3D probability tomography: theoretical developments and applications to high-resolution geophysical prospecting

The theory of the 3D multipole probability tomography method (3D GPT) to image source poles, dipoles, quadrupoles and octopoles, of a geophysical vector or scalar field dataset is developed. A geophysical dataset is assumed to be the response of an aggregation of poles, dipoles, quadrupoles and octopoles. These physical sources are used to reconstruct without a priori assumptions the most probable position and shape of the true geophysical buried sources, by determining the location of their centres and critical points of their boundaries, as corners, wedges and vertices. This theory, then, is adapted to the geoelectrical, gravity and self potential methods. A few synthetic examples using simple geometries and three field examples are discussed in order to demonstrate the notably enhanced resolution power of the new approach. At first, the application to a field example related to a dipole–dipole geoelectrical survey carried out in the archaeological park of Pompei is presented. The survey was finalised to recognize remains of the ancient Roman urban network including roads, squares and buildings, which were buried under the thick pyroclastic cover fallen during the 79 AD Vesuvius eruption. The revealed anomaly structures are ascribed to wellpreserved remnants of some aligned walls of Roman edifices, buried and partially destroyed by the 79 AD Vesuvius pyroclastic fall. Then, a field example related to a gravity survey carried out in the volcanic area of Mount Etna (Sicily, Italy) is presented, aimed at imaging as accurately as possible the differential mass density structure within the first few km of depth inside the volcanic apparatus. An assemblage of vertical prismatic blocks appears to be the most probable gravity model of the Etna apparatus within the first 5 km of depth below sea level. Finally, an experimental SP dataset collected in the Mt. Somma-Vesuvius volcanic district (Naples, Italy) is elaborated in order to define location and shape of the sources of two SP anomalies of opposite sign detected in the northwestern sector of the surveyed area. The modelled sources are interpreted as the polarization state induced by an intense hydrothermal convective flow mechanism within the volcanic apparatus, from the free surface down to about 3 km of depth b.s.l..

Strategies to identify and further characterize novel and known genes involved in regulation of skeletogenesis

372 osteochondrodysplasias and genetically determined dysostoses were reported in 2007 [Superti-Furga and Unger, 2007]. For 215 of these conditions, an association with one or more genes can be stated, while the molecular changes for the remaining syndromes remain illusive to date. Thus, the present dissertation aims at the identification of novel genes involved in processes regarding cartilage/ bone formation, growth, differentiation and homeostasis, which may serve as candidate genes for the above mentioned conditions. Two different approaches were undertaken. Firstly, a high throughput EST sequencing project from a human fetal cartilage library was performed to identify novel genes in early skeletal development (20th week of gestation until 2nd year of life) that could be investigated as potential candidate genes. 5000 EST sequences were generated and analyzed representing 1573 individual transcripts, corresponding to known (1400) and to novel, yet uncharacterized genes (173). About 7% of the proteins were already described in cartilage/ bone development or homeostasis, showing that the generated library is tissue specific. The remaining profile of this library was compared to previously published libraries from different time points (8th–12th, 18th–20th week and adult human cartilage) that also showed a similar distribution, reflecting the quality of the presented library analyzed. Furthermore, three potential candidate genes (LRRC59, CRELD2, ZNF577) were further investigated and their potential involvement in skeletogenesis was discussed. Secondly, a disease-orientated approach was undertaken to identify downstream targets of LMX1B, the gene causing Nail-Patella syndrome (NPS), and to investigate similar conditions. Like NPS, Genitopatellar syndrome (GPS) is characterized by aplasia or hypoplasia of the patella and renal anomalies. Therefore, six GPS patients were enrolled in a study to investigate the molecular changes responsible for this relatively rare disease. A 3.07 Mb deletion including LMX1B and NR5A1 (SF1) was found in one female patient that showed features of both NPS and GPS and investigations revealed a 46,XY karyotype and ovotestes indicating true hermaphroditism. The microdeletion was not seen in any of the five other patients with GPS features only, but a potential regulatory element between the two genes cannot be ruled out yet. Since Lmx1b is expressed in the dorsal limb bud and in podocytes, proteomic approaches and expression profiling were performed with murine material of the limbs and the kidneys to identify its downstream targets. After 2D-gel electrophoresis with protein extracts from E13.5 fore limb buds and newborn kidneys of Lmx1b wild type and knock-out mice and mass spectrometry analysis, only two proteins, agrin and carbonic anhydrase 2, remained of interest, but further analysis of the two genes did not show a transcriptional down regulation by Lmx1b. The focus was switched to expression profiles and RNA from newborn Lmx1b wild type and knock-out kidneys was compared by microarray analysis. Potential Lmx1b targets were almost impossible to study, because of the early death of Lmx1b deficient mice, when the glomeruli, containing podocytes, are still immature. Because Lmx1b is also expressed during limb development, RNA from wild type and knock-out Lmx1b E11.5 fore limb buds was investigated by microarray, revealing four potential Lmx1b downstream targets: neuropilin 2, single-stranded DNA binding protein 2, peroxisome proliferative activated receptor, gamma, co-activator 1 alpha, and short stature homeobox 2. Whole mount in situ hybridization strengthened a potential down regulation of neuropilin 2 by Lmx1b, but further investigations including in situ hybridization and protein-protein interaction studies will be needed.

