Who is the corporate entrepreneur? Insights from opportunity discovery and Creation Theory

Recent research has begun to address and even compare nascent entrepreneurship and nascent corporate entrepreneurship. An opportunity based view holds great potential to integrate both streams of research, but also presents challenges in how we define corporate entrepreneurship. We extend (corporate) entrepreneurship literature to the opportunity identification phase by providing a framework to classify different types of corporate entrepreneurship. Through analysis of a large dataset on nascent (corporate) entrepreneurship (PSEDII) we show that these corporate entrepreneurs differ largely from each other in terms of human capital. Prior studies have indicated that independent and corporate entrepreneurs pursue different types of opportunities and utilize different strategies. Our findings from the opportunity identification phase challenge those differences and seem to indicate a difference between the opportunities corporate entrepreneurs identify versus the opportunities they exploit.

Resource constraints in innovation : the role of bricolage in new venture creation and firm development

The emerging theory of ‘bricolage’ as a resource behaviour represents an attempt to address the central entrepreneurship research problem of making systematic sense of entrepreneurs that sometimes manage to create significant new economic activity under what appears to be severe resource constraints (Baker & Nelson 2005). However, despite growing interest in bricolage there is little large scale empirical evidence about the effectiveness and outcomes of using bricolage processes while developing innovative outcomes in nascent and young firms. In this research we test bricolage using different forms of innovation using data from the Comprehensive Australian Study of Entrepreneurial Emergence (CAUSEE) project. Our results indicate overall positive results of bricolage with all forms of innovativeness. A discussion of the results and recommended future research is provided.

Relationships between rainfall intensity, duration and suspended particle washoff from an urban road surface

A basic understanding of the relationships between rainfall intensity, duration of rainfall and the amount of suspended particles in stormwater runoff generated from road surfaces has been gained mainly from past washoff experiments using rainfall simulators. Simulated rainfall was generally applied at constant intensities, whereas rainfall temporal patterns during actual storms are typically highly variable. This paper discusses a rationale for the application of the constant-intensity washoff concepts to actual storm event runoff. The rationale is tested using suspended particle load data collected at a road site located in Toowoomba, Australia. Agreement between the washoff concepts and measured data is most consistent for intermediate-duration storms (duration <5 h and >1 h). Particle loads resulting from these storm events increase linearly with average rainfall intensity. Above a threshold intensity, there is evidence to suggest a constant or plateau particle load is reached. The inclusion of a peak discharge factor (maximum 6 min rainfall intensity) enhances the ability to predict particle loads.

Ezine and iRadio as knowledge creation metaphors for scaffolding learning in physical and virtual learning spaces

eZine and iRadio represent metaphors for multimedia communication on the Internet. Participating students experience a simulated Internet publishing environment in both their classroom and virtual learning environment. This chapter presents an autoethnographic account highlighting the voices of the learning designer and the teacher and provides evidence of the planning and implementation of two tertiary music elective courses over three iterations of each course. A blended learning environment was incorporated within each elective music course and a collaborative approach to development between lecturers, tutors, learning and technological designers using an iterative research design. The research suggests that learning design which provides real world examples and resources integrating authentic task design into their unit can provide meaningful and engaging experiences for students. The dialogue between learning designers and teachers and iterative review of the learning process and student outcomes, we believe, has engaged students meaningfully to achieve transferable learning outcomes.

