Biomass fast pyrolysis energy balance of a 1kg/h test rig

The present paper offers a methodological approach towards the estimation and definition of enthalpies constituting an energy balance around a fast pyrolysis experiment conducted in a laboratory scale fluid bed with a capacity of 1 kg/ h. Pure N2 was used as fluidization medium at atmospheric pressure and the operating temperature (∼500°C) was adjusted with electrical resistors. The biomass feedstock type that was used was beech wood. An effort was made to achieve a satisfying 92.5% retrieval of products (dry basis mass balance) with the differences mainly attributed to loss of some bio-oil constituents into the quenching medium, ISOPAR™. The chemical enthalpy recovery for bio-oil, char and permanent gases is calculated 64.6%, 14.5% and 7.1%, respectively. All the energy losses from the experimental unit into the environment, namely the pyrolyser, cooling unit etc. are discussed and compared to the heat of fast pyrolysis that was calculated at 1123.5 kJ per kg of beech wood. This only represents 2.4% of the biomass total enthalpy or 6.5% its HHV basis. For the estimation of some important thermo-physical properties such as heat capacity and density, it was found that using data based on the identified compounds from the GC/MS analysis is very close to the reference values despite the small fraction of the bio-oil components detected. The methodology and results can help as a starting point for the proper design of fast pyrolysis experiments, pilot and/or industrial scale plants.

Estudo de métodos de tratamento de efluentes (troca iônica e eletroquímico) separados e sequenciais para eliminação de derivados de petróleo

The produce of waste and the amount of the water produced coming from activities of petroleum production and extraction has been a biggest challenge for oil companies with respect to environmental compliance due to toxicity. The discard or the reuse this effluent containing organic compounds as BTEX (benzene, toluene, ethylbenzene and xylene) can cause serious environmental and human health problems. Thus, the objective this paper was study the performance of two process (separately and sequential) in one synthetic effluent for the benzene, toluene and xylene removal (volatile hydrocarbons presents in the produced water) through of electrochemical treatment using Ti/Pt electrode and exchange resin ionic used in the adsorption process. The synthetic solution of BTX was prepared with concentration of 22,8 mg L-1, 9,7 mg L-1 e 9,0 mg L-1, respectively, in Na2SO4 0,1 mol L-1. The experiments was developed in batch with 0.3 L of solution at 25ºC. The electrochemical oxidation process was accomplished with a Ti/Pt electrode with different current density (J = 10, 20 e 30 mA.cm-2). In the adsorption process, we used an ionic exchange resin (Purolite MB 478), using different amounts of mass (2,5, 5 and 10 g). To verify the process of technics in the sequential treatment, was fixed the current density at 10 mA cm-2 and the resin weight was 2.5 g. Analysis of UV-VIS spectrophotometry, chemical oxygen demand (COD) and gas chromatography with selective photoionization detector (PID) and flame ionization (FID), confirmed the high efficiency in the removal of organic compounds after treatment. It was found that the electrochemical process (separate and sequential) is more efficient than absorption, reaching values of COD removal exceeding 70%, confirmed by the study of the cyclic voltammetry and polarization curves. While the adsorption (separately), the COD removal did not exceed 25,8%, due to interactions resin. However, the sequential process (electrochemical oxidation and adsorption) proved to be a suitable alternative, efficient and cost-effectiveness for the treatment of effluents petrochemical.

Estudo de tensoativos na organofilização de argila bentonítica para uso em fluido de perfuração à base de óleo

Due to the great challenges encountered in drilling wells, there is a need to develop fluids with appropriated properties and able to meet all the requirements of drilling operations. The physicochemical and rheological properties must be carefully controlled so that a fluid can exercise all its functions. In perforations sensitive to contact with water and "offshore", it becomes necessary the use of oil based drilling fluids, but the bentonite clay cannot be used without a previous surface modification so that their surfaces become hydrophobic. Lately, the oil companies in Brazil use imported organoclays in the preparation of oil-based drilling fluids. The study aimed to modify a calcium clay to increase the affinity of the same organic phase of oil-based drilling fluids, applying three surfactants (OCS, CTAB and UTM 150) at different concentrations. The results indicated that the surfactants UTM 150 and CTAB showed better results compared to OCS. Considering the type of surfactant and concentration as variables used in the statistical analysis, the results indicated that only the surface tension and concentration of calcium oxide in response to organophilization process showed statistically significant effects. The organophilizated clay has potential for application in oil-based drilling fluids.

