Eficiência dos herbicidas oxadiazil, oxadiazon, oxyfluorfen e Imazapyr sobre a cultura de pinus

Avaliou-se a seletividade de alguns herbicidas para mudas de Pinus caribaea var. Hondurensis e suas eficiências no controle de plantas daninhas. As mudas com 20 cm de altura, produzidas em tubetes, foram transplantadas num espaçamento de 2,0 m x 2,0 m, em parcelas de quatro fileiras com 10,0 m de comprimento. Os tratamentos utilizados foram oxadiazil (600; 800 e 1000 g ha-1), oxadiazon (1140; 1520 e 1900 g ha-1), oxyfluorfen (720 g ha-1), imazapyr (250 g ha-1) e testemunhas (capinada e sem capina), dispostos em blocos ao acaso, com quatro repetições. Os herbicidas foram aplicados sete dias após o transplante, usando-se pulverizador costal, pressurizado com CO2, calibrado para 200 L ha- 1 de calda. As principais plantas daninhas com maior infestação foram: Brachiaria plantaginea e Ipomoea grandifolia e com menor infestação: Galinsoga parviflora e Bidens pilosa. O oxadiazil apresentou excelente controle de B. plantaginea, I. grandifolia e G. parviflora, não sendo eficiente para controle de B. pilosa, embora proporcionasse controle superior ao observado pelo oxadiazon. O oxadiazon foi eficiente até 45 dias após o tratamento para B. plantaginea, G. parviflora e até 90 dias para I. grandifolia. Tanto o oxyfluorfen quanto o imazapyr apresentaram excelente controle das plantas daninhas. De todos os herbicidas avaliados, apenas o imazapyr não deve ser recomendado para aplicação sobre o dossel de Pinus caribaea var. Hondurensis, em face da toxicidade provocada.

Inter-relação da produtividade de madeira do pinus com atributos físico-químicos de um latossolo do cerrado brasileiro

Com relação aos atributos do solo, a produtividade de madeira do pinus varia substancialmente em função do pH, do teor de matéria orgânica e da resistência à penetração. No ano de 2007, no Município de Selvíria (MS) foi analisada a produtividade de madeira do Pinus caribaea var. hondurensis, em função de alguns atributos físico-químicos de um Latossolo Vermelho Distrófico estabelecido num maciço florestal com 21 anos de idade. O objetivo foi selecionar, entre os atributos pesquisados do solo, aquele que melhor se apresentasse para explicar a variabilidade da produtividade de madeira. Para tanto, foi instalado um grid geoestatístico, para a coleta dos dados do solo e da planta, contendo 121 pontos amostrais, numa área de 3 ha do referido maciço. A produtividade de madeira variou diretamente com o pH do solo, tanto linear quanto espacialmente, com valores de 27,0-32,6 m³ ha-1 ano-1 e 3,9-4,4, respectivamente. Nos maiores, 32,6-36,9 m³ ha-1 ano-1 e 4,4-4,9. Dessa forma, o pH revelou ser um apreciável indicador da qualidade química do solo quando o objetivo foi estimar, linear e espacialmente, a produtividade de madeira da essência florestal pesquisada nas condições do Cerrado brasileiro do Sudeste do Estado do Mato Grosso do Sul.