The symbiosis of improvised and rehearsed elements in the creation of contemporary jazz ensemble music

This research investigates the symbiotic relationship between composition and improvisation and the notion of improvisation itself. With a specific interest in developing, extending and experimenting with the relationship of improvisation within predetermined structures, the creative work component of this research involved composing six new works with varying approaches for The Andrea Keller Quartet and guest improvisers, for performance on a National Australian tour. This is documented in the CD recording Galumphing Round the Nation - Collaborations Tour 2009. The exegesis component is intended to run alongside the creative work and discusses the central issues surrounding improvisation in an ensemble context and the subject of composing for improvisers. Specifically, it questions the notion that when music emphasises a higher ratio of spontaneous to pre-determined elements, and is exposed to the many variables of a performance context, particularly through its incorporation of visitant improvisers, the resultant music should potentially be measurably altered with each performance. This practice-led research demonstrates the effect of concepts such as individuality, variability within context, and the interactive qualities of contemporary jazz ensemble music. Through the analysis and comparison of the treatment of the six pieces over thirteen performances with varying personnel, this exegesis proposes that, despite the expected potential for spontaneity in contemporary jazz music, the presence of established patterns, the desire for familiarity and the intuitive tendency towards accepted protocols ensure that the music which emerges is not as mutable as initially anticipated.

SwarmPS: Rapid, semi-automated single particle selection software

Single particle analysis (SPA) coupled with high-resolution electron cryo-microscopy is emerging as a powerful technique for the structure determination of membrane protein complexes and soluble macromolecular assemblies. Current estimates suggest that ∼104–105 particle projections are required to attain a 3 Å resolution 3D reconstruction (symmetry dependent). Selecting this number of molecular projections differing in size, shape and symmetry is a rate-limiting step for the automation of 3D image reconstruction. Here, we present SwarmPS, a feature rich GUI based software package to manage large scale, semi-automated particle picking projects. The software provides cross-correlation and edge-detection algorithms. Algorithm-specific parameters are transparently and automatically determined through user interaction with the image, rather than by trial and error. Other features include multiple image handling (∼102), local and global particle selection options, interactive image freezing, automatic particle centering, and full manual override to correct false positives and negatives. SwarmPS is user friendly, flexible, extensible, fast, and capable of exporting boxed out projection images, or particle coordinates, compatible with downstream image processing suites.

A social marketing approach to value creation in a Well-Women’s health service

Understanding consumer value is imperative in health care as the receipt of value drives the demand for health care services. While there is increasing research into health-care that adopts an economic approach to value, this paper investigates a non-financial exchange context and uses an experiential approach to value, guided by a social marketing approach to behaviour change. An experiential approach is deemed more appropriate for government health-care services that are free and for preventative rather than treatment purposes. Thus instead of using an illness-paradigm to view health services outcomes, we adopt a wellness paradigm. Using qualitative data gathered during 25 depth interviews the authors demonstrate how social marketing thinking has guided the identification of six themes that represent four dimensions of value (functional, emotional, social and altruistic) evident during the health care consumption process of a free government service.

Train service timetabling in railway open markets by particle swarm optimisation

Railway timetabling is an important process in train service provision as it matches the transportation demand with the infrastructure capacity while customer satisfaction is also considered. It is a multi-objective optimisation problem, in which a feasible solution, rather than the optimal one, is usually taken in practice because of the time constraint. The quality of services may suffer as a result. In a railway open market, timetabling usually involves rounds of negotiations among a number of self-interested and independent stakeholders and hence additional objectives and constraints are imposed on the timetabling problem. While the requirements of all stakeholders are taken into consideration simultaneously, the computation demand is inevitably immense. Intelligent solution-searching techniques provide a possible solution. This paper attempts to employ a particle swarm optimisation (PSO) approach to devise a railway timetable in an open market. The suitability and performance of PSO are studied on a multi-agent-based railway open-market negotiation simulation platform.

Coupling hybrid-game strategies with particle swarm optimisation for multi-objective high lift systems design optimisation

This paper investigates the High Lift System (HLS) application of complex aerodynamic design problem using Particle Swarm Optimisation (PSO) coupled to Game strategies. Two types of optimization methods are used; the first method is a standard PSO based on Pareto dominance and the second method hybridises PSO with a well-known Nash Game strategies named Hybrid-PSO. These optimization techniques are coupled to a pre/post processor GiD providing unstructured meshes during the optimisation procedure and a transonic analysis software PUMI. The computational efficiency and quality design obtained by PSO and Hybrid-PSO are compared. The numerical results for the multi-objective HLS design optimisation clearly shows the benefits of hybridising a PSO with the Nash game and makes promising the above methodology for solving other more complex multi-physics optimisation problems in Aeronautics.