Nuovo scaffold biomimetico per il trattamento delle lesioni osteocondrali: studio clinico pilota

Nel corso degli anni diverse sono le tecniche proposte per il trattamento delle lesioni osteocondrali, da quelle mini-invasive con stimolazione midollare fino a quelle più aggressive basate sul trapianto di tessuti autologhi o eterologhi. Tutti questi metodi hanno comunque dei difetti ed è questo il motivo per cui il trattamento delle lesioni osteocondrali rappresenta tuttora una sfida per il chirurgo ortopedico, in considerazione dell’alta specializzazione e del basso potere di guarigione del tessuto cartilagineo. Buoni risultati sono stati ottenuti con innesti bioingegnerizzati o matrici polimeriche impiantati nei siti danneggiati. La quantità di scaffolds in uso per la riparazione condrale ed osteocondrale è molto ampia; essi differiscono non solo per il tipo di materiali usati per la loro realizzazione, ma anche per la presenza di promotori di una o più linee cellulari , su base condrogenica o osteogenica. Quando ci si approccia ad una lesione condrale di grandi dimensioni, l’osso sub-condrale è anch’esso coinvolto e necessita di trattamento per ottenere il corretto ripristino degli strati articolari più superficiali. La scelta più giusta sembra essere un innesto osteocondrale bioingegnerizzato, pronto per l’uso ed immediatamente disponibile, che consenta di effettuare il trattamento in un unico tempo chirurgico. Sulla base di questo razionale, dopo uno studio preclinico animale e previa autorizzazione del comitato etico locale, abbiamo condotto uno studio clinico clinico pilota utilizzando un nuovo innesto biomimetico nanostrutturato per il trattamento di lesioni condrali ed osteocondrali del ginocchio; la sua sicurezza e maneggevolezza, così come la facile riproducibilità della tecnica chirurgica ed i risultati clinici ottenuti sono stati valutati nel tempo a 6, 12, 24, 36 e 48 mesi dall’impianto in modo da testare il suo potenziale intrinseco senza l’aggiunta di alcuna linea cellulare.

Analisi e realizzazione di un convertitore multilivello ad alta efficienza per applicazioni fotovoltaiche

