Blendas de PVC/PCL foto/termo e biotratadas com fungos de solo (Phanerochaete chrysosporium e Aspergillus fumigatus)

Pós-graduação em Ciências Biológicas (Microbiologia Aplicada) - IBRC

Fabrication and Characterization of PZT-PAni/PVDF Based Nanocomposite

This work presents the preparation and characterization of PZT ceramic obtained by the polymeric precursor method (PPM). The influence of the synthesis method on the grain size and the morphology are also object of study. The fabrication and characterization of composite films with 0-3 connectivity, immersing nanoparticles of PZT into the non-polar poly(vinylidene fluoride) -PVDF as the polymer matrix were presented. For comparison there are results obtained with composite samples made of ceramic particles unrecovered and recovered with a conducting polymer, the polyaniline (PAni).

Cell Adhesion to Plasma-Coated PVC

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação do ciclo de vida dos tubos de PVC produzidos no Brasil

Naturally characterizes the human being the interference in the environment to ensure their survival and also convenience. After numerous environmental accidents caused by unbridled pursuit of this goal, the concern about providing for current needs without compromising the ability of the future generations to supply their own, gained space. In order to contribute to sustainable development the Life Cycle Assessment (LCA) was implemented. This tool is based on the concept that if the environmental impacts of a product or service are known, it is possible to take better decisions concerning its environmental aspects. The purpose of this research is to conduct the LCA of polyvinyl chloride (PVC), the world’s second most consumed thermoplastic. The methodology described in NBR ISO 14040 and NBR ISO 14044 was followed. As a result, the LCA of polyvinyl chloride produced in Brazil was obtained, and, therefore, the inventory of the product in question adapted to Brazilian reality. The research can be applied to various studies considering that actions were taken to ensure that it represents the Brazilian reality. Moreover, the procedures were described to guarantee the greatest transparency possible

Análise da eficiência do cobre, alumínio e PVC como condutores hidráulicos em aquecedores solares

One of society concerns are preserving the environment and the growing energy demand. These two issues are in conflict since most of the energy used today in some way harms the environment. Then is essential to develop and implement ways to clean and renewable energy. In this way, solar energy stands out as a source of clean energy, renewable, abundant and acessible. Solar energy can be harnessed by photovoltaic cells or by solar collectors. The aim of this article is analysethe yield of the solar heather assembled with hydraulic conductive and plastic bottles using three different materials for hydraulic conductors, in order to compare these efficiences and analyze material which has the best cost-benefit in this type of application. The materials analyzed in this study were copper, aluminum and PVC. For this analysis were assembled three alike solar heaters using each one of these materials, and were done several series of measurements of the temperature water output to each heat with flow between 10 and 30 liters per hour. With these data we can analyze the yield and the performance of copper, aluminum and PVC in this application. So we can conclude that aluminum has a higher efficiency, followed by PVC, and the copper had the lowest efficiency. This behavior kept for all values of flow rates examined

Análise comparativa entre os aquecedores solares industrial e os construídos com garrafas pet e canos de pvc, cobre e alumínio

Este trabalho apresenta o uso de energia solar, para o aquecimento de água, através da análise de aquecedores solares industrial e os construídos com garrafas PET com canos condutores de água de cobre, alumínio e PVC, instalados no Centro de Energias Renováveis - CER, do Campus de Engenharia Guaratinguetá. A análise foi realizada com a ajuda de sensores Termopar, software - Contemp View Simple, para obtenção de dados, software Teamviewer para acesso remoto. Sendo feitas as medições concluiu-se qual é o aquecedor mais eficiente a ser utilizado, sempre tendo como objetivo o aproveitamento da energia renovável usando a radiação solar

Plasma Treatment to Improve the Surface Properties of Recycled Post-Consumer PVC

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Perda de carga em reduções concêntricas de PVC

In the pumping pipelines the located load losses are very important since they have direct influence on hydraulic design of an irrigation system, especially regarding the concentric reducers used in the distribution lines. Hence this work was conducted in the Laboratório de Hidráulica do Centro Federal de Educação Tecnológica de Uberaba. We analyzed 03 concentric reducers PVC 75 x 50 mm, 50 mm and 35 x 35 x 1 "operating at different flow rates. The performance of the tests with the variation of flow in every situation possible to obtain equations to estimate the loss. The equation models presented a high setting, thus enabling the determination of the localized head loss in a situation closer to field reality. For the reduction of 75 x 50 x 35 mm and 50 mm at a flow rate 16.97 m³ h-1 the pressure drop reduction was obtained respectively 0.9263 and 2.7408 mca. To the reduction of 35 x 1 "at a flow rate of 6.02 m³ h-1 was obtained 2.9304 mca pressure drop reduction. The located losses produced by these reductions are relatively high and should be considered with great discretion in hydraulic design of the irrigation system.

