Estimated metabolizable energy yields of perennial and annual grass swards compared with those of spring barley and oat

Selostus: Yksi- ja monivuotisen nurmen, ohran sekä kauran muuntokelpoisen energian sadot märehtijän rehutuksessa lajikekokeiden tuloksista estimoituina

Morphogenetic characteristics and management of Tanzania grass

The objective of this work was to evaluate the effect of grazing interval and period of evaluation over tissue turnover in Tanzania grass pastures (Panicum maximum cv. Tanzania) and to ascertain if herbage accumulation rate can be used as a criterion to establish a defoliation schedule for this grass in Southeast of Brazil. A randomized block design with a split-plot arrangement was used. The effect of three grazing intervals was evaluated within seven periods between October 1995 and September 1996. Responses monitored were leaf and stem elongation rates, leaf senescence rate, stem length, and tiller density. Net herbage accumulation rate was calculated using tissue turnover data. The grazing intervals for Tanzania grass should be around 38 days between October and April (spring and early autumn) and 28 days during the reproductive phase of the grass (April/May). Between May and September (late autumn and winter), grazing interval should be around 48 days. Herbage accumulation rate is not a good criterion to establish defoliation time for Tanzania grass. Studies on the effects of stem production in grazing efficiency, animal intake and forage quality are needed to improve Tanzania grass management.

Agreed-upon procedures report on the City of Blue Grass, Iowa for the period July 1, 2013 through June 30, 2014

Agreed-upon procedures report on the City of Blue Grass, Iowa for the period July 1, 2013 through June 30, 2014

Variation in biomass related variables of reed canary grass

Selostus: Ruokohelven biomassan tuotantoon vaikuttavien ominaisuuksien vaihtelu

Elephant grass genotypes for bioenergy production by direct biomass combustion

The objective of this work was to evaluate elephant grass (Pennisetum purpureum Schum.) genotypes for bioenergy production by direct biomass combustion. Five elephant grass genotypes grown in two different soil types, both of low fertility, were evaluated. The experiment was carried out at Embrapa Agrobiologia field station in Seropédica, RJ, Brazil. The design was in randomized complete blocks, with split plots and four replicates. The genotypes studied were Cameroon, Bag 02, Gramafante, Roxo and CNPGL F06-3. Evaluations were made for biomass production, total biomass nitrogen, biomass nitrogen from biological fixation, carbon/nitrogen and stem/leaf ratios, and contents of fiber, lignin, cellulose and ash. The dry matter yields ranged from 45 to 67 Mg ha-1. Genotype Roxo had the lowest yield and genotypes Bag 02 and Cameroon had the highest ones. The biomass nitrogen accumulation varied from 240 to 343 kg ha-1. The plant nitrogen from biological fixation was 51% in average. The carbon/nitrogen and stem/leaf ratios and the contents of fiber, lignin, cellulose and ash did not vary among the genotypes. The five genotypes are suitable for energy production through combustion.

Desiccation, postharvest maturity and seed aging of tall oat-grass

The objectives of this work were to determine whether and at which seed physiological maturity stage the diquat desiccant affects the tall oat-grass (Arrhenatherum elatius) seed quality and yield, as well as the proper storage period between harvest and sowing. Diquat desiccation was evaluated in applications during milk or dough seed maturation stages. Seeds conventionally produced and stored under traditional storage conditions were used for the analyses. Seed samples were drawn every 30th day after harvest (DAH). After the 240th DAH, samples were drawn every 90th day up the to 690th DAH. The highest yield were obtained by desiccation applied at the beginning of the seed dough stage, with a satisfactory seed quality. Both final germination and seedling growth parameters achieved their maximum values between 180th and 240th DAH. Oat-grass seeds preserved satisfactory level of final germination (75%) up to 420th DAH. The application of diquat desiccant at the beginning of seed dough maturity stage can be a good solution for seed production of tall oat-grass. Early spring is the best sowing period for freshly harvested seeds of tall oat-grass regarding germination and seedling growth.

Genomic behavior of hybrid combinations between elephant grass and pearl millet

The objective of this work was to evaluate the genomic behavior of hybrid combinations between elephant grass (Pennisetum purpureum) and pearl millet (P. glaucum). Tetraploid (AAA'B) and pentaploid (AA'A'BB) chromosome races resulting from the backcross of the hexaploid hybrid to its parents elephant grass (A'A'BB) and pearl millet (AA) were analyzed as to chromosome number and DNA content. Genotypes of elephant grass, millet, and triploid and hexaploid induced hybrids were compared. Pentaploid and tetraploid genomic combinations showed high level of mixoploidy, in discordance with the expected somatic chromosome set. The pentaploid chromosome number ranged from 20 to 34, and the tetraploid chromosome number from 16 to 28. Chromosome number variation was higher in pentaploid genomic combinations than in tetraploid, and mixoploidy was observed among hexaploids. Genomic combinations 4x and 5x are mixoploid, and the variation of chromosome number within chromosomal race 5x is greater than in 4x.

