936 resultados para Perda sanguínea cirúrgica
Resumo:
Este trabalho apresenta um estudo realizado em um grupo de trabalhadores de uma indústria de processamento de madeira aglomerada, expostos a níveis de pressão sonora elevada durante a jornada de trabalho. O reconhecimento, avaliação, controle e monitoramento dos riscos ambientais e implementação de programas de prevenção, entre eles, o Programa de Controle de Ruído e Conservação Auditiva, possibilitou verificar a influência da utilização do protetor auditivo na perda auditiva ao longo dos anos de trabalho em ambiente ruidoso. Observou-se que os trabalhadores que usavam o protetor auditivo regularmente apresentaram menos perda auditiva com um tempo maior de exposição (em anos) ao nível de pressão sonora elevada de modo contínuo, mesmo sendo levado em conta a superestimação da atenuação do equipamento de proteção individual, tanto em relação ao ambiente como ao tempo de uso. Também se observou que o limite de tolerância de 85 dB(A), valor utilizado como referência em não causar dano à saúde do trabalhador durante sua vida laboral, utilizado até 1994, não representa um nível confiável (seguro). Significando que, a partir desta data, o valor de 80 dB(A) como referência para o nível de ação de medidas preventivas adotado no Brasil, proporcionará resultado muito positivo em relação à prevenção da perda auditiva de seus trabalhadores. Ressalta-se como resultado mais expressivo do estudo a estabilidade dos limiares auditivos em ambas as orelhas de 81% da população, indicando que as medidas adotadas em relação ao meio ambiente e ao homem são de grande importância para a preservação da integridade física, psicológica e social dos trabalhadores
Resumo:
GURGEL, Bruno Cesar de vasconcelos.Influencia do meloxicam sobre a perda ossea alveolar em periodontite experimental: avaliaçao histometrica em ratos. 2003.97f. Dissertaçao (Mestrado) - Universidade Estadual de Campinas. Faculdade de Odontologia de Piracicaba. Piracicaba, 2003. Disponivel em:
Resumo:
Analisar, em pacientes submetidos a simpaticotomia videotoracoscópica para tratamento da Hiperidrose Primária (HP), as conseqüências hemodinâmicas da desnervação vascular das artérias carótidas e vertebrais após a trans-secção cirúrgica da cadeia simpática torácica (simpaticotomia), através da mensuração de parâmetros ultra-sonográficos. Método: Vinte e quatro pacientes portadores de HP submetidos a quarenta e oito simpaticotomias torácicas endoscópicas foram avaliados através da mensuração da velocidade de pico sistólico (VPS), velocidade de pico diastólico (VPD), índice de pulsatibilidade (IP) e índice de resistência (IR) nas artérias carótidas comuns, internas e externas, além da artéria vertebral bilateralmente usando o eco-doppler duplex scan. As avaliações foram realizadas antes da intervenção cirúrgica e trinta dias após o procedimento. O teste de Wilcoxon foi usado na análise das diferenças entre as variáveis antes e depois da simpaticotomia. Resultados: A simpaticotomia no nível de T3 foi a trans-secção mais realizada (95,83%), seja isoladamente (25%) ou associada a T4 (62,50%) ou a T2 (8,33%). Houve aumento significativo no IR e no IP da artéria carótida comum bilateralmente (p<0,05). A VPD da artéria carótida interna diminuiu em ambos os lados (p<0,05). A VPS e a VPD da artéria vertebral direita também aumentaram (p<0,05). Achados assimétricos foram observados, de modo que artérias do lado direito foram as mais freqüentemente afetadas. Conclusões: Alterações hemodinâmicas foram observadas nas artérias vertebral e carótida após simpaticotomia para tratamento de HP. VPS foi o parâmetro mais freqüentemente alterado, principalmente nas artérias do lado direito, representando alterações assimétricas significantes nas artérias carótida e vertebral. Entretanto, são necessárias pesquisas subseqüentes para verificar se essas alterações são definitivas ou temporárias, uma vez que as inferências clínicas somente terão validação se as alterações forem permanentes
Resumo:
The materials engineering includes processes and products involving several areas of engineering, allowing them to prepare materials that fulfill the needs of various new products. In this case, this work aims to study a system composed of cement paste and geopolymers, which can contribute to solving an engineering problem that directly involves the exploitation of oil wells subject to loss of circulation. To correct it, has been already proposed the use of granular materials, fibers, reducing the drilling fluid or cement paste density and even surface and downhole mixed systems. In this work, we proposed the development of a slurry mixed system, the first was a cement-based slurry and the second a geopolymer-based slurry. The cement-based slurry was formulated with low density and extenders, 12.0 ppg (1.438 g/cm ³), showing great thixotropic characteristics. It was added nano silica at concentrations of 0.5, 1.0 and 1.5 gps (66.88, 133.76 and 200.64 L/m3) and CaCl2 at concentrations of 0.5, 1, 0 and 1.5%. The second system is a geopolymer-based paste formulated from molar ratios of 3.5 (nSiO2/nAl2O3), 0.27 (nK2O/nSiO2), 1.07 (nK2O/nAl2O3) and 13.99 (nH2O/nK2O). Finally, we performed a mixture of these two systems, for their application for correction of circulation lost. To characterize the raw materials, XRD, XRF, FTIR analysis and titration were performed. The both systems were characterized in tests based on API RP10B. Compressive strength tests were conducted after curing for 24 hours, 7 and 28 days at 58 °C on the cement-based system and the geopolymer-based system. From the mixtures have been performed mixability tests and micro structural characterizations (XRD, SEM and TG). The results showed that the nano silica, when combined with CaCl2 modified the rheological properties of the cement slurry and from the concentration of 1.5 gpc (200.64 L / m³) it was possible to obtain stable systems. The system mixture caused a change in the microstructure of the material by favoring the rate of geopolymer formation to hinder the C3S phase hydration, thus, the production of CSH phases and Portlandite were harmed. Through the mixability tests it can be concluded that the system, due to reduced setting time of the mixture, can be applied to plug lost circulation zones when mixed downhole
Resumo:
Waterflooding is a technique largely applied in the oil industry. The injected water displaces oil to the producer wells and avoid reservoir pressure decline. However, suspended particles in the injected water may cause plugging of pore throats causing formation damage (permeability reduction) and injectivity decline during waterflooding. When injectivity decline occurs it is necessary to increase the injection pressure in order to maintain water flow injection. Therefore, a reliable prediction of injectivity decline is essential in waterflooding projects. In this dissertation, a simulator based on the traditional porous medium filtration model (including deep bed filtration and external filter cake formation) was developed and applied to predict injectivity decline in perforated wells (this prediction was made from history data). Experimental modeling and injectivity decline in open-hole wells is also discussed. The injectivity of modeling showed good agreement with field data, which can be used to support plan stimulation injection wells
Resumo:
The oil companies in the area in general are looking for new technologies that can increase the recovery factor of oil contained in reservoirs. These investments are mainly aimed at reducing the costs of projects which are high. Steam injection is one of these special methods of recovery in which steam is injected into the reservoir in order to reduce the viscosity of the oil and make it more mobile. The process assisted gravity drainage steam (SAGD) using steam injection in its mechanism, as well as two parallel horizontal wells. In this process steam is injected through the horizontal injection well, then a vapor chamber is formed by heating the oil in the reservoir and, by the action of gravitational forces, this oil is drained down to where the production well. This study aims to analyze the influence of pressure drop and heat along the injection well in the SAGD process. Numerical simulations were performed using the thermal simulator STARS of CMG (Computer Modeling Group). The parameters studied were the thermal conductivity of the formation, the flow of steam injection, the inner diameter of the column, the steam quality and temperature. A factorial design was used to verify the influence of the parameters studied in the recovery factor. We also analyzed different injection flow rates for the model with pressure drop and no pressure drop, as well as different maximum flow rates of oil production. Finally, we performed an economic analysis of the two models in order to check the profitability of the projects studied. The results showed that the pressure drop in injection well have a significant influence on the SAGD process.