Effect of plant growth regulators in the rooting of Pinus cuttings

O trabalho avaliou o enraizamento de estacas de Pinus caribaea var. hondurensis Morelet sob a ação de diferentes níveis de reguladores vegetais. As estacas foram feitas de brotações de 4 a 6cm de comprimento de mudas de P. caribaea var. hondurensis Morelet com corte bisel na base sendo as acículas basais eliminadas. A base das estacas foram submetidas aos tratamentos por 2 segundos com os seguintes tratamentos: 1- NAA 2000mg L-1; 2- NAA 4000mg L-1; 3- NAA 6000mg L-1; 4- NAA 2000mg L-1 + PBZ 100mg L-1; 5- NAA 4000mg L-1 + PBZ; 6- NAA 6000mg L-1 + PBZ; 7- IBA 2000mg L-1; 8- IBA 4000mg L-1; 9- IBA 6000mg L-1; 10-IBA 2000mg L-1 + PBZ; 11- IBA 4000mg L-1 + PBZ; 12- IBA 6000mg L-1 + PBZ e testemunha. Após os tratamentos as estacas foram plantadas em tubetes contendo 50% de palha de arroz carbonizada e 50% de vermiculita. As avaliações realizadas aos 60 dias após o plantio mostraram que estacas de P. caribaea tratadas com IBA levaram a maior porcentagem de estacas enraizadas que aquelas tratadas com NAA, sendo o mais efetivo, IBA a 4000mg L-1 em conjunto com 100mg L-1 de paclobutrazol.

Micronutrientes em Pinus caribaea morelet I. Efeitos da omissão sobre o desenvolvimento e sintomas de carência

Com o objetivo de determinar os sintomas visuais de carência e os efeitos da omissão de micronutrientes na produção de materia seca e crescimento em altura de mudas de Pinus caribaea var. hondurensis, Pinus caribaea var. bahamensis e Pinus caribea var. cavibaea realizou-se um experimente com vasos, em casa de vegetação, em Piracicaba,SP. Foram empregados os-tratamentos: completo, com omissão de boro, com omissão de ferro, com omissão de manganês. e com omissão de zinco. Usou-se silica lavada como substrato, irrigando-se as plantas duas vezes ao dia com as soluções correspondentes. Após o estabelecimento dos sintomas de carência as plantas foram colhidas e separadas em acículas, ramos e raízes, secas a 75°C e pesadas. Descreveram-se os sintomas de carência, sendo bastante característicos os de Fe e B para as três variedades e os de cobre para P. caribaea var. hondurensis e P. caribaea var. bahamensis. A deficiência de cobre reduziu severamente a produção de matéria seca de P. caribaea var. bahamensis e P. caribaea var. caribaea. A deficiência de boro reduziu a produção de matéria seca de Pinus caribaea var. caribaea e a de ferro a de P. caribaea var. hondurensis. A deficiência de boro limitou preponderantemente o crescimento em altura de P. caribaea var. hondurensis.

Delimitação entre os lenhos juvenil e adulto de pinus elliottii engelm

Trees produce different types of woody tissue during growth. The xylem produced in the first years until a certain cambial age is called juvenile wood and has different physical, mechanical, chemical and anatomical characteristics from that produced later, when the cambial cells have matured. Thus, prior knowledge of the quality of the wood is of fundamental importance for choosing the best use of the material. This work aimed at using data from length of the tracheid and wood density to define the age transition from juvenile to mature wood. For this, three Pinus elliottii var. elliottii trees, aged 35 years, were collected at the Itapetininga Experimental Station, located in the state of São Paulo, Brazil. From each tree, disks of about 5 cm thick were obtained 0.05 m above the ground and used to determine the radial density by the gamma ray attenuation method and to measure the length of the tracheids. The results obtained by linear regression analysis showed that juvenile wood is limited to the first seven years of tree growth and the formation of mature wood occurs after twenty years. For the mature wood, there are significant differences among the averages obtained from the tracheid length and wood density.

