, 11.36 mm y 1.66 t ha-1, respectivamente, se produjeron en el marco del CT. Además, otros dos experimentos de campo se llevaron a cabo en ambiente semiárido en Madrid con la cebada y el maíz como los principales cultivos. También ha sido estudiado el potencial de la tecnología inalámbrica de sensores para monitorizar el potencial de agua del suelo. Para el experimento en el que se cultivaba la cebada en secano, se realizaron dos prácticas de labranza (RT y MT). Los resultados mostraron que el potencial del agua del suelo aumentó de forma constante y fue consistentemente mayor en MT. Además, con independencia de todo el período de observación, RT redujo el potencial hídrico del suelo en un 43.6, 5.7 y 82.3% respectivamente en comparación con el MT a profundidades de suelo (10, 20 y 30 cm, respectivamente). También se observaron diferencias claras en los componentes del rendimiento de los cultivos y de rendimiento entre los dos sistemas de labranza, el rendimiento de grano (hasta 14%) y la producción de biomasa (hasta 8.8%) se incrementaron en RT. En el experimento donde se cultivó el maíz en regadío, se realizaron cuatro prácticas de labranza (RT, MT, ZT y CT). Los resultados revelaron que ZT y RT tenían el potencial de agua y temperatura del suelo más bajas. En comparación con el tratamiento con CT, ZT y RT disminuyó el potencial hídrico del suelo en un 72 y 23%, respectivamente, a la profundidad del suelo de 40 cm, y provocó la disminución de la temperatura del suelo en 1.1 y un 0.8 0C respectivamente, en la profundidad del suelo de 5 cm y, por otro lado, el ZT tenía la densidad aparente del suelo y resistencia a la penetración más altas, la cual retrasó el crecimiento del maíz y disminuyó el rendimiento de grano que fue del 15.4% menor que el tratamiento con CT. RT aumenta el rendimiento de grano de maíz cerca de 12.8% en comparación con la ZT. Por otra parte, no hubo diferencias significativas entre (RT, MT y CT) sobre el rendimiento del maíz. En resumen, según los resultados de estos experimentos, se puede decir que mediante el uso de la labranza de depósito, consistente en realizar depresiones después de la siembra, las superficies internas de estas depresiones se consolidan de tal manera que el agua se mantiene para filtrarse en el suelo y por lo tanto dan tiempo para aportar humedad a la zona de enraizamiento de las plantas durante un período prolongado de tiempo. La labranza del depósito podría ser utilizada como un método alternativo en regiones áridas y semiáridas dado que retiene la humedad in situ, a través de estructuras que reducen la escorrentía y por lo tanto puede resultar en la mejora de rendimiento de los cultivos. ABSTRACT Water shortage in arid and semi-arid regions stems from low rainfall and uneven distribution throughout the season, which makes rainfed agriculture a precarious enterprise. One approach to enhance and stabilize the water available for crop production in these regions is to use in-situ rainwater harvesting and conservation technologies. Adoption of in-situ soil moisture conservation systems, such as conservation tillage, is one of the strategies for upgrading agriculture management in arid and semi-arid environments. The general aim of this thesis is to develop a methodology to apply reservoir tillage to investigate the short-term effects of different tillage practices including reservoir tillage (RT), minimum tillage (MT), zero tillage (ZT), and conventional tillage (CT) on soil physical properties, as well as, soil water retention, and soil erosion control in arid and semi-arid areas. As a first approach, a review of the state of the art has been done. We found that reservoir tillage is an effective system of harvesting rainwater and conserving soil, but it has not been scientifically evaluated like other tillage systems. Experimental works covered three different conditions: laboratory experiments, field experiments in an arid region, and field experiments in a semi-arid region. To investigate and quantify water storage from RT and how it could be adapted to improve infiltration of harvested rainwater and reduce soil erosion, a laboratory-scale rainfall simulator was developed. Rainfall characteristics, including rainfall intensity, spatial uniformity and raindrop size, confirm that natural rainfall conditions are simulated with sufficient accuracy. The simulator was auto-controlled by a solenoid valve and three pressure nozzles were used to spray water corresponding to different rainfall intensities. In order to assess the RT method under different surface slopes, different soil scooping devices with identical volume were used to create depressions. The performance of the soil with these depressions was compared to a control soil surface (with no depression). Results show that RT was able to reduce soil erosion and surface runoff and significantly increase infiltration. Then, based on these results and after selecting the proper shape of depressions, a combination implement integrated reservoir tillage system (integrated RT) comprised of a single-row chisel plow, single-row spike tooth harrow, modified seeder, and spiked roller was developed and used to compared to MT and CT in an arid environment in Egypt. The field experiments were conducted to evaluate the impact of different tillage practices and their operating parameters at different tillage depths and different forward speeds on the soil physical properties, as well as on runoff, soil losses, moisture regime, water harvesting efficiency, and winter wheat productivity. Results indicated that the integrated RT drastically increased infiltration, producing a rate that was 47.51% higher than MT and 64.56% higher than CT. In addition, results showed that the lowest values of runoff and soil losses, 4.91 mm and 0.65 t ha-1 respectively, were recorded under the integrated RT, while the highest values, 11.36 mm and 1.66 t ha -1 respectively, occurred under the CT. In addition, two field experiments were carried out in semi-arid environment in Madrid with barley and maize as the main crops. For the rainfed barley experiment, two tillage practices (RT, and MT) were performed. Results showed that soil water potential increased quite steadily and were consistently greater in MT and, irrespective of the entire observation period, RT decreased soil water potential by 43.6, 5.7, and 82.3% compared to MT at soil depths (10, 20, and 30 cm, respectively). In addition, clear differences in crop yield and yield components were observed between the two tillage systems, grain yield (up to 14%) and biomass yield (up to 8.8%) were increased by RT. For the irrigated maize experiment, four tillage practices (RT, MT, ZT, and CT) were performed. Results showed that ZT and RT had the lowest soil water potential and soil temperature. Compared to CT treatment, ZT and RT decreased soil water potential by 72 and 23% respectively, at soil depth of 40 cm, and decreased soil temperature by 1.1 and 0.8 0C respectively, at soil depth of 5 cm. Also, ZT had the highest soil bulk density and penetration resistance, which delayed the maize growth and decreased the grain yield that was 15.4% lower than CT treatment. RT increased maize grain yield about 12.8% compared to ZT. On the other hand, no significant differences among (RT, MT, and CT) on maize yield were found. In summary, according to the results from these experiments using reservoir tillage to make depressions after seeding, these depression’s internal surfaces are consolidated in such a way that the water is held to percolate into the soil and thus allowing time to offer moisture to the plant rooting zone over an extended period of time. Reservoir tillage could be used as an alternative method in arid and semi-arid regions and it retains moisture in-situ, through structures that reduce runoff and thus can result in improved crop yields.