Quantification of particle emission characteristics and development of an emission model for use in transport microenvironments affected by traffic emissions

Vehicle emitted particles are of significant concern based on their potential to influence local air quality and human health. Transport microenvironments usually contain higher vehicle emission concentrations compared to other environments, and people spend a substantial amount of time in these microenvironments when commuting. Currently there is limited scientific knowledge on particle concentration, passenger exposure and the distribution of vehicle emissions in transport microenvironments, partially due to the fact that the instrumentation required to conduct such measurements is not available in many research centres. Information on passenger waiting time and location in such microenvironments has also not been investigated, which makes it difficult to evaluate a passenger’s spatial-temporal exposure to vehicle emissions. Furthermore, current emission models are incapable of rapidly predicting emission distribution, given the complexity of variations in emission rates that result from changes in driving conditions, as well as the time spent in driving condition within the transport microenvironment. In order to address these scientific gaps in knowledge, this work conducted, for the first time, a comprehensive statistical analysis of experimental data, along with multi-parameter assessment, exposure evaluation and comparison, and emission model development and application, in relation to traffic interrupted transport microenvironments. The work aimed to quantify and characterise particle emissions and human exposure in the transport microenvironments, with bus stations and a pedestrian crossing identified as suitable research locations representing a typical transport microenvironment. Firstly, two bus stations in Brisbane, Australia, with different designs, were selected to conduct measurements of particle number size distributions, particle number and PM2.5 concentrations during two different seasons. Simultaneous traffic and meteorological parameters were also monitored, aiming to quantify particle characteristics and investigate the impact of bus flow rate, station design and meteorological conditions on particle characteristics at stations. The results showed higher concentrations of PN20-30 at the station situated in an open area (open station), which is likely to be attributed to the lower average daily temperature compared to the station with a canyon structure (canyon station). During precipitation events, it was found that particle number concentration in the size range 25-250 nm decreased greatly, and that the average daily reduction in PM2.5 concentration on rainy days compared to fine days was 44.2 % and 22.6 % at the open and canyon station, respectively. The effect of ambient wind speeds on particle number concentrations was also examined, and no relationship was found between particle number concentration and wind speed for the entire measurement period. In addition, 33 pairs of average half-hourly PN7-3000 concentrations were calculated and identified at the two stations, during the same time of a day, and with the same ambient wind speeds and precipitation conditions. The results of a paired t-test showed that the average half-hourly PN7-3000 concentrations at the two stations were not significantly different at the 5% confidence level (t = 0.06, p = 0.96), which indicates that the different station designs were not a crucial factor for influencing PN7-3000 concentrations. A further assessment of passenger exposure to bus emissions on a platform was evaluated at another bus station in Brisbane, Australia. The sampling was conducted over seven weekdays to investigate spatial-temporal variations in size-fractionated particle number and PM2.5 concentrations, as well as human exposure on the platform. For the whole day, the average PN13-800 concentration was 1.3 x 104 and 1.0 x 104 particle/cm3 at the centre and end of the platform, respectively, of which PN50-100 accounted for the largest proportion to the total count. Furthermore, the