Sustentabilidade das empresas associadas à REDEPETRO-RN

The present study investigated the management of social, environmental and economic sustainability practices employed by 72 oil companies in Rio Grande do Norte state in Brazil associated to Joint Business Network for Enhancing the Competitive Ability of Suppliers of Goods and Services to the Gas and Oil Industry in Rio Grande do Norte (REDEPETRO-RN). Thus, our investigation aimed to determine the extent to which sustainability practices of companies associated to REDEPETRO-RN are developed through their own efforts or influenced by the Triple Helix interorganizational arrangement (governamental organizations, education and research institutions, and industries). The research instrument used was a questionnaire in order to map and characterize the sustainability practices. The research subjects were business owners and managers. The data collected supported the descriptive, correspondence and correlation analyzes. Were identified a greater emphasis of the companies surveyed in developing sustainability practices and greater economic influence of business organizations in the construction of sustainability status. It was concluded with confirmation of thesis of the REDEPETRO-RN arrangement exhibits the characteristics and functioning of a common Interorganizational Cooperative Arrangement, not those of a triple helix interorganizational arrangement, given that the influences exerted for the development of social, environmental and economical sustainability on the part of teaching and research institutions, and government and business organizations do not interact with one another sufficiently to create a virtuous circle of cooperation among the associated companies. By contrast, the Interorganizational Cooperative Arrangement plays an important role in strengthening the competitiveness of companies affiliated to REDEPETRO-RN, by combining different competencies in an attempt at supporting the adoption of sustainability practices, a role reinforced by the scope of PETROBRAS, which, due to its economic importance, has considerable weight in the managerial decisions of associated companies

Readings in the UK energy security

Over the last few decades, the debate about “Peak Oil” became increasingly common and frustrating to governments, oil companies, and individuals. Also in the last decade or so, some unusual events took place which have raised the concern about the future of energy resources. These events lead policy makers to consider what is known today as “Energy Security.” The UK is one of these countries that fears the unknown future should petroleum resources worldwide become scarce or vanish. After the dwindling of the North Sea production, the UK found itself on the brink of losing its energy self-sufficiency. This article asks the questions: Has the UK’s oil and gas production peaked yet? If so, does the UK have a serious energy security problem, and if so, how may this problem be solved and what are the possible short, medium, and long-term solutions for such a concern? In answering these questions, the article discusses the concerns and challenges to the UK energy security and brings about the government plans for tackling these concerns. It is found that the UK does not experience an energy security problem on the short to medium-term, but it may suffer energy insecurity on the longer-term.

Sustentabilidade das empresas associadas à REDEPETRO-RN

The present study investigated the management of social, environmental and economic sustainability practices employed by 72 oil companies in Rio Grande do Norte state in Brazil associated to Joint Business Network for Enhancing the Competitive Ability of Suppliers of Goods and Services to the Gas and Oil Industry in Rio Grande do Norte (REDEPETRO-RN). Thus, our investigation aimed to determine the extent to which sustainability practices of companies associated to REDEPETRO-RN are developed through their own efforts or influenced by the Triple Helix interorganizational arrangement (governamental organizations, education and research institutions, and industries). The research instrument used was a questionnaire in order to map and characterize the sustainability practices. The research subjects were business owners and managers. The data collected supported the descriptive, correspondence and correlation analyzes. Were identified a greater emphasis of the companies surveyed in developing sustainability practices and greater economic influence of business organizations in the construction of sustainability status. It was concluded with confirmation of thesis of the REDEPETRO-RN arrangement exhibits the characteristics and functioning of a common Interorganizational Cooperative Arrangement, not those of a triple helix interorganizational arrangement, given that the influences exerted for the development of social, environmental and economical sustainability on the part of teaching and research institutions, and government and business organizations do not interact with one another sufficiently to create a virtuous circle of cooperation among the associated companies. By contrast, the Interorganizational Cooperative Arrangement plays an important role in strengthening the competitiveness of companies affiliated to REDEPETRO-RN, by combining different competencies in an attempt at supporting the adoption of sustainability practices, a role reinforced by the scope of PETROBRAS, which, due to its economic importance, has considerable weight in the managerial decisions of associated companies