Nei primi vent’anni, la ricerca in ambito fotovoltaico si è focalizzata sull’evoluzione di quelle tecnologie associate alla semplice cella ed al sistema intero, per offrire miglioramenti con particolare riguardo al fronte dell’efficienza. Negli ultimi decenni, lo studio sull’energia rinnovabile ha ampliato i propri confini, sino a quella branca denominata elettronica di potenza, che ne permette la conversione e lo sfruttamento da parte dell’utente. L’elaborato si propone quindi di apportare un contributo verso tale direzione, teorico piuttosto che pratico, esaminando dapprima il mondo che effettivamente circonda l’impianto fotovoltaico grid-connected e successivamente ponderando e pianificando le scelte che conseguono dall’analisi letteraria. Particolare attenzione sarà rivolta al concetto di multilivello relativo agli inverter e agli aspetti che ne comportano il largo utilizzo nell’elettronica di potenza. Si stima che i primi brevetti risalgano a circa trent’anni orsono e uno di questi, tracciabile, riguarderebbe la configurazione a cascata di full-bridge, alimentati separatamente in DC, per ottenere a valle una scala di tensioni AC. Per mezzo di manipolazioni, nascerà in seguito il diode-clamped, attuale predecessore del Neutral Point Clamped T-Type Inverter. Si introdurranno pertanto le principali caratteristiche che contraddistinguono il convertitore, peculiare riguardo per la configurazione single leg nonché trifase. Ardua sarà la scelta sulla tecnica di controllo dell’inverter, sia per quanto concerne la fase simulativa che quella realizzativa, in quanto il dispositivo è indubbiamente considerato innovativo nel proprio campo di appartenenza. Convalidando la letteratura per mezzo di opportune simulazioni, si potrà procedere alla progettazione e quindi all’assemblaggio della scheda che effettivamente include l’inverter. Il lavoro implicherà numerose prove, effettuate in svariate condizioni di funzionamento, al fine di sostenere le conclusioni teoriche.

Sviluppo di un framework per la gestione di documenti multimediali

Questo lavoro di tesi si propone di realizzare un sistema in grado non solo di gestire la similarità tra media di stesso tipo, in modo tale da essere al pari per potenzialità in catalogazione e ricerca dei sistemi esistenti, ma di introdurre anche il concetto di similarità tra documenti, i quali contengono media di diverso tipo. Anche se esistono già DBMS in grado di gestire tipi di media complessi, nessuno ha un modello in grado di gestire la compresenza di più tipi di dato efficientemente. Per realizzare un sistema multimediale che sia in grado di gestire non solo la similarità tra media compatibili per tipo ma in generale la ricerca tra documenti si è deciso di utilizzare sistemi per media specifici già esistenti e di integrarli in modo da farli cooperare. A tale proposito si è deciso inizialmente di creare un sistema in grado di gestire documenti che possano contenere inizialmente parti testuali, immagini, video e serie temporali. E’ chiaro intuire come le differenze tra i singoli sistemi (e tra le singole tipologie di dati) rendano quasi impossibile il confronto tra media di tipo diverso esaminandone solamente il contenuto. Per questo un sistema multimediale come quello proposto non potrà effettuare ricerca per contenuto tra media differenti (a parte tra immagini e video in cui può essere possibile confrontare l’immagine con gli screenshot che compongono un video) ma si baserà principalmente sul confronto semantico tra media di tipo diverso e lo combinerà invece con ricerche per metadati e contenuto tra media dello stesso tipo. In questa tesi verranno analizzate le tecnologie utilizzate, le modifiche apportate ai framework esistenti e le novità introdotte per realizzare il sistema generale e in seguito verrà proposta la realizzazione due applicazioni su casi reali per dimostrare l’efficacia di tale sistema.

[Medium-term results after m. vastus medialis obliquus-plasty for lateral patellar dislocation]

Progressive retropatellar arthrosis is often seen in dated rigid distal realignment (i.e. osteotomy of tuberositas) at long-term follow-ups. Therefore, operations for lateral dislocation of the patella are still discussed controversially. Dynamic, proximal realignments seem to have lower rates of arthrosis but higher rates of redislocation. Recently, in anatomic and biomechanic studies, the m. vastus medialis obliquus (vmo) was found to be one of the most important proximal restraints to lateral dislocation of the patella.A total of 28 patients (mean age 21.5 years) were treated between 1994 and 2003 with a plasty of the vmo for lateral patellar dislocation. The technique was performed for most etiologies of femoropatellar instability.For this proximal soft tissue technique, the muscle tendon is detached from its patellar insertion. Subsequently, the tendon is reinserted at the patella 10-15 mm more distally and fixed with Mitek anchors. Full weight bearing in extension is possible immediately after surgery. An active vastus medialis training is started after 6 weeks.Of the patients, 27 were evaluated clinically and radiologically in 2004 (a mean of 5 years postoperatively). A total of 83% of the patients estimated the result to be good or excellent, 10% were satisfied and 7% were discontent. The mean Lysholm-Knee-Score was 83.1 points. Two patients suffered a patella redislocation (7%). A statistically significant improvement of the congruence angle was noted in the radiographs, even in medium-term controls. In 89% of the cases no or only little retropatellar arthrosis was observed. These 5 year results are comparable to those of other techniques for distal or proximal realignments. The rate of redislocation was below average. Compared to the rate of retropatellar arthrosis in long-term results of rigid distal realignment, our patients demonstrated a relative low rate after 5 years. We attribute this to the minimal interference in physiological joint mechanics and to the restored anatomy. In terms of future long-term results, our findings are promising. The idea of a proximal dynamic stabilization and the causal operative approach at the origin of pathology using vmo-plasty was confirmed in recent anatomic and biomechanic studies. Over or under correction of soft tissues could be adapted. More rigid techniques of distal realignment do not allow an adaptation to this extent and can lead to prearthrotic hyperpression in the medial femoropatellar and femorotibial joints.

