Performance of layers submitted to different forced-molting methods and different temperatures

This study was carried out to evaluate the performance and egg quality of laying hens, in their second laying cycle submitted to different forced-molting methods and three environmental temperatures. Six hundred layers were distributed in a completely randomized experimental design with 15 treatments with five replicates of eight birds each, according to 5x3 factorial arrangement (molting methods vs. temperatures). The following forced-molting methods were applied: 90%, 70%, 50% dietary alfalfa inclusion, addition of 2,800 ppm zinc, and feed fasting. Temperatures were: 20 ºC, 27 ºC and 35 ºC. At the end of each period of the second laying cycle, bird performance and egg quality were evaluated. Data were submitted to analysis of variance and means were compared by orthogonal and polynomial contrasts. The highest alfalfa inclusion level (90% alfalfa and 10% basal diet) proved to be efficient as compared to the other methods, independently of temperature.

Analytical Validation of Quantitative High-Performance Liquid Chromatographic Methods in Pharmaceutical Analysis: A Practical Approach

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Parameterized fast decoupled power flow methods for obtaining the maximum loading point of power systems. Part II. Performance evaluation

The parameterized fast decoupled power flow (PFDPF), versions XB and BX, using either theta or V as a parameter have been proposed by the authors in Part I of this paper. The use of reactive power injection of a selected PVbus (Q(PV)) as the continuation parameter for the computation of the maximum loading point (MLP) was also investigated. In this paper, the proposed versions obtained only with small modifications of the conventional one are used for the computation of the MLP of IEEE test systems (14, 30, 57 and 118 buses). These new versions are compared to each other with the purpose of pointing out their features, as well as the influence of reactive power and transformer tap limits. The results obtained with the new approaches are presented and discussed. The results show that the characteristics of the conventional FDPF method are enhanced and the region of convergence around the singular solution is enlarged. In addition, it is shown that these versions can be switched during the tracing process in order to efficiently determine all the PV curve points with few iterations. A trivial secant predictor, the modified zero-order polynomial, which uses the current solution and a fixed increment in the parameter (V, theta, or mu) as an estimate for the next solution, is used for the predictor step. (C) 2003 Elsevier B.V. All rights reserved.

Beak trimming methods and their effect on the performance and egg quality of Japanese quails (Coturnix japonica) during lay

A total number of 720 Japanese quail females, reared under identical management conditions, and receiving feed and water ad libitum, was used. Quails were housed and reared from 1-35 days of age in litter pens in a rearing house, and then were transferred to a quail layer house. This study aimed at verifying if different beak trimming method could optimize egg production and quality by reducing stress and cannibalism among birds. A completely randomized experimental design was used, with six treatments in a 2x3 factorial arrangement, with two beak trimming ages (14 and 21 days) and three beak trimming variants (non-trimmed, 1/3 of the beak trimmed, or 1/2 of the beak trimmed), 6 replicates of 20 birds each. Performance was evaluated by feed intake, percentage of lay, egg mass, feed conversion ratio per dozen and per kg eggs, and mortality. Performance was influenced by trimming variant, with the best results obtained by birds with intact and those with 1/3 of the beak trimmed. Better specific gravity was in quails submitted to beak trimming at 21 days of age, whereas other egg quality parameters did not present significant results. Based the results obtained in the present study, it is recommended to submit to beak trimming either at 14 or 21 days of age.

Beak-trimming methods and their effect on the performance of japanese quail pullets (Coturnix japonica)

This study aimed at verifying if beak-trimming methods in Japanese quail pullets could optimize production by decreasing stress caused by cannibalism. A total number of 816 day-old Japanese quails was distributed in a completely randomized experimental design in a 2 x 3 factorial arrangement, with two beak-trimming ages (14 and 21 days of age) and three beak-trimming sizes (not trimmed, 1/3 trimmed, or 1/2 trimmed), and 4 replicates of 34 birds per replicate. Birds were submitted to the same management and feeding conditions. Weight gain, feed intake, feed conversion ratio, and mortality were evaluated. There was no significant effect of age at beak trimming on the evaluated parameters (P>0.05), as well as no significant interaction between age at beak trimming, and beak-trimming method. There was a significant effect (P<0.01) of trimming size on performance, with the best performance observed in birds not submitted to beak trimming or had 1/2 of the beak trimmed. When the beak was more aggressively trimmed (1/2), parameters were worse. According to the obtained results, it is recommended to trim 1/3 of the beaks, which can be performed either at 14 or 21 days of age.