contribution of exposure at the bus station to the overall daily exposure was assessed using two assumed scenarios of a school student and an office worker. It was found that, although the daily time fraction (the percentage of time spend at a location in a whole day) at the station was only 0.8 %, the daily exposure fractions (the percentage of exposures at a location accounting for the daily exposure) at the station were 2.7% and 2.8 % for exposure to PN13-800 and 2.7% and 3.5% for exposure to PM2.5 for the school student and the office worker, respectively. A new parameter, “exposure intensity” (the ratio of daily exposure fraction and the daily time fraction) was also defined and calculated at the station, with values of 3.3 and 3.4 for exposure to PN13-880, and 3.3 and 4.2 for exposure to PM2.5, for the school student and the office worker, respectively. In order to quantify the enhanced emissions at critical locations and define the emission distribution in further dispersion models for traffic interrupted transport microenvironments, a composite line source emission (CLSE) model was developed to specifically quantify exposure levels and describe the spatial variability of vehicle emissions in traffic interrupted microenvironments. This model took into account the complexity of vehicle movements in the queue, as well as different emission rates relevant to various driving conditions (cruise, decelerate, idle and accelerate), and it utilised multi-representative segments to capture the accurate emission distribution for real vehicle flow. This model does not only helped to quantify the enhanced emissions at critical locations, but it also helped to define the emission source distribution of the disrupted steady flow for further dispersion modelling. The model then was applied to estimate particle number emissions at a bidirectional bus station used by diesel and compressed natural gas fuelled buses. It was found that the acceleration distance was of critical importance when estimating particle number emission, since the highest emissions occurred in sections where most of the buses were accelerating and no significant increases were observed at locations where they idled. It was also shown that emissions at the front end of the platform were 43 times greater than at the rear of the platform. The CLSE model was also applied at a signalled pedestrian crossing, in order to assess increased particle number emissions from motor vehicles when forced to stop and accelerate from rest. The CLSE model was used to calculate the total emissions produced by a specific number and mix of light petrol cars and diesel passenger buses including 1 car travelling in 1 direction (/1 direction), 14 cars / 1 direction, 1 bus / 1 direction, 28 cars / 2 directions, 24 cars and 2 buses / 2 directions, and 20 cars and 4 buses / 2 directions. It was found that the total emissions produced during stopping on a red signal were significantly higher than when the traffic moved at a steady speed. Overall, total emissions due to the interruption of the traffic increased by a factor of 13, 11, 45, 11, 41, and 43 for the above 6 cases, respectively. In summary, this PhD thesis presents the results of a comprehensive study on particle number and mass concentration, together with particle size distribution, in a bus station transport microenvironment, influenced by bus flow rates, meteorological conditions and station design. Passenger spatial-temporal exposure to bus emitted particles was also assessed according to waiting time and location along the platform, as well as the contribution of exposure at the bus station to overall daily exposure. Due to the complexity of the interrupted traffic flow within the transport microenvironments, a unique CLSE model was also developed, which is capable of quantifying emission levels at critical locations within the transport microenvironment, for the purpose of evaluating passenger exposure and conducting simulations of vehicle emission dispersion. The application of the CLSE model at a pedestrian crossing also proved its applicability and simplicity for use in a real-world transport microenvironment.