Ligament balancing in TKA: Evaluation of a force-sensing device and the influence of patellar eversion and ligament release

Ligament balancing in total knee arthroplasty may have an important influence on joint stability and prosthesis lifetime. In order to provide quantitative information and assistance during ligament balancing, a device that intraoperatively measures knee joint forces and moments was developed. Its performance and surgical advantages were evaluated on six cadaver specimens mounted on a knee joint loading apparatus allowing unconstrained knee motion as well as compression and varus-valgus loading. Four different experiments were performed on each specimen. (1) Knee joints were axially loaded. Comparison between applied and measured compressive forces demonstrated the accuracy and reliability of in situ measurements (1.8N). (2) Assessment of knee stability based on condyle contact forces or varus-valgus moments were compared to the current surgical method (difference of varus-valgus loads causing condyle lift-off). The force-based approach was equivalent to the surgical method while the moment-based, which is considered optimal, showed a tendency of lateral imbalance. (3) To estimate the importance of keeping the patella in its anatomical position during imbalance assessment, the effect of patellar eversion on the mediolateral distribution of tibiofemoral contact forces was measured. One fourth of the contact force induced by the patellar load was shifted to the lateral compartment. (4) The effect of minor and major medial collateral ligament releases was biomechanically quantified. On average, the medial contact force was reduced by 20% and 46%, respectively. Large variation among specimens reflected the difficulty of ligament release and the need for intraoperative force monitoring. This series of experiments thus demonstrated the device's potential to improve ligament balancing and survivorship of total knee arthroplasty.

The new Australasian goblin spider genus Prethopalpus (Araneae, Oonopidae)

The new goblin spider genus Prethopalpus is restricted to the Australasian tropics, from the lower Himalayan Mountains in Nepal and India to the Malaysian Peninsula, Indonesia, Papua New Guinea, and Australia. Prethopalpus contains those species with a swollen palpal patella, which is one to two times the size of the femur, together with a cymbium and bulb that is usually separated, although it is largely fused in four species. The type species Opopaea fosuma Burger et al. from Sumatra, and Camptoscaphiella infernalis Harvey and Edward from Western Australia are newly transferred to Prethopalpus. The genus consists of 41 species of which 39 are newly described: P. ilam Baehr (♂, ♀) from Nepal; P. khasi Baehr (♂), P. madurai Baehr (♂), P. mahanadi Baehr (♂, ♀), and P. meghalaya Baehr (♂, ♀) from India; P. bali Baehr (♂), P. bellicosus Baehr and Thoma (♂, ♀), P. brunei Baehr (♂, ♀), P. deelemanae Baehr and Thoma (♂), P. java Baehr (♂, ♀), P. kranzae Baehr (♂), P. kropfi Baehr (♂, ♀), P. leuser Baehr (♂, ♀), P. magnocularis Baehr and Thoma (♂), P. pahang Baehr (♂), P. perak Baehr (♂, ♀), P. sabah Baehr (♂, ♀), P. sarawak Baehr (♂), P. schwendingeri Baehr (♂, ♀), and P. utara Baehr (♂, ♀) from Indonesia and Malaysia; and P. alexanderi Baehr and Harvey (♂), P. attenboroughi Baehr and Harvey (♂), P. blosfeldsorum Baehr and Harvey (♂), P. boltoni Baehr and Harvey (♂, ♀), P. callani Baehr and Harvey (♂, ♀), P. cooperi Baehr and Harvey (♂), P. eberhardi Baehr and Harvey (♂, ♀), P. framenaui Baehr and Harvey (♂, ♀), P. humphreysi Baehr and Harvey (♂, ♀), P. kintyre Baehr and Harvey (♂), P. scanloni Baehr and Harvey (♂), P. pearsoni Baehr and Harvey (♂), P. julianneae Baehr and Harvey (♂), P. maini Baehr and Harvey (♂, ♀), P. marionae Baehr and Harvey (♂, ♀), P. platnicki Baehr and Harvey (♂, ♀), P. oneillae Baehr and Harvey (♂), P. rawlinsoni Baehr and Harvey (♂), and P. tropicus Baehr and Harvey (♂, ♀) from Australia and Papua New Guinea. Three separate keys to species from different geographical regions are provided. Most species are recorded from single locations and only three species are more widely distributed. A significant radiation of blind troglobites comprising 14 species living in subterranean ecosystems in Western Australia is discussed. These include several species that lack abdominal scuta, a feature previously used to define subfamilies of Oonopidae.