Sistema supervisor inteligente para procesos de producción de petróleo

Maximizar la producción de pozos de crudo pesado y extra pesado es el principal beneficio que se desea obtener de los sistemas de control que están corrientemente operativos en empresas de petróleo. Dada la naturaleza compleja y cambiante con el tiempo de los métodos existentes de levantamiento artificial para extracción de crudo, se dificulta el cumplimiento de las especificaciones pre establecidas para el procesamiento del crudo por parte de los lazos de control regulatorios. Tomando esto en cuenta, en éste trabajo se propone un sistema de supervisión inteligente que permite detectar cambios en las condiciones de operación del proceso productivo y realizar ajustes automáticos de sus consignas. Además, el sistema supervisor propuesto tiene la capacidad de detectar fallas en los sensores involucrados en los lazos de control, garantizando de esta manera una operación confiable del proceso. La propuesta fue probada en un pozo de petróleo real obteniéndose resultados que superaron las expectativas iniciales.

Influência da adição do NaCl e KCl em sistemas de pastas contendo sílica para poços de petróleo em zonas evaporíticas e carbonáticas

One of the major challenges faced nowadays by oil companies is the exploration of pre-salt basins. Thick salt layers were formed in remote ages as a consequence of the evaporation of sea water containing high concentrations of NaCl and KCl. Deep reservoirs can be found below salt formations that prevent the outflow of oil, thus improving the success in oil prospection. The slurries used in the cement operations of salt layers must be adequate to the properties of those specific formations. At the same time, their resulting properties are highly affected by the contamination of salt in the fresh state. It is t herefore important to address the effects of the presence of salt in the cement slurries in order to assure that the well sheath is able to fulfill its main role to provide zonal isolation and mechanical stability. In this scenario, the objective of the present thesis work was to evaluate the effect of the presence of NaCl and KCl premixed with cement and 40% silica flour on the behavior of cement slurries. Their effect in the presence of CO2 was also investigated. The rheological behavior of slurries containing NaCl and KCl was evaluated along with their mechanical strength. Thermal and microstructural tests were also carried out. The results revealed that the presence of NaCl and KCl affected the pozzolanic activity of silica flour, reducing the strength of the hardened slurries containing salt. Friedel´s salt was formed as a result of the bonding between free Cl- and tricalcium aluminate. The presence of CO2 also contributed to the degradation of the slurries as a result of a process of carbonation/bicarbonataion

Análise paramétrica da simulação composicional do processo de Drenagem Gravitacional Assistida por Gás (GAGD)

In Brazil and around the world, oil companies are looking for, and expected development of new technologies and processes that can increase the oil recovery factor in mature reservoirs, in a simple and inexpensive way. So, the latest research has developed a new process called Gas Assisted Gravity Drainage (GAGD) which was classified as a gas injection IOR. The process, which is undergoing pilot testing in the field, is being extensively studied through physical scale models and core-floods laboratory, due to high oil recoveries in relation to other gas injection IOR. This process consists of injecting gas at the top of a reservoir through horizontal or vertical injector wells and displacing the oil, taking advantage of natural gravity segregation of fluids, to a horizontal producer well placed at the bottom of the reservoir. To study this process it was modeled a homogeneous reservoir and a model of multi-component fluid with characteristics similar to light oil Brazilian fields through a compositional simulator, to optimize the operational parameters. The model of the process was simulated in GEM (CMG, 2009.10). The operational parameters studied were the gas injection rate, the type of gas injection, the location of the injector and production well. We also studied the presence of water drive in the process. The results showed that the maximum vertical spacing between the two wells, caused the maximum recovery of oil in GAGD. Also, it was found that the largest flow injection, it obtained the largest recovery factors. This parameter controls the speed of the front of the gas injected and determined if the gravitational force dominates or not the process in the recovery of oil. Natural gas had better performance than CO2 and that the presence of aquifer in the reservoir was less influential in the process. In economic analysis found that by injecting natural gas is obtained more economically beneficial than CO2

Estudo da perda de carga e calor no poço injetor no processo De drenagem gravitacional assistida por vapor (SAGD)