Influence of the deposition parameters on the morphology and electrical conductivity of PANI/PSS self-assembled films

The influence of deposition parameters, namely polymer concentration and pH of the deposition solution, cleaning, and drying steps on the morphology and electrical characteristics of polyaniline and sulfonated polystyrene (PANI/PSS) nanostructured films deposited by the self-assembly technique is evaluated by UV-Vis spectroscopy, optical and atomic force microscopy, and electrical resistance measurements. It is found that stirring the cleaning solution during the cleaning step is crucial for obtaining homogenous films. Stirring of the cleaning solution also influences the amount of PANI adsorbed in the films. In this regard, the drying process seems to be less critical since PANI amount and film thickness are similar in films dried with N-2 flow or with an absorbent tissue. It is observed, however, that drying with N-2 flow results in rougher films. As an additional point, an assessment of the influence of the deposition method (manual versus mechanical) on the film characteristics was carried out. A significant difference on the amount of PANI and film thickness between films prepared by different human operators and by a homemade mechanical device was observed. The variability in film thickness and PANI adsorbed amount is smaller in films mechanically assembled. (c) 2007 Elsevier B.V. All rights reserved.

PVC orientado-avaliação de processo de orientação e das propriedades mecânicas em função da razão de estiramento

Este artigo avalia o efeito da "orientação molecular" nas propriedades mecânicas do PVC Rígido. Introduz-se o tema associando-o à aplicação do PVC Orientado em sistemas de tubulações, considerando a importância do nível de gelificação na qualidade desses produtos. É descrito e testado um método experimental de orientação mono-axial em um extrudado e materiais com diferentes razões de estiramento são produzidos para avaliação de propriedades mecânicas. Aumentando a razão de estiramento, há ganhos principalmente no limite de resistência à tração, além do módulo elástico sob tração e tenacidade. Por outro lado, a deformação na ruptura é reduzida.

Preparazione e caratterizzazione di espansi in PVC per la produzione di pannelli compositi utilizzati in campo eolico e navale

I materiali polimerici espansi sono utilizzati come core di pannelli compositi di tipo sandwich (tipicamente a base di polivinilcloruro, polistirene e poliuretani). Negli ultimi anni molte ricerche si sono concentrate sulla possibilità di aumentare le loro proprietà meccaniche, termiche, di resistenza agli agenti esterni, ignifughe, etc cercando contemporaneamente la diminuzione del peso e del costo (sia delle materia prime che di processo). In questo contesto, l’obiettivo di questa tesi di laurea è lo studio, la preparazione e la caratterizzazione di espansi in PVC di natura cross-linked per la produzione di pannelli compositi a sandwich potenzialmente utilizzabili in campo eolico e navale.

Finte pelli per interni auto in PVC: adeguamento ai requisiti REACH

Le finte pelli sono sistemi costituiti da vari strati, il cui componente principale è il PVC. La produzione delle finte pelli richiede l’utilizzo di un elevato numero di additivi; per ognuno di essi occorre valutare la quantità da utilizzare, l’efficienza in rapporto al suo costo e, non di minore importanza, il suo grado di tossicità. Gli additivi attualmente utilizzati nella produzione delle finte pelli, che presentano problemi legati alla sicurezza sono: gli ftalati (plastificanti), l’azodicarbonammide (agente espandente) e il triossido di antimonio (agente antifiamma). Il lavoro di tesi è stato incentrato sullo studio di queste materie prime allo scopo di trovare delle valide alternative rispetto ai composti standard, in relazione agli attuali (e probabili futuri) requisiti del REACH e produrre una finta pelle “migliorata” in termini di prestazioni e sicurezza.