ACL reconstruction with physiological graft tension by intraoperative adjustment of the anteroposterior translation to the uninjured contralateral knee.

PURPOSE Fixation of anterior cruciate ligament (ACL) substitutes with non-physiological anteroposterior translation (APT) worsens outcome. The aim was to present a technique for physiological APT adjustment of the transplant in ACL reconstruction and its outcome at midterm. METHODS In a consecutive series of 28 patients (age 32 ± 11 years, 24 male), chronic ACL deficiency was treated by bone-patella-tendon-bone reconstruction. Transplant APT was adjusted to that of the contralateral uninjured ACL, measured 3, 6, and 12 months postoperatively using the Rolimeter. At a median follow-up of 5.3 years (3-8 years), 82% of the patients were re-evaluated with APT measurement and using IKDC-, Tegner-, Lysholm-Scores, conventional radiographs and MRI. RESULTS No differences in APT (mean ± SD) between uninjured and reconstructed knees were observed after adjustment (6 ± 1 versus 6 ± 1 mm, n.s.). Three months postoperatively, a statistically significant increase in APT (7 ± 1 mm) and a further increase at midterm (9 ± 2 mm) were observed. Patients scored "normal" or "nearly normal", respectively, in 79% (IKDC) and 4 (3-9) points (Tegner; median, range) or 89 ± 9 points (Lysholm; mean ± SD). Radiological evaluation showed no, minimal or moderate joint degeneration in 5, 20 and 75% of patients, respectively. MRI confirmed intact ACL transplants in all patients. CONCLUSION ACL reconstruction using the presented technique was considered successful, as patients did not suffer from subjective instability, radiographic analysis did not provide evidence for graft rupture at midterm. However, APT increase and occurrence of degenerative changes in reconstructed knees at the midterm might not be prevented even by restoration of a physiological APT in ACL reconstruction. The Rolimeter can be used for quick and easy intraoperative indirect control of the applied tension to the ACL transplant by measuring the APT to obtain physiological tensioning resulting in a satisfying outcome at midterm. LEVEL OF EVIDENCE IV.

Can 3D ultrasound identify trochlea dysplasia in newborns? Evaluation and applicability of a technique.