The oil companies in the area in general are looking for new technologies that can increase the recovery factor of oil contained in reservoirs. These investments are mainly aimed at reducing the costs of projects which are high. Steam injection is one of these special methods of recovery in which steam is injected into the reservoir in order to reduce the viscosity of the oil and make it more mobile. The process assisted gravity drainage steam (SAGD) using steam injection in its mechanism, as well as two parallel horizontal wells. In this process steam is injected through the horizontal injection well, then a vapor chamber is formed by heating the oil in the reservoir and, by the action of gravitational forces, this oil is drained down to where the production well. This study aims to analyze the influence of pressure drop and heat along the injection well in the SAGD process. Numerical simulations were performed using the thermal simulator STARS of CMG (Computer Modeling Group). The parameters studied were the thermal conductivity of the formation, the flow of steam injection, the inner diameter of the column, the steam quality and temperature. A factorial design was used to verify the influence of the parameters studied in the recovery factor. We also analyzed different injection flow rates for the model with pressure drop and no pressure drop, as well as different maximum flow rates of oil production. Finally, we performed an economic analysis of the two models in order to check the profitability of the projects studied. The results showed that the pressure drop in injection well have a significant influence on the SAGD process.

Análise de Sustentabilidade em Projetos de Instalações de Produção de Petróleo

A proposal for a global analysis of sustainability in projects related in oil facilities is presented. By considering economic, environmental and social aspects in the early stages of design, the suggested method is more comprehensive and can be used to complement the analysis commonly applied in the petroleum industry, such as: Study of Technical and Economic Feasibility; Environmental Impact Assessment and Risk Analysis. Several authors, associations, certification bodies and oil companies suggest different approaches to study sustainability in some specific activities (or industries). In this study, a checklist of significant sustainability aspects for the oil industry (surface facilities) was assembled. In addition, a matrix was developed to assess the sustainability items relevant to these projects. In this work, the checklist interacts with the matrix to perform a "Preliminary Analysis of Sustainability of the Enterprise" (APSE). This method allows the identification of aspects that contribute significantly to global sustainability. From this analysis, which includes economic, social and environmental aspects, is built a report that is used to analyze qualitatively and quantitatively the impact of the sustainability aspects of the project. In this analysis are identified items that strongly influence the economic, social or environmental aspects and evaluated alternatives that can increase the overall sustainability of the project. Finally, the alternatives that can be used to indicate the most sustainable option are identified. This method was applied in a project (design) of a small offshore platform. This case study shows how the APSE can contribute to the identification of sustainability initiatives for the enterprise. The results showed that relevant aspects can contribute decisively to global sustainability. Finally, it was observed that the proposed method can contribute to increased rates of sustainability, even after application of analysis commonly used in these projects

La seguridad energética de Estados Unidos a inicios del siglo XXI: ¿securitización o politización del acceso a recursos energéticos?

Tradicionalmente, la consolidación de la seguridad energética en Estados Unidos se ha mostrado como un asunto de seguridad nacional. En especial, la escasez de recursos energéticos ha sido vista como un problema existencial que requiere de medidas de emergencia en el marco de un proceso de securitización. Sin embargo, esta investigación surgiere que el tema ha sido mayoritariamente politizado a inicios del siglo XXI. Quizá este proceso de securitización tan solo fue implícitamente planteado con ocasión de la invasión a Irak en 2003, en la medida en que dicha intervención pudo haberse inspirado por la necesidad de derrocar a un régimen que había impedido el acceso estadounidense a recursos petroleros iraquíes. En este orden de ideas, la investigación analiza las políticas de seguridad energética de los gobiernos de George W. Bush y Barack H. Obama con el propósito de entender el grado en el que estas estuvieron vinculadas a sus respectivas agendas de seguridad nacional.

A multinacionális vállalatok szerepe a hazai klaszterekben = The role of multinational companies in Hungarian clusters