Uso de biossólidos como substrato para produção de mudas de pinus e eucalipto

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Compactação de um cambissolo háplico com o tráfego de um trator skidder no arraste de pinus elliottii

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Obtenção de constantes elásticas da madeira de duas espécies de Pinus sp

There are many studies about longitudinal modulus of elasticity of wood, but you can´t say the same of transverse modulus, especially for conifers. The study aimed to characterize and compare the species Pinus elliottii var. elliottii and Pinus elliottii var. elliottii x Pinus cariabeae hondurensis (hybrid), and the longitudinal modulus of elasticity (E) and lateral (G) in bending, to analyze the modulus of elasticity in different spaces and to verify the species studied the ideal range is equal to 21 times the height of the specimen, as prescribed in the normative document NBR 7190/1997, as well as analyzing the relationship G = E/20 defined in the normative document NBR 7190/1997. The wood came from the farm located in Paranapanema, split at the mill São José and the rest of the work was conducted at the Experimental Itapeva Campus - UNESP. Were removed fourteen specimens of each species. The average values of the modulus of elasticity and cross were, respectively, 5828 MPa and 452 MPa for Pinus elliottii var. elliottii and 6407 MPa and 320 MPa for the species of Pinus elliottii var. elliottii x Pinus cariabeae hondurensis (hybrid). The trend lines for the plotted graphs showed an exponential behavior to near linear 21he will equal the constant after this value. We have found the relationship G = E/13, for Pinus elliottii var. elliottii and G = E/20 for hybrid. The results of the modulus and strength for Pinus elliottii var. elliottii and the hybrid were lower than those reported in the literature, showing that this batch inferior quality to apply to structures

Avaliação da qualidade da madeira de cinco espécies de Pinus destinadas à produção de celulose

Pós-graduação em Ciência Florestal - FCA

Stand Structure Governs the Crown Collisions of Lodgepole Pine

We investigated tree sway and crown collision behavior of even-aged lodgepole pine (Pinus contorta Dougl. ex Loud. var. latifolia Engelm.) stands of different structure in Alberta, Canada, to examine how these factors might affect loss of leaf area as stands mature. The Two Creeks stand (TC) had high density and slender trees, while the Chickadee stand (CH) had stout trees. The TC stand was then thinned (TCT) to reduce the stand density. For each stand, simultaneous tree sways of a group of 10 trees were monitored with biaxial clinometers during wind speed of 5 m/s (canopy top). Crown collisions were reconstructed by combining sway displacement of individual trees with their respective crown dimensions. Comparing the sway statistics between stands with contrasting mean bole slenderness (TC and CH) indicated that more slender trees have greater sway displacements, faster sway speeds, and a greater depth of collision. Disturbance by thinning increased sway displacements, sway speeds, and depth of collisions at TCT. Tree sway patterns were circular in shape and not aligned with wind direction, but patterns were elongated after thinning. This demonstrates the high frequency of crown collision experienced by stands with slender trees and supports the notion that crown collisions result in empty space between crowns of trees.

Comportamiento de procedencias de Pinus nigra bajo riego en Dique Yaucha : Mendoza, Argentina

La provincia de Mendoza, que se ubica en el Centro-Oeste de la República Argentina, posee una extensión de 150.830 km2. Prácticamente todas las actividades agropecuarias y forestales están concentradas en el 3% de su territorio que es posible irrigar. Al Oeste, en el límite con la República de Chile, está la cadena montañosa que forma parte de la región fitogeográfica del Desierto Andino que se extiende por más de 500 km, con un ancho promedio de 100 km. El objetivo de este trabajo fue evaluar la supervivencia y el comportamiento de distintas procedencias de Pinus nigra en zonas del piedemonte mendocino. Para ello se instaló una parcela experimental en el Dique Yaucha, ubicado en el Departamento de San Carlos a 34°00’ S y 69°07’ O, a una altura de 1.213 msnm. Las procedencias del ensayo fueron: Pinus nigra var. clusiana (Francia), Pinus nigra var. austríaca (Livo - Italia), Pinus nigra var. austríaca (Lasa - Italia), Pinus nigra var. knin (ex Yugoslavia) y Pinus nigra var. pyramidalis (Turquía). Se llevaron plantas de aproximadamente 0,30 m de altura que se instalaron a una distancia de plantación definitiva de 3 x 3 m y se regaron superficialmente por surcos. Se tomaron periódicamente datos dasométricos de diámetro altura de pecho (DAP) de todas las plantas, altura total de los árboles promedio de cada procedencia, registrándose además las fallas producidas y el estado sanitario. Los resultados obtenidos a la edad de 17 años son: Pinus nigra var. clusiana (Francia): diámetro promedio 12,1 cm, altura 5,2 m y 10% de fallas; Pinus nigra var. austríaca (Livo -Italia): diámetro promedio 13 cm, altura 4,6 m y 25% de fallas; Pinus nigra var. austríaca (Lasa - Italia): diámetro promedio 13,9 cm, altura 5,60 m y 0% de fallas; Pinus nigra var. knin (ex Yugoslavia): diámetro promedio 14,1cm, altura 6,2 m y 15% de fallas y Pinus nigra var. pyramidalis (Turquía): diámetro promedio 11,6 cm, altura 5,8 m y 40% de fallas. Las plantas presentan una gran variabilidad de formas desde porte abierto a muy fastigiado. Todas las procedencias presentan un buen estado sanitario, no registrándose hasta la fecha plagas o enfermedades que hayan afectado el desarrollo del ensayo.