Femoro-patellar dysplasia is considered as a significant risk factor of patellar instability. Different studies suggest that the shape of the trochlea is already developed in early childhood. Therefore early identification of a dysplastic configuration might be relevant information for the treating physician. An easy applicable routine screening of the trochlea is yet not available. The purpose of this study was to establish and evaluate a screening method for femoro-patellar dysplasia using 3D ultrasound. From 2012 to 2013 we prospectively imaged 160 consecutive femoro-patellar joints in 80 newborns from the 36th to 61st gestational week that underwent a routine hip sonography (Graf). All ultrasounds were performed by a pediatric radiologist with only minimal additional time to the routine hip ultrasound. In 30° flexion of the knee, axial, coronal, and sagittal reformats were used to standardize a reconstructed axial plane through the femoral condyle and the mid-patella. The sulcus angle, the lateral-to-medial facet ratio of the trochlea and the shape of the patella (Wiberg Classification) were evaluated. In all examinations reconstruction of the standardized axial plane was achieved, the mean trochlea angle was 149.1° (SD 4.9°), the lateral-to-medial facet ratio of the trochlea ratio was 1.3 (SD 0.22), and a Wiberg type I patella was found in 95% of the newborn. No statistical difference was detected between boys and girls. Using standardized reconstructions of the axial plane allows measurements to be made with lower operator dependency and higher accuracy in a short time. Therefore 3D ultrasound is an easy applicable and powerful tool to identify trochlea dysplasia in newborns and might be used for screening for trochlea dysplasia.

Is a Revision a Revision? An Analysis of National Arthroplasty Registries' Definitions of Revision.

BACKGROUND The reported survival of implants depends on the definition used for the endpoint, usually revision. When screening through registry reports from different countries, it appears that revision is defined quite differently. QUESTIONS/PURPOSES The purposes of this study were to compare the definitions of revision among registry reports and to apply common clinical scenarios to these definitions. METHODS We downloaded or requested reports of all available national joint registries. Of the 23 registries we identified, 13 had published reports that were available in English and were beyond the pilot phase. We searched these registries' reports for the definitions of the endpoint, mostly revision. We then applied the following scenarios to the definition of revision and analyzed if those scenarios were regarded as a revision: (A) wound revision without any addition or removal of implant components (such as hematoma evacuation); (B) exchange of head and/or liner (like for infection); (C) isolated secondary patella resurfacing; and (D) secondary patella resurfacing with a routine liner exchange. RESULTS All registries looked separately at the characteristic of primary implantation without a revision and 11 of 13 registers reported on the characteristics of revisions. Regarding the definition of revision, there were considerable differences across the reports. In 11 of 13 reports, the primary outcome was revision of the implant. In one registry the primary endpoint was "reintervention/revision" while another registry reported separately on "failure" and "reoperations". In three registries, the definition of the outcome was not provided, however in one report a results list gave an indication for the definition of the outcome. Wound revision without any addition or removal of implant components (scenario A) was considered a revision in three of nine reports that provided a clear definition on this question, whereas two others did not provide enough information to allow this determination. Exchange of the head and/or liner (like for infection; scenario B) was considered a revision in 11 of 11; isolated secondary patella resurfacing (scenario C) in six of eight; and secondary patella resurfacing with routine liner exchange (scenario D) was considered a revision in nine of nine reports. CONCLUSIONS Revision, which is the most common main endpoint used by arthroplasty registries, is not universally defined. This implies that some reoperations that are considered a revision in one registry are not considered a revision in another registry. Therefore, comparisons of implant performance using data from different registries have to be performed with caution. We suggest that registries work to harmonize their definitions of revision to help facilitate comparisons of results across the world's arthroplasty registries.

Biomechanical Role of Bone Anisotropy Estimated on Clinical CT Scans by Image Registration

Image-based modeling is a popular approach to perform patient-specific biomechanical simulations. Accurate modeling is critical for orthopedic application to evaluate implant design and surgical planning. It has been shown that bone strength can be estimated from the bone mineral density (BMD) and trabecular bone architecture. However, these findings cannot be directly and fully transferred to patient-specific modeling since only BMD can be derived from clinical CT. Therefore, the objective of this study was to propose a method to predict the trabecular bone structure using a µCT atlas and an image registration technique. The approach has been evaluated on femurs and patellae under physiological loading. The displacement and ultimate force for femurs loaded in stance position were predicted with an error of 2.5% and 3.7%, respectively, while predictions obtained with an isotropic material resulted in errors of 7.3% and 6.9%. Similar results were obtained for the patella, where the strain predicted using the registration approach resulted in an improved mean squared error compared to the isotropic model. We conclude that the registration of anisotropic information from of a single template bone enables more accurate patient-specific simulations from clinical image datasets than isotropic model.