A cikk azt a kérdést vizsgálja, hogy milyen szerepet töltenek be a multinacionális vállalatok leányvállalatai a hazai klaszterekben, milyen a kapcsolatuk a klasztertag kis- és középvállalatokkal többek között a közös innovációban, a tudásközvetítésben, a klaszterek reputációjának növelésében. A felderítő kutatás a témát a hazai klaszterfejlesztési program, a Pólus Program által életre hívott három, úgynevezett akkreditált klaszter menedzsereivel, a klasztertag multinacionális vállalatok (MNV-k) hazai leányvállalatainak képviselőivel és a klasztertag KKV-k vezetőivel készült interjúk alapján mutatja be. A téma relevanciáját a program által potenciálisan indukált együttműködési folyamatok adják, mivel a klaszterfejlesztési pályázati konstrukciók úgy lettek kialakítva, hogy a klasztertag KKV-knak érdemes legyen nagyvállalatot is bevonniuk a közös innovációs és kutatás-fejlesztési projektekbe. A kutatási eredmények alapján az MNV leányvállalatainak leginkább a globális trendek és standardok klaszterbeli elterjesztésében van meghatározó szerepük, illetve a KKV-k és leányvállalatok közötti üzleti kapcsolatok alakításában kiemelt szerepe van a klasztermenedzsment-szervezet tevékenységének. ----- Abstract: The paper focuses on the topic which deals with the role of subsidiaries of multinational companies (MNC’s) in Hungarian industrial clusters in the fields of common innovation, knowledge transfer, and increasing the cluster’s reputation. The findings of the paper are based on an explorative research. Interviews were made with cluster managers, representatives of MNC’s subsidiaries, leaders of small and medium size (SME’s) enterprises operating in three accredited clusters created by the Hungarian cluster development program, the Pole Program. The relevance of the topic is given by the Program, which has induced potential cooperation between MNC’s subsidiaries and domestic SME’s in cluster environment in a way so the members of the cluster – SME’s and subsidiaries – were driven to cooperate in common innovation and R+D projects. Our research results suggest that MNC’s subsidiaries in Hungarian clusters seem to play a key role in the dissemination of global industrial trends and standards between the cluster members. The national cluster management organization can also play a decisive role in shaping business relationship between MNC’s and SME’s.

Transfer and Reverse Transfer of Knowledge of International Acquisitions: the case of the acquisition of the Perez Companc by Petrobras in Argentina

The objective of this article was to analyze the processes of transfer and reverse trans fer of knowledge following. international acquisitions made by Brazilian multinational companies. Reverse transfer is understood,as the process of transferring knowledge from the acquired company to the acquirer. Therefore, a case study was conducted on the acquisition of the Perez Companc group by Petrobras in Argentina. The study is qualitative. Primary data were obtained and eight members of the international managing board of Petrobras were interviewed. After the first moment of integration, reported as conflictive, there was a better integration of the companies, mainly in the technical areas of, the oil and gas exploration activities. The size of Perez Companc, its aim (a company of energy, not only oil and gas company) and the length of time were critical factors for the transfer of best practices between the companies. The expatriation of the employees is seen as a key-tool, as well as the technical visits, for the transfer of knowledge.. An. additional contribution of the study was to present the results of the research on the process of transfer and reverse transfer of knowledge in Brazilian multinational companies, since most studies on the theme focus on the motivators and challenges concerning these processes.

Knowledge management in multinational companies: the repatriates’ role in the competitive advantage in subsidiaries

This paper addresses the topic of knowledge management in multinational companies (MNCs). Its purpose is to examine the role of expatriates in knowledge acquisition and transfer within MNCs. Specifically it focuses on knowledge acquisition and transfer from one MNC head office located in Germany to two Portuguese subsidiaries as a basis for competitive advantage in their Portuguese subsidiaries. A qualitative research methodology is used, specifically through an exploratory case study approach, which examines how international assignments are important for the role of expatriates In knowledge acquisition and transfer between foreign head offices and their Portuguese subsidiaries. The data were collected through semi structured interviews to 10 Portuguese repatriates from two Portuguese subsidiaries of one foreign MNC. The findings suggest that the reasons that lead to expatriating employees from Portuguese subsidiaries to foreign head offices are connected to (1) knowledge management strategies to development the subsidiary’s performance; (2) new skills and knowledge acquisition by future team leaders and business/product managers in Portuguese subsidiaries; (3) procuring knowledge, from agents in head office, to be disseminated amongst co-workers in Portuguese subsidiaries; (4) acquiring global management skills, impossible to acquire locally and; (5) developing global projects within MNC. Also our results show that knowledge acquisition and transfer from foreign head office, through subsidiaries’ expatriates, contributes directly to the Portuguese subsidiaries’ innovation, improved performance, competitive advantage and growth in the economic sectors in which they operate. Moreover, evidence reveals that expatriation is seen as a strategy to fulfil some of the main organisational objectives through their expatriates (e.g., create new products and business markets, develop and incorporate new organisational techniques and processes, integrate global teams within multinational corporation with a responsibility on the definition of global objectives). The results obtained suggest that expatriates have a central role in acquiring and transferring strategic knowledge from MNC head office to their subsidiaries located in Portugal. Based on the findings, the paper discusses in detail the main theoretical and managerial implications. Suggestions for further research are also presented. The study’s main limitation is the small size of the sample, but its findings and methodology are quite original and significant.