Glulam beams reinforced with FRP externally-bonded: theoretical and experimental evaluation

The glued- laminated lumber (glulam) technique is an efficient process for the rational use of wood. Fiber-reinforced polymer (FRPs) associated with glulam beams provide significant improvements in strength and stiffness and alter the failure mode of these structural elements. In this context, this paper presents guidance for glulam beam production, an experimental analysis of glulam beams made of Pinus caribea var. hondurensis species without and with externally-bonded FRP and theoretical models to evaluate reinforced glulam beams (bending strength and stiffness). Concerning the bending strength of the beams, this paper aims only to analyze the limit state of ultimate strength in compression and tension. A specific disposal was used in order to avoid lateral buckling, once the tested beams have a higher ratio height-to-width. The results indicate the need of production control so as to guarantee a higher efficiency of the glulam beams. The FRP introduced in the tensile section of glulam beams resulted in improvements on their bending strength and stiffness due to the reinforcement thickness increase. During the beams testing, two failure stages were observed. The first was a tensile failure on the sheet positioned under the reinforcement layer, while the second occurred as a result of a preliminary compression yielding on the upper side of the lumber, followed by both a shear failure on the fiber-lumber interface and a tensile failure in wood. The model shows a good correlation between the experimental and estimated results.

Transpecific microsatellites for hard pines M. Shepherd, M. Cross, T. Maguire, M. Dieters, C. Williams, R. Henry

Microsatellites are difficult to recover from large plant genomes so cross-specific utilisation is an important source of markers. Fifty micro satellites were tested for cross-specific amplification and polymorphism to two New World hard pine species, slash pine (Pinus elliottii var. elliottii) and Caribbean pine (R caribaea var. hondurensis). Twenty-nine (58%) markers amplified in both hard pine species, and 23 of these 29 were polymorphic. Soft pine (subgenus Strobus) microsatellite markers did amplify, but none were polymorphic. Pinus elliottii var. elliottii and R caribaea var. hondurensis showed mutational changes in the flanking regions and the repeat motif that were informative for Pinus spp. phylogenetic relationships. Most allele length variation could be attributed to variability in repeat unit number. There was no evidence for ascertainment bias.

Growth of subtropical ECM fungi with different nitrogen sources using a new floating culture technique