Resumo:
Injectivity decline, which can be caused by particle retention, generally occurs during water injection or reinjection in oil fields. Several mechanisms, including straining, are responsible for particle retention and pore blocking causing formation damage and injectivity decline. Predicting formation damage and injectivity decline is essential in waterflooding projects. The Classic Model (CM), which incorporates filtration coefficients and formation damage functions, has been widely used to predict injectivity decline. However, various authors have reported significant discrepancies between Classical Model and experimental results, motivating the development of deep bed filtration models considering multiple particle retention mechanisms (Santos & Barros, 2010; SBM). In this dissertation, inverse problem solution was studied and a software for experimental data treatment was developed. Finally, experimental data were fitted using both the CM and SBM. The results showed that, depending on the formation damage function, the predictions for injectivity decline using CM and SBM models can be significantly different
Resumo:
Nowadays, most of the hydrocarbon reserves in the world are in the form of heavy oil, ultra - heavy or bitumen. For the extraction and production of this resource is required to implement new technologies. One of the promising processes for the recovery of this oil is the Expanding Solvent Steam Assisted Gravity Drainage (ES-SAGD) which uses two parallel horizontal wells, where the injection well is situated vertically above the production well. The completion of the process occurs upon injection of a hydrocarbon additive at low concentration in conjunction with steam. The steam adds heat to reduce the viscosity of the oil and solvent aids in reducing the interfacial tension between oil/ solvent. The main force acting in this process is the gravitational and the heat transfer takes place by conduction, convection and latent heat of steam. In this study was used the discretized wellbore model, where the well is discretized in the same way that the reservoir and each section of the well treated as a block of grid, with interblock connection with the reservoir. This study aims to analyze the influence of the pressure drop and heat along the injection well in the ES-SAGD process. The model used for the study is a homogeneous reservoir, semi synthetic with characteristics of the Brazilian Northeast and numerical simulations were performed using the STARS thermal simulator from CMG (Computer Modelling Group). The operational parameters analyzed were: percentage of solvent injected, the flow of steam injection, vertical distance between the wells and steam quality. All of them were significant in oil recovery factor positively influencing this. The results showed that, for all cases analyzed, the model considers the pressure drop has cumulative production of oil below its respective model that disregards such loss. This difference is more pronounced the lower the value of the flow of steam injection
Resumo:
Stress urinary incontinence (SUI) is defined as "involuntary loss of urine" due to several processes that alter the ability of the bladder to hold urine properly, regarded as a social and hygienic problem that adversely affects quality of life. In postmenopausal women, IU is associated with atrophy and weakness of the pelvic floor muscles. The objective this study was investigate, using the onehour pad test, stress urinary leakage (SUI), evaluate and compare their results in postmenopausal and premenopausal women. The survey was characterized as a cross-sectional study. The study consisted of 60 postmenopausal women were divided into GIU - consisting of 34 volunteers complaining of involuntary loss of urine during stress - and GSIU - consisting of 26 volunteers without complaints of loss of urine during stress, and 15 women, during the premenopausal (GPM), and ovulatory with normal menstrual cycle. All volunteers were evaluated clinically, subjected to one-hour pad test, after the biochemical evaluation of blood and sex hormones. Statistical analysis was performed by descriptive analysis, ANOVA, Turkey´s post-test and Pearson correlation. The results showed that 100% of postmenopausal patients had involuntary loss of urine during one hour pad test (GIU: 4.0 g; GSIU: 4.5 g). GPM remained continent after an hour pad test (GPM: 0.4 g). In addition, Pearson showed a strong correlation between urine loss with time since menopause (r = 0.8, p <0.01) and body mass index - BMI (r = 0.7; p = 0.01). These data suggest that the one-hour pad test is a useful test to assess and quantify urinary leakage, including those volunteers who had no previous complaint of SUI
Resumo:
Analyze, in patients with primary hyperhidrosis (PH) who was undergone to videothoracoscopic sympathicotomy, the degree of vascular denervation after surgical transection of the thoracic sympathetic chain by measuring ultrasonografic parameters in carotid and vertebral arteries. Methods: Twenty-four patients with PH underwent forty-eight endoscopic thoracic sympathicotomy and were evaluated by duplex eco-doppler measuring systolic peak velocity (SPV), diastolic peak velocity (DPV), pulsatility index (PI) and resistivity index (RI) in bilateral common, internal and external carotids, besides bilateral vertebral arteries. The exams were performed before operations and a month later. Wilcoxon test was used to analyse the differences between the variables before and after the sympatholisis. Results: T3 sympathicotomy segment was the most frequent transection done (95,83%), as only ablation (25%) or in association with T4 (62,50%) or with T2 (8,33%). It was observed increase in RI and PI of the common carotid artery ( p<0,05). The DPV of internal carotid artery decreased in both sides (p<0,05). The SPV and the DPV of the right and left vertebral arteries also increased (p<0,05). Asymmetric findings were observed so that, arteries of the right side were the most frequently affected. Conclusions: Hemodynamic changes in vertebral and carotid arteries were observed after sympathicotomy for PH. SPV was the most often altered parameter, mostly in the right side arteries, meaning significant asymmetric changes in carotid and vertebral vessels. Therefore, the research findings deserve further investigations to observe if they have clinical inferences