Effect of integrated reservoir tillage for in-situ rainwater harvesting and other tillage practices on soil physical properties

There is a need for in-situ soil moisture conservation in arid and semi-arid regions due to insufficient rainfall for agriculture. For this purpose, a combination implement [integrated reservoir tillage system (RT)] comprised of a single-row chisel plow, single-row spike tooth harrow, modified seeder, and spiked roller was developed and compared to the popular tillage practices, viz., minimum tillage (MT) and conventional tillage (CT) in an arid Mediterranean environment in Egypt. The different tillage practices were conducted at tillage depths of 15, 20, and 25 cm and forward speeds of 0.69, 1, 1.25, and 1.53 m s-1. Some soil physical properties, runoff, soil loss, water harvesting efficiency and yield of wheat were evaluated. The different tillage practices caused significant differences in soil physical properties as the RT increased soil infiltration, producing a rate of 48% and 65% higher than that obtained in MT and CT, respectively. The lowest values of runoff and soil loss were recorded under RT as 4.91 mm and 0.65 t ha-1, whereas the highest values were recorded under CT as 11.36 mm and 1.66 t ha-1, respectively. In conclusion, the RT enhanced the infiltration rate, increased water harvesting efficiency, reduced runoff and achieved the highest yield of wheat. The best tillage operating parameters appeared to be at a tillage depth of 20 cm and speed between 1.00 and 1.25 m s-1.