Accuracy of cartilage-specific 3-Tesla 3D-DESS magnetic resonance imaging in the diagnosis of chondral lesions: comparison with knee arthroscopy

BACKGROUND Arthroscopy is considered as "the gold standard" for the diagnosis of traumatic intraarticular knee lesions. However, recent developments in magnetic resonance imaging (MRI) now offer good opportunities for the indirect assessment of the integrity and structural changes of the knee articular cartilage. The study was to investigate whether cartilage-specific sequences on a 3-Tesla MRI provide accurate assessment for the detection of cartilage defects. METHODS A 3-Tesla (3-T) MRI combined with three-dimensional double-echo steady-state (3D-DESS) cartilage specific sequences was performed on 210 patients with knee pain prior to knee arthroscopy. Sensitivity, specificity, and positive and negative predictive values of magnetic resonance imaging were calculated and correlated to the arthroscopic findings of cartilaginous lesions. Lesions were classified using the modified Outerbridge classification. RESULTS For the 210 patients (1260 cartilage surfaces: patella, trochlea, medial femoral condyle, medial tibia, lateral femoral condyle, lateral tibia) evaluated, the sensitivities, specificities, positive predictive values, and negative predictive values of 3-T MRI were 83.3, 99.8, 84.4, and 99.8 %, respectively, for the detection of grade IV lesions; 74.1, 99.6, 85.2, and 99.3 %, respectively, for grade III lesions; 67.9, 99.2, 76.6, and 98.2 %, respectively, for grade II lesions; and 8.8, 99.5, 80, and 92 %, respectively, for grade I lesions. CONCLUSIONS For grade III and IV lesions, 3-T MRI combined with 3D-DESS cartilage-specific sequences represents an accurate diagnostic tool. For grade II lesions, the technique demonstrates moderate sensitivity, while for grade I lesions, the sensitivity is limited to provide reliable diagnosis compared to knee arthroscopy.

The role of LMX1B and PITX2 in anterior segment development and adult ocular function

Several congenital syndromes associated with anterior segment (AS) anomalies can lead to impaired vision and glaucoma, such as nail-patella syndrome (NPS), caused by mutations in the LIM homeodomain transcription factor LMX1B and Axenfeld-Rieger's syndrome (ARS), caused by mutations in the bicoid-related homeodomain transcription factor PITX2. Targeted mutations in lmx1b and pitx2 and RNA in situ analysis reveal that both genes are required for AS development and are co-expressed within the periocular mesenchyme, suggesting they participate in a shared genetic pathway. Lmx1b homozygous mutants display iris and corneal stroma hypoplasia, and defects in ciliary body formation. In contrast, pitx2 homozygous mutants exhibit a more severe phenotype: the AS chamber, corneal endothelium, and extraocular muscles (EOM) fail to develop. The absence of EOM in pitx2 mutants suggests pitx2 acts upstream of lmx1b, or that other lmx1b family members, such as lmx1a, can compensate for lmx1b function. Lmxla/lmx1b double homozygous mutants have a reduced capacity to generate EOM, implying that lmx1 gene products have a redundant function in EOM development and that lmx1 family members may act downstream of pitx2. However, analysis of pitx2 expression in the AS tissues of lmx1b mutants and reciprocal studies of lmx1b expression in pitx2 mutants indicate that these genes do not function in a simple linear pathway. Instead, lmx1b and pitx2 may regulate a shared set of downstream targets or both genes may work in parallel transcribing unique targets required for a common biological process. Ultrastructural analysis of lmx1b and pitx2 mutant corneas indicates that collagen fibrillogenesis is perturbed, revealing a common role for both genes in the deposition of extracellular matrix. Furthermore, lmx1b/pitx2 double heterozygotes develop corneal opacities not observed in single heterozygotes demonstrating that lmx1b and pitx2 genetically interact. Data suggests that defects in the basement membrane of the corneal endothelium underlie the opacities observed in double heterozygotes. Additionally, double heterozygotes develop anterior synechias that occlude the trabecular meshwork, potentially blocking aqueous humor drainage. These data suggest that lmx1b and pitx2 are responsible for ECM deposition in multiple cell types and imply that such defects may contribute to the glaucomas observed in NPS and ARS patients. ^