Dry matter production of Tanzania grass as a function of agrometeorological variables

The objective of this work was to develop and validate linear regression models to estimate the production of dry matter by Tanzania grass (Megathyrsus maximus, cultivar Tanzania) as a function of agrometeorological variables. For this purpose, data on the growth of this forage grass from 2000 to 2005, under dry‑field conditions in São Carlos, SP, Brazil, were correlated to the following climatic parameters: minimum and mean temperatures, degree‑days, and potential and actual evapotranspiration. Simple linear regressions were performed between agrometeorological variables (independent) and the dry matter accumulation rate (dependent). The estimates were validated with independent data obtained in São Carlos and Piracicaba, SP, Brazil. The best statistical results in the development and validation of the models were obtained with the agrometeorological parameters that consider thermal and water availability effects together, such as actual evapotranspiration, accumulation of degree‑days corrected by water availability, and the climatic growth index, based on average temperature, solar radiation, and water availability. These variables can be used in simulations and models to predict the production of Tanzania grass.

Forage production of elephant grass under intermittent stocking

The objective of this work was to evaluate the dry matter production of elephant grass (Pennisetum purpureum) genotypes, managed under intermittent stocking. A completely randomized design was used, with two genotypes and three replicates. The treatments consisted of factorial combinations (2x2x2) of genotypes ('BRS Kurumi' and the clone CNPGL 00‑1‑3), two light interception levels (LI) at the onset of grazing (90 and 95%), and two post‑grazing canopy heights (30 and 50 cm). A total of 24 Holstein x Zebu crossbred heifers were used. The stocking density varied in order to finish the grazing periods in two days. The interval between the defoliation, based on 95% LI, resulted in a higher leaf mass per grazing cycle. The post‑grazing height of 30 cm did not affect the number of grazing cycles but provided a greater herbage accumulation rate. The cultivar BRS Kurumi has higher pasture growth, lower rest period, and greater number of grazing cycles, which results in increased forage production in the growing season.

Yield and mineral nutrition of soybean, maize, and Congo signal grass as affected by limestone and slag

The objective of this work was to evaluate the efficiency of superficial application of limestone and slag, and their effects on soil chemical attributes and on yield and mineral nutrition of soybean, maize, and Congo signal grass (Urochloa ruziziensis). The experiment was carried out in a Rhodic Hapludox under no tillage system. The treatments consisted of the use of limestone or slag (silicates of calcium and magnesium) to correct soil acidity, and of a control treatment without the use of soil correctives. Rates were calculated in order to raise soil base saturation up to 70%. Soybean was sown in November 2006 and maize in December 2007. Congo signal grass was sown right after the harvests of soybean and maize, and it was cropped during the off-seasons. Soil chemical attributes were evaluated at 6, 12, and 18 months after the application of the corrective materials. Slag is an efficient source for soil acidity correction, being able to raise the exchangeable base levels in the soil profile faster than lime. Both limestone and slag increase dry matter yield of Congo signal grass, and grain yield of soybean and maize. Slag is more effective in improving maize grain yield.

Evaluation of reed canary grass for different end-uses and in breeding

Selostus: Ruokohelven soveltuvuus non-food-, rehun- ja siementuotantoon

Annual and seasonal changes in production and composition of grazed clover-grass mixtures in organic farming

Selostus: Alsike-, puna- ja valkoapilan vaikutus laitumen tuottoon luonnonmukaisessa tuotannossa

High-Performance-Tensile-Strength Alpha-Grass Reinforced Starch-Based Fully Biodegradable Composites

Though there has been a great deal of work concerning the development of natural fibers in reinforced starch-based composites, there is still more to be done. In general, cellulose fibers have lower strength than glass fibers; however, their specific strength is not far from that of fiberglass. In this work, alpha-fibers were obtained from alpha-grass through a mild cooking process. The fibers were used to reinforce a starch-based biopolymer. Composites including 5 to 35% (w/w) alpha-grass fibers in their formulation were prepared, tested, and subsequently compared with those of wood- and fiberglass-reinforced polypropylene (PP). The term “high-performance” refers to the tensile strength of the studied composites and is mainly due to a good interphase, a good dispersion of the fibers inside the matrix, and a good aspect ratio. The tensile strength of the composites showed a linear evolution for fiber contents up to 35% (w/w). The strain at break of the composites decreased with the fiber content and showed the stiffening effects of the reinforcement. The prepared composites showed high mechanical properties, even approaching those of glass fiber reinforced composites