Forced-Molting methods and their effects on the performance and egg quality of japanese quails (Coturnix japonica) in the second laying cycle

The experiment was carried out in the experimental poultry house of the Research and Development Unit of Brotas of Agência Paulista de Tecnologia dos Agronegócios do Centro-Oeste, SP, Brazil. The objective of the study was to evaluate the performance of Japanese quails submitted to forced molting aiming at optimizing the use of the same quail flock by promoting a second laying cycle. A total number of 400 67-day-old Japanese quails in lay, previously submitted to 14 days of forced molting, was distributed in a completely randomized experimental design into five treatments (T1= not submitted to forced molting, T2= 03 days of fasting + fed ad libitum, T3= 01 days of fasting + 13 days of feed restriction, T4= 02 days of fasting + 12 days of feed restriction, and T5= 03 days of fasting + 11 days of feed restriction. Feeds were contained equal nutrient levels, and were formulated according to NRC (1994) recommendations. There were significant differences among the studied treatments. Although the treatment of 3 days of fasting followed by ad libitum feeding resulted in lower egg weight, it promoted better lay percentage, egg mass, and feed conversion ratios (FCR/dz and FCR/kg). on the other hand, 3 days of fasting followed by restricted feeding resulted in higher feed intake and worse feed conversion ratios (FCR/dz and FCR/kg). When birds were not submitted to forced molting, they presented lower lay percentage and egg mass.

The effects of alternative forced-molting methods on the performance and egg quality of commercial layers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The performance of conventional and fluorescence-based methods for occlusal caries detection An in vivo study with histologic validation

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Performance of fluorescence methods, radiographic examination and ICDAS II on occlusal surfaces in vitro

This study compared the performance of fluorescence-based methods, radiographic examination, and International Caries Detection and Assessment System (ICDAS) II on occlusal surfaces. One hundred and nineteen permanent human molars were assessed twice by 2 experienced dentists using the laser fluorescence (LF and LFpen) and fluorescence camera (FC) devices, ICDAS II and bitewing radiographs (BW). After measuring, the teeth were histologically prepared and assessed for caries extension. The sensitivities for dentine caries detection were 0.86 (FC), 0.78 (LFpen), 0.73 (ICDAS II), 0.51 (LF) and 0.34 (BW). The specificities were 0.97 (BW), 0.89 (LF), 0.65 (ICDAS II), 0.63 (FC) and 0.56 (LFpen). BW presented the highest values of likelihood ratio (LR)+ (12.47) and LR- (0.68). Rank correlations with histology were 0.53 (LF), 0.52 (LFpen), 0.41 (FC), 0.59 (ICDAS II) and 0.57 (BW). The area under the ROC curve varied from 0.72 to 0.83. Inter- and intraexaminer intraclass correlation values were respectively 0.90 and 0.85 (LF), 0.93 and 0.87 (LFpen) and 0.85 and 0.76 (FC). The ICDAS II kappa values were 0.51 (interexaminer) and 0.61 (intraexaminer). The BW kappa values were 0.50 (interexaminer) and 0.62 (intraexaminer). The Bland and Altman limits of agreement were 46.0 and 38.2 (LF), 55.6 and 40.0 (LFpen) and 1.12 and 0.80 (FC), for intra- and interexaminer reproducibilities. The posttest probability for dentine caries detection was high for BW and LF. In conclusion, LFpen, FC and ICDAS II presented better sensitivity and LF and BW better specificity. ICDAS II combined with BW showed the best performance and is the best combination for detecting caries on occlusal surfaces. Copyright (C) 2008 S. Karger AG, Basel.

Development and application of methods for determination of residual monomer in dental acrylic resins using high performance liquid chromatography

Two high-performance liquid chromatographic methods for determination of residual monomer in dental acrylic resins are described. Monomers were detected by their UV absorbance at 230 nm, on a Nucleosil((R)) C-18 (5 mu m particle size, 100 angstrom pore size, 15 x 0.46 cm i.d.) column. The separation was performed using acetonitrile-water (55:45 v/v) containing 0.01% triethylamine (TEA) for methyl methacrylate and butyl methacrylate, and acetonitrile-water (60:40 v/v) containing 0.01% TEA for isobutyl methacrylate and 1,6-hexanediol dimethacrylate as mobile phases, at a flow rate of 0.8 mL/min. Good linear relationships were obtained in the concentration range 5.0-80.0 mu g/mL for methyl methacrylate, 10.0-160.0 mu g/mL for butyl methacrylate, 50.0-500.0 mu g/mL for isobutyl methacrylate and 2.5-180.0 mu g/mL for 1,6-hexanediol dimethacrylate. Adequate assay for intra- and inter-day precision and accuracy was observed during the validation process. An extraction procedure to remove residual monomer from the acrylic resins was also established. Residual monomer was obtained from broken specimens of acrylic disks using methanol as extraction solvent for 2 h in an ice-bath. The developed methods and the extraction procedure were applied to dental acrylic resins, tested with or without post-polymerization treatments, and proved to be accurate and precise for the determination of residual monomer content of the materials evaluated. Copyright (c) 2005 John Wiley & Sons, Ltd.