Spatio-temporal distribution of pyrethroids in soil in Mediterranean paddy fields

Purpose The demand of rice by the increase in population in many countries has intensified the application of pesticides and the use of poor quality water to irrigate fields. The terrestrial environment is one compartment affected by these situations, where soil is working as a reservoir, retaining organic pollutants. Therefore, it is necessary to develop methods to determine insecticides in soil and monitor susceptible areas to be contaminated, applying adequate techniques to remediate them. Materials and methods This study investigates the occurrence of ten pyrethroid insecticides (PYs) and its spatio-temporal variance in soil at two different depths collected in two periods (before plow and during rice production), in a paddy field area located in the Mediterranean coast. Pyrethroids were quantified using gas chromatography?mass spectrometry (GC?MS) after ultrasound-assisted extraction with ethyl acetate. The results obtained were assessed statistically using non-parametric methods, and significant statistical differences (p < 0.05) in pyrethroids content with soil depth and proximity to wastewater treatment plants were evaluated. Moreover, a geographic information system (GIS) was used to monitor the occurrence of PYs in paddy fields and detect risk areas. Results and discussion Pyrethroids were detected at concentrations ?57.0 ng g?1 before plow and ?62.3 ng g?1 during rice production, being resmethrin and cyfluthrin the compounds found at higher concentrations in soil. Pyrethroids were detected mainly at the top soil, and a GIS program was used to depict the obtained results, showing that effluents from wastewater treatment plants (WWTPs) were the main sources of soil contamination. No toxic effects were expected to soil organisms, but it is of concern that PYs may affect aquatic organisms, which represents the worst case scenario. Conclusions A methodology to determine pyrethroids in soil was developed to monitor a paddy field area. The use of water fromWWTPs to irrigate rice fields is one of the main pollution sources of pyrethroids. It is a matter of concern that PYs may present toxic effects on aquatic organisms, as they can be desorbed from soil. Phytoremediation may play an important role in this area, reducing the possible risk associated to PYs levels in soil.

A structural basis for integrin activation by the cytoplasmic tail of the αIIb-subunit

A key step in the activation of heterodimeric integrin adhesion receptors is the transmission of an agonist-induced cellular signal from the short α- and/or β-cytoplasmic tails to the extracellular domains of the receptor. The structural details of how the cytoplasmic tails mediate such an inside-out signaling process remain unclear. We report herein the NMR structures of a membrane-anchored cytoplasmic tail of the αIIb-subunit and of a mutant αIIb-cytoplasmic tail that renders platelet integrin αIIbβ3 constitutively active. The structure of the wild-type αIIb-cytoplasmic tail reveals a “closed” conformation where the highly conserved N-terminal membrane-proximal region forms an α-helix followed by a turn, and the acidic C-terminal loop interacts with the N-terminal helix. The structure of the active mutant is significantly different, having an “open” conformation where the interactions between the N-terminal helix and C-terminal region are abolished. Consistent with these structural differences, the two peptides differ in function: the wild-type peptide suppressed αIIbβ3 activation, whereas the mutant peptide did not. These results provide an atomic explanation for extensive biochemical/mutational data and support a conformation-based “on/off switch” model for integrin activation.

Lincoln on agriculture; address, Wisconsin State Agricultural Society, State fair, Milwaukee, September 30, 1859 ...

"Reprinted from the Proceedings of the society, 1859."

The American agriculturist

Published by: Saxton & Miles, Aug. 1842- ; Orange Judd, <1857-1912>