Eight species of ectomycorrhizal (ECM) fungi in the genera Amanita. Gymnoboletus, Lactarius, and Russula were isolated from subtropical plant communities in eastem Australia. Two species were isolated from each of rainforest, Nothofagus forest, Eucalyptus forest, and Eucalyptus dominated wallum (heath) forest. These communities differ strongly in their soluble soil nitrogen (N) composition. The ability of the fungi to use inorganic (nitrate, ammonium) and organic (amide, peptide, protein) nitrogen sources was determined. As the fungi did not grow in liquid culture, a 'floating culture' technique was devised that allows hyphal growth on a screen floating on liquid medium. With some exceptions, fungal biomass production in floating culture closely reflected fungal growth on solid media assessed by total colony glucosamine content. Most isolates grown in floating culture had similar glucosamine concentrations on all N sources, with isolate specific concentrations ranging from 6 to 12 mug glucosamine g(-1) DW. However, Russula spp. had up to 1.7-fold higher glucosamine concentrations when growing with glutamine or ammonium compared to nitrate, glutathione or protein. Floating cultures supplied with 0.5, 1.5. 4.5, or 10 mm N mostly produced greatest biomass with 4.5 mM N. In vitro nitrate reductase activity (NRA) ranged from very low (0.03 mumol NO2- g(-1) fw h(-1)) in Russula sp. (wallum) to high (2.16 mumol NO2- g(-1) fw h(-1)) in Gymnoboletus sp. (rainforest) and mirrored the fungi's ability to use nitrate as a N source. All Russula spp. (wallum, Nothofagus and Eucalyptus forests), Lactarills sp, (rainforest) and.4manita sp. (wallum) utilized ammonium and glutamine but had little ability to use other N sources. In contrast,Amanita species (Nothofagus and Eucalyptus forests) grew on all N sources but produced most biomass with ammonium and glutamine. Only Gymnoboletus sp. (rainforest) showed similar growth with nitrate and ammonium as N sources. Fungal N source use was not associated with taxonomic groups, but is discussed in the context of soil N sources in the different habitats.

Genetic variation in foliar carbon isotope composition in relation to tree growth and foliar nitrogen concentration in clones of the F-1 hybrid between slash pine and Caribbean pine

The objectives of this study were: (1) to quantify the genetic variation in foliar carbon isotope composition (delta(13)C) of 122 clones of ca. 4-year-old F-1 hybrids between slash pine (Pinus elliottii Engelm var. elliottii) and Caribbean pine (Pinus caribaea var. hondurensis Barr.,et Golf.) grown at two field experimental sites with different water and nitrogen availability in southeast Queensland, Australia, in relation to tree growth and foliar nitrogen concentration (N-mass); and (2) to assess the potential of using delta(13)C measurements, in the foliage materials collected from the clone hedges at nursery and the 4-year-old tree canopies in the field, as an indirect index of tree water use efficiency for selecting elite F-1 hybrid pine clones with improved tree growth. There were significant differences in foliar delta(13)C between the nursery hedges and the 4-year-old tree canopies in the field, between the summer and winter seasons, between the two experimental sites, and between the upper outer and lower outer canopy positions sampled. This indicates that delta(13)C measurements in the foliage materials are significantly influenced by the sampling techniques and environmental conditions. Significant differences in foliar delta(13)C, at the upper outer canopy in both field experiments in summer and winter, were detected between the clones, and between the female parents of the clones. Clone means of tree height at age ca. 3 years were positively related to those of the upper outer canopy delta(13)C at both experimental sites in winter, but only for the wetter site in summer. There were positive, linear relationships between clone means of canopy delta(13)C and those of canopy N-mass, indicating that canopy photosynthetic capacity might be an important factor regulating the clonal variation in canopy delta(13)C. Significant correlations were found between clone means of canopy delta(13)C at both experimental sites in summer and winter, and between those at the upper outer and lower outer canopy positions. Mean clone delta(13)C for the nursery hedges was only positively related to mean clone stem diameter at 1.3 m height at age 3 years on the wetter site. The clone by site interaction for foliar delta(13)C at the upper outer canopy was significant only in summer. Overall, the relatively high genetic variance components for foliar delta(13)C and significant, positive correlations between clone means of foliar delta(13)C and tree growth have highlighted the potential of using foliar delta(13)C measurements for assisting in selection of the elite F-1 hybrid pine clones with improved tree growth. (C) 2002 Elsevier Science B.V. All rights reserved.