Finte pelli in PVC: utilizzo e proprietà in mescola di plastificanti e ritardanti di fiamma ecosostenibili e non tossici

Il presente lavoro di tesi sperimentale prende in considerazione diverse possibili alternative ai plastificanti (in particolare alla famiglia degli ftalati) e ritardanti di fiamma (triossido di antimonio) ampiamente utilizzati al giorno d’oggi nella produzione di finte pelli in PVC, anticipando in questo modo possibili restrizioni future imposte dalla normativa REACH: quattro ftalati a basso peso molecolare (Benzil-ButilFtalato, Di-ButilFtalato, Di-Iso-ButilFtalato, e Di-2-Etil-EsilFtalato) sono già stati proibiti ed il triossido di antimonio è inserito nella lista delle sostanze candidate a possibili restrizioni. Le limitazioni all’uso di queste sostanze è dovuta agli effetti negativi sulla salute e sull’ambiente causati da queste sostanze: gli ftalati a basso peso molecolare possono interferire nei cicli ormonali; il triossido di antimonio è un sospetto cancerogeno, è pericoloso per inalazione ed è considerato causa di pneumoconiosi e irregolarità cardiache dei lavoratori a contatto con esso. Inoltre, l’antimonio è un inquinante persistente, bioaccumulabile e tossico (PBT). Sono stati presi in esame 21 plastificanti appartenenti a varie categorie (sebacati, adipati, trimellitati, fosfati, benzoati, …), coi quali sono state prodotte foglie di PVC plastificato. Le foglie sono state sottoposte a caratterizzazione tramite spettroscopia FT-IR ed a test sia di natura meccanica (durezza, resistenza meccanica, etc.) che focalizzati a determinare proprietà legate al loro uso finale (migrazione del plastificante, resistenza alla fiamma, stabilità termica, etc.). Tra i migliori plastificanti individuati vi sono i trimellitati ed alcuni plastificanti da fonti rinnovabili (azelati, tetravalerati). Sono state investigate singolarmente le proprietà di 5 tipologie di ritardanti di fiamma in sostituzione del triossido di antimonio (a varie percentuali di additivazione nel materiale) e di 3 miscele di ritardanti allo scopo di valutare eventuali effetti sinergici. Le foglie additivate con questi ritardanti di fiamma sono state caratterizzate tramite analisi termiche specifiche: analisi al cono calorimetro e analisi TGA accoppiata ad FT-IR, utili per la comprensione dei meccanismi di azione dei ritardanti di fiamma e della loro influenza sulla degradazione termica del PVC plastificato. Infine, le foglie sono state sottoposte ai classici test di resistenza meccanica, resistenza alla fiamma, stabilità termica, ecc. I migliori ritardanti di fiamma individuati sono: ipofosfito di calcio, sali carbossilati ed allumina triidrata, da soli o miscelati con zinco idrossistannato.

The influence of PVC wrapping on the performance of two laser fluorescence devices on occlusal surfaces in vitro

OBJECTIVE: The aim of this study was to determine the influence of polyvinyl chloride (PVC) wrapping on the performance of two laser fluorescence devices (LF and LFpen) by assessing tooth occlusal surfaces. BACKGROUND DATA: Protection of their tips may influence LF measurements. To date there are no studies evaluating the influence of this protection on the performance of the LFpen on permanent teeth, or comparing it to the original LF device. MATERIALS AND METHODS: One hundred nineteen permanent molars were assessed by two experienced dentists using the LF and the LFpen devices, both with and without PVC wrapping. The teeth were histologically prepared and assessed for caries extension. RESULTS: The LF values with and without PVC wrapping were significantly different. For both LF devices, the sensitivity and accuracy were lower when the PVC wrapping was used. The specificity was statistically significantly higher for the LFpen with PVC. No difference was found between the areas under the ROC curves with and without PVC wrapping. The ICC showed excellent interexaminer agreement. The Bland and Altman method showed a range between the upper and the lower limits of agreement of 63.4 and 57.8 units for the LF device, and 49.4 and 74.2 for the LFpen device, with and without PVC wrapping, respectively. CONCLUSIONS: We found an influence of the PVC wrapping on the performance of the LF and LFpen devices. However, since its influence on detection of occlusal caries lesions is considered for, the use of one PVC layer is suggested to avoid cross-contamination in clinical practice.