Modeling a spatially restricted distribution in the Neotropics: How the size of calibration area affects the performance of five presence-only methods

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Use of Yucca schidigera extract in broiler diets and its effects on performance results obtained with different coccidiosis control methods

A trial was conducted to assess the effects of the dietary supplement Yucca schidigera extract on the performance of broilers subjected to different coccidiosis control methods. Six hundred male broiler chicks were randomly allocated to 1 of 5 treatments with 4 replicates each. The treatments were as follows: T1, vaccinated against coccidiosis; T2, nonvaccinated, a dietary coccidiostat; T3, vaccinated against coccidiosis, diet supplemented with Y. schidigera extract (0.01%); T4, coccidiostat plus Y. schidigera extract added to feed (0.01%); and T5, nonvaccinated, nonsupplemented control. The parameters analyzed were bird performance and morphology of the intestinal mucosal surface. The intestinal villi were higher at 6 d of age in broilers treated with coccidiostats or vaccinated against coccidiosis and supplemented with Y. schidigera extract compared with groups receiving the vaccine only or no treatment. Addition of the Y. schidigera extract to the diet of vaccinated birds improved average daily gain and feed conversion rate at 42 d of age compared with the other treatments, suggesting there might be a beneficial, synergistic effect between the coccidiosis vaccine and the Y. schidigera extract.

Performance of Layers Submitted to Different Forced Molting Methods and Different Temperatures

This study was carried out to evaluate the performance and egg quality of laying hens, in their second laying cycle submitted to different forced-molting methods and three environmental temperatures. Six hundred layers were distributed in a completely randomized experimental design with 15 treatments with five replicates of eight birds each, according to 5x3 factorial arrangement (molting methods vs. temperatures). The following forced-molting methods were applied: 90%, 70%, 50% dietary alfalfa inclusion, addition of 2,800 ppm zinc, and feed fasting. Temperatures were: 20 degrees C, 27 degrees C and 35 degrees C. At the end of each period of the second laying cycle, bird performance and egg quality were evaluated. Data were submitted to analysis of variance and means were compared by orthogonal and polynomial contrasts. The highest alfalfa inclusion level (90% alfalfa and 10% basal diet) proved to be efficient as compared to the other methods, independently of temperature.

Traditional and novel methods for occlusal caries detection: Performance on primary teeth

This study aimed to assess the performance of International Caries Detection and Assessment System (ICDAS), radiographic examination, and fluorescence-based methods for detecting occlusal caries in primary teeth. One occlusal site on each of 79 primary molars was assessed twice by two examiners using ICDAS, bitewing radiography (BW), DIAGNOdent 2095 (LF), DIAGNOdent 2190 (LFpen), and VistaProof fluorescence camera (FC). The teeth were histologically prepared and assessed for caries extent. Optimal cutoff limits were calculated for LF, LFpen, and FC. At the D 1 threshold (enamel and dentin lesions), ICDAS and FC presented higher sensitivity values (0.75 and 0.73, respectively), while BW showed higher specificity (1.00). At the D 2 threshold (inner enamel and dentin lesions), ICDAS presented higher sensitivity (0.83) and statistically significantly lower specificity (0.70). At the D 3 threshold (dentin lesions), LFpen and FC showed higher sensitivity (1.00 and 0.91, respectively), while higher specificity was presented by FC (0.95), ICDAS (0.94), BW (0.94), and LF (0.92). The area under the receiver operating characteristic (ROC) curve (Az) varied from 0.780 (BW) to 0.941 (LF). Spearman correlation coefficients with histology were 0.72 (ICDAS), 0.64 (BW), 0.71 (LF), 0.65 (LFpen), and 0.74 (FC). Inter- and intraexaminer intraclass correlation values varied from 0.772 to 0.963 and unweighted kappa values ranged from 0.462 to 0.750. In conclusion, ICDAS and FC exhibited better accuracy in detecting enamel and dentin caries lesions, whereas ICDAS, LF, LFpen, and FC were more appropriate for detecting dentin lesions on occlusal surfaces in primary teeth, with no statistically significant difference among them. All methods presented good to excellent reproducibility. © 2012 Springer-Verlag London Ltd.

Performance of race instrumentation system in curved root canals: a comprehensive analysis by three study methods

In this study, curved maxillary molar root canals were instrumented with RaCe rotary system to evaluate: 1. the occurrence of canal transportation using a radiographic platform; 2. the action of the instruments on the dentin walls, centering ability and canal enlargement by analysis of digital images; and the percentage of regular dentin surfaces and debris within the canal by histological analysis. Ten mesiobuccal roots of extracted human maxillary molars were embedded in acrylic resin and sectioned at the middle and apical thirds. Root canal shaping was performed using the RaCe rotary system at 250 rpm and 1 Ncm torque. Each instrument set was used five times according to a crowndown technique in the following sequence: 40/0.10, 35/0.08, 25/0.06, 25/0.04, 25/0.02 (working length - WL), 30/0.02 (WL) and 35/0.02 (WL). Each instrument was inserted until resistance was felt and then pulled back, followed by brushing movements towards all canal walls. Each specimen was assessed by three study methods: radiographic platform, digitized image assessment and histological analysis. The radiographic platform showed lack of apical transportation. No statistically significant difference (Wilcoxon test, p>0.05) was found between the middle and apical thirds regarding instrument action on dentin walls, centering ability, area of root canal enlargement, percentage of regular dentin surfaces and debris within the root canal. It may be concluded that RaCe system is a suitable method for the preparation of curved root canals, regarding the maintenance of root canal original path, action on dentin walls, canal enlargement and removal of debris from the root canal lumen.