Value co-creation in social marketing wellness services

Customer perceived value is concerned with the experiences of consumers when using a service and is often referred to in the context of service provision or on the basis of service quality (Auh, et al., 2007; Chang, 2008; Jackson, 2007; Laukkanen, 2007; Padgett & Mulvey, 2007; Shamdasani, Mukherjee & Malhotra, 2008). Understanding customer perceived value has benefits for social marketing and allows scholars and practitioners alike to identify why consumers engage in positive social behaviours through the use of services. Understanding consumers’ use of wellness services in particular is important, because the use of wellness services demonstrates the fulfilment of social marketing aims; performing pro-active, positive social behaviours that are of benefit to the individual and to society (Andreasen, 1994). As consumers typically act out of self-interest (Rothschild, 1999), this research posits that a value proposition must be made to consumers in order to encourage behavioural change. Thus, this research seeks to identify how value is created for consumers of wellness services in social marketing. This results in the overall research question of this research: How is value created in social marketing wellness services? A traditional method towards understanding value has been the adoption of an economic approach, which considers the utility gained and where value is a direct outcome of a cost-benefit analysis (Payne & Holt, 1999). However, there has since been a shift towards the adoption of an experiential approach in understanding value. This experiential approach considers the consumption experience of the consumer which extends beyond the service exchange and includes pre- and post-consumption stages (Russell-Bennett, Previte & Zainuddin, 2009). As such, this research uses an experiential approach to identify the value that exists in social marketing wellness services. Four dimensions of value have been commonly conceptualised and identified in the commercial marketing literature; functional, emotional, social, and altruistic value (Holbrook, 1994; Sheth, Newman & Gross, 1991; Sweeney & Soutar, 2001). It is not known if these value dimensions also exist in social marketing. In addition, sources of value said to influence value dimensions have been conceptualised in the literature. Sources of value such as information, interaction, environment, service, customer co-creation, and social mandate have been conceptually identified both in the commercial and social marketing literature (Russell-Bennet, Previte & Zainuddin, 2009; Smith & Colgate, 2007). However, it is not clear which sources of value contribute to the creation of value for users of wellness services. Thus, this research seeks to explore these relationships. This research was conducted using a wellness service context, specifically breast cancer screening services. The primary target consumer of these services is women aged 50 to 69 years old (inclusive) who have never been diagnosed with breast cancer. It is recommended that women in this target group have a breast screen every 2 years in order to achieve the most effective medical outcomes from screening. A two-study mixed method approach was utilised. Study 1 was a qualitative exploratory study that analysed individual-depth interviews with 25 information-rich respondents. The interviews were transcribed verbatim and analysed using NVivo 8 software. The qualitative results provided evidence of the existence of the four value dimensions in social marketing. The results also allowed for the development of a typology of experiential value by synthesising current understanding of the value dimensions, with the activity aspects of experiential value identified by Holbrook (1994) and Mathwick, Malhotra and Rigdon (2001). The qualitative results also provided evidence for the existence of sources of value in social marketing, namely information, interaction, environment and consumer participation. In particular, a categorisation of sources of value was developed as a result of the findings from Study 1, which identify organisational, consumer, and third party sources of value. A proposed model of value co-creation and a set of hypotheses were developed based on the results of Study 1 for further testing in Study 2. Study 2 was a large-scale quantitative confirmatory study that sought to test the proposed model of value co-creation and the hypotheses developed. An online-survey was administered Australia-wide to women in the target audience. A response rate of 20.1% was achieved, resulting in a final sample of 797 useable responses after removing ineligible respondents. Reliability and validity analyses were conducted on the data, followed by Exploratory Factor Analysis (EFA) in PASW18, followed by Confirmatory Factor Analysis (CFA) in AMOS18. Following the preliminary analyses, the data was subject to Structural Equation Modelling (SEM) in AMOS18 to test the path relationships hypothesised in the proposed model of value creation. The SEM output revealed that all hypotheses were supported, with the exception of one relationship which was non-significant. In addition, post hoc tests revealed seven further significant non-hypothesised relationships in the model. The quantitative results show that organisational sources of value as well as consumer participation sources of value influence both functional and emotional dimensions of value. The experience of both functional and emotional value in wellness services leads to satisfaction with the experience, followed by behavioural intentions to perform the behaviour and use the service again. One of the significant non-hypothesised relationships revealed that emotional value leads to functional value in wellness services, providing further empirical evidence that emotional value features more prominently than functional value for users of wellness services. This research offers several contributions to theory and practice. Theoretically, this research addresses a gap in the literature by using social marketing theory to provide an alternative method of understanding individual behaviour in a domain that has been predominantly investigated in public health. This research also clarifies the concept of value and offers empirical evidence to show that value is a multi-dimensional construct with separate and distinct dimensions. Empirical evidence for a typology of experiential value, as well as a categorisation of sources of value is also provided. In its practical contributions, this research identifies a framework that is the value creation process and offers health services organisations a diagnostic tool to identify aspects of the service process that facilitate the value creation process.